DN 250 / DN 300 DN 150
HAWLE-COMBIFLEXThe modular versatility
NEW
DN 150DN 250 / DN 300
DN 150DN 250 / DN 300
2 | HAWLE
1 1
1
2
2
23 3
3
4
4
HAWLE-COMBIFLEXThe modular versatility
Fastening point on middle section
Fastening point on floor
Ground-distance set
Even installation dimensionsbased on nominal diameter
Quality anti-tamper seal
Fastening on frame
Illustrations, technical data, dimensions (all dimensions in mm) and weights (all weights in kg) are subject to alteration without notice.
ZAK 34 (DN 150) / ZAK 46 - outlet
for service connections, sensors, injection systems, etc.
Since 1966 Hawle is continuously working on the technolgy of Combi-Valves. Hawle-Combis facilitate a space-saving installation due to the short length and reduce material, working and storage costs. Additional, Combi Valves are reducing the amount of connections which have to be jointed together by the installer.
The new modular HAWLE-Combiflex is now available in the dimensions DN 150, DN 250 and DN 300 up to PN 16. The HAWLE-Combiflex can be adjusted to the particular needs of each pipeline interconnection. For the horizontal connections we provide the variable reducing valves in well-proven Hawle E2 Valve technology available from DN 80 to DN 400 with integrated ZAK-socket, as well as end caps with ZAK-socket.
DN 150DN 250 / DN 300
HAWLE | 3
5
5
66
77
88
8
HAWLE - GUARANTEE OF QUALITY
E2 valve technologySpare parts and accessories
High-quality corrosion protection
Spindle quality „DUPLEX stainless steel“
Vertical outlet with flange gasketfor hydrants and air valves
Integrated lifting hooks
All parts can be individually attached using existing manholes
Free passage
Tension-free connection system
Illustrations, technical data, dimensions (all dimensions in mm) and weights (all weights in kg) are subject to alteration without notice.
End cap with ZAK 69 - DN 250 / DN 300 ZAK 46 - DN 150 - outlet
4 | HAWLE
4420E2 10/16 150
80
80/100 210
100
125
150
200
150-200
DN 150
DN 150
150-150 150-125 150-100 150-80
DN 100
DN 80
HAWLE-COMBIFLEXProduct range DN 150
Illustrations, technical data, dimensions (all dimensions in mm) and weights (all weights in kg) are subject to alteration without notice.
Order no. VersionMOP(PN)
Dimensions / DN
Possible reduction / DNPossible vertical outlet
/ DNmax.
Weight
Individuallyconfigurable
Flange sized and drilled in accordance with EN 1092-2 standard PN 10. Please specify PN 16 when ordering. Standard version inclusive operating caps (remove in case of actuation by extension spindle or handwheel!)Please use the HAWLE-COMBIFLEX order form. It can be found on our homepage.
End cap
No. 4190E2
ZAK 46
No. 8640
No. 8642
No. 6979No. 6980
No. 8644
All outlets can be individually configured.
NEW
H H1
BØ KØ d4
DNØ d2
L
DN
C
f
Ø K
Ø D
H
H1
Ø d1
ac
ZAK 34
HAWLE | 5
DN
DN Ø D* C Ø K Ø d4 f Ød2 a c Ød1 H H1* L* B*
150
8010
200 19 160 133
3
8 M16 19
19,3 38
25 100
ZAK 34
372 488 258 213 21,816
10010
220 19 180 153 8 M16 19 25 100 372 488 261 213 22,516
12510
250 19 210 183 8 M16 19 25 100 372 497 259 213 23,716
15010
285 19 240 209 8 M20 23 28 150 462 604 262 283 34,716
200+ 10340 20 295 264
8M20 23 28 150 462 632 281 283 40,0
16 12
150/200 150/150 150/125 150/100 150/80
No. 4190E2HAWLE-COMBIFLEX E2 GATE VALVE
Illustrations, technical data, dimensions (all dimensions in mm) and weights (all weights in kg) are subject to alteration without notice.
HAWLE-COMBIFLEX E2 gate valve
Flange Bolts Spindle Valve
MOP(PN) Qty. Thread Wedge
DN Service outlet Weight
* Transport dimensions+ height compensation due to flange necessary
Optional ZAK 34 outletOrder-No. 6979ZAK-plugOrder-No. 6980
Optional Operating capOrder-No. 2157Order-No. 2158
• Without operating cap • Incl. bolt fastener for the middle section• Fits through manhole openings
Reducing gate valve
300/400300/200 250/200
300/150 250/150
300/300 250/250
300/250
6 | HAWLE
DN 300DN 250
DN 100
DN 150
4420E2
10250
150 100465200
16 150250
10300
150100
706200250
16 150300400
HAWLE-COMBIFLEXProduct range DN 250 / DN 300All outlets can be individually configured.
Order no. ModelMOP(PN)
Dimensions/DN
Possible reduction/DN
Possible vertical outlet/DN
Max. weight
Individuallyconfigurable
No. 8644 optional
No. 8642 No. 4190E2
No. 8640
ZAK 46
ZAK 69
End cap
Illustrations, technical data, dimensions (all dimensions in mm) and weights (all weights in kg) are subject to alteration without notice.
Flange sized and drilled in accordance with EN 1092-2 standard PN 10. Please specify PN 16 when ordering. Standard version inclusive operating caps (remove in case of actuation by extension spindle or handwheel!)Please use the HAWLE-COMBIFLEX order form. It can be found on our homepage.
B
H H1
Ø d1
Ø KØ d4L
C
f
a
H
c
Ø K
H1
Ø D
DN
ZAK 46
DNØ d2
300/400 300/300250/250
300/200250/200
300/150250/150
300/250
HAWLE | 7
DN
DN Ø D C Ø K Ød2 a c Ød1 H H1* L* B*
250
15010
285 19 240 8 M20 23 24,3 48 32 200
ZAK 46
561 727 337 356 61,016
20010
340 20 2958
M20 23 24,3 48 32 200 561 730 337 356 62,016 12
25010
400 22350
12M20 23
27,3 48 34 250 670 870 337 438 89,016 355 M24 28
300
15010
285 19 240 8 M20 23 24,3 48 32 200 561 754 361 356 65,0
16
20010
340 20 2958
M20 23 24,3 48 32 200 561 754 361 356 66,016 12
25010
400 22350
12M20 23
27,3 48 34 250 670 870 361 438 93,016 355 M24 28
30010
455 24,5400
12M20 23
27,3 48 34 300 753 981 361 523 132,016 410 M24 28
400+ 10580 28
51516
M24 2827,3 48 34 300 753 1050 361 523 146,0
16 525 M27 31
No. 4190E2HAWLE-COMBIFLEX E2 GATE VALVE
* Transport dimensions+ height compensation due to flange necessary
Illustrations, technical data, dimensions (all dimensions in mm) and weights (all weights in kg) are subject to alteration without notice.
• ZAK 46 socket• Incl. ZAK 46 plug• Without operating cap• Incl. bolt fastener for the middle section• Fits through manhole openings
Reduced gate valve
ZAK 46
Optional Operating CapOrder-No. 2157Order-No. 2158
HAWLE-COMBIFLEX E2 gate valve
Flange Bolts Spindle Valve
MOP(PN) Qty. Thread Wedge
DNService outlet Weight
L
ZAK
B
HØ DØ KØ d4
DN
Ø d2
fC
8 | HAWLE
DNB L
150 177 ZAK 46 47 3,0
250 284 ZAK 69 67 5,5
300 335 ZAK 69 77 8,0
DN
DN Ø D C Ø K Ø d4 f Ø d2 H
15080
10200 19 160 133 3 8 M16 19 155 6,9
16
10010
220 19 180 153 3 8 M16 19 155 7,716
250100
10220 19 180 153 3 8 M16 19 146 12,0
16
15010
285 19 240 209 3 8 M20 23 146 11,016
300100
10220 19 180 153 3 8 M16 19 160 13,0
16
15010
285 19 240 209 3 8 M20 23 160 13,016
HAWLE-COMBIFLEXAccessories and spare parts
HAWLE-COMBIFLEX end cap
ZAK-socket Weight
HAWLE-COMBIFLEX vertical outlet
Flange Bolts Vertical outlet
MOP (PN) Qty. Thread Weight
• ZAK socket
• Incl. affixed elastomer flange gasket
Illustrations, technical data, dimensions (all dimensions in mm) and weights (all weights in kg) are subject to alteration without notice.
HAWLE-COMBIFLEX End capNo. 8640
HAWLE COMBIFLEX vertical outletwith integrated flat gasket
No. 8642
10 (D
N 2
50/3
00)
7 (D
N 1
50)
HAWLE | 9
DN 150
DN 250/DN 300
Illustrations, technical data, dimensions (all dimensions in mm) and weights (all weights in kg) are subject to alteration without notice.
Stainless steel
HAWLE-COMBIFLEX ground-distance setcontaining 4 washers
No. 8644 (order separately)
HAWLE-COMBIFLEX order formCan be found on our homepage (hawle.com)
BESTELL- oder ANFRAGEFORMULARHAWLE-COMBIFLEX DN 150
Kunde:
Bestellnummer Kunde:
Ansprechpartner:
Lieferadresse:
Datum:
gewünschter Liefertermin:
Telefonnummer:
Mittelteil Nennweite 4x: DN 150
Druckstufe: PN 10 PN 16
Vertikalabgang: DN 80 DN 100
Schließrichtung: rechts links
Kreuzen Sie die Kombination entsprechend ihren Wünschen an.Bitte verwenden Sie für jedes HAWLE-COMBIFLEX ein eigenes Formular!
Bestellung Anfrage
Schieber mit Flansch: DN 80
DN 100
DN 125
DN 150
DN 200
Abgang am Schieber: AG 1"
ZAK 34
Blinddeckel: anstelle Schieberoberteil
Endkappe mit ZAK 46: DN 150
Schieber mit Flansch: DN 80
DN 100
DN 125
DN 150
DN 200
Abgang am Schieber: AG 1"
ZAK 34
Blinddeckel: anstelle Schieberoberteil
Endkappe mit ZAK 46: DN 150
Schieber mit Flansch: DN 80
DN 100
DN 125
DN 150
DN 200
Abgang am Schieber: AG 1"
ZAK 34
Blinddeckel: anstelle Schieberoberteil
Endkappe mit ZAK 46: DN 150
Schieber mit Flansch: DN 80
DN 100
DN 125
DN 150
DN 200
Abgang am Schieber: AG 1"
ZAK 34
Blinddeckel: anstelle Schieberoberteil
Endkappe mit ZAK 46: DN 150
Datum und Unterschrift Kunde
12 DN 100
12 DN 100
DN 15012 DN 150
6 DN 100
6 DN 100
DN 1506 DN 150
3 DN 100
3 DN 100
DN 1503 DN 1509 DN 100
9 DN 100
DN 1509 DN 150DN150
18.9
.201
7
OPTIONAL:
Verankerungssystem: 550 mm
620 mm
With the order or offer form, you can order the parts you need to configure your HAWLE-Combiflex exactly how you need it on site, in no time at all. This document will accompany your customised HAWLE-Combiflex from the order process through to production and delivery.
BESTELL- oder ANFRAGEFORMULARHAWLE-COMBIFLEX DN 250/DN 300
Kunde:
Bestellnummer Kunde:
Bearbeiter:
Lieferadresse:
Datum:
gewünschter Liefertermin:
Telefonnummer:
Mittelteil Nennweite: DN 250 DN 300
Druckstufe: PN 10 PN 16
Vertikalreduzierung: DN 100 DN 150
Schließrichtung: rechts links
Verankerungssystem: 900 mm(optional)
Kreuzen Sie die Kombination entsprechend ihren Wünschen an.Bitte verwenden Sie für jedes HAWLE-COMBIFLEX ein eigenes Formular!
Bestellung Anfrage
Schieber mit Flansch: DN 150
DN 200
DN 250
DN 300*
DN 400*
Blinddeckel: anstelle Schieberoberteil
Endkappe mit ZAK 69:
Schieber mit Flansch: DN 150
DN 200
DN 250
DN 300*
DN 400*
Blinddeckel: anstelle Schieberoberteil
Endkappe mit ZAK 69:
Schieber mit Flansch: DN 150
DN 200
DN 250
DN 300*
DN 400*
Blinddeckel: anstelle Schieberoberteil
Endkappe mit ZAK 69:
Schieber mit Flansch: DN 150
DN 200
DN 250
DN 300*
DN 400*
Blinddeckel: anstelle Schieberoberteil
Endkappe mit ZAK 69:
Datum und Unterschrift Kunde
12 DN 25012 DN 250
DN 400*12 DN 400*
3 DN 2503 DN 250
DN 400*3 DN 400*
6 DN 2506 DN 250
DN 400*6 DN 400*
9 DN 2509 DN 250
DN 400*9 DN 400*
27.3.2018
* nur passend für Mittelteil DN 300!
10 | HAWLE
HAWLE-COMBIFLEXAccessories and spare parts
Hydrants, ventilation and air release valvesPerfect for vertical outlets:
No. 5060 No. 5151H4 No. 9836 No. 9837 No. 9842K
No. 8710E2 No. 8630E2 No. 8690E2 No. 8700E2 No. 2157 / No. 2158
No. 7800 No. 9920 No. 9000E2 No. 9500E2
Illustrations, technical data, dimensions (all dimensions in mm) and weights (all weights in kg) are subject to alteration without notice.
E2 valve accessories and spare parts
HAWLE | 11
Connection spacer ring with ZAK outlets
Flange
Other
No. 7994 No. 0400 No. 7602 No. 0801 No. NL41 No. NL42
No. 8591
No. 2810 No. 3162 No. 6465 No. 3721 No. 2811 No. 6160
Illustrations, technical data, dimensions (all dimensions in mm) and weights (all weights in kg) are subject to alteration without notice.
Service connections (ZAK system)
E. Hawle Armaturenwerke GmbH
Wagrainer Straße 13 A-4840 Vöcklabruck
Tel.: +43 (0)7672 - 72576-0 Fax.: +43 (0)7672 - 78464
E-Mail: [email protected] www.hawle.com
80 100 125 150 200 250 300 400
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
distributed by:
HAWLE COMBI VALVESProduct range
HAWLE COMBI VALVES
Model
HAWLE-COMBIFLEX
Combi-T, flange
Combi-T, System 2000
MMB valve, BAIO
Combi-III, flange, without vertical outlet
Combi-III, flange, with vertical outlet
Combi-III, BAIO, with vertical outlet
Combi-IV, without vertical outlet
Combi-IV, with vertical outlet
Prin
ted
on re
cycl
ed, c
hlor
ine-
free
blea
ched
pap
er a
nd a
ging
.
Art
.-N
o.: H
AW
-403
-EN
E
ditio
n 01
.201
9