60"LONG

46"TALL 46"

TALL

44"WIDE

HOPKINS, MI

HOPKINS, MICHIGAN 49328

SIGNED DATE

NOT APPROVED COMMENTS

APPROVED AS MARKED

APPROVED AS SHOWN

PRINT APPROVAL REQUEST

SP INDUSTRIES

49"PIT

24" 41'-4-11/16" REF.

63-1/2"

39-5/8" 42"

86-1/2" 4"

90-1/2"

6"REINFORCEDCONCRETE

82-7/16"SWING OUT

9'-8"MIN.

HEIGHT

37"

TYP. 40 CU. YD. COMPACTION CONTAINERFORCE RATING MUST MEET OR EXCEED 85,000#

REAR-LOAD HOPPER

ROLO-4000-48

CP-4101-HD

CUT LEGS DOWN TO MATCH PIT HEIGHT

PINNING TUNNEL

84"DECK 71-1/4" 47"

60"

90-1/2"

79-3/4"

17'-6"PIT DEPTH 8" 22'-10"

120"PIT

WIDTH

THRU-WALL BINDERS(BOTH SIDES)

CENTERING GUIDE ISLAND

PIT DECK CLOSURE PANELS(BY OTHERS)

7'-0" WIDE 10,000# CAPACITY DECKw/ 24" EXTENSION

POWER UNIT(OPTIONAL LOCATION)

DISCONNECTBY OTHERS

CONTROLS

PINNING CONTROLS(MOUNTED OUTSIDE)

47"

120"DOOR & PITOPENING

49"PIT

47"

120"DOOR

OPENING

OPENINGCLOSURE PANELS

DISCONNECTBY OTHERS

POWER UNIT(OPTIONAL LOCATION)

*CUSTOMER'S CARTFOR ACCURATE BUILD OF DUMPERPLEASE SHIP CARTS TO SP-INDUSTRIES ORPROVIDE ACCURATE AND DETAILED DRAWINGSOF CARTS.

TABLE 1 DISCONNECT & VARIABLE COMPONENTSCOMPONENT VALUES MARKED WITH ASTERISK *) ARE RECOMMENDED

VALUES ONLY FOR A 20HP & 10HP MOTOR. INSTALLING CONTRACTOR MUST CONSULT ALL LOCAL CODES FOR CONFORMITY.

VOLTAGE 3 -VAC

FULL LOAD MTR. CURRENT- AMP

SIZE OF *) DISCONNECT

SIZE OF *) FUSES (AMP)

RECOMM. *) WIRE SIZE

208 90.2 200 125.0 2230 82.0 100 100.0 3460 41.0 60 50.0 8

PROPOSED THRU-WALL INSTALLATION OF A CP-4101-HD WITH REAR-LOAD HOPPER FED BY A ROLO-4000-48 DUMPING CUSTOMER'S CART

TITLE:TOLERANCESFRAC. 1/16.XX .015.XXX .005

CHECKED BY:

JOB NO:

REV:

SYM. CHANGE OR REVISION DATE BY

#

THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SP INDUSTRIES, INC. AND EMBODIES A CONFIDENTIAL PROPRIETARY DESIGN.SP INDUSTRIES INC. RESERVES ALL PROPRIETARY RIGHTS IN THIS DRAWING AND IN THE SUBJECT MATERIAL AND INVENTIONS DISCLOSEDTHEREIN, INCLUDING THE EXCLUSIVE RIGHT TO USE THE DRAWING FOR ALL PURPOSES. THIS DRAWING IS SUBMITTED UNDER ACONFIDENTIAL RELATIONSHIP FOR A SPECIFIC PURPOSE, AND THE RECIPIENT AGREES, BY ACCEPTING THIS DRAWING TO, NOT TOALLOW THIS DRAWING TO BE REPRODUCED OR TO SUPPLY OR DISCLOSE ANY INFORMATION REGARDING THIS DRAWING OR THESUBJECT MATTER THEREOF TO ANY OTHER PERSON WITHOUT THE EXPRESS WRITTEN CONSENT OF SP INDUSTRIES, INC.

1 OF 3

USED ON:SALES PROPOSAL

BUILD:CP-4101-HD

SHEET:WEIGHT:

TEMPLATE SIZE:D

C. JOHNSONDRAWN: DATE:

11/17/2017

1:30SCALE:

DP-27477DRAWING NO:

60"LONG

46"TALL 46"

TALL

44"WIDE

HOPKINS, MI

HOPKINS, MICHIGAN 49328

SIGNED DATE

NOT APPROVED COMMENTS

APPROVED AS MARKED

APPROVED AS SHOWN

PRINT APPROVAL REQUEST

SP INDUSTRIES

49"PIT

24" 41'-4-11/16" REF.

39-5/8" 42"

86-1/2" 4" 90-1/2"

6"REINFORCEDCONCRETE

82-7/16"SWING OUT

9'-8"MIN.

HEIGHT

37"

TYP. 40 CU. YD. COMPACTION CONTAINERFORCE RATING MUST MEET OR EXCEED 85,000#

REAR-LOAD HOPPER

ROLO-4000-48

CP-4101-HD

CUT LEGS DOWN TO MATCH PIT HEIGHT

PINNING TUNNEL

84"DECK 71-1/4"

17'-6"PIT DEPTH 8" 22'-10"

120"PIT

WIDTH

THRU-WALL BINDERS(BOTH SIDES)

CENTERING GUIDE ISLAND

PIT DECK CLOSURE PANELS(BY OTHERS)

7'-0" WIDE 10,000# CAPACITY DECKw/ 24" EXTENSION

POWER UNIT(OPTIONAL LOCATION)

DISCONNECTBY OTHERS

CONTROLS

PINNING CONTROLS(MOUNTED OUTSIDE)

47"

120"DOOR & PITOPENING

49"PIT

47"

120"DOOR

OPENING

OPENINGCLOSURE PANELS

DISCONNECTBY OTHERS

POWER UNIT(OPTIONAL LOCATION)

*CUSTOMER'S CARTFOR ACCURATE BUILD OF DUMPERPLEASE SHIP CARTS TO SP-INDUSTRIES ORPROVIDE ACCURATE AND DETAILED DRAWINGSOF CARTS.

TABLE 1 DISCONNECT & VARIABLE COMPONENTSCOMPONENT VALUES MARKED WITH ASTERISK *) ARE RECOMMENDED

VALUES ONLY FOR A 20HP & 10HP MOTOR. INSTALLING CONTRACTOR MUST CONSULT ALL LOCAL CODES FOR CONFORMITY.

VOLTAGE 3 -VAC

FULL LOAD MTR. CURRENT- AMP

SIZE OF *) DISCONNECT

SIZE OF *) FUSES (AMP)

RECOMM. *) WIRE SIZE

208 90.2 200 125.0 2230 82.0 100 100.0 3460 41.0 60 50.0 8

PROPOSED THRU-WALL INSTALLATION OF A CP-4101-HD WITH REAR-LOAD HOPPER FED BY A ROLO-4000-48 DUMPING CUSTOMER'S CART

TITLE:TOLERANCESFRAC. 1/16.XX .015.XXX .005

CHECKED BY:

JOB NO:

REV:

SYM. CHANGE OR REVISION DATE BY

#

THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SP INDUSTRIES, INC. AND EMBODIES A CONFIDENTIAL PROPRIETARY DESIGN.SP INDUSTRIES INC. RESERVES ALL PROPRIETARY RIGHTS IN THIS DRAWING AND IN THE SUBJECT MATERIAL AND INVENTIONS DISCLOSEDTHEREIN, INCLUDING THE EXCLUSIVE RIGHT TO USE THE DRAWING FOR ALL PURPOSES. THIS DRAWING IS SUBMITTED UNDER ACONFIDENTIAL RELATIONSHIP FOR A SPECIFIC PURPOSE, AND THE RECIPIENT AGREES, BY ACCEPTING THIS DRAWING TO, NOT TOALLOW THIS DRAWING TO BE REPRODUCED OR TO SUPPLY OR DISCLOSE ANY INFORMATION REGARDING THIS DRAWING OR THESUBJECT MATTER THEREOF TO ANY OTHER PERSON WITHOUT THE EXPRESS WRITTEN CONSENT OF SP INDUSTRIES, INC.

2 OF 3

USED ON:SALES PROPOSAL

BUILD:CP-4101-HD

SHEET:WEIGHT:

TEMPLATE SIZE:D

C. JOHNSONDRAWN: DATE:

11/17/2017

1:30SCALE:

DP-27477DRAWING NO:

60"LONG

46"TALL 46"

TALL

44"WIDE

HOPKINS, MI

HOPKINS, MICHIGAN 49328

SIGNED DATE

NOT APPROVED COMMENTS

APPROVED AS MARKED

APPROVED AS SHOWN

PRINT APPROVAL REQUEST

SP INDUSTRIES

*CUSTOMER'S CARTFOR ACCURATE BUILD OF DUMPERPLEASE SHIP CARTS TO SP-INDUSTRIES ORPROVIDE ACCURATE AND DETAILED DRAWINGSOF CARTS.

TABLE 1 DISCONNECT & VARIABLE COMPONENTSCOMPONENT VALUES MARKED WITH ASTERISK *) ARE RECOMMENDED

VALUES ONLY FOR A 20HP & 10HP MOTOR. INSTALLING CONTRACTOR MUST CONSULT ALL LOCAL CODES FOR CONFORMITY.

VOLTAGE 3 -VAC

FULL LOAD MTR. CURRENT- AMP

SIZE OF *) DISCONNECT

SIZE OF *) FUSES (AMP)

RECOMM. *) WIRE SIZE

208 90.2 200 125.0 2230 82.0 100 100.0 3460 41.0 60 50.0 8

PROPOSED THRU-WALL INSTALLATION OF A CP-4101-HD WITH REAR-LOAD HOPPER FED BY A ROLO-4000-48 DUMPING CUSTOMER'S CART

TITLE:TOLERANCESFRAC. 1/16.XX .015.XXX .005

CHECKED BY:

JOB NO:

REV:

SYM. CHANGE OR REVISION DATE BY

#

THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SP INDUSTRIES, INC. AND EMBODIES A CONFIDENTIAL PROPRIETARY DESIGN.SP INDUSTRIES INC. RESERVES ALL PROPRIETARY RIGHTS IN THIS DRAWING AND IN THE SUBJECT MATERIAL AND INVENTIONS DISCLOSEDTHEREIN, INCLUDING THE EXCLUSIVE RIGHT TO USE THE DRAWING FOR ALL PURPOSES. THIS DRAWING IS SUBMITTED UNDER ACONFIDENTIAL RELATIONSHIP FOR A SPECIFIC PURPOSE, AND THE RECIPIENT AGREES, BY ACCEPTING THIS DRAWING TO, NOT TOALLOW THIS DRAWING TO BE REPRODUCED OR TO SUPPLY OR DISCLOSE ANY INFORMATION REGARDING THIS DRAWING OR THESUBJECT MATTER THEREOF TO ANY OTHER PERSON WITHOUT THE EXPRESS WRITTEN CONSENT OF SP INDUSTRIES, INC.

3 OF 3

USED ON:SALES PROPOSAL

BUILD:CP-4101-HD

SHEET:WEIGHT:

TEMPLATE SIZE:D

C. JOHNSONDRAWN: DATE:

11/17/2017

1:30SCALE:

DP-27477DRAWING NO: