DO00150 - POINT OF USE LIQUID WATER (CONDENSATE) REMOVEREXCEPTIONAL COMPRESSED AIR QUALITY GUARANTEED
All the protection you need in one device instead of having to purchase and maintain a multiplicity of different products.
Save money, save energy, save time.
Page 1 of 3
For additional benefits we recommend you fit a Dropout® Auto-drain. Please see our website or contact us for further information.
Dropout® will dramatically improve compressed air systems throughout the industry. The unique design allows it to efficiently remove >99.9999% of liquid water and remove other contaminants down to 3 micron.
DO00150PRODUCT OVERVIEW
FEATURES● ISO 12500 - Part 3 & 4 ● >99.9999% Liquid water removal
efficiency● No consumables ● No increase in pressure drop
caused by blocked filters● No mains power● Significantly lower life cycle costs● Easy to install● Instantaneous recovery from
pulsed flows or stop start● Virtually maintenance free
COMPACTThe DO00150 is a 'Compact' Dropout® unit and is used as an in-line point of use liquid water separator and contaminant remover. It is used in a wide range of applications and flow rates:
● Superior protection for your application at point of use
● Stand-alone replacement for water separators and/or coalescing filters
● Protection upstream of refrigerant & desiccant dryers
Unlike traditional cyclonic separators which rely on constant and stable flows, Dropout® has the ability to maintain its performance levels during start up where it reaches optimum performance in a fraction of a second.
● 4 cfm rated flow rate *See technical data on pages 2 & 3
● 15 bar(g) maximum pressure● 1/4" BSPT/NPT inlet/outlet connection● 1 micron particulate removal ● Stainless grade 304 or 316
...see pages 2 & 3 for detailed product specification
>99.9999% LIQUID WATER REMOVAL
33 67 100 133 167
99.0%99.1%99.2%99.3%99.4%99.5%99.6%99.7%99.8%99.9%
100.0%
1 2 4 5 6
Flow Rate (litre/min)
Liqu
id W
ater
Rem
oval
Effi
cien
cy %
Flow Rate (cfm)
Line Drawing for Mounting*Product Line Drawing*
Page 2 of 3
TECHNICAL DATA
Correction Factors
Line Pressure (psig) 14.5 29.0 43.5 58.0 72.5 87.0 101.5 116.0 130.5 145.0 159.5 174.0 188.5 203.1 217.6
Line Pressure (barg) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Correction Factor 0.53 0.63 0.73 0.79 0.87 0.94 1.00 1.09 1.17 1.25 1.33 1.40 1.48 1.56 1.64
Mechanical SpecificationProduct code DO00150
Water storage 200 cc
Inlet/Outlet connection 1/4" BSPT
Drain connection 1/2" (m) BSPT
Weight 1.16 kg
Product dimensions 220 mm x 48.5 mm Ø
Particulate removal 3 micron
Material (housing) Stainless Grade 304
Material (internal) ABS
25 mm 15.5 mmØ 56 mm
Ø 48.5 mm
33 m
m
220
mm
Ø 56 mm
28 m
m
Screws M5 x 6 mm
Box Contents QTYDO00150 Unit 1
Manual drain valve 1
Mounting bracket 1
Screws M5 x 6 mm 4
Bolts 4
Manual 1
Auto-drains available contact us or visit our website*Not to scale
*Not to scale
Operational Specification
Operating pressure1 - 15 bar(g)
15 - 217 psi(g)
Operating temperature>0 to +80 ⁰C
>32 to 176 ⁰F
35 ⁰C
95 ⁰F
Flow rate for a 7 bar(g) systemmin - max | (rated)
0.06 - 15 m³/hr | (8.5)
0.04 - 8.8 cfm | (4)
1 - 250 litre/min | (142)
Maximum recommended inlet temperature
9 mm
Page 3 of 3
PRESSURE DROP (at 7 barg)
0 57 113 170 227 283 340 396
0.00
1.45
2.90
4.35
5.80
7.25
8.70
0.00
0.10
0.20
0.30
0.40
0.50
0.60
0 2 4 6 8 10 12 14
Flow Rate (litre/min)
Pres
sure
Dro
p (b
ar)
Flow Rate (cfm)
DO00060 DO00150 (current) DO00300
Recommended
