8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 1/94
Externa l Cont rol Man ua l
< Sta ndar d Comma nd for XP m od e l >
Ver 1.0.2 27.Feb.2008
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 2/94
- 2 -
This manual shows the communication system and control commands between the plasma
monitors and the communications control equipments.
1 . Genera l in form a t i on
This protocol is user menu cont rol (fully cont rol) used t o RS-232C for plasm a monitor.
2 . C on t e n t s
1 . G e n e r a l i n fo r m a t i on ............................................................................................................... - 2 -
2 . C o n t e n t s ..................................................................................................................................- 2 -
3 . Connec t ions .............................................................................................................................- 4 -
1) Connector pin assignment ..............................................................................................- 4 -
2) Conn ector on t he extern al equipmen t side (PC) ...........................................................- 4 -
3) Wiring ...............................................................................................................................- 4 -
4) Hardware connection into the monitor .......................................................................... - 5 -
4 . C om m u n i ca t i on F o r m a t ......................................................................................................... - 6 -
1) Interface ...........................................................................................................................- 6 -
2) Control command diagram .............................................................................................- 7 -
(1) Hea der block forma t (fixed length) ......................................................................... - 8 -
(2) Message block format .............................................................................................- 10 -
<1> Get curr ent par ameter ...........................................................................................- 10 -
<3> Set Para meter ......................................................................................................... - 12 -
<5> Comm an d ................................................................................................................ - 13 -
<6> Comm an d reply ...................................................................................................... - 13 -
(3) Check code............................................................................................................... - 14 -
(4) Delimiter ................................................................................................................. - 15 -
3) Cont rol sequence............................................................................................................ - 15 -
5 . O p er a t i on C om m a n d s ........................................................................................................... - 16 -
1) Operation Comman ds ....................................................................................................- 16 -
(1) Power ON / Power OFF ...............................................................................................- 16 -
(2) Power sta tus read ........................................................................................................ - 18 -
(3) Inpu t Switch Chan ge ...................................................................................................- 20 -
(4) Inpu t Sour ce read ........................................................................................................ - 22 -
(5) Self-diagnosis st at us rea d ...........................................................................................- 24 -
(6) NU LL Message ............................................................................................................. - 26 -
(7) Pr oduct N am e Read .....................................................................................................- 27 -
(8) Serial Nu mber Read ....................................................................................................- 29 -
(9) Pr esent Time writ e ...................................................................................................... - 31 -
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 3/94
- 3 -
(10) Pr esent Time rea d ...................................................................................................... - 33 -
(11) Pr ogra m Timer wr ite .................................................................................................- 35 -
(12) Pr ogra m Timer r ead ..................................................................................................- 49 -
(13) Repeat Timer writ e ....................................................................................................- 57 -
(14) Repeat Timer rea d .....................................................................................................- 67 -
(15) FREQUENCY data reading ......................................................................................- 73 -
(16) Remocon Code Contr ol...............................................................................................- 75 -
2) Menu Opera tion Comma nds (VCP comman ds) ...........................................................- 77 -
(1) Operation code table ....................................................................................................- 77 -
(2) Typical pr ocedure exa mple (“Brightness” setting) ....................................................- 86 -
St ep 1. Get pa ra meter ................................................................................................... - 86 -
St ep 2. Get pa ra meter rep ly.......................................................................................... - 87 -
St ep 3. Set pa ra meter .................................................................................................... - 88 -
St ep 4. Set pa ra meter reply .......................................................................................... - 89 -
St ep 5. Confirma t ion ..................................................................................................... - 89 -
(3) Un supp orted OP code or P ar am eter ........................................................................... - 90 -
ex 1. un support ed OP code (Get Pa ra met er is “Black Level”)....................................- 90 -
ex 2. un supported Para meter (Set Par ameter is “128d (80h)”)..................................- 92 -
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 4/94
- 4 -
3. Conn ect ions
The following control sequence is used for a single and multiple monitors that are daisy-chained
together please use the standard command. When using the following control commands, all of
th e daisy-cha ined monitors can be contr olled at t he sa me time from one monitor. Reply an d st at us
comm an ds, however, will only perta in t o the pr imar y monitor, not seconda ry monit ors.
1) Connector pin assignment
Conn ector on th e plasm a m onitor side : E XTERNAL CONTROL connector.
Type of conn ector : D-Sub 9-pin m ale
Pin No. Nam e
1 NC
2 RXD (Receiving da ta )
3 TXD (Trans mit dat a)4 NC
5 GND
6 NC
7 RTS (Ready to send)
8 CTS (Clear to send)
9 NC
2) Conn ector on t he extern al equipmen t side (PC)
: Seria l port (RS-232C) connector.
See the specifications of the equipment that is to be connected for the type of connector and the
pin assignment.
3) Wiring
Use a crossed (reverse) cable.
Wire t he cable so th at each pair of dat a lines cross between th e two devices.
These data line pairs are RXD and TXD, and RTS and CTS.
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 5/94
- 5 -
4) Hardware connection into the monitor
Pleas e refer t o the following block diagra m.
TXD SW is n ormally “on” . When CPU sen d TXD dat a, SW is “off ” .
If th e “IR CONTROL” function is selected “SECANDARY” by the menu,
SW is fixed “off ”.
This system ha s 2 kind of CPU, one is a Sta nd-by CPU, another is Main CPU.
When Sta nd-by stat e, Stand-by CPU works, but , Main CPU is dead.
The Sta nd-by CPU changes the sett ing when changing power stat us from Stan d-by to ON.
1) th e 3.3V SW is ON 2) RS232C lines is cha nged from Sta nd-by CPU t o Main CPU
*note 1) The externa l equipment (ex. PC) should wait t o send next comm an d
at least 6 s econds after sending POWER ON comma nd.
*note 2) When St an d-by sta te, th e Sta nd -by CPU can r eceive only following comman ds.
1) POWER ON comman d
2) POWER Statu s read comman d
232C SEL
3.3V
Stand-by
CP U
RS-232C
OU T
RS-232C
IN
9
6
5
1
9
6
5
1
RS-232C
DRIVER
R1I
T1O
R2I
T2O
R1O
T1I
R2O
T2I
RXD1
TXD1
RXD2
TXD2
RXD
TXD
RXD
TXD
TXD SW
Rin
Tout
Rin1
Tout1
Rin2
Tout2
Main
CP U
RXD
TXD
RS-232C
SWITCH
3.3V SW
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 6/94
- 6 -
4 . C om m u n i ca t i on F or m a t
1) Interface
COMMUNICATION SYSTEM ASYNCH RONOUS
PROTOCOL RS-232C
BAUD RATE 9600 (bps)
DATA LEN GTH 8 (bits)
PARITY BIT NONE
STOP BIT 1 (bit)
FLOW CONTROL NONE
COMMUNICATION CODE ASCII
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 7/94
- 7 -
2) Control command diagram
The comma nd is st ru ctu red by th e Header, Message, Check code an d Delimiter. The length of th e
comm an d is d ifferent for each fun ction.
Hea der Message Check code Delimiter
The comm and packet consists of four pa rt s, Hea der, Message, Check code an d Delimiter.
Sequ ence of a t ypical procedu re t o contr ol a m onitor is a s follows,
[A controller and a monitor, two-way communication composition figure]
Monitorontroller
HeaderMessageCheck CodeDelimiter
Header Message Check Code Delimiter
HeaderMessageCheck CodeDelimiter
Header Message Check Code Delimiter
HeaderMessageCheck CodeDelimiter
Header Message Check Code Delimiter
HeaderMessageCheck CodeDelimiter
The controller sends command to get a
value from the monitor that you want to
change.
The monitor replies a curren t value of the
requested item.
The cont roller sends comman ds to set an
adjusted value.
The m onitor replies to th e cont roller for
confirmation.
The controller sends command to get a
value for confirma tion.
The monitor replies an adjusted value.
The controller requests to store the
adjusted value to the monitor.
Get Parameter
Get Para meter Reply
Set Parameter
Get Parameter
Get Para meter Reply
Set Para meter Reply
Save Current Setting Command
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 8/94
- 8 -
(1) Hea der block forma t (fixed length)
1st byte) SOH: Star t of Header
ASCII SOH (01h)
2ndbyte) Reserved: Reserved for futu re ext ensions.
ASCII '0'(30h)
3rdbyte) Destin at ion: Destina tion equipmen t I D. (Receiver)
Specify a comm an ds r eceiver ’s address.
This value must m atch the ”Monitor ID No.” set in th e OSM.
“Monit or ID” to “Destination Address” conver sion ta ble is as follows,
Monit or ID Destina tion
Address (ASCII)
Monit or ID Destina tion
Address (ASCII)
1 ‘A’(41h) 14 ‘N ’(4Eh)
2 ‘B ’(42h) 15 ‘O’(4Fh)
3 ‘C ’(43h) 16 ‘P ’(50h)
4 ‘D’(44h) 17 ‘Q’(51h)
5 ‘E ’(45h) 18 ‘R’(52h)
6 ‘F ’(46h) 19 ‘S ’(53h)
7 ‘G’(47h) 20 ‘T’(54h)
8 ‘H ’(48h) 21 ‘U ’(55h)
9 ‘I ’(49h) 22 ‘V’(56h)
10 ‘J ’(4Ah) 23 ‘W’(57h)
11 ‘K’(4Bh) 24 ‘X’(58h)
12 ‘L’(4Ch) 25 ‘Y’(59h)
13 ‘M’(4Dh) 26 ‘Z’(5Ah)
ALL ‘*’(2Ah)
Ex.) If you want to control a monitor that has the "ID No." as '1', specify a destination address
'A'(41h). If you want to control all of the monitors which are connected by a daisy chain, specify a
destinat ion addr ess” ‘*’(2Ah).
4 t hbyte) Sour ce: Sour ce equipmen t ID. (Sender )
Specify a sender a ddress .
The cont roller mu st be ‘0’(30h).
Hea der Messa ge Check code Delimiter
SOH Reserved '0' Destina tion Source Message Type Message Length
1st 2nd 3rd 4 th 5 th 6 th -7 th
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 9/94
- 9 -
5 t hbyte) Messa ge Type: (Case sensitive.)
Refer to section 4.2 “Messa ge block forma t” for more det ails.
ASCII 'A' (41h): Comm an d
ASCII 'B' (42h): Comm an d r eply.
ASCII 'C' (43h): Get curr ent par am eter from a m onit or.
ASCII 'D' (44h): "Get p ar am eter " rep ly.
ASCII 'E' (45h): Set p ar am eter.
ASCII 'F' (46h): "Set p ar am eter " rep ly.
6 t h -7th bytes) Message Length :
Specify th e length of th e messa ge (th at follows th e hea der) from STX to ETX.
This length includes STX an d ETX.
The byte dat a m ust be encoded to ASCII cha ra cters.
Ex.) The byte d at a 3Ah mu st be encoded t o ASCII chara cters '3' and 'A' (33h a nd 41h).
The byte da ta 0Bh mu st be en coded to ASCII cha ra cters '0' and 'B' (30h a nd 42h ).
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 10/94
- 10 -
(2) Message block format
“Message block format” is allied to th e “Message Type” in th e “Header”.
Refer t o the s ection 6 “Message forma t” for m ore detail.
<1> Get cur rent pa ram eter
The cont roller sends t his message when you want to get th e sta tus of the monitor.
For th e stat us t ha t you wan t t o get, specify the “OP code pa ge” and “OP code”,
refer t o “Table 5)-1 Operat ion code ta ble”.
“Message form at ” of th e “Get cur rent parameter” is a s follows,
1st byte) STX: Star t of Message
ASCII STX (02h)
2nd - 3rd byt es) OP code pa ge: Opera tion code pa ge.
Specify th e “OP code pa ge” for t he cont rol which you want to get th e sta tus.
Refer t o “Table 5)-1 Opera tion code tab le” for each item .
OP code page dat a m ust be encoded to ASCII cha ra cter s.
Ex.) The byte da ta 02h mu st be en coded to ASCII cha ra cter s '0' and '2' (30h a nd 32h ).
OP code pa ge 02h -> OP code pa ge (Hi) = ASCII '0' (30h)
OP code p age (Lo) = ASCII '2' (32h)
4 t h - 5 t h bytes ) OP code: Oper at ion code
OP code dat a m us t be encoded t o ASCII chara cters .
Ex.) The byte da ta 1Fh m us t be encoded to ASCII cha ra cter s '1' and 'F' (31h a nd 46h ).
OP code 1Fh -> OP code (Hi) = ASCII '1' (31h)
OP code (Lo) = ASCII 'F ' (46h)
6 t h byte) ETX: En d of Messa ge
ASCII ETX (03h)
Hea der Message Check code Delimiter
OP code pa ge OP codeSTXHi Lo Hi Lo
ETX
1st 2nd-3rd 4 th -5t h 6 t h
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 11/94
- 11 -
<2> Get Par ameter r eply
The monit or will reply with th e sta tu s of th e request ed item sp ecified by the cont roller
in the “Get par ameter message”.
“Message form at ” of th e “Get paramet er reply” is a s follows,
1st byte) STX: Start of Message
ASCII STX (02h)
2nd - 3 rd bytes) Result code.
These bytes indicate a resu lt of th e request ed comma nds as follows,
00h: No Er ror.
01h: Unsupported operat ion with t his monitor or unsu pported operation un der
current condition.
This r esult code from t he m onitor is encoded t o ASCII char acters.
Ex.) The byte da ta 01h is en coded t o ASCII char acter '0' and '1' (30h a nd 31h).
4 t h - 5 t h bytes ) OP code page: Opera tion code pa ge.
These bytes in dicat e a r eplying item's OP code page.
This ret ur ned value from the monit or is encoded to ASCII chara cter s.
Ex.) The byte da ta 02h is en coded t o ASCII char acter '0' and '2' (30h a nd 32h)
Refer t o the operat ion codes t able.
6 t h - 7 t h bytes ) OP code: Oper at ion code
These bytes in dicat e a r eplying item's OP code.
This ret ur ned value from the monit or is encoded to ASCII chara cter s.
Refer t o the opera tion code t able.
Ex.) The byte da ta 1Fh is encoded to ASCII cha ra cter '1' an d 'F' (31h a nd 46h ).
8 t h -9th bytes) Type: Operation type code
This ret ur ned value from the monit or is encoded to ASCII chara cter s.
Ex.) The byte da ta 01h is en coded t o ASCII char acter '0' and '1' (30h a nd 31h).
00h: Set para meter
01h: Momenta ryLike the AutoSetup fun ction which aut omat ically chan ges t he para meter.
10 th - 13t h bytes) Max. value: Maximum value wh ich monitor can accept. (16bits)
This ret ur ned value from the monit or is encoded to ASCII chara cter s.
Ex.) '0','1','2' an d '3' mean s 0123h (291)
14 th - 17t h bytes) Curr ent Value: (16bits)
This ret ur ned value from the monit or is encoded to ASCII chara cter s.
Ex.) '0','1','2' an d '3' mean s 0123h (291)
18 th byte) ETX: End of Messa ge
ASCII ETX (03h)
Result OP code page OP code Type Max value Cur ren t ValueSTX
Hi Lo Hi Lo Hi Lo Hi Lo MSB LSB MSB LSB
ETX
1st 2nd – 3rd 4 t h-5t h 6 th -7t h 8 t h-9t h 10 t h-13 t h 14 t h-17 th 18 t h
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 12/94
- 12 -
<3> Set Par ameter
The cont roller send s th is messa ge to cha nge a set tin g of th e monitor.
Message form at of th e “Set parameter” is a s follows,
1st byte) STX: Start of Message
ASCII STX (02h)
2nd - 3 rd bytes ) OP code pa ge: Oper at ion code page
This OP code page dat a mu st be encoded to ASCII cha ra cters.
Ex) The byte dat a 02h mu st be encoded to ASCII '0' and '2' (30h a nd 32h ).
Refer t o the Opera tion code ta ble.
4 t h - 5 t h bytes ) OP code: Oper at ion code
This OP code dat a m ust be encoded to ASCII cha ra cter s.
OP code 1Fh -> OP code (Hi) = ASCII '1' (31h)
OP code (Lo) = ASCII 'F' (46h )
Refer t o the Opera tion code ta ble.
6 t h - 9 t h bytes) Set va lue: (16bit)
This dat a must be encoded to ASCII char acters.
Ex.) 0123h -> 1st(MSB) = ASCII '0' (30h)
2nd = ASCII '1' (31h)
3rd = ASCII '2' (32h)
4th(LSB) = ASCII '3' (33h)
10 th byte) ETX: End of Messa ge
ASCII ETX (03h)
OP code pa ge OP code Set Valu eSTX
Hi Lo Hi Lo MSB LSB
ETX
1st 2nd-3rd 4 t h-5th 6 t h-9t h 10 t h
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 13/94
- 13 -
<4> Set Par ameter r eply
The monit or replies with th is message for a confirmat ion of th e “Set parameter message”.
Message form at of th e “Set param eter reply” is a s follows,
1st byte) STX: Start of Message
ASCII STX (02h)
2nd - 3 r d bytes) Result code
ASCII '0''0' (30h , 30h): No Er ror
ASCII '0''1' (30h, 31h): Uns upp orted operat ion with th is monitor or uns upport ed operation
under cur rent condition.
4t h
- 5t h
bytes) OP code page: Echoes back the Operation code page for confirmation.Reply dat a from th e monitor is encoded to ASCII cha ra cters.
Ex.) OP code page 02h -> OP code pa ge = ASCII '0' an d '2' (30h a nd 32h)
Refer t o Operat ion code table.
6 t h - 7 t h bytes) OP code: Echoes back the Operation code for confirmation.
Reply dat a from th e monitor is encoded to ASCII cha ra cters.
Ex.) OP code 1Fh -> OP code (Hi) = ASCII '1' (31h)
OP code (Lo) = ASCII 'F' (46h )
Refer t o Operat ion code table
8 t h - 9 t h bytes) Type: Operation type code
ASCII '0''0' (30h, 30h ): Set pa ra met er
ASCII '0''1' (30h , 31h): Momen ta ry
Like Auto Setup fun ction, th at au tomatically chan ges t he pa ram eter.
10 th - 13t h bytes) Max. value: Maximum value th at monitor can a ccept. (16bits)
Reply dat a from th e monitor is encoded to ASCII cha ra cters.
Ex.) '0''1''2''3' mean s 0123h (291)
14 th - 17t h bytes) Request ed sett ing Value: Echoes back t he pa ra met er for confirma tion. (16bits)
Reply dat a from th e monitor is encoded to ASCII cha ra cters.
Ex.) '0''1''2''3' mean s 0123h (291)
18 th byte) ETX: En d of Messa ge
ASCII ETX (03h)
<5> Comman d
“Comman d message” forma t depends on each comm an d.
Usu ally, th is “comman d message” is used for s ome non-slider cont rols and some special operat ions,
such as “Save curr ent sett ings”, “Get t iming report ”, “power control”, “Schedule”, etc.
<6> Comman d reply
The m onitor replies to a qu ery from t he cont roller.“Comman d r eply message” form at depends on each comman d.
Result OP code page OP code Type Max value Requested sett ing ValueSTX
Hi Lo Hi Lo Hi Lo Hi Lo MSB LSB MSB LSB
ETX
1st 2nd-3rd 4 t h-5t h 6 t h-7th 8t h-9t h 10 t h-13 t h 14 t h-17 th 18 t h
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 14/94
- 14 -
. (3) Check code
Check code is t he Block Ch eck Code (BCC) between t he H eader an d t he E nd of Message except
SOH.
Dn+1 = D 1 XOR D2 XOR D3 XOR ,,, Dn
XOR: Exclusive OR
Following is a n exa mple of a Check code (BCC) calcula tion.
Check code (BCC) D17 = D1 xor D2 xor D3 xor … xor D14 xor D15 xor D16
= 30h xor 41h xor 30h xor 45h xor 30h xor 41h
xor 02h xor 30h xor 30h xor 31h xor 30h xor 30h
xor 30h xor 36h xor 34h xor 03h
= 77h
Hea der Message Check code Delimiter
27 26 25 24 23 22 21 20
SOH D0
Reserved D1
Destination D2
Source D3
Type D4
Length D5
STX D6
Data D7
| |
| |
ETX Dn
Check code Dn+1 P P P P P P P P
Header Message
SOH ReservedDestination
Address
Source
Address
Message
typeMessage length STX
OP code
pageOP code Set Value ETX
Check
code
(BCC)
Delimiter
01 30 41 30 45 30 41 02 30 30 31 30 30 30 36 34 03 77 0D
D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 D16 D17 D18
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 15/94
- 15 -
(4) Delimiter
Pa cket d elimiter code;
ASCII CR(0Dh).
3) Cont rol sequence
(1) The comm an d from a pers onal comput er to th e plasma monitor will ta ke 600msec.
(2) The plasm a monit or will send a ret ur n comm an d 600msec(*) after it h as r eceived an encode. If
th e comma nd isn ’t r eceived correctly, the plasm a monitor will not send t he ret ur n comm an d.
(3) The personal computer checks the command and confirms if the command which has been
sent has been execut ed or n ot.
(4) This plasma monitor sends various codes other than the code. When sending a control
sequence via RS-232C, other codes from per sonal compu ter s will be ignored.
* : The sending time of the return command may be delayed depending on the monitor ’s
cur rent activity (cha nging of th e inpu t signa l, etc.).
Hea der Message Check code Delimiter
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 16/94
- 16 -
5 . O p e r a t i on C om m a n d s
1) Operation Comman ds
The operat ion comma nds execut e the ba sic opera tion sett ing of th is plasma monitor.
It m ay not operate when chan ging th e signal :
(1) Power ON / Power OF F
<from P C to monit or>
The cont roller r equests th e monitor t o cont rol monitor power.
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser vedMonitor ID: Specify the Monitor ID wh ich you wan t to chan ge a set t ing.
E x.) If Mon itor I D is '1', specify 'A' (41h ).If Monit or ID is 'ALL ', specify '*' (2Ah).
'0 ' (30h): Message sender is the controller'A' (41h) : Message type is "Comm an d"
'0 '- 'C' (30h , 43h): Messa ge lengt h is 12 byt es
Mes s ageSTX (02h) : S tar t of Message'C'-'2 ’, '0 ' -'3 '- 'D'-'6 ' (43h , 32h, 3 0h, 33h , 44h, 36 h): power cont rol com ma nd'0'- '0'- '0'- '1' (30h, 30h, 30h, 31h): Power mode
0001: ON0004: OFF (sam e as th e power off by IR)
ET X (03h): E nd of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): End of packet .
Header Mes s ageCheckcode
Delimiter
SOH -'0'-Mon itor ID-'0'- 'A'-'0'-'C' STX-'C'-'2'-'0'-'3'-'D'-'6'-
'0'-'0'-'0'-'1'-ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 17/94
- 17 -
<from monit or t o PC : ACK>
The monitor r eplies a da ta for confirma tion.
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Indicat e a r eplying Monitor ID.
Ex.) Whe n t his byt e is set to 'A' (41h ), th e rep lying Monitor ID is '1 ' .
Wh en t his byt e is set to '*' (2Ah), th e rep lying Monitor ID is 'ALL'.'B ' (42h): Message type is "Comm an d r eply"'0 '- 'E' (30h, 45h): Messa ge lengt h is 14 bytes
Mes s age
STX (02h) : S tar t of Message'0'- '0' (30h, 30h): Result code.
00 : No error01 : Uns uppor ted
'C'-'2 ’, '0 ' -'3 '- 'D'-'6 ' (43h , 32h, 30h , 33h, 44h , 36h): power cont rol rep ly comm an d The m onitor repl ies same a s power control comm an d to the control ler .
'0'- '0'- '0'- '1' (30h, 30h, 30h, 31h): Power mode0001: ON0004: OFF (same a s th e power off by IR)
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “ Check code” for a BCC calculat ion.
DelimiterCR (0Dh): En d of pa cket.
POWER ON command sh ould not be used less tha n 6 seconds after t he power is tu rn ed off.
POWER OFF comma nd sh ould not be used less th an 6 second s after the power is tu rn ed on.
Header Mes s age
Check
code DelimiterSOH-'0'- '0'-Monitor ID-'B'-'0'- 'E' STX-'0'-'0'-'C'-'2'-'0'-'3'-'D'-'6'-
'0'-'0'-'0'-'1'-ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 18/94
- 18 -
(2) Power st atu s read
<from P C to monit or>
The cont roller requests t he monitor to reply a curr ent power stat us.
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved
Monitor ID: Specify the Monitor ID wh ich you wan t to chan ge a set t ing.E x.) If Mon itor I D is '1', specify 'A' (41h ).
If Monit or ID is 'ALL ', specify '*' (2Ah).'0 ' (30h): Message sender is the controller'A' (41h) : Message type is "Comm an d"'0 '- '6 ' (30h , 36h): Mess age len gth is 6 bytes
Mes s ageSTX (02h) : S tar t of Message'0 '- '1 ' -'D'-'6 ' (30h, 31h, 44h , 36h) : Get p ower st at us comm an dET X (03h): E nd of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3)“
Check code”
for a BCC calculat ion.
DelimiterCR (0Dh): End of packet .
Header Mes s age Checkcode
Delimiter
SOH -'0'-Mon itor ID-'0'- 'A'-'0'-'6' STX-'0'-'1'-'D'-'6'-ETX BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 19/94
- 19 -
<from monit or t o PC : ACK>
The monitor return s with t he curr ent power statu s.
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Indicat e a r eplying Monitor ID.
Ex.) Whe n t his byt e is set to 'A' (41h ), th e rep lying Monitor ID is '1 ' .
Wh en t his byt e is set to '*' (2Ah), th e rep lying Monitor ID is 'ALL'.'B ' (42h): Message type is "Comm an d r eply"'1 '- '2 ' (31h , 32h): Messa ge lengt h is 18 byt es
Mes s age
STX (02h) : S tar t of Message'0 '- '2 ' (30h , 32h): Reser ved da ta .'0'- '0' (30h, 30h): Result code.
00 : No error01 : Uns uppor ted
'D'- '6 ' (44h , 36h) : Display p ower m ode code
'0' -'0 ' (30h, 30h) : Par am eter type code is "Set par am eter "'0 '- '0 ' -'0 ' -'4 ' (30h, 30h, 30h , 34h) : ma x valu e is 4(0004h) <P ower m ode is 3 typ es>'0'- '0 ' -'0 '- '1 ' (30h, 30h, 30h, 31h ): Cu rr en t power mode
< S t a t u s >0001: ON0002: power m a nagem en t m ode0004: OFF (sam e as the power off by IR)
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “ Check code” for a BCC calculat ion.
Delimiter
CR (0Dh): En d of pa cket.
Header Mes s age
Check
code DelimiterSOH -'0'-'0'-Mon itor ID-'B'-'1'- '2' STX-'0'-'2'-'0'-'0'-'D'-'6'-'0'-'0'-
'0'-'0'-'0'-'4'-'0'-'0'-'0'-'1'-ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 20/94
- 20 -
(3) Inpu t Switch Chan ge
<from P C to monit or>
The cont roller r equests t he m onitor to cha nge inpu t ( ex. Cha nge to VGA)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser vedMonitor ID: Specify the Monitor ID wh ich you wan t to chan ge a set t ing.
E x.) If Mon itor I D is '1', specify 'A' (41h ).
If Monit or ID is 'ALL ', specify '*' (2Ah).'0 ' (30h): Message sender is the controller'E ' (45h) : Message type is "Set par am eter"'0 '- 'A' (30h, 41h ): Messa ge lengt h is 10 bytes
Mes s ageSTX (02h) : S tar t of Message'0'-'0 ’, '6 ' -'0 ' (30h, 30h, 36h , 30h): OP code p age & O P code : INP UT'0'- '0 ' -'0 ' -'1 ' (30h , 30h, 30h , 31h): Pa ra me ter
0001: VGA (SCART3)0002: RGB/HV
0003: DVI0005: VIDE O1
0006: VIDE O20007: S-VIDEO000C: DVD/HD1000D: DVD/HD2 (SCART1/SCART2)
ET X (03h): E nd of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “ Check code” for a BCC calculat ion.
DelimiterCR (0Dh): End of packet .
Header Mes s age Checkcode
Delimiter
SOH -'0'-Mon itor ID-'0'- 'E '- '0'- 'A' STX-'0'-'0'-'6'-'0'-
'0'-'0'-'0'-'1'-ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 21/94
- 21 -
< from mon itor t o PC : ACK >
The m onitor replies a dat a for confirma tion ( ex. Cha nge t o VGA)
H e a d e rSOH (01h): S ta r t Of Header
'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Indicat e a r eplying Monitor ID.
Ex.) When th is byte is set to 'A' (41h) , the r eplying Monitor ID is '1 '.Wh en t his byt e is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.
'F ' (46h): Message type is "Set pa ram eter r eply"'1 '- '2 ' (31h , 32h): Messa ge lengt h is 18 byt es
Mes s ageSTX (02h) : S tar t of Message'0'- '0' (30h, 30h): Result code.
00 : No error01 : Uns uppor ted
'0'-'0 ’, '6 ' -'0 ' (30h, 30h, 36h , 30h): OP code p age & O P code : INP UT'0'-'0 ’ (30h, 30h) : TYPE : Set par am eter'0'- '0'- '2'- '0' (30h, 30h, 32h, 30h): Max. value'0 '- '0 ' -'0 '- '1 ' (30h , 30h, 30h , 31h): Requ est set tin g valu e
0001: VGA (SCART3)0002: RGB/HV0003: DVI0005: VIDE O10006: VIDE O20007: S-VIDEO000C: DVD/HD1000D: DVD/HD2 (SCART1/SCART2)
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “ Check code” for a BCC calculat ion.
Delimiter
CR (0Dh): En d of pa cket.
Header Mes s age
Check
code DelimiterSOH-'0'- '0'-Monitor ID-'F'- '1'- '2' ST X-'0'-'0'-'0'-'0'-'6'-'0'-'0'-'0'-'0'-'0'-'2'-'0'-
'0'-'0'-'0'-'1'-ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 22/94
- 22 -
(4) Input Source read
<from P C to monit or>
The cont roller requests t he m onitor to reply a current input sour ce.
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser vedMonitor ID: Specify the Monitor ID wh ich you wan t to chan ge a set t ing.
E x.) If Mon itor I D is '1', specify 'A' (41h ).If Monit or ID is 'ALL ', specify '*' (2Ah).
'0 ' (30h): Message sender is the controller'C ' (43h): Message is "Get pa ra met er comm an d"
'0 '- '6 ' (30h , 36h): Mess age len gth is 6 bytes
Mes s ageSTX (02h) : S tar t of Message'0 '- '0 ' (30h , 30h): Oper at ion code page n um ber is 0'6 '- '0 ' (36h , 30h): Oper at ion code is 60h (in t he OP code pa ge 0)ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
Header Mes s ageCheck
code
Delimiter
SOH -'0'-Mon itor ID-'0'- 'C'-'0'-'6' STX-'0'-'0'-'6'-'0'-ETX BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 23/94
- 23 -
< from mon itor t o PC : ACK >
The monitor r etur ns with th e curr ent power stat us. ( ex. VGA)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Indicat e a r eplying Monitor ID.
Ex.) When th is byte is set to 'A' (41h) , the r eplying Monitor ID is '1 '.Wh en t his byt e is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.
'D ' (44h): Message Type is "Get par am eter reply"'1 '- '2 ' (31h , 32h): Mess age len gth is 18 bytes
Mes s ageSTX (02h) : S tar t of Message'0'- '0' (30h, 30h): Result code.
00 : No error01 : Uns uppor ted
'0 '- '0 ' (30h , 30h): Oper at ion code page n um ber is 0'6 '- '0 ' (36h , 30h): Oper at ion code is 60h (in t he p age 0)'0' -'0 ' (30h, 30h) : This opera t ion is "Set pa ra met er" type'0 '- '0 ' -'2 ' -'0 ' (30h, 30h, 32h , 30h): Inpu t sou rce m ax va lue is 32 (0020h)'0 '- '0 ' -'0 '- '1 ' (30h, 30h, 30 h, 31 h): Inp ut sour ce is VGA-0001(0001h )
0001: VGA (SCART3)0002: RGB/HV0003: DVI0005: VIDE O10006: VIDE O20007: S-VIDEO000C: DVD/HD1000D: DVD/HD2 (SCART1/SCART2)
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “ Check code” for a BCC calculat ion.
DelimiterCR (0Dh): En d of pa cket.
Header Mes s age
Check
code DelimiterSO H -'0'-'0'-Moni tor ID -'D'-'1'-'2' ST X-'0'-'0'-'0'-'0'-'6'-'0'-'0'-'0'
-'0'-'0'-'2'-'0'-'0'-'0'-'0'-'1'-ETXBCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 24/94
- 24 -
(5) Self-diagnosis st at us rea d
<from P C to monit or>
The cont roller request s th e monitor to read Self-diagnosis sta tu s.
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved
Monitor ID: Specify the Monitor ID wh ich you wan t to chan ge a set t ing.E x.) If Mon itor I D is '1', specify 'A' (41h ).
If Monit or ID is 'ALL', specify '*' (2Ah).'0 ' (30h): Message sender is the controller'A' (41h) : Message type is "Comm an d"'0 '- '4 ' (30h , 34h): Mess age len gth is 4 bytes
Mes s ageSTX (02h) : S tar t of Message'B'- '1 ' (42h, 31h ): Self-dia gnosis comm an dETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3)“
Check code”
for a BCC calculat ion.
DelimiterCR (0Dh): End of packet .
Header Mes s age Checkcode
Delimiter
SOH -'0'-Mon itor ID-'0'- 'A'-'0'-'4' STX-'B'-'1'-ETX BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 25/94
- 25 -
< from mon itor t o PC : ACK >
The m onitor replies a r esult of the self-diagnosis.
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Indicat e a r eplying Monitor ID.
Ex.) When th is byte is set to 'A' (41h) , the r eplying Monitor ID is '1 '.Wh en t his byt e is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.
'B ' (46h): Message type is "Comm an d r eply"N-N : Message length
Note .) The m a x im u m da t a l eng th th a t can be wr i t t en to the m on i tor a t a t im e i s 32 bytes .Ex.) The byte da ta 02h is encoded as ASCII cha ra cter s '0' an d '2' (30h a nd 32h )
Mes s ageSTX (02h) : S tar t of Message
'A'-'1 ' (41h, 31h): Application Tes t Repor t rep ly comm an dST : Resu lt of self-tests
00 : Norm a l77: DC volta ge abnorm ali ty80: Cooling fan a bnorm ali ty
Note .) Tem pera t u re l im i t and Tem pera tu r e s ens or e r ro r a r e no da ta .(m on i tor does no t s end th es e da ta )
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “ Check code” for a BCC calculat ion.
DelimiterCR (0Dh): En d of pa cket.
Header Mes s ageCheck
codeDelimiter
SOH-'0'- '0'-Monitor ID-'B'-N-N STX-'A'-'1'-ST(0)-ST(1) -------ST(n)-ETX BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 26/94
- 26 -
(6) NU LL Message
The NU LL messa ge retu rne d from th e monitor is used in the fol lowing cases ;
A timeout error h as occurred. (The defau lt t imeout is 10sec.)
The monitor receives an u nsu pported m essage type (comma nd).
Especial ly , when m essage type of He ader is "Comm an d" ( 'A ' (41h)) ,m on i tor r e tu rns N ULL Mes s age to PC.
The m onitor det ects a packet BCC (Block Check Code) error.
To tell the controller that the monitor does not have any answer to give to the host (not
rea dy or n ot expected)
< from m onitor to PC : NU LL Message>
H e a d e r
SOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Indicat e a r eplying Monitor ID.
Ex.) When th is byte is set to 'A' (41h) , the r eplying Monitor ID is '1 '.Wh en t his byt e is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.
'B ' (42h): Message type is "Comm an d r eply"
'0 '- '4 ' (30h , 34h): Messa ge lengt h is 4 byt es
Mes s ageSTX (02h) : S tar t of Message'B'- 'E' (42h, 45h) : NULL Messa geETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “ Check code” for a BCC calculat ion.
DelimiterCR (0Dh): En d of pa cket.
Header Mes s age
Check
code DelimiterSOH -'0'-'0'-Mon itor ID-'B'-'0'- '4' STX-'B'-'E'-ETX BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 27/94
- 27 -
(7) Product Na me Read
<from P C to monit or>
The con t ro l le r r eques t the m on i tor t o r ead th e p roduc t nam e.(Com m a nd)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser vedMonitor ID: Specify the Monitor ID of which you wan t to chan ge a set t ing.
E x.) If Mon itor I D is '1', specify 'A'.If Monit or ID is 'ALL ', specify '*' (2Ah).
'0 ' (30h): Message sender is the controller'A' (41h ): Messa ge Type is "Comm an d"
'0 '- '6 ' (30h , 36h): Mess age len gth is 6 bytes
Mes s ageSTX (02h) : S tar t of Message'C'- '2 ' -'1 '- '7 ' (43h, 32h , 31h, 37h): pr oduct n am e rea d comm an d
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
Header Mes s age Checkcode Delimiter
SOH -'0'-Mon itor ID-'0'- 'A'-'0'-'6' STX-'C'-'2'-'1'-'7'-E TX BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 28/94
- 28 -
<from monit or t o PC : ACK>
The m onitor repl ies with a m essage for conf irma tion. . (Comm an d reply)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Ind icat e a r eplying Monitor ID.
Ex. ) When t h is byte is set t o 'A ', the replying Monitor ID is '1' .Whe n t his byte is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.
'B ' (42h): Message Type is "Comm an d rep ly"'0 '- 'D' (30h , 44h): Messa ge lengt h is 13 byt es
Mes s ageSTX (02h) : S tar t of Message'C'- '3 ' -'1 '- '7 ' (43h, 33h , 31h, 37h): pr oduct n am e rea d rep ly comm an dData(0)-Data(1)-Data(3) -------Data(6) : product name
P42XP10 : (50h, 34h, 32h, 58h, 50h, 31h, 30h)
P50XP10 : (50h, 35h, 30h, 58h, 50h, 31h, 30h)
P60XP10 : (50h, 36h, 30h, 58h, 50h, 31h, 30h)
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
Delimiter
CR (0Dh): En d of packet
Header Mes s ageCheck
codeDelimiter
SOH -'0'-'0'- Mon itor ID -'B'-'0'- 'D' STX-'C'-'3'- '1'- '7'-Dat a (0)-Da ta (1)-Da ta (3) -------Da ta (6)-ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 29/94
- 29 -
(8) Serial Num ber Read
<from P C to monit or>
The con t ro l le r r eques t the m on i tor t o r ead th e s e r ia l num ber .(Com m and)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser vedMonitor ID: Specify the Monitor ID of which you wan t to chan ge a set t ing.
E x.) If Mon itor I D is '1', specify 'A'.If Monit or ID is 'ALL ', specify '*' (2Ah).
'0 ' (30h): Message sender is the controller'A' (41h ): Messa ge Type is "Comm an d"
'0 '- '6 ' (30h , 36h): Mess age len gth is 6 bytes
Mes s ageSTX (02h) : S tar t of Message'C'- '2 ' -'1 '- '6 ' (43h, 32h , 31h, 36h): ser ial nu m ber r ea d com ma nd
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
Header Mes s age Checkcode Delimiter
SOH -'0'-Mon itor ID-'0'- 'A'-'0'-'6' STX-'C'-'2'-'1'-'6'-E TX BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 30/94
- 30 -
<from monit or t o PC : ACK>
The m onitor repl ies with a m essage for conf irma tion. . (Comm an d reply)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Ind icat e a r eplying Monitor ID.
Ex. ) When t h is byte is set t o 'A ', the replying Monitor ID is '1' .Whe n t his byte is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.
'B ' (42h): Message Type is "Comm an d rep ly"'1 '- '0 ' (31h , 36h): Mess age len gth is 16 bytes
Mes s ageSTX (02h) : S tar t of Message'C'- '3 ' -'1 '- '6 ' (43h, 33h , 31h, 36h): ser ial nu m ber r ea d rep ly comm an dDat a(0)-Data(1)-Dat a(3) - --- ---Data (9) : ser ia l n um ber by u s ing ASCII char acter s t r ings
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
Header Mes s ageCheck
codeDelimiter
SOH -'0'-'0'- Mon itor ID -'B'-'1'- '0' STX-'C'-'3'- '1'- '6'-Dat a (0)-Da ta (1)-Da ta (3) -------Da ta (9)-ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 31/94
- 31 -
(9) Present Time write
<from P C to monit or>
The con t ro l le r r eques t the m on i tor t o wr it e th e P res en t T im e .(Com m a nd)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser vedMonitor ID: Specify the Monitor ID of which you wan t to chan ge a set t ing.
E x.) If Mon itor I D is '1', specify 'A'.If Monit or ID is 'ALL ', specify '*' (2Ah).
'0 ' (30h): Message sender is the controller'A' (41h ): Messa ge Type is "Comm an d"
'0 '- 'E' (30h, 45h): Messa ge lengt h is 14 bytes
Mes s ageSTX (02h) : S tar t of Message'C'- '2 ' -'1 '- '2 ' (43h, 32h , 31h, 32h) : Prese nt tim e wr ite comm an d'WW'-'HH '-'MN'- 'DS' : Pr esen t t ime
WW : weekda ys'0 '- '0 ' (30h , 30h) : Sun da y'0 '- '1 ' (30h, 31h ) : Monda y'0'- '2 ' (30h, 32h ) : Tuesd ay'0 '- '3 ' (30h , 33h) : Wedn esda y
'0 '- '4 ' (30h , 34h) : Thu rsd ay'0 '- '5 ' (30h, 35h ) : Frida y'0 '- '6 ' (30h , 36h) : Sa tu rd ay
H H : H ou r s'0'-'0' (30h, 30 h) : 0
|'1'-'7' (31h , 37h ) : 23 (=17h )
MN : Minu tes'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)
DS : Dayl ight Saving (Sum mer Tim e)'0'-'0' (30h , 30h ) : OF F
'0'-'1' (30h , 31h ) : ON
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
Header Mes s age Checkcode Delimiter
SOH -'0'-Mon itor ID-'0'- 'A'-'0'-'E' STX-'C'-'2'-'1'-'2'-WW-H H -MN-DS -ET X BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 32/94
- 32 -
<from monit or t o PC : ACK>
The m onitor repl ies with a da ta for confirma tion. . (Comm an d reply)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Ind icat e a r eplying Monitor ID.
Ex. ) When t h is byte is set t o 'A ', the replying Monitor ID is '1' .Whe n t his byte is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.
'B ' (42h): Message Type is "Comm an d rep ly"'1 '- '0 ' (31h , 30h): Mess age len gth is 16 bytes
Mes s ageSTX (02h) : S tar t of Message'C'- '3 ' -'1 '- '2 ' (43h, 33h , 31h, 32h): P rese nt tim e writ e reply com m an dST : P res en t T im e S ta tus com m and
'0'- '0' (30h, 30h) : No error'0 '- '1 ' (30h, 31h ) : Er ror
'WW'-'HH '-'MN'- 'DS' : Pr esen t t imeWW : weekda ys
'0 '- '0 ' (30h , 30h) : Sun da y'0 '- '1 ' (30h, 31h ) : Monda y'0'- '2 ' (30h, 32h ) : Tuesd ay
'0 '- '3 ' (30h , 33h) : Wedn esda y'0 '- '4 ' (30h , 34h) : Thu rsd ay'0 '- '5 ' (30h, 35h ) : Frida y'0 '- '6 ' (30h , 36h) : Sa tu rd ay
H H : H ou r s
'0'-'0' (30h, 30 h) : 0|
'1'-'7' (31h , 37h ) : 23 (=17h )
MN : Minu tes'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)
DS : Dayl ight Saving (Sum mer Tim e)'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3)“Ch eck code
”for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
Header Mes s ageCheck
codeDelimiter
SOH -'0'-'0'- Mon itor ID -'B'-'1'- '0' STX-'C'-'3'- '1'- '2'-ST-WW-H H -MN-DS -ET X BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 33/94
- 33 -
(10) Pr esent Time read
<from P C to monit or>
The con t ro l le r r eques t the m on i tor t o r ep ly w i th th e P r es en t T im e . (Com m and)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser vedMonitor ID: Specify the Monitor ID of which you wan t to chan ge a set t ing.
E x.) If Mon itor I D is '1', specify 'A'.If Monit or ID is 'ALL ', specify '*' (2Ah).
'0 ' (30h): Message sender is the controller'A' (41h ): Messa ge Type is "Comm an d"
'0 '- '6 ' (30h , 36h): Mess age len gth is 6 bytes
Mes s ageSTX (02h) : S tar t of Message'C'- '2 ' - '1 ' - '1 ' (43h, 32h, 31h, 31h) : Present time read request command
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
Header Mes s age Checkcode Delimiter
SOH -'0'-Mon itor ID-'0'- 'A'-'0'-'6' STX-'C'-'2'-'1'-'1'-E TX BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 34/94
- 34 -
<from monit or t o PC : ACK>
The m onitor repl ies with a da ta t o th e control ler . . (Comma nd rep ly)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Ind icat e a r eplying Monitor ID.
Ex. ) When t h is byte is set t o 'A ', the replying Monitor ID is '1' .Whe n t his byte is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.
'B ' (42h): Message Type is "Comm an d rep ly"'0 '- 'E' (30h, 45h): Messa ge lengt h is 14 bytes
Mes s ageSTX (02h) : S tar t of Message'C'- '3 ' -'1 '- '1 ' (43h, 33h , 31h, 31h): P rese nt tim e rea d rep ly comm an d'WW'-'HH '-'MN'- 'DS' : Pr esen t t ime
WW : weekda ys'0 '- '0 ' (30h , 30h) : Sun da y'0 '- '1 ' (30h, 31h ) : Monda y'0'- '2 ' (30h, 32h ) : Tuesd ay'0 '- '3 ' (30h , 33h) : Wedn esda y'0 '- '4 ' (30h , 34h) : Thu rsd ay
'0 '- '5 ' (30h, 35h ) : Frida y'0 '- '6 ' (30h , 36h) : Sa tu rd ay
H H : H ou r s'0'-'0' (30h, 30 h) : 0
|
'1'-'7' (31h , 37h ) : 23 (=17h )
MN : Minu tes'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)
DS : Dayl ight Saving (Sum mer Tim e)'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
Header Mes s ageCheck
codeDelimiter
SOH -'0'-'0'- Mon itor ID -'B'-'0'- 'E' STX-'C'-'3'- '1'- '1'-WW-HH -MN-DS -ET X BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 35/94
- 35 -
(11) Program Timer write
<from P C to monit or>
The con t ro l le r r eques t the m on i tor t o wr it e th e P rogram Tim er . (Com m and)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved
Monitor ID: Specify the Monitor ID of which you wan t to chan ge a set t ing.E x.) If Mon itor I D is '1', specify 'A'.
If Monit or ID is 'ALL ', specify '*' (2Ah).'0 ' (30h): Message sender is the controller'A' (41h ): Messa ge Type is "Comm an d"'4 '- 'A' (34h, 41h): Messa ge lengt h is 74 bytes
Mes s ageSTX (02h) : S tar t of Message'C'- '2 ' -'1 '- '4 ' (43h, 32h , 31h, 34h) : Pr ogram Tim er wr ite comm an d'PG'- 'DAY'- 'ON_HOURS'- 'ON_MIN'- 'OFF_HOURS'- 'OFF_MIN'- ' INPUT'- 'MAIN'- 'SUB'- 'FUNC'- 'ST1'- 'MODE 1'-'HOU RS1'- 'MIN 1'-'MAIN1'- 'SU B1'-'ST2'-'MODE 2'-'HOU RS2'- 'MIN 2'-'MAIN2'- 'SU B2'-'ST3'-'MODE
3'- 'HOURS3'- 'MIN3'- 'MAIN3'- 'SUB3'- 'ST4'- 'MODE4'- 'HOURS4'- 'MIN4'- 'MAIN4'- 'SUB4' : Program data
PG : P rogram N o .'0'-'1' (30h, 31 h) : 1
|'0'-'A' (30h , 41h ) : 10 (=0Ah )
DAY : weekda ys'0 '- '0 ' (30h , 30h) : Sun da y'0 '- '1 ' (30h, 31h ) : Monda y'0'- '2 ' (30h, 32h ) : Tuesd ay'0 '- '3 ' (30h , 33h) : Wedn esda y'0 '- '4 ' (30h , 34h) : Thu rsd ay'0 '- '5 ' (30h, 35h ) : Frida y'0 '- '6 ' (30h , 36h) : Sa tu rd ay'0 '- '7 ' (30h , 37h) : Ever yda y
'0 '- '8 ' (30h , 38h) : Ever y Su nd ay'0 '- '9 ' (30h , 39h) : Every M onda y'0'- 'A' (30h, 41h) : Ever y Tu esda y'0 '- 'B' (30h , 42h) : Eve ry Wed ne sda y'0 '- 'C' (30h , 43h) : Eve ry Th ur sda y'0 '- 'D' (30h , 44h) : Every F rida y'0 '- 'E ' (30h, 45h) : Every Sa tu rda y
'F '-'F ' (46h, 46h) : - (no set tin g)
Header Mes s age Checkcode Delimiter
SOH-'0'-Monitor ID-'0'-'A'-'4'-'A'
STX-'C'-'2'- '1'- '4'- 'PG'-'DAY'-'ON_HOURS'-'ON_MIN'-'OFF_HOURS'- 'OFF_MIN'- ' INPUT'- 'MAIN'- 'SUB'- 'FUNC'-'ST1'- 'MODE1'- 'HOURS1'- 'MIN1'- 'MAIN1'- 'SUB1'-'ST2'- 'MODE2'- 'HOURS2'- 'MIN2'- 'MAIN2'- 'SUB2'-'ST3'- 'MODE3'- 'HOURS3'- 'MIN3'- 'MAIN3'- 'SUB3'-'ST4'- 'MODE4'- 'HOURS4'- 'MIN4'- 'MAIN4'- 'SUB4'-ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 36/94
- 36 -
ON_HOURS : tu rn on t im e (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'7' (31h , 37h ) : 23 (=17h )'F '-'F ' (46h, 46h) : - (no set tin g)
ON_MIN : tu r n on t im e (m inu tes )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
OFF _HOURS : tur n off t ime (hours )'0'-'0' (30h, 30 h) : 0
|'1'-'7' (31h , 37h ) : 23 (=17h )
'F '-'F ' (46h, 46h) : - (no set tin g)
OFF _MIN : tu rn off t ime (minu tes )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
INP UT : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE
'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
MAIN : s ingle/main/ left p ictur e inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI
'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
SUB : sub/r ight p ictu re inpu t source
'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O
'0'-'C' (30h, 43h) : DVD/HD1
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 37/94
- 37 -
'0 '- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2
'F'-'F ' (46h, 46h) : - (no set tin g)
FU NC : funct ion set t ing'0 '- '1 ' (30h, 31h ) : ORBITE R'0'- '2 ' (30h, 32h ) : INVER SE
'0'-'3' (30h, 33h) : WHITE'0'- '4 ' (30h , 35h) : REP EAT1'0'- '5 ' (30h , 36h) : REP EAT2'0'- '6 ' (30h , 37h) : REP EAT3'F'-'F ' (46h, 46h) : - (no set tin g)
ST1 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 1 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS1 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN1 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN1 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O
'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 38/94
- 38 -
SUB 1 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST2 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 2 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS2 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN2 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN2 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O
'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 39/94
- 39 -
SUB 2 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST3 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 3 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS3 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN3 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN3 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O
'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 40/94
- 40 -
SUB 3 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST4 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 4 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS4 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN4 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN4 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1
'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 41/94
- 41 -
SUB 4 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 42/94
- 42 -
<from monit or t o PC : ACK>
The m onitor repl ies with a da ta for confirma tion. . (Comm an d reply)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Ind icat e a r eplying Monitor ID.
Ex. ) When t h is byte is set t o 'A ', the replying Monitor ID is '1' .Whe n t his byte is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.
'B ' (42h): Message Type is "Comm an d rep ly"'4 '- 'C' (34h , 43h): Messa ge lengt h is 76 byt es
Mes s ageSTX (02h) : S tar t of Message'C'- '3 ' -'1 '- '4 ' (43h, 33h , 31h, 34h): P rogra m t ime r wr ite re ply com ma ndST : P res en t T im e S ta tus com m and
'0'- '0' (30h, 30h) : No error'0 '- '1 ' (30h, 31h ) : Er ror
'PG'- 'DAY'- 'ON_HOURS'- 'ON_MIN'- 'OFF_HOURS'- 'OFF_MIN'- ' INPUT'- 'MAIN'- 'SUB'- 'FUNC'- 'ST1'- 'MODE 1'-'HOU RS1'- 'MIN 1'-'MAIN1'- 'SU B1'-'ST2'-'MODE 2'-'HOU RS2'- 'MIN 2'-'MAIN2'- 'SU B2'-'ST3'-'MODE3'- 'HOURS3'- 'MIN3'- 'MAIN3'- 'SUB3'- 'ST4'- 'MODE4'- 'HOURS4'- 'MIN4'- 'MAIN4'- 'SUB4' : Program data
PG : P rogram N o .'0'-'1' (30h, 31 h) : 1
|'0'-'A' (30h , 41h ) : 10 (=0Ah )
DAY : weekda ys'0 '- '0 ' (30h , 30h) : Sun da y'0 '- '1 ' (30h, 31h ) : Monda y'0'- '2 ' (30h, 32h ) : Tuesd ay'0 '- '3 ' (30h , 33h) : Wedn esda y'0 '- '4 ' (30h , 34h) : Thu rsd ay'0 '- '5 ' (30h, 35h ) : Frida y'0 '- '6 ' (30h , 36h) : Sa tu rd ay'0 '- '7 ' (30h , 37h) : Ever yda y'0 '- '8 ' (30h , 38h) : Ever y Su nd ay'0 '- '9 ' (30h , 39h) : Every M onda y'0'- 'A' (30h, 41h) : Ever y Tu esda y'0 '- 'B' (30h , 42h) : Eve ry Wed ne sda y'0 '- 'C' (30h , 43h) : Eve ry Th ur sda y
'0 '- 'D' (30h , 44h) : Every F rida y'0 '- 'E ' (30h, 45h) : Every Sa tu rda y'F '-'F ' (46h, 46h) : - (no set tin g)
Header Mes s ageCheck
codeDelimite
r
SOH -'0'-'0 '- Monitor ID -'B'-'4'-'C'
STX-'C'-'3'- '1'- '4'- 'ST'-'PG'-'DAY'-'ON_HOURS'-'ON_MIN'-'OFF_HOURS'- 'OFF_MIN'- ' INPUT'- 'MAIN'- 'SUB'- 'FUNC'-'ST1'- 'MODE1'- 'HOURS1'- 'MIN1'- 'MAIN1'- 'SUB1'-'ST2'- 'MODE2'- 'HOURS2'- 'MIN2'- 'MAIN2'- 'SUB2'-'ST3'- 'MODE3'- 'HOURS3'- 'MIN3'- 'MAIN3'- 'SUB3'-
'ST4'- 'MODE4'- 'HOURS4'- 'MIN4'- 'MAIN4'- 'SUB4'-ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 43/94
- 43 -
ON_HOURS : tu rn on t im e (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'7' (31h , 37h ) : 23 (=17h )'F '-'F ' (46h, 46h) : - (no set tin g)
ON_MIN : tu r n on t im e (m inu tes )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
OFF _HOURS : tur n off t ime (hours )'0'-'0' (30h, 30 h) : 0
|'1'-'7' (31h , 37h ) : 23 (=17h )
'F '-'F ' (46h, 46h) : - (no set tin g)
OFF _MIN : tu rn off t ime (minu tes )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
INP UT : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE
'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
MAIN : s ingle/main/ left p ictur e inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI
'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
SUB : sub/r ight p ictu re inpu t source
'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O
'0'-'C' (30h, 43h) : DVD/HD1
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 44/94
- 44 -
'0 '- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2
'F'-'F ' (46h, 46h) : - (no set tin g)
FU NC : funct ion set t ing'0 '- '1 ' (30h, 31h ) : ORBITE R'0'- '2 ' (30h, 32h ) : INVER SE
'0'-'3' (30h, 33h) : WHITE'0'- '4 ' (30h , 35h) : REP EAT1'0'- '5 ' (30h , 36h) : REP EAT2'0'- '6 ' (30h , 37h) : REP EAT3'F'-'F ' (46h, 46h) : - (no set tin g)
ST1 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 1 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS1 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN1 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN1 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1
'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 45/94
- 45 -
SUB 1 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST2 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 2 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS2 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN2 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN2 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1
'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 46/94
- 46 -
SUB 2 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST3 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 3 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS3 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN3 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN3 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1
'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 47/94
- 47 -
SUB 3 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST4 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 4 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS4 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN4 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN4 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1
'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 48/94
- 48 -
SUB 4 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 49/94
- 49 -
(12) Pr ogra m Timer rea d
<from P C to monit or>
The con t ro l le r r eques t the m on i tor t o r ep ly w i th th e P r ogram Tim er . (Com m an d)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser vedMonitor ID: Specify the Monitor ID of which you wan t to chan ge a set t ing.
E x.) If Mon itor I D is '1', specify 'A'.If Monit or ID is 'ALL ', specify '*' (2Ah).
'0 ' (30h): Message sender is the controller'A' (41h ): Messa ge Type is "Comm an d"
'0 '- '8 ' (30h , 38h): Mess age len gth is 8 bytes
Mes s ageSTX (02h) : S tar t of Message'C '-'2 '-'1 '- '3 ' (43h, 32h, 31h , 33h) : Progra m Timer read reque s t comm an d
PG : P rogram No .
'0'-'1' (30h, 31 h) : 1|
'0'-'A' (30h , 41h ) : 10 (=0Ah )
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
Header Mes s age Checkcode Delimiter
SOH -'0'-Mon itor ID-'0'- 'A'-'0'-'8' STX-'C'-'2'-'1'-'3'-'PG '-ETX BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 50/94
- 50 -
<from monit or t o PC : ACK>
The m onitor repl ies with a da ta t o th e control ler . . (Comma nd rep ly)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Ind icat e a r eplying Monitor ID.
Ex. ) When t h is byte is set t o 'A ', the replying Monitor ID is '1' .Whe n t his byte is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.
'B ' (42h): Message Type is "Comm an d rep ly"'4 '- 'A' (34h, 41h): Messa ge lengt h is 74 bytes
Mes s ageSTX (02h) : S tar t of Message'C'- '3 ' -'1 '- '3 ' (43h, 33h , 31h, 33h): P rogra m Tim er r ead r eply com ma nd
'PG'- 'DAY'- 'ON_HOURS'- 'ON_MIN'- 'OFF_HOURS'- 'OFF_MIN'- ' INPUT'- 'MAIN'- 'SUB'- 'FUNC'- 'ST1'- 'MODE 1'-'HOU RS1'- 'MIN 1'-'MAIN1'- 'SU B1'-'ST2'-'MODE 2'-'HOU RS2'- 'MIN 2'-'MAIN2'- 'SU B2'-'ST3'-'MODE3'- 'HOURS3'- 'MIN3'- 'MAIN3'- 'SUB3'- 'ST4'- 'MODE4'- 'HOURS4'- 'MIN4'- 'MAIN4'- 'SUB4' : Program data
PG : P rogram N o .'0'-'1' (30h, 31 h) : 1
|'0'-'A' (30h , 41h ) : 10 (=0Ah )
DAY : weekda ys'0 '- '0 ' (30h , 30h) : Sun da y'0 '- '1 ' (30h, 31h ) : Monda y'0'- '2 ' (30h, 32h ) : Tuesd ay'0 '- '3 ' (30h , 33h) : Wedn esda y'0 '- '4 ' (30h , 34h) : Thu rsd ay'0 '- '5 ' (30h, 35h ) : Frida y'0 '- '6 ' (30h , 36h) : Sa tu rd ay'0 '- '7 ' (30h , 37h) : Ever yda y'0 '- '8 ' (30h , 38h) : Ever y Su nd ay'0 '- '9 ' (30h , 39h) : Every M onda y'0'- 'A' (30h, 41h) : Ever y Tu esda y'0 '- 'B' (30h , 42h) : Eve ry Wed ne sda y'0 '- 'C' (30h , 43h) : Eve ry Th ur sda y'0 '- 'D' (30h , 44h) : Every F rida y'0 '- 'E ' (30h, 45h) : Every Sa tu rda y'F '-'F ' (46h, 46h) : - (no set tin g)
Header Mes s ageCheck
codeDelimiter
SOH -'0'-'0 '- Monit or I D –
'B'-'4'-'A'
STX-'C'-'3'- '1'- '3'- 'PG'-'DAY'-'ON_HOURS'-'ON_MIN'-'OFF_HOURS'- 'OFF_MIN'- ' INPUT'- 'MAIN'- 'SUB'- 'FUNC'-'ST1'- 'MODE1'- 'HOURS1'- 'MIN1'- 'MAIN1'- 'SUB1'-'ST2'- 'MODE2'- 'HOURS2'- 'MIN2'- 'MAIN2'- 'SUB2'-'ST3'- 'MODE3'- 'HOURS3'- 'MIN3'- 'MAIN3'- 'SUB3'-
'ST4'- 'MODE4'- 'HOURS4'- 'MIN4'- 'MAIN4'- 'SUB4'-ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 51/94
- 51 -
ON_HOURS : tu rn on t im e (hour s )
'0'-'0' (30h, 30 h) : 0|
'1'-'7' (31h , 37h ) : 23 (=17h )'F '-'F ' (46h, 46h) : - (no set tin g)
ON_MIN : tu r n on t im e (m inu tes )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
OFF _HOURS : tur n off t ime (hours )'0'-'0' (30h, 30 h) : 0
|'1'-'7' (31h , 37h ) : 23 (=17h )'F '-'F ' (46h, 46h) : - (no set tin g)
OFF _MIN : tu rn off t ime (minu tes )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
INP UT : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L
'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
MAIN : s ingle/main/ left p ictur e inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2
'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
SUB : sub/r ight p ictu re inpu t source'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV
'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O
'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2
'F'-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 52/94
- 52 -
FU NC : funct ion set t ing'0 '- '1 ' (30h, 31h ) : ORBITE R'0'- '2 ' (30h, 32h ) : INVER SE'0'-'3' (30h, 33h) : WHITE'0'- '4 ' (30h , 35h) : REP EAT1
'0'- '5 ' (30h , 36h) : REP EAT2'0'- '6 ' (30h , 37h) : REP EAT3'F'-'F ' (46h, 46h) : - (no set tin g)
ST1 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 1 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE
'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS1 : working t ime (hour s )
'0'-'0' (30h, 30 h) : 0|
'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN1 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN1 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)
'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 53/94
- 53 -
SUB 1 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST2 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 2 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS2 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN2 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN2 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O
'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 54/94
- 54 -
SUB 2 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST3 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 3 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS3 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN3 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN3 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1
'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 55/94
- 55 -
SUB 3 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST4 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 4 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS4 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN4 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN4 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1
'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 56/94
- 56 -
SUB 4 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 57/94
- 57 -
(13) Repeat Timer write
<from P C to monit or>
The con t ro l le r r eques t the m on i tor t o wr it e th e Repea t T im er . (Com m an d)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser vedMonitor ID: Specify the Monitor ID of which you wan t to chan ge a set t ing.
E x.) If Mon itor I D is '1', specify 'A'.If Monit or ID is 'ALL ', specify '*' (2Ah).
'0 ' (30h): Message sender is the controller'A' (41h ): Messa ge Type is "Comm an d"'3 '- '6 ' (33h , 36h): Mess age len gth is 54 bytes
Mes s age
STX (02h) : S tar t of Message'C'- '2 ' -'2 '- '1 ' (43h, 32h , 32h, 31h) : Repeat Tim er w rit e comm an d'ST1'-'MODE 1'-'HOU RS1'- 'MIN1'- 'MAIN1'- 'SU B1'-'ST2'- 'MODE 2'-'HOU RS2'- 'MIN 2'-'MAIN2'- 'SU B2'-'ST3'- 'MODE3'- 'HOURS3'- 'MIN3'- 'MAIN3'- 'SUB3'- 'ST4'- 'MODE4'- 'HOURS4'- 'MIN4'- 'MAIN4'- 'SUB4' :R e p ea t d a t a
ST1 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 1 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS1 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
Header Mes s age Checkcode Delimiter
SOH-'0'-Monitor ID-'0'-'A'-'3'-'6'
STX-'C'-'2'-'2'-'1'-'ST1'- 'MODE1'- 'HOURS1'- 'MIN1'- 'MAIN1'- 'SUB1'-'ST2'- 'MODE2'- 'HOURS2'- 'MIN2'- 'MAIN2'- 'SUB2'-'ST3'- 'MODE3'- 'HOURS3'- 'MIN3'- 'MAIN3'- 'SUB3'-'ST4'- 'MODE4'- 'HOURS4'- 'MIN4'- 'MAIN4'- 'SUB4'-ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 58/94
- 58 -
MIN1 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN1 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
SUB 1 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST2 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 2 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT
'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS2 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|
'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 59/94
- 59 -
MIN2 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN2 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
SUB 2 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST3 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 3 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT
'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS3 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|
'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 60/94
- 60 -
MIN3 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN3 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
SUB 3 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST4 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 4 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT
'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS4 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|
'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 61/94
- 61 -
MIN4 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN4 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
SUB 4 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 62/94
- 62 -
<from monit or t o PC : ACK>
The m onitor repl ies with a da ta for confirma tion. . (Comm an d reply)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Ind icat e a r eplying Monitor ID.
Ex. ) When t h is byte is set t o 'A ', the replying Monitor ID is '1' .
Whe n t his byte is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.'B ' (42h): Message Type is "Comm an d rep ly"'3 '- '8 ' (33h , 38h): Mess age len gth is 56 bytes
Mes s ageSTX (02h) : S tar t of Message'C'- '3 ' -'2 '- '1 ' (43h, 33h , 32h, 31h): Repe at tim er wr ite rep ly comm an dST : P res en t T im e S ta tus com m and
'0'- '0' (30h, 30h) : No error'0 '- '1 ' (30h, 31h ) : Er ror
'ST1'-'MODE 1'-'HOU RS1'- 'MIN1'- 'MAIN1'- 'SU B1'-'ST2'- 'MODE 2'-'HOU RS2'- 'MIN 2'-'MAIN2'- 'SU B2'-'ST
3'- 'MODE3'- 'HOURS3'- 'MIN3'- 'MAIN3'- 'SUB3'- 'ST4'- 'MODE4'- 'HOURS4'- 'MIN4'- 'MAIN4'- 'SUB4' :R e p ea t d a t a
ST1 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 1 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS1 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
Header Mes s ageCheck
codeDelimite
r
SOH -'0'-'0 '- Monitor ID -'B'-'3'-'8'
STX-'C'-'3'-'2'-'1'-'ST'-''ST1'- 'MODE1'- 'HOURS1'- 'MIN1'- 'MAIN1'- 'SUB1'-'ST2'- 'MODE2'- 'HOURS2'- 'MIN2'- 'MAIN2'- 'SUB2'-'ST3'- 'MODE3'- 'HOURS3'- 'MIN3'- 'MAIN3'- 'SUB3'-
'ST4'- 'MODE4'- 'HOURS4'- 'MIN4'- 'MAIN4'- 'SUB4'-ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 63/94
- 63 -
MIN1 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN1 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
SUB 1 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST2 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 2 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT
'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS2 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|
'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 64/94
- 64 -
MIN2 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN2 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
SUB 2 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2
'F'-'F ' (46h, 46h) : - (no set tin g)
ST3 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 3 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R
'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS3 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 65/94
- 65 -
MIN3 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN3 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
SUB 3 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST4 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 4 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT
'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS4 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|
'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 66/94
- 66 -
MIN4 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
MAIN4 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
SUB 4 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.Delimiter
CR (0Dh): En d of packet
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 67/94
- 67 -
(14) Repeat Timer rea d
<from P C to monit or>
The con t ro l le r r equ es t th e m on i to r to r ep ly w ith the Repea t T im er . (Com m an d)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser vedMonitor ID: Specify the Monitor ID of which you wan t to chan ge a set t ing.
E x.) If Mon itor I D is '1', specify 'A'.If Monit or ID is 'ALL ', specify '*' (2Ah).
'0 ' (30h): Message sender is the controller'A' (41h ): Messa ge Type is "Comm an d"
'0 '- '6 ' (30h , 36h): Mess age len gth is 6 bytes
Mes s ageSTX (02h) : S tar t of Message'C'- '2 ' - '2 ' - '0 ' (43h, 32h, 32h, 30h) : Repeat Timer read request command
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
Header Mes s age Checkcode Delimiter
SOH -'0'-Mon itor ID-'0'- 'A'-'0'-'6' STX-'C'-'2'-'2'-'0'-E TX BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 68/94
- 68 -
<from monit or t o PC : ACK>
The m onitor repl ies with a da ta t o th e control ler . . (Comma nd rep ly)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Ind icat e a r eplying Monitor ID.
Ex. ) When t h is byte is set t o 'A ', the replying Monitor ID is '1' .
Whe n t his byte is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.'B ' (42h): Message Type is "Comm an d rep ly"'3 '- '6 ' (33h , 36h): Mess age len gth is 54 bytes
Mes s ageSTX (02h) : S tar t of Message'C'- '3 ' -'2 '- '0 ' (43h, 33h , 32h, 30h): Repe at Tim er r ea d rep ly comm an d
'ST1'-'MODE 1'-'HOU RS1'- 'MIN1'- 'MAIN1'- 'SU B1'-'ST2'- 'MODE 2'-'HOU RS2'- 'MIN 2'-'MAIN2'- 'SU B2'-'ST3'- 'MODE3'- 'HOURS3'- 'MIN3'- 'MAIN3'- 'SUB3'- 'ST4'- 'MODE4'- 'HOURS4'- 'MIN4'- 'MAIN4'- 'SUB4' :R e p ea t d a t a
ST1 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 1 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE
'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS1 : working t ime (hour s )'0'-'0' (30h, 30 h) : 0
|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN1 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
Header Mes s ageCheck
codeDelimiter
SOH -'0'-'0 '- Monit or I D –
'B'-'3'-'6'
STX-'C'-'3'-'2'-'0'-'ST1'- 'MODE1'- 'HOURS1'- 'MIN1'- 'MAIN1'- 'SUB1'-'ST2'- 'MODE2'- 'HOURS2'- 'MIN2'- 'MAIN2'- 'SUB2'-'ST3'- 'MODE3'- 'HOURS3'- 'MIN3'- 'MAIN3'- 'SUB3'-
'ST4'- 'MODE4'- 'HOURS4'- 'MIN4'- 'MAIN4'- 'SUB4'-ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 69/94
- 69 -
MAIN1 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
SUB 1 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2
'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST2 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 2 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS2 : working t ime (hour s )
'0'-'0' (30h, 30 h) : 0|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN2 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|
'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 70/94
- 70 -
MAIN2 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
SUB 2 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2
'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST3 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 3 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS3 : working t ime (hour s )
'0'-'0' (30h, 30 h) : 0|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN3 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|
'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 71/94
- 71 -
MAIN3 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
SUB 3 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2
'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ST4 : Sta te'0'-'0' (30h , 30h ) : OF F'0'-'1' (30h , 31h ) : ON
MODE 4 : inpu t m ode (s ingle or spl i t screen)'0 '- '1 ' (30h, 31h ) : SIN GLE'0'-'2' (30h , 32h ) : S BY S 1'0'-'3' (30h , 33h ) : S BY S 2L'0'-'4' (30h , 34h ) : S BY S 2R'0'- '5 ' (30h , 35h) : BOTTOM LE FT'0'- '6 ' (30h , 36h) : BOTTOM RIGH T'0'- '7 ' (30h , 37h) : TOP RIGH T'0'- '8 ' (30h , 38h) : TOP LE FT'F'-'F ' (46h, 46h) : - (no set tin g)
HO URS4 : working t ime (hour s )
'0'-'0' (30h, 30 h) : 0|'1'-'8' (31h , 38h ) : 24 (=18h )'F '-'F ' (46h, 46h) : - (no set tin g)
MIN4 : workin g t ime (min ut es )'0'-'0' (30h, 30 h) : 0
|
'3'- 'B' (33h, 42h) : 59 (=3Bh)'F '-'F ' (46h, 46h) : - (no set tin g)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 72/94
- 72 -
MAIN4 : s ingle/main/ left p ictu re inpu t sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1
'0'-'6' (30h, 36h) : VIDEO2'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
SUB 4 : sub/r ight p icture inp ut sour ce'0'-'1' (30h , 31h ) : VGA (SCART 3)'0'- '2' (30h, 32h) : RGB/HV'0'-'3' (30h, 33 h) : DVI'0'- '5' (30h, 35h) : VIDEO1'0'-'6' (30h, 36h) : VIDEO2
'0'-'7' (30h , 37h ) : S-VIDE O'0'-'C' (30h, 43h) : DVD/HD1'0'- 'D' (30h, 44h ) : DVD/HD2 (SCART1/SCART2'F'-'F ' (46h, 46h) : - (no set tin g)
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 73/94
- 73 -
(15) FREQUENCY data r eading
<from P C to monit or>
The con t ro l le r r eques t the m on i tor t o r ead th e FRE QUEN CY da ta of inpu t s igna l .(Com m an d)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser vedMonitor ID: Specify the Monitor ID of which you wan t to chan ge a set t ing.
E x.) If Mon itor I D is '1', specify 'A'.If Monit or ID is 'ALL ', specify '*' (2Ah).
'0 ' (30h): Message sender is the controller'A' (41h ): Messa ge Type is "Comm an d"
'0 '- '4 ' (30h , 34h): Mess age len gth is 4 bytes
Mes s ageSTX (02h) : S tar t of Message'0' -'7 ' (30h, 37h) : FRE QUE NCY data rea d comm an d
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
Header Mes s age Checkcode Delimiter
SOH -'0'-Mon itor ID-'0'- 'A'-'0'-'4' STX-'0'-'7'-ETX BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 74/94
- 74 -
<from monit or t o PC : ACK>
The m onitor repl ies with a m essage for conf irma tion. . (Comm an d reply)
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Ind icat e a r eplying Monitor ID.
Ex. ) When t h is byte is set t o 'A ', the replying Monitor ID is '1' .Whe n t his byte is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.
'B ' (42h): Message Type is "Comm an d rep ly"'0 '- 'E' (30h, 45h): Messa ge lengt h is 14 bytes
Mes s ageSTX (02h) : S tar t of Message'4 '- 'E' (34h, 45h ): Tim ing m essa ge OP code
SS : T im ing S ta tus by teBit7 = 1 : Syn c.Fr eq. out of ra nge
0 : norm a lBit6 = 1 : Un s ta ble count
0 : norm a lBit5-2 = 0 : Reserved m ust be 0Bit1 = 1 : P os it ive Horizonta l sync polar i ty
0 : Negat ive H orizont al sync polar i tyBit0 = 1 : Pos i t ive Ver t ical syn c polar i ty
0 : Negat ive Ver t ical sync polar i ty
HH : Hor izon ta l F requency H igh by teHL : Hor izont al Fr equen cy Low byte
VH : Ver t ical Freque ncy High byteVL : Ver t ical F requ ency Low byte
For exam ple; Inpu t s igna l is H : 65.28KHz and V : 59.95Hz.-> HH & H L is '1 '- '9 ' -'8 '- '0 ' (31h, 39h , 38h, 3 0h)
VH & VL is '1 ' -'7 ' -'6 '- 'B' (31h, 37h , 36h , 42h) -------- need to cha nge from D EC to H E X
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
Header Mes s ageCheck
codeDelimiter
SOH -'0'-'0'- Mon itor ID -'B'-'0'- 'E' STX-'4'-'E'-SS-H H -HL -VH-VL-ET X BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 75/94
- 75 -
(16) Remocon Code Cont rol
<from P C to monit or>
The cont roller r equests th e monitor t o support Remocon code.
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser vedMonitor ID: Specify the Monitor ID wh ich you wan t to chan ge a set t ing.
E x.) If Mon itor I D is '1', specify 'A' (41h ).
If Monit or ID is 'ALL ', specify '*' (2Ah).'0 ' (30h): Message sender is the controller'A' (41h): Message type is "Comm an d"'0 '- 'C' (30h , 43h): Messa ge lengt h is 12 byt es
Mes s ageSTX (02h) : S tar t of Message'C'-'2 ’, '1 '- '0 ' (43h, 32 h, 31h , 30h) : Rem ocon code cont rol com m an d
CodeH : Rem ocon code H igh byt e, '0 '- '0 ' (30h , 30h ) ----FIXCodeL : Rem ocon code Low byte;
'1'-'4' (31h , 34h ) : cur sol down
'1'- '5' (31h, 35h) : cursol up'1 '- '6 ' (31h, 36h ) : volum e down
'1'- '7 ' (31h, 37h ) : volum e u p'1'- '9' (31h, 39h) : display'1'-'F' (31h , 46h ) : exit'2 '- '0 ' (32h, 30h ) : men u'2'-'1' (32h, 31h ) : cur sol left (-)'2 '- '2 ' (32h, 32h ) : cur sol r igh t (+)'2'-'3' (32h, 33h ) : set'2'-'4' (32h, 34h ) : pip'2'-'6' (32h , 36h ) : swa p'2'-'7' (32h , 37h ) : sele ct/freeze
'2 '- '8 ' (32h, 38h) : capt ur e'4'-'F' (34h , 46h ) : s by s'5'-'0' (35h , 30h ) : sin gle
Cnt : repeat nu mber ; norma lly '0' -'1 ' (30h, 31h)
ET X (03h) : End of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “ Check code” for a BCC calculat ion.
DelimiterCR (0Dh): End of packet .
Header Mes s age Checkcode
Delimiter
SOH -'0'-Mon itor ID-'0'- 'A'-'0'-'C' STX-'C'-'2'- '1'- '0'-CodeH-CodeL-
Cnt -ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 76/94
- 76 -
< from mon itor t o PC : ACK >
The m onitor replies a dat a for confirma tion ( ex. Cha nge t o VGA)
H e a d e rSOH (01h): S ta r t Of Header
'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Indicat e a r eplying Monitor ID.
Ex.) When th is byte is set to 'A' (41h) , the r eplying Monitor ID is '1 '.Wh en t his byt e is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.
'B ' (42h): Message type is " Comm an d r eply "'0 '- 'E' (30h, 45h) : Message len gth is 14 bytes
Mes s ageSTX (02h) : S tar t of Message
'C'- '3 ' -'1 '- '0 ' (43h, 33h , 31h, 3 0h): Rem ocon code contr ol reply comm an d
ST : In fo rm at ion s ta t us com m and'0'- '0' (30h, 30h) : No error'0 '- '1 ' (30h, 31h ) : Er ror
CodeH : Rem ocon code H igh byt e, '0 '- '0 ' (30h , 30h ) ----FIX
CodeL : Rem ocon code Low byte;'1'-'4' (31h , 34h ) : cur sol down'1'- '5' (31h, 35h) : cursol up'1 '- '6 ' (31h, 36h ) : volum e down'1'- '7 ' (31h, 37h ) : volum e u p'1'- '9' (31h, 39h) : display'1'-'F' (31h , 46h ) : exit'2 '- '0 ' (32h, 30h ) : men u'2'-'1' (32h, 31h ) : cur sol left (-)'2 '- '2 ' (32h, 32h ) : cur sol r igh t (+)'2'-'3' (32h, 33h ) : set'2'-'4' (32h, 34h ) : pip
'2'-'6' (32h , 36h ) : swa p'2'-'7' (32h , 37h ) : sele ct/freeze'2 '- '8 ' (32h, 38h) : capt ur e'4'-'F' (34h , 46h ) : s by s'5'-'0' (35h , 30h ) : sin gle
Cnt : repeat nu mber ; norma lly '0' -'1 ' (30h, 31h)
ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “ Check code” for a BCC calculat ion.
Delimiter
CR (0Dh): En d of pa cket.
Header Mes s age
Check
code DelimiterSOH-'0'- '0'-Monitor ID-'B'-'0'- 'E' STX-'C'-'3'- '1'- '0'-ST-CodeH-CodeL-
Cnt -ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 77/94
- 77 -
2) Menu Opera tion Comma nds (VCP comman ds)
(1) Operat ion code t able
In case of Menu Opera tion comm and s, th e OP code pa ge and OP code ar e following ta ble.
Table 1 Operat ion code t able
Item OP code
page
OP code Par am eter (dec) Remar k
PICTURE
CONTRAST 00h 12h 0 : low
|
100 : high
Center is 50.
BRIGHTNESS 00h 10h 0 : dark
|
100 : bright
Center is 50.
SHARPNESS 00h 8Ch 0 : dull
|100 : shar p
Center is 50.
COLOR 02h 1Fh 0 : pale
|
100 : deep
Center is 50.
TINT 00h 90h 0 : reddish
|
100 : greenish
Center is 50.
PICTURE MODE 02h 1Ah 3 : BRIGHT
4 : STANDARD
5 : CINEMA1
11 : CINEMA2
12 : DEFAULT
NR 02h 20h 0 : OFF
1 : NR-1
2 : NR-2
3 : NR-3 (max.)
COLOR TEMP. 00h 54h 47 : LOW
54 : MIDDLE LOW
69 : MIDDLE
84 : HIGH
WHITE BALANCE 00h RED GAIN : 16h
GREEN GAIN : 18h
BLUE GAIN : 1Ah
0 : min .
|
100 : ma x.
Center is 50.
GAMMA 02h 68h 9 : 2.1
4 : 2.2
10 : 2.3
8 : 2.4
7 : S
COLOR CONTROL 00h RED : 9Bh
GREEN : 9Dh
BLUE : 9Fh
YELLOW : 9Ch
MAGE NTA : A0h
CYAN : 9Eh
0 : min .
|
100 : ma x.
Center is 50.
COLOR CONTROL reset 02h CBh 0 : no execute
11 : execute
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 78/94
- 78 -
AUDIO
BASS 00h 91h 0 : min .
|
100 : ma x.
Center is 50.
TREBLE 00h 8Fh 0 : min.
|
100 : ma x.
Center is 50.
BALANCE 00h 93h 0 : left
|
100 : right
Center is 50.
AUDIO INP UT1 10h 13h 1 : VGA
2 : RGBHV
3 : DVI
5 : VIDEO1
6 : VIDEO2
7 : S-VIDE O
12 : DVD/HD113 : DVD/HD2
AUDIO INP UT2 10h 14h 1 : VGA
2 : RGBHV
3 : DVI
5 : VIDEO1
6 : VIDEO2
7 : S-VIDE O
12 : DVD/HD1
13 : DVD/HD2
AUDIO INP UT3 10h 15h 1 : VGA
2 : RGBHV
3 : DVI
5 : VIDEO1
6 : VIDEO2
7 : S-VIDE O
12 : DVD/HD1
13 : DVD/HD2
SCREEN
SIZE 02h 70h 1 : NORMAL
2 : FULL
3 : ZOOM
4 : DYNAMIC
11 : 2.35 : 112 : 14 : 9
13 : UNDE R SCAN
14 : TRUE
V-POSITION 00h 30h 0 : left side
|
128 : right side
Center is 64.
Depends on a
display timing.
H-POSITION 00h 20h 0 : bottom side
|
255 : right side
Center is 128.
Depends on a
display timing.
V-HIGHT 02h 51h 0 : norm al
|
64 : ma x.
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 79/94
- 79 -
H-WIDTH 02h 50h 0 : norma l
|
64 : ma x.
CLOCK PH ASE 00h 3Eh 0 :
|63 :
CLOCK 00h 0Eh 0 : min.
|
64 : ma x.
Center is 32
AUTO PICTURE 00h 1Eh 0 : OFF
1 : ON
UNDER SCAN 02h E3h 2 : OFF
1 : ON
OPTION
DISPLAY OSD 02h 3Dh 0 : OFF
1 : ON
OSD POSITION 02h 38h 1 : min.
|
6 : max.
OSD ORBITER 10h 1Bh 1 : ON
2 : OFF
OSD TRANSP. 02h B8H 5 : 50%
6 : 60%
7 : 70%
8 : 80%
9 : 90%
10 : 100%
BNC INPUT 10h 17h 1 : RGB
2 : COMP
3 : SCART1
4 : SCART2
D-SUB INPUT 10h 18h 1 : RGB
4 : SCART2
5 : SCART3
RGB SELE CT 02h DAh 1 : AUTO
11 : type1
12 : type2
13 : type3
14 : type415 : type5
HD SELE CT 10h 1Ah 1 : 1080I (1080B)
2 : 540P (1080A)
INPUT SKIP 10h 1Ch 1 : ON
2 : OFF
ALL RESE T 02h CBh 0 : no execute
1 : execut e
POWER SAVE 00h E1h 0 : OFF
1 : ON
FILM MODE 02h 23h 1 : OFF
2 : ON
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 80/94
- 80 -
PLE 02h DCh 1 : AUTO / 100%
2 : LOCK1 / 75%
3 : LOCK2 / 50%
ORBITER 02h DDh 0 : OFF
250 : AUTO1251 : AUTO2
252 : RANDOM1
253 : RANDOM2
254 : MANUAL
ORBITER DOT 10h 1Dh 1 : min . (1dot)
|
20 : max. (20dots)
ORBITER LINE 10h 1Eh 1 : min . (1line)
|
20 : max. (20lines)
ORBITER INTE RVAL 10h 1Fh 1 : min . (1minut e)|
5 : max. (5minut es)
INVERSE/WHITE 02h C9h 0 : OFF
2 : WHITE
255 : INVERSE
INVERSE/WHITE
working t ime
10h 20h 1 : ON
2 : 0h 03m
3 : 0h 06m
4 : 0h 09m
|
11 : 0h 30m
12 : 0h 33m
|
254 : 12h 39m
255 : 12h 42m
256 : 12h 45m (ma x)
INVERSE/WHITE
waiting time
10h 21h 2 : 0h 03m
3 : 0h 06m
|
255 : 12h 42m
256 : 12h 45m (ma x)
COOLING FAN 02h 7Dh 1 : AUTO
2 : ForcedSIDE MASK 02h DFh 0 : black
|
15 : gra y
PICTURE SIZE 10h 22h 1 : ON
2 : OFF
DVI MODE
(PLUG/PLAY)
02h CFh 1 : DVI-PC
2 : DVI-HD
DVI MODE LEVEL 10h 23h 1 : LOW
2 : HIGH
PROTOCOL SET 10h 24h 1 : ON
2 : OFF
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 81/94
- 81 -
CLOSED CAPTION 10h 25h 1 : CC1
2 : CC2
3 : CC3
4 : CC4
5 : TEXT1
6 : TEXT2
7 : TEXT3
8 : TEXT4
9 : OFF
CAPTION CONT 10h 26h 1: NORMAL
2 : HIGH
TIMER 10h 31h 1 : PROGRAM
2 : REP EAT
3 : OFF
INPUT DETECT 02h 40h 0 : AUTO
1 : LAST
10 : MULTI
11 : VGA
12 : RGBHV
13 : DVI
15 : VIDEO1
16 : VIDEO2
17 : S-VIDEO
22 : DVD/HD1
23 : DVD/HD2
INPUT DETECT MAIN
PICTURE INP UT
10h 27h 1 : VGA
2 : RGBHV
3 : DVI5 : VIDEO1
6 : VIDEO2
7 : S-VIDE O
12 : DVD/HD1
13 : DVD/HD2
INPUT DETECT SUB
PICTURE INP UT
10h 28h 1 : VGA
2 : RGBHV
3 : DVI
5 : VIDEO1
6 : VIDEO2
7 : S-VIDE O
12 : DVD/HD1
13 : DVD/HD2
INPUT DETECT
VOLUME
10h 29h 0 : min .
|
100 : ma x.
101 : LAST
INPUT DETECT
PRIORITY
10h 2Ah 1 : RGB
2 :VIDEO
CONTROL LOCK 00h FBh 0 : ON
1 : OFF
IR REMOTE 02h 3Fh 1 : ON
4 : OFF
LOOP OUT 10h 2Bh 1 : ON
2 : OFF
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 82/94
- 82 -
MONITOR ID 02h 3Eh 0 : ALL
1-26 : ID
RS232C CONTROL 10h 34h 1 : NORMAL
3 : 2ND
VIDEO WALL DIVIDER 02h D0h 0 : OFF11 : 2X2
12 : 3X3
13 : 4X4
14 : 5X5
15 : 5X1
16 : 4X1
17 : 3X1
18 : 2X1
19 : 1X2
20 : 1X3
21 : 1X4
22 : 1X5
VIDEO WALL
POSITION
02h D2h 1 : No.1
|
56 :No.56.
VIDEO WALL DISP.
MODE
02h D5h 1 : SPLIT
2 : BLANK
Power ON DELAY 02h D8h 0 : OFF
5 : 5SEC
10 : 10SEC
15 : 15SEC
SUB P. DETECT MODE 10h 03h 1 : AUTO
2 : OFFSUB P. DISP LAY 10h 04h 1 : FADE
2 : NORMAL
SUB P. RATE 10h 05h 2 : 20%
3 : 30%
4 : 40%
5 : 50%
6 : 60%
7 : 70%
8 : 80%
9 : 90%
10 : 100%
ZOOM NAV 10h 06h 2 : S BY S2R
4 : BTM LEF T
5 : BTM RIGHT
6 : TOP RIGHT
7 : TOP LEFT
8 : OFF
PIC FREEZE 10h 07h 1 : S BY S1
3 : S BY S3
4 : BTM LEF T
5 : BTM RIGHT
6 : TOP RIGHT
7 : TOP LEFT
8 : OFF
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 83/94
- 83 -
QUICK SWAP 10h 10h 1 : ON
2 : OFF
QUICK SWAP SELE CT1 10h 11h 1 : VGA
2 : RGBHV
3 : DVI5 : VIDEO1
6 : VIDEO2
7 : S-VIDE O
12 : DVD/HD1
13 : DVD/HD2
QUICK SWAP SELE CT2 10h 12h 1 : VGA
2 : RGBHV
3 : DVI
5 : VIDEO1
6 : VIDEO2
7 : S-VIDE O
12 : DVD/HD1
13 : DVD/HD2
TEXT INSERT MODE 10h 08h 1 : OFF
4 : BOTTOM1
5 : BOTTOM2
6 : BOTTOM3
7 : MIDDLE LOW
8 : MIDDLE HI GH
9 : TOP3
10 : TOP2
11 : TOP1
12 : LEF T13 : RIGHT
TEXT INSERT INPU T 10h 0Eh 1 : VGA
2 : RGBHV
3 : DVI
TEXT INSE RT DETE CT 10h 0Ch 1 : AUTO
2 : OFF
TEXT INSE RT DISP LAY 10h 0Dh 1 : FADE
2 : NORMAL
TEXT INSE RT RATE 10h 0Bh 2 : 20%
3 : 30%
4 : 40%
5 : 50%
6 : 60%
7 : 70%
8 : 80%
9 : 90%
10 : 100%
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 84/94
- 84 -
MAIN MEN U
ADVANCED OSD 10h 0Fh 1 : ON
2 : OFF
LANGUAGE 00h 72h 1 : EN GLISH
2 : GERMAN3 : FRE NCH
4 : SPANISH
5 : JAPANES E
6 : ITALIAN
7 : SWEDISH
9 : RUSSIAN
12 : PORTUGUESE
22 : GREEK
23 : TURKISH
COLOR SYSTEM 02h 21h 1 : 3.58 NTSC
2 : PAL
3 : SECAM
4 : AUTO
5 : 4.43NTSC
6 : PAL60
7 : PAL-N
8 : PAL-M
GENERAL
Volume cont rol 00h 62h 0 : min .
|
100 : ma x.
Audio Mute 00h 8Dh 0,2: UNMUTE
1: MUTE
SPLIT SCREENSELECT
(PIP / S BY S)
02h 72h 1 : SINGLE screen5 : S BY S1
6 : S BY S3
11 : S BY S2L
12 : S BY S2R
13 : S BY S4L
14 : S BY S4R
15 : PIP1 (size1)
16 : PIP2 (size1)
17 : PIP3 (size1)
18 : PIP4 (size1)
19 : PIP1 (size2)
20 : PIP2 (size2)21 : PIP3 (size2)
22 : PIP4 (size2)
23 : PIP1 (size3)
24 : PIP2 (size3)
25 : PIP3 (size3)
26 : PIP4 (size3)
27 : PIP1 (size4)
28 : PIP2 (size4)
29 : PIP3 (size4)
30 : PIP4 (size4)
*PIP1 isBOTTOM LEFT
sub screen.
*PIP2 is
BOTTOM
RHIGHT
sub screen.
*PIP3 is
TOP RHIGHT
sub screen.
*PIP4 is
TOP LEFT
sub screen.
*size1 is sm aller
sub screen.
*size4 is bigger
Sub screen.
ACTIVE SELE CT 10h 30h 1 : MAIN(PIP) or
LEFT(S BY S),
2 : SUB(PIP ) or
RIGHT(S BY S)
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 85/94
- 85 -
PIP Input switch chan ge
(Sub/Right picture)
02h 73h 1 : VGA
2 : RGBHV
3 : DVI
5 : VIDEO1
6 : VIDEO2
7 : S-VIDE O
12 : DVD/HD1
13 : DVD/HD2
Note 1) :
When you wat t t o adjust th e sett ing value of AUDIO INPUT1, 2 & 3 in AUDIO menu ,
please never choose th e same inpu t sour ce among AUDIO1,2 and 3.
The default sett ing values of AUDIO INPUT ar e as follows,
AUDIO1 : VIDEO1
AUDIO2 : DVD/HD1
AUDIO3 : VGA
Note 2) :
When you wat t t o adjust th e setting value of PIP In put switch chan ge,
please never choose th e same inpu t s ource between Main pictur e and Sub pictur e.
Note 3) :
When you wat t t o adjust th e setting value of PIP In put switch chan ge,
please never choose VGA an d RGBHV input at same t ime as Main pictur e and Sub pictur e.
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 86/94
- 86 -
(2) Typical pr ocedu re exa mple (“Brightness” setting)
The fol lowing is a sam ple of procedures to cont rol th e monitor , these a re exam ples of "Get pa ra met er" and
"Se t pa ram ete r ".
Step 1. Get para meterThe con t r o ll e r r eques t s t he Moni to r to r ep ly w ith the cu r ren t b r igh tn es s s e t t ing an d capab i l ity to s uppor t
th is operat ion.
Hea der Message Check code Delimiter
SOH -'0'-Mon itor ID-'0'- 'C'-'0'- '6' STX-'0'-'0'-'1'-'0'-ETX BCC CR
H e a d e r
SOH (01h): S ta r t Of Header'0 ' (30h): Reser vedMonitor ID: Specify the Monitor ID f rom wh ich you wa nt to get a va lue.
E x.) If Mon itor ID is '1', specify 'A'.
If Monit or ID is 'ALL ', specify '*' (2Ah).'0 ' (30h): Message sender is the controller
'C ' (43h): Message is "Get pa ra met er comm an d"'0 '- '6 ' (30h , 36h): Mess age len gth is 6 bytes
Mes s ageSTX (02h) : S tar t of Message'0 '- '0 ' (30h , 30h): Oper at ion code page n um ber is 0'1 '- '0 ' (31h , 30h): Oper at ion code is 10h (in t he OP code pa ge 0)ETX (03h) : En d of Message
Che ck code
BCC: Block Ch eck CodeRefer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 87/94
- 87 -
Step 2. Get para meter reply
The m oni tor r ep l ies w i th cu r r en t Br igh tnes s s e t t ing a nd capab i li ty to s uppor t th i s opera t ion .
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved
'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Ind icat e a r eplying Monitor ID.
Ex. ) When t h is byte is set t o 'A ', the replying Monitor ID is '1' .Wh en t his byt e is set to '*' (2Ah), th e rep lying Monitor ID is 'ALL'.
'D ' (44h): Message Type is "Get par am eter reply"'1 '- '2 ' (31h , 32h): Mess age len gth is 18 bytes
Mes s ageSTX (02h) : S tar t of Message'0'- '0' (30h, 30h): Result code.
00 : No error01 : Uns uppor ted
'0 '- '0 ' (30h , 30h): Oper at ion code page n um ber is 0'1 '- '0 ' (31h , 30h): Oper at ion code is 10h (in t he p age 0)'0' -'0 ' (30h, 30h) : This opera t ion is "Set pa ra met er" type'0 '- '0 ' -'6 ' -'4 ' (30h, 30h, 36h , 34h): Bright nes s m ax va lue is 100(0064h )'0 '- '0 ' -'3 ' -'2 ' (30h, 30h, 33h, 32h ): Cu rr en t Br ight nes s sett ing is 50(0032h)ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
Hea der Message Check code Delimiter
SO H -'0'-'0'-Monit or ID -'D'-'1'-'2' ST X-'0'-'0'-'0'-'0'-'1'-'0'-'0'-'0'
-'0'-'0'-'6'-'4'-'0'-'0'-'3'-'2'-ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 88/94
- 88 -
Step 3. Set para meter
The con t ro l le r r eques t the m on i tor t o cha nge the Br igh tn es s s e t t ing
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved
Monitor ID: Specify the Monitor ID of which you wan t to chan ge a set t ing.E x.) If Mon itor I D is '1', specify 'A'.
If Monit or ID is 'ALL ', specify '*' (2Ah).'0 ' (30h): Message sender is the controller'E ' (45h): Message Type is "Set pa ra met er comm an d"'0 '- 'A' (30h, 41h): Messa ge lengt h is 10 bytes
Mes s ageSTX (02h) : S tar t of Message'0 '- '0 ' (30h , 30h): Oper at ion code page n um ber is 0'1 '- '0 ' (31h , 30h): Oper at ion code is 10h (in t he p age 0)
'0 '- '0 ' -'5 ' -'0 ' (30h, 30h, 35h , 30h): Set Br ight nes s set tin g 80(0050h)ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
Delimiter
CR (0Dh): En d of packet
Header Mes s ageCheck
codeDelimiter
SOH -'0'-Mon itor ID-'0'- 'E'- '0'-'A' STX-'0'-'0'-'1'-'0'-'0'-'0'-'5'-'0'-ETX BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 89/94
- 89 -
Step 4. Set par ameter r eply
The m onitor repl ies with a m essage for conf irma tion.
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Ind icat e a r eplying Monitor ID.
Ex. ) When t h is byte is set t o 'A ', the replying Monitor ID is '1' .Whe n t his byte is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.
'F ' (46h): Message Type is "Set pa ra met er re ply"'1 '- '2 ' (31h , 32h): Mess age len gth is 18 bytes
Mes s ageSTX (02h) : S tar t of Message'0'- '0' (30h, 30h): Result code.
00 : No error01 : Uns uppor ted
'0 '- '0 ' (30h , 30h): Oper at ion code page n um ber is 0'1 '- '0 ' (31h , 30h): Oper at ion code is 10h (in t he p age 0)'0' -'0 ' (30h, 30h) : This opera t ion is "Set pa ra met er" type'0 '- '0 ' -'6 ' -'4 ' (30h, 30h, 36h , 34h): Bright nes s m ax va lue is 100(0064h )'0 '- '0 ' -'5 ' -'0 ' (30h, 30h, 35h , 30h): Received a B righ tn ess set tin g was 8 0(0050h)ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
Delimiter
CR (0Dh): En d of packet
Step 5. Confirma tion
Repeat S tep 1 an d Step 2 , if you need to check the Br ightn ess set t ing. (Recomm ended)
Header Mes s ageCheck
codeDelimiter
SO H -'0'-'0'- Mon it or ID -'F'-'1'-'2' ST X-'0'-'0'-'0'-'0'-'1'-'0'-'0'-'0'-'0'-'0'-'6'-'4'-'0'-'0'-'5'-'0'-ETX
BCC CR
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 90/94
- 90 -
(3) Un supp orted OP code or P ar am eter
W hen t he p las m a m onito r r eceives uns u ppor ted OP code o r pa ra m ete r , th e m on i to r execu te by us ing the
Resul t code of uns uppor t ed a s fol lows .
ex 1. unsu pported OP code (Get Pa ra meter is “Black Level”)<from PC t o monitor>
Hea der Message Check code Delimiter
SOH -'0'-Mon itor ID-'0'- 'C'-'0'- '6' STX-'0'-'0'-'9'-'2'-ETX BCC CR
H e a d e rSOH (01h): S ta r t Of Header
'0 ' (30h): Reser vedMonitor ID: Specify the Monitor ID f rom wh ich you wa nt to get a va lue.
E x.) If Mon itor ID is '1', specify 'A'.If Monit or ID is 'ALL ', specify '*' (2Ah).
'0 ' (30h): Message sender is the controller'C ' (43h): Message is "Get pa ra met er comm an d"
'0 '- '6 ' (30h , 36h): Mess age len gth is 6 bytes
Mes s ageSTX (02h) : S tar t of Message'0 '- '0 ' (30h , 30h): Oper at ion code page n um ber is 0'9 '- '2 ' (39h , 32h): Oper at ion code is 92h (in t he OP code pa ge 0)ET X (03h): E nd of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3)“Ch eck code
”for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
< from m onitor to PC : N A C K >
H e a d e rSOH (01h): S ta r t Of Header
'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Ind icat e a r eplying Monitor ID.
Ex. ) When t h is byte is set t o 'A ', the replying Monitor ID is '1' .Wh en t his byt e is set to '*' (2Ah), th e rep lying Monitor ID is 'ALL'.
'D ' (44h): Message Type is "Get par am eter reply"'1 '- '2 ' (31h , 32h): Mess age len gth is 18 bytes
Hea der Message Check code Delimiter
SO H -'0'-'0'-Monit or ID -'D'-'1'-'2' ST X-'0'-'1'-'0'-'0'-'9'-'2'-'0'-'0'
-'F'-'F'-'F'-'F'-'0'-'0'-'0'-'0'-ETX
BCC CR
un supp orted OP code pagean d OP code
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 91/94
- 91 -
Mes s age
STX (02h) : S tar t of Message'0 '- '1 ' (30h, 30h ): Resu lt code. 01 : Un sup port ed'0 '- '0 ' (30h , 30h): Oper at ion code page n um ber is 0'9 '- '2 ' (39h , 32h): Oper at ion code is 92h (in t he p age 0)'0' -'0 ' (30h, 30h) : This opera t ion is "Set pa ra met er" type
'F '-'F '-'F '-'F ' (46h, 46h , 46h, 46h): Black Leve l ma x value is 65535(F FF Fh )'0 '- '0 ' -'0 ' -'0 ' (30h, 30h, 30h, 30h ): Cu rr en t Br ight nes s sett ing is 0(0000h)ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
sam e as received OP code pa gean d OP code
type is 00 fixed
max value is F FFF h fixedsettin is 0000h fixed
result code is 01 fixed
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 92/94
- 92 -
ex 2. unsupported Para meter (Set Pa ram eter is “128d (80h)”)
<from PC t o monitor>
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved
Monitor ID: Specify the Monitor ID of which you wan t to chan ge a set t ing.E x.) If Mon itor I D is '1', specify 'A'.
If Monit or ID is 'ALL ', specify '*' (2Ah).'0 ' (30h): Message sender is the controller'E ' (45h): Message Type is "Set pa ra met er comm an d"'0 '- 'A' (30h, 41h): Messa ge lengt h is 10 bytes
Mes s ageSTX (02h) : S tar t of Message'0 '- '0 ' (30h , 30h): Oper at ion code page n um ber is 0'1 '- '0 ' (31h , 30h): Oper at ion code is 10h (in t he p age 0)
'0 '- '0 ' -'8 ' -'0 ' (30h, 30h, 35h , 30h): Set Br ight nes s set tin g 128(0080h)ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
Delimiter
CR (0Dh): En d of packet
< from m onitor to PC : N A C K >
H e a d e rSOH (01h): S ta r t Of Header'0 ' (30h): Reser ved'0 ' (30h): Messa ge receiver is th e cont rollerMonitor ID: Ind icat e a r eplying Monitor ID.
Ex. ) When t h is byte is set t o 'A ', the replying Monitor ID is '1' .Whe n t his byte is set to '*' (2Ah), th e replyin g Monitor ID is 'ALL'.
'F ' (46h): Message Type is "Set pa ra met er re ply"'1 '- '2 ' (31h , 32h): Mess age len gth is 18 bytes
Header Mes s ageCheck
codeDelimiter
SOH -'0'-Mon itor ID-'0'- 'E'- '0'-'A' STX-'0'-'0'-'1'-'0'-'0'-'0'-'8'-'0'-ETX BCC CR
Header Mes s ageCheck
codeDelimiter
SO H -'0'-'0'- Mon it or ID -'F'-'1'-'2' ST X-'0'-'0'-'0'-'0'-'1'-'0'-'0'-'0'-'0'-'0'-'6'-'4'-'0'-'0'-'5'-'0'-ETX
BCC CR
unsupported Pa rameter
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 93/94
- 93 -
Mes s age
STX (02h) : S tar t of Message'0 '- '1 ' (30h, 30h ): Resu lt code. 01 : Un sup port ed'0 '- '0 ' (30h , 30h): Oper at ion code page n um ber is 0'1 '- '0 ' (31h , 30h): Oper at ion code is 10h (in t he p age 0)'0' -'0 ' (30h, 30h) : This opera t ion is "Set pa ra met er" type
'F '- 'F ' - 'F ' -'F ' (46h, 46h, 46h , 46h) : Br ightness ma x value is 65535(FF FF h)'0 '- '0 ' -'0 ' -'0 ' (30h, 30h, 30h , 30h): Received a B righ tn ess set tin g was 0(0000h )ETX (03h) : En d of Message
Che ck codeBCC: Block Ch eck Code
Refer t o the section 4-2)-(3) “Ch eck code ” for a BCC calculat ion.
DelimiterCR (0Dh): En d of packet
type is 00 fixed
max value is FFF Fh fixedsett in is 0000h fixed
res ult code is 01 fixed
8/3/2019 External Control Manual XPseries En
http://slidepdf.com/reader/full/external-control-manual-xpseries-en 94/94
[The chan ging item r ecord]
Ver 1.0.0 22.Sep.2007
Ver 1.0.1 30.J an .2008 Adds 5-1)-(4) Input Source read
Adds 5-1)-(9) Present Time write and 5-1)-(10) Present Time read
Adds 5-1)-(11) Pr ogram Timer wr ite and 5-1)-(12) Program Timer read
Adds 5-1)-(13) Repeat Tim er wr ite and 5-1)-(14) Repea t Tim er r ead
Adds 5-1)-(15) Frequen cy dat a r eading
Adds 5-1)-(16) Remocon Code Control
Increase many data in 5-2)-(1) Menu Opera tion Comma nds
Cha nge t he p ower on/off int erval t ime from 1 min. t o 6 sec.
in 5-1)-(1) Power ON / Power OF F
Ver 1.0.2 27.Feb.2008 Chan ge th e mistyping of 5-1)-(16) Remocon Code Control
from ‘A’ (45h) to ‘A’ (41h).
Adds th e Para meter of “INPUT DETECT” command
in 5-2)-(1) Menu Opera tion Comma nds
Cha nge th e OP code page, OP code an d Pa ra meter of “RS232C
CONTROL” comman d in 5-2)-(1) Menu Operat ion Comm an ds
Adds “PIP Inpu t switch change” command
in 5-2)-(1) Menu Operat ion Comma nds
Adds Notes 1), 2) an d 3) for 5-2)-(1) Menu Operat ion Comm an ds