Chapter 9
Linear Momentum and Collisions
Consider an isolated system consisting of just two particles. If a force from particle 1 acts on particle 2, then a force of the same magnitude from particle 2 acts on particle 1 (by Newton’s third law).
m1
m2v2
v1
F21
F12
Two isolated particles interacting with each other. Newton’s third law ensures that F12= -F21.
Some math...01221 FF
02211 aa mm
022
11
dt
dm
dt
dm
vv
0)()( 2211
dt
md
dt
md vv
0)( 2211 vv mmdt
d
What can we say about m1v1 + m2v2 if its derivative is zero?
m1v1 + m2v2 is a constant as long as the system remains isolated.
Definition: The linear momentum of a particle or an object that can be modeled as a particle of mass m moving with a velocity v is defined to be the product of the mass and velocity.
vp mWe can write Newton’s second law in terms of momentum.
dt
dm
dt
d
dt
dmm
pv
vaF )(
The time rate of change of the linear momentum of a particle is equal to the net force acting on the particle.
Conservation of momentum
0)( 2211 vv mmdt
d
Therefore, if two (or more) particles in an isolated system interact, the total momentum of the system remains constant. In other words, the total momentum of an isolated system at all times equals its initial momentum.
p1i + p2i = p1f + p2f
pix = pfx
piy = pfy
piz = pfz
Practice Problem: Archery on ice
A 60.0 kg archer stands at rest on frictionless ice and fires a 0.50 kg arrow horizontally at 50 m/s. With what velocity does the archer move across the ice after firing the arrow?
Impulse and momentum
Suppose a single force F acts on a particle. Then we know F = dp/dt, or
dtd Fp which we can integrate to figure out the change in momentum when the force acts over some time interval.
f
i
t
t
dtFpI
The impulse-momentum theorem
The impulse of the force F acting on a particle equals the change in momentum of the particle. Since the force imparting an impulse generally varies with time, we can define impulse in terms of the time-averaged force.
f
i
t
t
dttFF
1 This is the mean value theorem of calculus. t = tf – ti,
tFITherefore,
Often times, we can approximate the force acting on an object as constant, especially if the force acts for a short time. Then, I = Ft. This is called the impulse approximation, in which we assume that one of the forces exerted on a particle acts for a short time but is much greater than any other force present.
Example: The collision of a baseball and the bat. The time of the collision is very short (about 0.01 s) and the average force the bat exerts on the ball is very large (1000s of Newtons). Therefore we are justified in ignoring the gravitational force when analyzing the collision using the impulse-momentum theorem.
Quick QuizTwo objects are at rest on a frictionless surface. Object 1
has a greater mass than object 2. When a constant force is applied to object 1, it accelerates through a distance d. The force is removed from object 1 and applied to object 2. At the moment when object 2 has accelerated through the same distance d, which statements are true?
a) p1 < p2
b) p1 = p2
c) p1 > p2
d) K1 < K2
e) K1 = K2
f) K1 > K2
Quick QuizTwo objects are at rest on a frictionless surface. Object 1
has a greater mass than object 2. When a constant force is applied to object 1, it accelerates for a time interval t. The force is then removed and applied to object 2. After object 2 has accelerated for the same time interval t, which statements are true?
a) p1 < p2
b) p1 = p2
c) p1 > p2
d) K1 < K2
e) K1 = K2
f) K1 > K2
Practice problem
A ball of mass 0.150 kg is dropped from rest from a height of 1.25 m. It rebounds from the floor to reach a height of 0.960 m. What impulse was given to the ball by the floor?
Collisions in one dimension
An elastic collision between two objects is one in which the total kinetic energy as well as total momentum of the system is the same before and after the collision.
An inelastic collision is one in which the total kinetic energy of the system is not the same before and after the collision, even though the total momentum is conserved.
Perfectly inelastic: the objects stick together after the collision
Inelastic: the objects do not stick together
The momentum of the system is conserved in all collisions, but the kinetic energy is conserved only in elastic collisions.
The perfectly inelastic collison
m1m2
v1i v2i
Before Collision
m1 m2
After Collision
vf
fmmmm vvv )( 212211
The perfectly elastic collision
m1m2
v1i v2i Before Collision
m1 m2
v2fv1f
22112211 ffii mmmm vvvv
After Collision
222
211
222
211 2
1
2
1
2
1
2
1ffii vmvmvmvm
(conservation of momentum)
(conservation of energy)
Quick Quiz
In a perfectly inelastic one-dimensional collision between two objects, what condition alone is necessary so that all of the original kinetic energy of the system is gone after the collision?
a) The objects must have momenta with the same magnitude but opposite direction
b) The objects must have the same massc) The objects must have the same velocityd) The objects must have the same speed, with
velocity vectors in opposite directions
The ballistic pendulum can be used to measure the speed of a fast-moving projectile, such as a bullet. A bullet of mass m1 is fired into a large block of wood of mass m2 suspended from some wires. The bullet gets stuck in the block, and the entire system swings through a height h. Find the speed of the bullet in terms of h and the two masses.
Two dimensional collisions
p1i + p2i = p1f + p2f
pix = pfx
piy = pfy
piz = pfz
The key to solving problems involving two dimensional collisions is to realize that the momentum in each
individual direction is conserved.
Practice ProblemAn unstable atomic nucleus of mass 17.0 X 10-27 kg initially at rest disintigrates into three particles. One of the particles, of mass 5.00 X 10-27 kg, moves in the y-direction with a speed of 6.00 X 106 m/s. Another particle of mass 8.40 X 10-27 kg, moves in the x-direction with a speed of 4.00 X 106 m/s.
a)Find the velocity of the third particleb)Find the total kinetic energy increase in the process.
Trickier practice problem
After a completely inelastic collision, two objects of the same mass and same initial speed move away together at half their initial speed. Find the angle between the initial velocities of the objects.
Hint: Choose your x and y directions carefully!
The center of mass
x
y
m1 m2 ... mi mN...
Suppose we have N number of particles of different masses lined up on the x-axis as shown. We define the center of mass as
M
xm
mmm
xmxmxmx
N
iii
N
NNcm
1
21
2211
...
...
where M is the total mass of the system of particles. This can easily be extended to 2-D and 3-D by computing ycm and zcm.
Practice Problem
-3 -2 -1 0 1 2 3 4 5 6 7 8
-4
-2
0
2
4
6
8
Find the center of mass of the three particles shown in the figure:
p1 = (3.0, 2.0), m1 = 6.0 kg
p2 = (4.0, -4.0), m2 = 2.0 kg
p3 = (-2.0, 7.0), m3 = 4.0 kg
Example: Earth-moon barycenterFind the center of mass of the Earth-moon system.
ME= 5.98 X 1024 kg, MM = 7.36 X 1022 kg, and their centers are 3.84 X 105 km apart. This point is called the barycenter and the motion of the Earth and moon around it has important consequences for studying phenomena such as tides.
SymmetrySymmetry can make calculating the center
of mass a whole lot easier.
(x1,y1)
(x2,y2)
(x3,y3)
(-x3,-y3)
(-x2,-y2)
(-x1,-y1)
Consider 6 particles all of mass m arranged in a circle. Symmetry ensures that everything cancels out if we choose the origin at the center of the circle. The center of mass is at the center of the circle.
Motion of the center of mass
In general, i
iicm mM
rr 1
Where, kjir ˆˆˆcmcmcmcm zyx
is the displacement vector of the center of mass.
By differentiating we can determine the velocity and acceleration of the center of mass.
i
iicm mM
vv 1
iiicm m
Maa 1
Notice that these are vector equations, which means we can break them up into components.
Suppose Fi is the sum of all the forces acting on the ith particle in our system. Then, by Newton’s second law, Fi = miai.
)...(11
21 Ni
iicm Mm
MFFFaa
NcmM FFFa
...21
Remember, each F is the sum of all the forces acting on that particular particle (1, 2, ..., N).
Now, we do something clever. We will break up the sum of the forces on each particle into the sum of the external forces on that particle, Fi
E, and the forces exerted by the other particles in the system. For instance,
NE
1131211 ...FFFFF
So we can write...
)...(
...)...(...
)1(21
112121
NNNNEN
NE
NcmM
FFFF
FFFFFFa
And since we’re dealing with a sum we can rearrange like so...
)(...)()()...( )1()1(3113211221 NNNNEN
EEcmM FFFFFFFFFa
I believe my third law of motion can help simplify things here.
ExternalEN
EEcmM FFFFa
...21
The center of mass of a system of particles acts as if it were a particle of mass M moving under the influence of just the external forces on the system. This is true in all cases. The particles could be a blob of silly putty, a gas, or a rigid body. It can be anything!
Example: Two colliding asteroidsTwo asteroids are initially at rest relative to each other. Due to gravitational attraction, they eventually collide. If external forces are negligible, where do the asteroids collide?
d = 1.0 X 107 m
M1 = 8.0 X 1010 kg M2 = 2.0 X 1010 kg
Example: The exploding rocket
A rocket is fired vertically upward. At the instant it reaches an altitude of 1000 m and a speed of 300 m/s, it explodes into three fragments having equal mass. One fragment continues to move upward with a speed of 450 m/s. The second fragment has a speed of 240 m/s and is moving east right after the explosion. What is the velocity of the third fragment right after the explosion?
Example: a proton-proton collisionA proton collides elastically with another proton that is initially at rest.
The incoming proton has an initial speed of 3.50 X 105 m/s and makes a glancing collision with the second proton*. After the collision, one proton moves off at an angle of 370 to the original direction of motion, and the second deflects at an angle of to the same axis. Find the final speeds of the two protons and the angle .
v1i = 3.50 X 105 m/s370
v1f
v2f
Before After
* The two protons do not actually come into direct contact with one another. They interact through a repulsive electric force.