Upload
aaron-osorio
View
230
Download
6
Embed Size (px)
DESCRIPTION
General Hydroponics AeroFlo 60 extension instruction guide.
Citation preview
AeroFlo2 60™
E XT E N S I O N
Step 1
Carefuly remove the existing Drain Assembly fromthe AeroFlo2 60 Reservoir and set it aside.
Step 2
Place the Extension Reservoir in-line withthe AeroFlo2 60 Reservoir and connect thetwo reservoirs with the Reservoir Coupler.Place the Siphoning Elbow on the ReservoirCoupler inside of the Extension Reservoir.
40 Gallon Reservoir6 Chambers w/Spray LinesManifold Assembly“Quick Stand” support strucureReservoir Coupler60 Netcups
60 CocoTek CupsSiphoning ElbowHydrotonFloraSeries Nutrients
AeroFlo2 60 Extension Parts List
P.O. Box 1576 • Sebastopol, CA 95473Phone (707) 824-9376 • Fax (707) 824-9377
www.generalhydroponics.com
© GENERAL HYDROPONICS 2002
Step 4
Remove the end cap fromthe AeroFlo2 60 manifoldassembly.
Step 5
Place the ExtensionChambers on theExtension Reservoir.
Step 6
Thread the ExtentionManifold onto the AeroFlo2
60 Manifold. As you turn the manifold besure that the individualmanifold connections arelined up with the Chamberinlets to facilitate connect-ing to the chambers.
Step 7
Attach the Manifold to theindividual ExtensionChambers. Insert theNetcups, CocoTek Cupsand Hydroton media in theExtention Chambers asdescribed in the AeroFlo2
60 instructions.
Step 3
Insert the Drain Assembly removed from theAeroFlo2 60 into the lower grommet on the otherend of the Extension Reservoir.
lower grommeton AF60
higher grommeton Extension
SiphoningElbow onReservoirCoupler