CIGNAL ADVISORYFor Postpaid Plans 430 HD, 590 HD, 990 HD, 1290 HD and 1590 HD Subscribers:
There will be a software upgrade applicable to subscribers with 2 or more Digital Boxes only on October 26.
Note: These upgrade procedures do not apply to:
• Subscribers living in condominiums • Subscribers in commercial establishments
There are 2 Key Steps to ensure that your boxes capture the upgradeKey Step 1: To Prepare for the Software Upgrade- Before 2:00 am, Oct 20, 2012
Key Step 2: During the Software Upgrade - After 6:00 am, Oct 20, 2012
HD DIGITAL BOXHUMAX
KEY STEP 1:TO PREPARE FOR THE SOFTWARE UPGRADE
Before 6:00am, October 20, 2012For Plans 430 HD, 590 HD, 990 HD, 1290 HD & 1590 HD
TO PREPARE FOR THE SOFTWARE UPGRADEFor Plan 430 HD, 590 HD, 990 HD, 1290 HD
& 1590 HD - before Oct. 26, 2012
Identify the Main Digital Box.Identify the TV that you use to watch most of the time.
This will be your Main TV and Digital Box.
Step 1
2nd 3rd1st
Main TV
KEY STEP 1: TO PREPARE FOR THE SOFTWARE UPGRADE - BEFORE 2:00 AM, OCT. 26, 2012
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
How to set your Digital Box LNB Power (On/O�)
On your Remote Control Unit, press the OK button to bring up the Home Screen.
a
Step 2Switch “ON” the LNB Power of your Main Digital Box.
Set the LNB Power of the Main Digital Box to "ON".
In Home Screen menu, select "Settings" and press the OK button.
b Enter the correct PIN code (default is "0000", “9999” or "9998").
c
KEY STEP 1: TO PREPARE FOR THE SOFTWARE UPGRADE - BEFORE 2:00 AM, OCT. 26, 2012
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
Select "System Setup" and press the OK button.d Select "Installation Setup" and press the OK button.e
KEY STEP 1: TO PREPARE FOR THE SOFTWARE UPGRADE - BEFORE 2:00 AM, OCT. 26, 2012
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
Select "Satellite Setup" and press the OK button.f Select LNB Powering and set to "ON" or “OFF”.g
Press the OK button until you go back to the installation set up screen then press the Exit button to go to full screen view.
h
KEY STEP 1: TO PREPARE FOR THE SOFTWARE UPGRADE - BEFORE 2:00 AM, OCT. 26, 2012
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
Step 3Switch “OFF” the LNB Power of the other Digital Boxes.Set the LNB Power of the other Digital Boxes to "OFF".
You may now continue watching.
LNB Set-upMain Digital Box
ON OFF
3rd Digital Box
ON OFF
2nd Digital Box
ON OFF
KEY STEP 1: TO PREPARE FOR THE SOFTWARE UPGRADE - BEFORE 2:00 AM, OCT. 26, 2012
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
How to set your Digital Box LNB Power (On/O�)
On your Remote Control Unit, press the OK button to bring up the Home Screen.
a
In Home Screen menu, select "Settings" and press the OK button.
bEnter the correct PIN code (default is "0000", “9999” or "9998").
c
TO PREPARE FOR THE SOFTWARE UPGRADE - BEFORE 2:00 AM, OCT. 26, 2012KEY STEP 1: TO PREPARE FOR THE SOFTWARE UPGRADE - BEFORE 2:00 AM, OCT. 26, 2012
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
Select "System Setup" and press the OK button.d Select "Installation Setup" and press the OK button.e
KEY STEP 1: TO PREPARE FOR THE SOFTWARE UPGRADE - BEFORE 2:00 AM, OCT. 26, 2012
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
Select "Satellite Setup" and press the OK button.f Select LNB Powering and set to "ON" or “OFF”.g
Press the OK button until you go back to the installation set up screen then press the Exit button to go to full screen view.
h
KEY STEP 1: TO PREPARE FOR THE SOFTWARE UPGRADE - BEFORE 2:00 AM, OCT. 26, 2012
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
12
6
9 3
OCT 2012
FRIDAY26
Before 2:00am
For Plan 430 HD, 590 HD, 990 HD, 1290 HD & 1590 HD
Step 4(To be performed on Oct. 25)
On October 25, before you sleep, switch o� all your Digital Boxesbut keep them plugged in their power outlets.
Please proceed to the next part of the Software Upgrade Procedures on October 20 after 6:00 am.
KEY STEP 1: TO PREPARE FOR THE SOFTWARE UPGRADE - BEFORE 2:00 AM, OCT. 26, 2012
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
KEY STEP 2:DURING THE SOFTWARE UPGRADE
After 6:00am, October 20, 2012For Plans 430 HD, 590 HD, 990 HD, 1290 HD & 1590 HD
HD DIGITAL BOXHUMAX
KEY STEP 2: DURING THE SOFTWARE UPGRADE - AFTER 2:00 AM, OCT. 26, 2012
When you wake up...
System Setup
Software Version XXXXXXX
Switch on your Main TV and Main Digital Box after 6:00am.
Step 1
Step 2
Check the Software Version of your Main Digital Box.
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
KEY STEP 2: DURING THE SOFTWARE UPGRADE - AFTER 2:00 AM, OCT. 26, 2012
a On your Remote Control Unit, press the OK button to bring up the Home Screen.
b In Home Screen menu, select "Settings" and press the OK button.
How to check your Digital BoxSoftware Version.
c Enter the correct PIN code (default is "0000", “9999” or "9998").
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
KEY STEP 2: DURING THE SOFTWARE UPGRADE - AFTER 2:00 AM, OCT. 26, 2012
Select "System Setup" and press the OK button.de Select "Diagnostics" and press the OK button.
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
KEY STEP 2: DURING THE SOFTWARE UPGRADE - AFTER 2:00 AM, OCT. 26, 2012
f
g
Check the current Release Number.
Release Number: 105
The correct Release Number indicated should be 105.
h Press the Exit button to exit the Settings screen.
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
KEY STEP 2: DURING THE SOFTWARE UPGRADE - AFTER 2:00 AM, OCT. 26, 2012
If the Software Version matches what is indicated in the Digital Box Guide, proceed to Step 4.
If the Software Version does not match what is indicated in the Digital Box Guide, switch o� the power of the
Main Digital Box and keep it plugged in the outlet.
Wait for 1 hour then proceed to Step 3.
Step 3Turn on your Main Digital Box.
If the upgrade is ongoing, you will see a progress barshowing percentage completion.
75%10 min
Wait 20-30 minutes for this to finish.
Once upgrade progress is completed, proceed to Step 4.
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
KEY STEP 2: DURING THE SOFTWARE UPGRADE - AFTER 2:00 AM, OCT. 26, 2012
Unplug the Main Digital Boxand proceed to the 2nd/3rd Digital Box.
Step 4
1st
For 2nd and 3rd Digital BoxesStep 1
Unplug your 3rd Digital Box (if any) before turningon your 2nd TV & 2nd Digital Box.
Step 2Switch on your 2nd TV and 2nd Digital Box.
Step 3Check the Software Version of your 2nd Digital Box.
System Setup
Software Version XXXXXXX
POWER ON
2nd
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
KEY STEP 2: DURING THE SOFTWARE UPGRADE - AFTER 2:00 AM, OCT. 26, 2012
a On your Remote Control Unit, press the OK button to bring up the Home Screen.
b In Home Screen menu, select "Settings" and press the OK button.
How to check your Digital BoxSoftware Version.
c Enter the correct PIN code (default is "0000", “9999” or "9998").
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
KEY STEP 2: DURING THE SOFTWARE UPGRADE - AFTER 2:00 AM, OCT. 26, 2012
Select "System Setup" and press the OK button.d e Select "Diagnostics" and press the OK button.
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
KEY STEP 2: DURING THE SOFTWARE UPGRADE - AFTER 2:00 AM, OCT. 26, 2012
f
g
Check the current Release Number.
Release Number: 105
The correct Release Number indicated should be 105.
h Press the Exit button to exit the Settings screen.
If the Software Version matches what is indicated in the Digital Box Guide, proceed to Step 6.
If the Software Version does not matchwhat is indicated in the Digital Box Guide, proceed to Step 4.
Step 4Set the LNB Power of the 2nd Digital Box to "ON".
LNB Power
ON OFF
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
KEY STEP 2: DURING THE SOFTWARE UPGRADE - AFTER 2:00 AM, OCT. 26, 2012
How to set your Digital Box LNB Power (On/O�)
On your Remote Control Unit, press the OK button to bring up the Home Screen.
a
In Home Screen menu, select "Settings" and press the OK button.
b Enter the correct PIN code (default is "0000", “9999” or "9998").
c
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
KEY STEP 2: DURING THE SOFTWARE UPGRADE - AFTER 2:00 AM, OCT. 26, 2012
2
Select "System Setup" and press the OK button.d Select "Installation Setup" and press the OK button.e
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
KEY STEP 2: DURING THE SOFTWARE UPGRADE - AFTER 2:00 AM, OCT. 26, 2012
Select "Satellite Setup" and press the OK button.f Select LNB Powering and set to "ON" or “OFF”.g
Press the OK button until you go back to the installation set up screen then press the Exit button to go to full screen view.
h
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
KEY STEP 2: DURING THE SOFTWARE UPGRADE - AFTER 2:00 AM, OCT. 26, 2012
Step 5Switch o� the 2nd Digital Box.
Keep the box plugged in the power outlet. Wait for 1 hour before checking again, then repeat Step 2.
Step 6Set the LNB Power of the 2nd Digital Box
to "OFF" then unplug the box.
LNB Power
ON OFF
POWER OFF
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
KEY STEP 2: DURING THE SOFTWARE UPGRADE - AFTER 2:00 AM, OCT. 26, 2012
Step 7If you have a 3rd Digital Box, repeat Steps 1 to 5
(For 2nd and 3rd Digital Boxes).
Note: After successfully completing the Software Upgradesfor your Main and other Digital Boxes, all boxes are unplugged.
Wait for five (5) seconds.
Plug in and turn on your TVs and Digital Boxesto enjoy your regular programming.
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
AFTER SUCCESSFUL SOFTWARE UPGRADE
Enjoy your programming!
*TelCo carrier SMS charges apply
POWER ON
1st
POWER ON
2nd
POWER ON
3rd
Text SOFTWARE UPGRADE <space> NAME <space>ACCT NO. <space> SMART CARD NO. <space> EMAIL ADDRESS
send to 391-800-8000* to claim your FREE Pacquiao-Marquez PPV (Pay-Per-View) this December.
This software upgrade procedure is applicable to subscribers with 2 or more Digital Boxes only. These do not apply to residents living in condominiums and subscribers in commercial establishments.
AFTER THE SOFTWARE UPGRADE - AFTER 2:00 AM, OCT. 26, 2012