TITLE IN ALL CAPS
A graduation project submitted to
the Faculty of Engineering and Natural Sciences of
International University of Sarajevo in partial
fulfillment of the requirements for the degree of
Bachelor of Science
in PROGRAMME NAME
by
Your Name
Graduation Date
1
Graduation project written by
NAME
Graduation Committee
Prof. Dr. Affiliation, Country, ChairProf. Dr. Affiliation, Country, SupervisorProf. Dr. Affiliation, CountryProf. Dr. Affiliation, CountryProf. Dr. Affiliation, CountryProf. Dr. Affiliation, CountryProf. Dr. Affiliation, Country
2
I hereby declare that all information in this document has been obtained and presented in
accordance with academic rules and ethical conduct. I also declare that, as required by these
rules and conduct, I have fully cited and referenced all material and results that are not
original to this work.
NAME LAST NAME
iii
INTERNATIONAL UNIVERSITY OF SARAJEVO
DECLARATION OF COPYRIGHT AND AFFIRMATION
OF FAIR USE OF UNPUBLISHED WORK
Copyright 2017 © by Student Name Last name rights reserved.
GRADUATION PROJECT TITLE
No part of this unpublished work may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording or otherwise without prior written permission of the copyright holder and
IUS Library.
Affirmed by Student NAME
Signature Date
iv
ABSTRACT
v
DEDICATION
Optional dedication page.
vi
TABLE OF CONTENTS
LIST OF FIGURES........................................................................................................IX
LIST OF TABLES............................................................................................................X
LIST OF ABBREVIATIONS.........................................................................................XI
ACKNOWLEDGEMENTS.........................................................................................XIII
CHAPTER 1.....................................................................................................................14
1.1 Abstracts...................................................................................................................14
1.2 Introduction..............................................................................................................14
1.3 How to Use this template.........................................................................................14
1.4 Cross-References.....................................................................................................14
1.5 References and Bibliography...................................................................................15
CHAPTER 2.....................................................................................................................16
2.1 Style Guide and Instructions for Thesis and Dissertation........................................16
2.1.1 Font Styles.....................................................................................................16
2.1.2 Margins..........................................................................................................16
2.1.3 Figures............................................................................................................16
2.1.4 Tables............................................................................................................18
2.2 Bibliographies/References.......................................................................................19
2.3 Footnotes..................................................................................................................19
2.4 Appendices...............................................................................................................19
APPENDIX A EXAMPLE OF AN APPENDIX...........................................................21
APPENDIX B ANOTHER APPENDIX EXAMPLE...................................................22
REFERENCES................................................................................................................23
vii
LIST OF FIGURES
Figure 2.1. An Example figure..........................................................................................17
viii
LIST OF TABLES
Table 2.1. An Example table. Chapter Number and Table Number within chapter..........17
Table 2.2. Another table....................................................................................................18
ix
LIST OF ABBREVIATIONS
BDS Bidirectional Similarity
DRIM Dynamic Range Independent Metric
EV Exposure Value
HDR High Dynamic Range
x
xi
ACKNOWLEDGEMENTS
Acknowledge those who helped or supported you in finishing this dissertation/thesis.
Your Name
Defense Date, City, State
xii
CHAPTER 1
1.1 Abstracts
This is external to the thesis and not counted in the page count. There is another
template for the abstract – see ThesisAbstract-Template.dot.
Added Note: Abstract is not part of thesis and must not be paginated and must not
affect the page count of thesis or front matter.
1.2 Introduction
1.3 How to Use this template
You can open this document Thesis Dissertation-Tempate.dot and do a “save as”. Or
you can put this .dot file in your templates folder for MS Word and do a “New…” and
select this template.
MS Word allows you to define styles. For example this text is “Body Text”. You
should use the “Styles and Formatting” tool bar for changing and applying styles to
your text. Select the text and apply the appropriate style. The chapter heading is
Heading 1 and the sub section is Heading 2 and Heading 3 for sub-subsections.
1.4 Cross-References
Word allows you to automatically generate the Table of Contents and List of
Figures/Tables via the “Insert Reference Index and Table” function. If you use the
styles properly for each heading and captions this tool will save a large amount of
time.
13
14
1.5 References and Bibliography
Use EndNote or some other plugin tool to manage your references and insert your
citations. These tools automatically generate your bibliography and will save you
100’s of hours. The references in this document are done with EndNote.
15
CHAPTER 2
2.1 Style Guide and Instructions for Thesis and Dissertation
2.1.1 Font Styles
Scalable fonts (E.g. Arial, Times New Roman) should be 12 points in size. Do not use
exotic fonts (slanted, square, or script type) for the entire document, but special fonts
may be used for emphasis or when otherwise appropriate. Students should make sure
that the print is uniformly letter quality. Laser print, ink jet print, or high-quality
photocopying is acceptable. Dot matrix or near letter quality print is not acceptable.
The type style and size must be the same throughout the thesis or dissertation.
Added note: The font size and style (e.g., New Times Roman) must be same
throughout the thesis, table of content (TOC), and abstract. Different/variable size
and style is not allowed for chapter headings or any other titles. However, titles can
be bold, italics, etc.
2.1.2 Margins
On all sides use standard one inch margin. Illustrations, graphs, and tables must not
extend beyond the margins. Materials that extend beyond these margins should be
retyped or reduced in size.
2.1.3 Figures
Word allows you to insert a caption (figure or table). This is down with “Insert
Reference Caption”. More importantly Word also has facilities to reference these
figures. Use “Insert Reference Cross-Reference” to insert a reference to a figure,
16
table, or heading. This is really helpful when you (because you will) rearrange
sections or placement of figures/tables. Word will keep track of this for you if you use
the cross reference tool.
Additionally, by using the insert-caption you can automatically generate a list of
figures and a list of tables. If the location of table/figure moves, you just regenerate
the list and it is updated.
17
Figure 2.1. An Example figure.
2.1.4 Tables
Again, make sure tables are consistent and neat. Table heading go before the table.
We have two examples of tables below Table 2.1 and Table 2.2. Notice they are
numbered with the chapter, that is table 1 of chapter 2 (2.1).
Table 2.1. An Example table. Chapter Number and Table Number within chapter
18
Document Engineering Software Engineering
Viewing/Editing
Linking/Querying
Software Visualization
Static Analysis
Plain-Text Source Code Medium None None None
AST & Symbol Table Low Low Low Medium
srcML High High High Medium
Table 2.2. Another table.
Prev
ious
Ben
chm
ark
Res
ults Fact Extractor Full Answer Partial Answer No Answer
Acacia 32% 16% 52%
Columbus 19% 11% 70%
Cppx 45% 19% 35%
TkSee/SN 28% 18% 54%
2.2 Bibliographies/References
Make sure that the bibliography is properly and consistently formatted. Use EndNote
or some other plugin tool to manage your references and insert your citations. The
references in this document are done with EndNote.
2.3 Footnotes
A footnote1, this is an example of a footnote and the formatting. Again, everything has
to be in the same font and size. You should use footnote sparingly.
1 This is a footnote. A place to put additional information.
19
2.4 Appendices
Appendices are a good place to put things like source code, DTDs, and extra
mathematical information. They are page numbered. Examples are in this document
as Appendix A and B. Use Appendix Heading for the heading of the appendix.
20
APPENDIX AExample of an Appendix
This appendix contains vital information.
21
APPENDIX BAnother Appendix Example
22
REFERENCES
[Aiken, Ngwenyama, Broome 1999] Aiken, P., Ngwenyama, O., and Broome, L.,
(1999), "Reverse Engineering New Systems for Smooth Implementation", IEEE
Software, vol. 16, no. 2, March/April, pp. 36-43.
[Biggerstaff, Mitbander, Webster 1993] Biggerstaff, T. J., Mitbander, B. G., and
Webster, D., (1993), "The concept assignment problem in program understanding", in
Proceedings of International Conference on Software Engineering (ICSE'93),
Baltimore, Maryland, pp. 482 - 498.
[Bruegge, Dutoit 2000] Bruegge, B. and Dutoit, A.,(2000),Object-Oriented Software
Engineering Conquering Complex and Changing Systems, Prentice Hall.
[Collard 2004] Collard, M. L., (2004), Meta-Differencing: An Infrastructure for
Source Code Difference Analysis, Kent State University, Kent, Ohio USA, Ph.D.
Dissertation Thesis.
[Collard, Kagdi, Maletic 2003] Collard, M. L., Kagdi, H. H., and Maletic, J. I.,
(2003), "An XML-Based Lightweight C++ Fact Extractor", in Proceedings of 11th
IEEE International Workshop on Program Comprehension (IWPC'03), Portland, OR,
May 10-11, pp. 134-143.
[Cordy 2003] Cordy, J. R., (2003), "Generalized Selective XML Markup of Source
Code Using Agile Parsing", in Proceedings of 11th IEEE International Workshop on
Program Comprehension (IWPC'03), Portland, Oregon, USA, May 10 - 11, pp. 134-
143.
23
24
[Faloutsos, Oard 1995] Faloutsos, C. and Oard, D. W., (1995), "A Survey of
Information Retrieval and Filtering Methods": University of Maryland, CS-TR-3514.
[OMG 2003] OMG, (2003), "Unified Modeling Language, 1.5": http://www.omg.org.