DO00150 - POINT OF USE LIQUID WATER (CONDENSATE) REMOVEREXCEPTIONAL COMPRESSED AIR QUALITY GUARANTEED

All the protection you need in one device instead of having to purchase and maintain a multiplicity of different products.

Save money, save energy, save time.

Page 1 of 3

For additional benefits we recommend you fit a Dropout® Auto-drain. Please see our website or contact us for further information.

Dropout® will dramatically improve compressed air systems throughout the industry. The unique design allows it to efficiently remove >99.9999% of liquid water and remove other contaminants down to 3 micron.

DO00150PRODUCT OVERVIEW

FEATURES● ISO 12500 - Part 3 & 4 ● >99.9999% Liquid water removal

efficiency● No consumables ● No increase in pressure drop

caused by blocked filters● No mains power● Significantly lower life cycle costs● Easy to install● Instantaneous recovery from

pulsed flows or stop start● Virtually maintenance free

COMPACTThe DO00150 is a 'Compact' Dropout® unit and is used as an in-line point of use liquid water separator and contaminant remover. It is used in a wide range of applications and flow rates:

● Superior protection for your application at point of use

● Stand-alone replacement for water separators and/or coalescing filters

● Protection upstream of refrigerant & desiccant dryers

Unlike traditional cyclonic separators which rely on constant and stable flows, Dropout® has the ability to maintain its performance levels during start up where it reaches optimum performance in a fraction of a second.

● 4 cfm rated flow rate *See technical data on pages 2 & 3

● 15 bar(g) maximum pressure● 1/4" BSPT/NPT inlet/outlet connection● 1 micron particulate removal ● Stainless grade 304 or 316

...see pages 2 & 3 for detailed product specification

>99.9999% LIQUID WATER REMOVAL

33 67 100 133 167

99.0%99.1%99.2%99.3%99.4%99.5%99.6%99.7%99.8%99.9%

100.0%

1 2 4 5 6

Flow Rate (litre/min)

Liqu

id W

ater

Rem

oval

Effi

cien

cy %

Flow Rate (cfm)

Line Drawing for Mounting*Product Line Drawing*

Page 2 of 3

TECHNICAL DATA

Correction Factors

Line Pressure (psig) 14.5 29.0 43.5 58.0 72.5 87.0 101.5 116.0 130.5 145.0 159.5 174.0 188.5 203.1 217.6

Line Pressure (barg) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Correction Factor 0.53 0.63 0.73 0.79 0.87 0.94 1.00 1.09 1.17 1.25 1.33 1.40 1.48 1.56 1.64

Mechanical SpecificationProduct code DO00150

Water storage 200 cc

Inlet/Outlet connection 1/4" BSPT

Drain connection 1/2" (m) BSPT

Weight 1.16 kg

Product dimensions 220 mm x 48.5 mm Ø

Particulate removal 3 micron

Material (housing) Stainless Grade 304

Material (internal) ABS

25 mm 15.5 mmØ 56 mm

Ø 48.5 mm

33 m

m

220

mm

Ø 56 mm

28 m

m

Screws M5 x 6 mm

Box Contents QTYDO00150 Unit 1

Manual drain valve 1

Mounting bracket 1

Screws M5 x 6 mm 4

Bolts 4

Manual 1

Auto-drains available contact us or visit our website*Not to scale

*Not to scale

Operational Specification

Operating pressure1 - 15 bar(g)

15 - 217 psi(g)

Operating temperature>0 to +80 ⁰C

>32 to 176 ⁰F

35 ⁰C

95 ⁰F

Flow rate for a 7 bar(g) systemmin - max | (rated)

0.06 - 15 m³/hr | (8.5)

0.04 - 8.8 cfm | (4)

1 - 250 litre/min | (142)

Maximum recommended inlet temperature

9 mm

Page 3 of 3

PRESSURE DROP (at 7 barg)

0 57 113 170 227 283 340 396

0.00

1.45

2.90

4.35

5.80

7.25

8.70

0.00

0.10

0.20

0.30

0.40

0.50

0.60

0 2 4 6 8 10 12 14

Flow Rate (litre/min)

Pres

sure

Dro

p (b

ar)

Flow Rate (cfm)

DO00060 DO00150 (current) DO00300