IMEOM Dhaka 2019 - bim.portal.gov.bdbim.portal.gov.bd/sites/default/files/files/bim... · Textile Technology and Readymade Garments Energy, Renewable Energy and Bio-fuel Bio-Medical

IMEOM Dhaka 2019 2ndInternational Conference on Industrial and Mechanical

Engineering and Operations Management (IMEOM)

Date: 12-13 December, 2019 [Thu-Fri] Venue: Bangladesh Institute of Management (BIM), Sobhanbag, Mirpur Road, Dhaka 1207, Bangladesh ; www.ieombd.org/imeom2019

CALL FOR PAPERS Abstract Deadline:20 Sept201930 August 2019

Industrial Engineering and Operations Management(IEOM) Society of Bangladesh, a country chapter of IEOM society International, in collaboration with BIM is going to organize the 2nd International conference on Industrial and Mechanical Engineering and Operations Management (IMEOM) on 12-13 December, 2019 at Bangladesh Institute of Management (BIM), Dhaka Bangladesh. The objective of the conference is to share the knowledge and publish quality articles from the traditional and advanced areas, Engineering Management, Industrial Management, IPE and ME discipline thus bringing the professionals, engineers, academicians, researchers, and scientist community who will contribute in this conference by sharing their experiences and knowledge Scope: The conference scopes will be covering the various areas of Engineering Management, Industrial Management, Industrial and Production Engineering (IPE) and Mechanical Engineering (ME) topics including all new emerging technologies related to these fields of engineering and science. Publication: The accepted papers will be published in the conference proceedings which will be peer reviewed and will also available online. On the recommendation of the reviewers, selected papers will be also published in an international scientific journal of BIM. Conference Registration fees: The registration fee for a delegate covers a registration kit, conference proceedings, lunch, tea during the technical sessions and banquet.

Regular Registration Fee Early Registration Fee

Local Delegate BDT 5000 BDT 4000

Local Delegate (IEOM member/BIM Alumni) BDT 3500 BDT 3000

Foreign Delegate USD 400 USD 350

Foreign Delegate(IEOM Members) USD 300 USD 250

SAARC Delegate USD 300 USD 250

Accompanying Person (Local) BDT 2500 BDT 2000

Accompanying Person (Foreign) USD 50 USD 40

Student (Local) BDT 2500 BDT 2000

Student (Foreign/SAARC) USD 200 USD 150

Participant (Without Paper) BDT 5000 / USD 400 BDT 4000 / USD 350

IMPORTANT DATES Abstract submission : 20 Sept 2019 Notification of Acceptance of Abstract : 25 September 2019 Submission of Full Paper: 15 October2019 Notification of Acceptance of Paper : 5 November2019 Final Manuscript Due: 15 November 2019 Mode of Registration Fee payment: Please check the conference website

ME subject areas included, but not limited to: Fluid Mechanics and fluidics Compressible and incompressible Flow Aerodynamics Multiphase Flows Thermal Engineering Thermo-Fluid Mechanics Internal Combustion Engine Power Generation

IPE subject areas included, but not limited to: Supply Chain Management Management Information Systems Operations Management Business and Innovation Manufacturing Engineering Economy Energy Management Quality Control and Management Ergonomics & Human Factors Engineering Product Design & Development Sustainability and Green System Energy, Environment and Innovation Technology Management Virtual Reality Automation and Control Engineering Smart Materials and Composites Operations Research CAD/CAM and Industry 4.0 Computer Integrated Manufacturing Facility Planning, Layout Design and Material handling Micro and Nano Manufacturing Advance manufacturing process Reliability and Maintenance Management Simulations Artificial Intelligence Knowledgebase Engineering Concurrent Engineering Occupational Health and Safety Instrumentation & Measurements Engineering Management Textile Technology and Readymade Garments

Energy, Renewable Energy and Bio-fuel Bio-Medical Engineering Heating and Ventilation Air conditioning and refrigeration Environmental Engineering Computational Fluid Dynamics Micro and Nano Design Automobile Engineering Further Information: Prof Dr. Mohammad Iqbal, Conference Chair, IPE Dept., SUST, Sylhet, Bangladesh Prof Dr. Md. Mamunur Rashid ,Conference Co-Chair, SMC and Head, Production Management Division, BIM, Dhaka, Bangladesh Prof Dr Mohammad Sarwar Morshed, Conference Co-Chair, MPE Deptt, AUST, Bangladesh Dr A R M Harunur Rashid, Conference Secretary, IUT, Dhaka, Bangladesh IMEOM Dhaka 2019 Secretariat BIM Email: [email protected] ; [email protected] Phone: +8801844056105; +8801712700412 Organized by:

Production Management Division, BIM

and

IEOM Society of Bangladesh

pg. 1

2nd International Conference on Industrial and Mechanical

Engineering and Operations Management 2019(IMEOM 2019) Thursday 12

th December and Friday 13

th December 2019

Theme: Industry 4.0 for Sustainable Development

Sl

Designation Name

Affiliation Conveners of subject

committees

Organising Committee

1. Chair Prof. Dr. Mohammad Iqbal SUST Panel Discussion,

Awards, Sponsor,

Reception

2. Co-chair Prof. Dr. Md. Mamunur Rashid BIM Finance, Registration,

Venue, Transport,

Logistics, Food,

Accommodation

3. Co-chair Prof Dr. M Sarwar Morshed AUST Technical,

4. Conference

Secretary

Dr. A.R.M. Harunur Rashid IUT Communication, Website

& other media

5. Member Prof Dr M Kutubuddin KUET

6. Member Prof Dr.Md. NurulAbsarChowdhury IUT

7. Member Prof Dr Shamsuddin Ahmed IUT

8. Member Prof Dr. Md. Mosharraf Hossain RUET Engineering Education

Symposium

9. Member Prof Dr. Md. Iqbal Mahmud MBSTU

10. Member Prof. Dr. Sultana Parveen BUET Women in Academia &

Industrial Engineering

11. Member Engr SK Masum Kamal INDUSTRY Industry

12. Member Prof Dr. Md. Haider Ali Biswas KU

13. Member Prof. Dr. A M M Mukaddes SUST Workshop

14. Member Dr. A.S.M. Mojahidul Hoque JUST Students Competitions

15. Member Dr. Mamun Habib BRACU

16. Member Prof Dr. Lal Mohan Baral AUST

17. Member Dr. Uttam Kumar Datta BIM

18. Member Md. Mahbubul Alam BIM

19. Member Akhund Ahammad Shamsul Alam BIM

20. Member Engr. Md. Tariqul Islam BIM

21. Member Engr Md. Mehboob Hasan Kallol BIM

22. Member S.M. Ariful Islam BIM

23. Member Mohammad Mainul Islam BIM

pg. 2

Venue: Bangladesh Institute of Management (BIM), Sobhanbag, Mirpur

Road, Dhaka 1207, Bangladesh;

Website: www.ieombd.org/imeom2019

The international conference (IMEOM 2019) invites research papers from the academics, professionals,

engineers, researchers, technologists and scientist from all over the world. Industrial Engineering and

Operations Management (IEOM) Society of Bangladesh and Production Management Division,

Bangladesh Institute of Management is going to organize the 2nd

International conference on Industrial and

Mechanical Engineering and Operations Management (IMEOM 2019) at BIM, Dhaka, Bangladesh. The

objective of the conference is to share the knowledge and publish quality articles from the traditional and

advanced areas Industrial Management, IPE and ME discipline. The conference scopes will be covering

the various areas of Engineering Management, Industrial Management, Industrial and Production

Engineering (IPE) and Mechanical Engineering (ME) topics including all new emerging technologies

related to these fields of engineering and science. Our aim is to bring the professionals, engineers,

academicians, researchers, and scientist community who will contribute in this conference by sharing

their experiences and knowledge. The accepted papers will be published in the indexed conference

proceedings which will be peer reviewed and will also available online.

Terms of Reference (TOR):

Looking after overall management of the conference.

Conveners of different subject committees should be selected from the organizing committee members.

Conveners could co-opt two members whereas other members should be endorsed by the organizing

committee.

24. Member Md. Aminul Islam BIM

25. Member Tanvir Hossain BIM

26. Member M. Amenoor BIM

27. Member Mohammad Sayeedur Rahman BIM

28. Member NirjharMazumder BIM

29. Member ShaikhSajibur Rahman BIM

30. Member Md. Rajibul Hoque BIM

31. Member Mamun Muztaba BIM

32. Member Dr. Ahad Ali Exe Dir,

IEOM Int

International Cooperation

33. Member Dr. Khadem Dir Prog,

IEOM Int

Program Liaison

pg. 3

Chief Patron:

Tahmina Akhter, Director General, BIM

Patrons:

Dr. Parveen Ahmed, Director, BIM

Engr. Abu Naser Md. Shahidullah, Director, BIM

Advisory Committee

Name Description

Professor Dr. M.H.Khan President, BSME and Ex Vice- Chancellor, AUST& BUET, Bangladesh

Professor Dr. Anwar Hossain Ex Vice- Chancellor, AUST& IUT, Bangladesh

Professor Dr. Mohd. Rafiqul Alam Beg Ex Vice- Chancellor, RUET, Bangladesh

Professor Dr. AFM Anwarul Haque Prof,Dept. of MPE, AUST, Bangladesh

Professor Junichi Tamaki Japan

Professor Sharif Ullah Japan

Prof. Dr. Md. Rafiqul Islam Sheikh Vice- Chancellor, RUET, Bangladesh

Prof Dr Fazlee Elahi Ex Vice- Chancellor, IUT, Bangladesh

Professor Dr. M.S. J. Hashmi Dublin City University, Ireland

Prof Dr M. Imtiaz Hossain Ex Vice- Chancellor, IUT, Bangladesh

Professor Dr. Iqbal Hossain Ex Director, BIT,Chittagong and Former Prof,IUT,MCE

Prof. ShyamalKantiBiswas EX- Vice-Chancellor, CUET , and Prof,Dept. of IPE, AUST, Bangladesh

Professor Md Khaled Khalil Dept. of Mechanical Engineering, DUET, Bangladesh

Prof Dr. Md. Abdur RazzaqAkhanda Pro VC, Sonargaon University, Former Head, MCE,IUT

Professor Dr.MohammedAlauddin Vice-Chancellor, DUET, Bangladesh

Professor Dr. Mohammad Rofiqul Islam Vice-Chancellor, CUET, Bangladesh

Professor Dr. A.K.M. Sadrul Islam General Secretary,BSME, Former Head, MCE, IUT

Prof Dr M A Rashid Sarkar MIST, Bangladesh

Professor Dr. Tajul Islam Dept. of Mechanical Engineering, CUET, Bangladesh

Professor Dr. AKM Nurul Amin MIST, Bangladesh

Prof Dr Jamal Uddin CUET

Prof Yong Tack Im KIST, South Korea

Prof Trung Pham Birmingham University, UK

Prof Dr Raisuddin Khan IIUM, Malaysia

Prof Dr Mustafizur Rahman NUS, Singapore

Prof Abu Masud Wichita Univ, USA

Prof Dr Monoj K Tawari IIT, India

Prof Abdur Rahim UNB, Canada

Dr Alamgir A Chowdhury Western Michigan Univ, USA

Prof B K Bala JUST, former Prof, Bangladesh Agricultural University

Professor Dr. Abdullahil Azeem

IPE, BUET

Prof. Dr. Mohammad Rofiqul Islam Dept. of Mechanical Engineering, RUET, Bangladesh

pg. 4

Committees

Technical Committee

Sl Name Affiliation Designation

Prof Dr Mohammad Sarwar Morshed AUST Convener

Prof. Dr. Md. Mamunur Rashid BIM Co-Convener

Dr A R M Harunur Rashid IUT Member Secretary

Prof. Dr. Mohammad Iqbal SUST Chair, IEOM Bangladesh Chapter and Prof, IPE, SUST

Prof Dr. Kais Bin Zaman BUET Head, IPE

Prof. Md. Abdul Hannan Miah DUET Head, IPE

Col Md Humayun Kabir Bhuiyan MIST Head, IPE

Dr. Kazi Afzalur Rahman CUET Head, MIE

Dr. Kazi Arif-Uz-Zaman KUET Head, IEM

SUST Head, IPE

Brig Gen M Mustafa Kamal

MIST Ex-Head, IPE

Prof. Dr. Md. Mosharraf Hossain RUET Head, IPE

Prof Dr Md Zahid Hossain IUT Head, MCE

Prof. Dr. Jamal Uddin Ahamed CUET Head, ME

Prof. Dr. Md. Nurul Islam RUET Head, ME

Prof. Dr. Sobahan Mia KUET Head, ME

Prof Dr. MdAriful Islam SUST Head, ME

Prof Dr Dewan Hasan Ahmed AUST Head, MPE

Prof Dr. Ashraful Islam BUET Head, ME

Prof. Dr. Mohammad Zoynal Abedin DUET Head, ME

Col Md Humayun Kabir Bhuiyan, psc MIST Head, ME

Dr. Md. Abdus Shahid DUET Head, Textile Eng

Prof Dr A K M Masud BUET IPE

Professor Nikhil RanjanDhar BUET IPE

Professor Dr. M. Ahsan AkhtarHasin BUET IPE

Prof Dr. Mohammad Muhsin Aziz Khan SUST IPE

Prof Dr. Muhammad Mahmood Hasan

SUST IPE

Prof Dr. Md. Abu Hayat Mithu SUST IPE

Dr. Malek Miguel Maalouf

Research Fellow, Aalborg-AUST POHS Research Project

pg. 5

Dr Mamun Habib BRAC BRAC Business School

Prof Dr Jamaluddin Ahmed CUET ME

Prof Dr Ali BUTEX Textile

Prof Dr Iqbal Mahmud MBSTU Head, Textile Engg

Prof Dr. Hasan M Mostofa Afroz DUET IPE

Prof Dr Mahbubul Alam MIST ??? CUET???

Dr Faisal Kader MIST ME

Prof Dr Mahbub Hasan MME BUET

Dr Hasanuzzaman GCE BUET

Terms of Reference (TOR): The committee will prepare a list of reviewers for different research areas. Send papers to the reviewers and get the review done on time. Allocate accepted papers to different sessions according to track Preparing the proceedings of the conference with full papers and abstract book Preparing electronic means of dissemination like DVD for the proceeding and abstract book.

Finance, Accounts, & Registration Committee

Sl Designation Name Uni/Company Description

Convener Prof. Dr. Md. Mamunur Rashid BIM

Member Dr. A.R.M. Harunur Rashid IUT

Member Mohammad Humayun Kabir BIM

Member S M Ashraful Alam BIM

Member Md. Ekramul Haque BIM

Member JaduLal Sarkar BIM

Terms of Reference (TOR): Preparing the budget for the conference Keeping all invoices, money receipts, work orders, quotation letters etc. To Spend and receive money on behalf of the conference. Collection of money for registration from the participants Preparing financial report at the end of the conference. To Design and arrange bags, pens, brochures, posters, banners, crests, certificates, interior decoration

Accommodation



Member

Dr. Mohammad SarwarMorshed AUST




pg. 6

Student Volunteers: 2 from AUST, 2 from IUT, 2 from JUST, 2 from SUST, 2 from BIM


To assist the participants to get the accommodation in Dhaka.

Website, Facebook page, Print & Electronic Media Affairs


Convener Dr. A.R.M. Harunur Rashid IUT

Member





Development and maintaining of the website and hosting Development and maintaining the Facebook event page of the conference. Dedicated photographers to capture important moments. Preparation of press releases with photos and distribution to different electronic and print media.

Food and Venue Management



Member


Member Dr. A.R.M. Harunur Rashid IUT

Member Md. Rabiul Islam Khan BIM






Venue hire, seating arrangement, microphone setting, directional sign arrangement, banner and

backdrop making and putting up

pg. 7

Arrangement of lunches and tea break during the conference and conference dinner/lunch will be

served at conference venue.

Workshop


Convener Prof Dr. AbulMukid Mohammad Mukaddes SUST

Member Engr SK Masum Kamal

SK Machinery Int

Member Dr. A.S.M. MojahidulHoque JUST


Organize the workshops Moderate the workshop presentations

Students Competitions


Convener Dr. A.S.M. MojahidulHoque JUST

Member

Lecturer, AUST

Member

Lecturer, JUST


Organize the competition themes

Briefing the student participants, forming jury committees, and evaluations

Sponsors and Advertisement Management


1 Convener Prof Dr Mohammad Iqbal SUST 2 Member Prof. Dr. Md. Mamunur Rashid BIM 3 Member Engr SK Masum Kamal

4 Member Dr. Mohammad SarwarMorshed AUST 5 Member Dr. A.R.M. Harunur Rashid IUT

Prof Dr M. Kutubuddin KUET

Prof Dr Bodiul Salam CUET ME

Prof Dr. Md. MosharrafHossain RUET

Prof Dr. Md. Kamruzzaman DUET

Prof Dr A K M Masud BUET IPE


Prepare the documents for sponsors’ collection

Collect the advertisement and logs

Reception (VIP Management)


pg. 8

1 Convener Prof Dr Mohammad Iqbal 2 Member Prof. Dr. Md. Mamunur Rashid BIM

3 Member Prof Dr.Md. NurulAbsarChowdhury 4 Member Engr SK Masum Kamal 5 Member Dr. Mohammad SarwarMorshed AUST

6 Member Dr. A.R.M. Harunur Rashid IUT

Prof Dr Md ZahidHossain IUT Prof, MCE, IUT

Professor Dr. Mohammad Muhsin Aziz Khan SUST

Dr. A.S.M. MojahidulHoque JUST

Prof Kader KUET

Prof Dr. Md. MosharrafHossain RUET

Prof Dr Ali BUTEX

Md. Rabiul Islam Khan BIM

S M Ashraful Alam BIM


The committee will decide about the VIP management

Panel Discussion


1 Convener Prof Dr Mohammad Iqbal SUST 2 Member Prof Dr. Mohammad SarwarMorshed AUST 3 Member Dr. A.R.M. Harunur Rashid IUT 4 Member Prof. Dr. Md. Mamunur Rashid BIM 5 Member Engr SK Masum Kamal

Industry


Convenor

Prof Dr. Md. Iqbal Mahmud MBSTU

Member

Member Engr SK Masum Kamal


The industry (RMG or Electronic Assembly Plant or Automobile Assembly Plant) will be selected around

Dhaka

Presentation at the industry premises and selection of speaker(S)

Program Liasion


Convener DrMohammad Khadem Sultan Qubbos University

Member

pg. 9

Member


Program planning and communications

Register of the communication and follow if any changes

Awards


1 Convener Prof Dr Mohammad Iqbal SUST 2 Member Prof. Dr. Md. Mamunur Rashid BIM 3 Member Engr SK Masum Kamal SK Machinery Int 4 Member Dr. Mohammad Sarwar Morshed AUST 5 Member Dr. A.R.M. Harunur Rashid IUT


Formation of the best paper jury panel, evaluation system, and announcement of best paper awards

Women in Academia and Industrial Engineering


1 Convener Prof. Dr. Sultana Parveen BUET 2 Member Farkhunda Dorin BIM 3 Member Lamia Farha BIM 4 Member AklimaZaman BIM

Engineering Education Symposium


1 Convener Prof Dr. Md. MosharrafHossain RUET 2 Member

3 Member

International Cooperation


1 Convener Dr Ahad Ali Exe Dir, IEOM Int 2 Member

3 Member

pg. 10

Transport and Logistics


1 Convener Prof. Dr. Md. Mamunur Rashid BIM 2 Member Prof Dr. Md. Iqbal Mahmud MBSTU 3 Member S M Ashraful Alam BIM

To assist the participants to get transport in Dhaka.

ABSTRACT SUBMISSION GUIDELINES

Personal Derails: Title: Prof/Dr/Mr/Ms/ First Name, LAST NAME of each Author(s); Name and address of the Institution : email address of author and coauthors if any: Abstract Title: in a line or two Abstract: Within 200 worlds without any reference Keywords: Maximum five words What an Abstract Must Include: Statement of the Problem or problem/innovation investigates Materials or methods used Results and brief analysis Justify how the result is new and important for the research community State the significance of the research outcome Note: Please do not provide any figure or table or formula in the abstract PUBLICATION OPPORTUNITIES

Conference Proceedings:

Outstanding papers will be considered for the international peer reviewed online proceeding (e.g. under

AIP). Subject to revision of the paper as per comments received at the conference.

Area of the conference presentation and publication IMEOM 2019

IPE Subject Area: Engineering Management Textile Technology and Readymade Garments Manufacturing Work Design & Measurement

pg. 11

Engineering Economy Energy Management Quality Control and Management Ergonomics & Human Factors Engineering Product Design & Development Sustainability and Green System Energy, Environment and Innovation Technology Management Virtual Reality Industrial and Production Engineering CAD/CAM and Industry 4.0 Computer Integrated Manufacturing Facility Planning, Layout Design and Material handling Micro and Nano Manufacturing Advance manufacturing process Industrial Robot and robotics Reliability and Maintenance Management/Engineering Supply Chain Management Management Information Systems Production planning and Control Operations Management Automation and Control Engineering Smart Materials and Composites Operations Research Simulations Artificial Intelligence Knowledgebase Engineering Concurrent Engineering Business and Innovation Industrial Safety and Green Manufacturing Occupational Health and Safety Instrumentation & Measurements ME Subject Areas: Fluid Mechanics and fluidics Compressible and incompressible Flow Aerodynamics Multiphase Flows Thermal Engineering Thermo-Fluid Mechanics Internal Combustion Engine Power Generation Energy, Renewable Energy and Biofuel Bio-Medical Engineering Heating and Ventilation Air conditioning and refrigeration Environmental Engineering Computational Fluid Dynamics

pg. 12

Micro and Nano Design Automobile Engineering The international conference (IMEOM 2019) invites research papers from the academics, professionals,

engineers, researchers, technologists and scientist from all over the world on anyone of the following

areas of research:

Publication Opportunities:

Conference Proceedings: All accepted abstract and full papers will be published in the referred

conference proceedings with ISBN and will be published electronically through AIP or Procedia.

Certificates, Awards and Written Feedback Report:

Best paper awards will be announced at the conference dinner and all awardee will receive certificate.

Unlike many other conferences, all authors will receive written evaluation report on the paper

presented which will aid them to improve the paper.

Conference Kits/Bag, Lunch, Dinner, and Tea Break: This conference is featured by several feedings such

as arrival, morning and after-noon break-foods, hot buffet lunch and gala conference dinner, in addition

to conference materials such as conference bag, pen and paper, name badge and printed conference

program. Registration Fee starts from Taka 3000 (US$ 100 for Foreign Participants) which includes all

facilities such inclusion of the paper in the proceedings, feedings and prizes. There will be an industrial

tour as an option and you will be required to registrar separately.

Further Information:

Prof Mohammad Iqbal, Conference Chair and Chair Paper Review Committee, SUST, Sylhet, Bangladesh

Prof. Dr. Md. Mamunur Rashid, Conference Co-Chair, SMC and Head, Production Management Division,

BIM, Dhaka, Bangladesh.

Prof Dr Mohammad Sarwar Morshed, Conference Co-Chair, IPE, AUST, Bangladesh

Dr A R M Harunur Rashid, Conference Secretary, IUT, Dhaka, Bangladesh

Documents

IMEOM Dhaka 2019 - bim.portal.gov.bdbim.portal.gov.bd/sites/default/files/files/bim... · Textile Technology and Readymade Garments Energy, Renewable Energy and Bio-fuel Bio-Medical