AeroFlo2 60™

E XT E N S I O N

Step 1

Carefuly remove the existing Drain Assembly fromthe AeroFlo2 60 Reservoir and set it aside.

Step 2

Place the Extension Reservoir in-line withthe AeroFlo2 60 Reservoir and connect thetwo reservoirs with the Reservoir Coupler.Place the Siphoning Elbow on the ReservoirCoupler inside of the Extension Reservoir.

40 Gallon Reservoir6 Chambers w/Spray LinesManifold Assembly“Quick Stand” support strucureReservoir Coupler60 Netcups

60 CocoTek CupsSiphoning ElbowHydrotonFloraSeries Nutrients

AeroFlo2 60 Extension Parts List

P.O. Box 1576 • Sebastopol, CA 95473Phone (707) 824-9376 • Fax (707) 824-9377

www.generalhydroponics.com

© GENERAL HYDROPONICS 2002

Step 4

Remove the end cap fromthe AeroFlo2 60 manifoldassembly.

Step 5

Place the ExtensionChambers on theExtension Reservoir.

Step 6

Thread the ExtentionManifold onto the AeroFlo2

60 Manifold. As you turn the manifold besure that the individualmanifold connections arelined up with the Chamberinlets to facilitate connect-ing to the chambers.

Step 7

Attach the Manifold to theindividual ExtensionChambers. Insert theNetcups, CocoTek Cupsand Hydroton media in theExtention Chambers asdescribed in the AeroFlo2

60 instructions.

Step 3

Insert the Drain Assembly removed from theAeroFlo2 60 into the lower grommet on the otherend of the Extension Reservoir.

lower grommeton AF60

higher grommeton Extension

SiphoningElbow onReservoirCoupler