CARES® Integrated Digital Solutions
CARES® In-Lab Milling
Product Information
Data Acquisition Planning Surgery Impression Design Production
Post Processing
Final Restoration
CARES® M series
CARES® D series
CARES® M series – wet, wet/dry and dry-milling in a single system
The CARES® M series milling and grinding system enables dental laboratories to produce an extensive range of restorations for every type of indication.
It can handle a wide range of materials. Allowing your lab to produce a broad range of prosthetics, from inlays, onlays, veneers, and single crowns, to bridges and screw-retained restorations. Prosthetics can be milled or ground in wet or dry modes from materials, including glass ceramic, zirconia, PMMA, cobalt-chromium sinter metal, wax, lithium disilicate ceramics and resin nano-ceramic.
The CARES® M series is a single system that can handle the majority of your casework. With
multiple workflow options, you can enjoy the full flexibility of using one system regardless of what case appears from your customer. For work peaks or complex cases, our centralized milling facility operates as an extension of your lab.
ѹ Maximum range of materials and indications thanks to 5-axis wet and dry processing in one unit
ѹ Innovative processing procedures ensure maximum value creation (e.g. rotational milling of titanium, processing of full dentures)
ѹ Intelligent machine design guarantees optimum protection of all electronic components during wet operation
Super high frequency spindlehighly precise, stable, quiet running
Blank holderexchangeable, depend-ing on material or indi-cation
Tool length measuring unitincludes fracture check and calibration
Suction bagfor increased suction performance and reduced spray water
6 tool spaceswith automatic tool changer
Blank holder and wet/dry processing mode in only a few steps Coolant supply tank
connectionlarge volume capacity ensures long operating cycles
Straumann® CARES® Integrated Digital Solutions2
CARES® M series
Produce premium restorations using high-performance materials from Straumann® and other leading suppliers. Straumann® CARES® Lab offers a range of CADCAM materials, with disks to meet your specific needs.
*Not cleared for Ti-Base resotrations for in-lab milling.
Indications M series
Crowns/bridges fully anatomical/anatomically reduced xInlay/Onlay xVeneer xOverpress fully anatomical xTelescope crown xAttachment xCustom titanium abutment xBridge on conical titanium bases xMulti-unit, screw-retained restorations on titanium bases xBar on titanium base xDigital model fabrication x
Material Material Type Processing Dry ~ / Wet S
M seriesDry/Wet
Straumann® n!ce® Lithium silicate ceramic S x
Zirconia Zirconia ~ x
Wax* Milling wax S ~ x
PMMA* Acrylic, transparent S ~ x
TEMP* Acrylic, PMMA S ~ x
Splintec* Acrylic splints, PMMA S ~ x
JUVORA™ PEEK* Polymer resin S ~ x
Ti-Forms* Titanium S x
VITA ENAMIC®* Hybrid ceramic S ~ x
VITABLOCS® Mark II/TriLuxe forte* Fine-structure feldspar ceramic S x
IPS e.max CAD, Ivoclar Vivadent Lithium disilicate ceramic S x
Validated Workflow:
Scanning CAD CAM
Straumann® CARES® Integrated Digital Solutions 3
ACCESSORIES:
Therm 3 Argotherm 2
Fully automatic high performance furnace for final sintering of distortion-free zirconium oxide frameworks
Shielding gas sinter furnace and flood chamber for Sintron
TECHNICAL DATA STRAUMANN® CARES® M SERIES:
Axes 5
Processing mode Dry / Wet
Tool management 6-compartment tool changer, management of replacement tools
Power Output: 250 W
Motor Speed 100,000 rpm
Compressed Air 50 L/min. at 6 bar
Dimensions 650/570/740 mm (DxWxH)
Weight 75 – 78kg
Straumann® CARES® Coolstream tank 500/200/400 mm (DxWxH), 5kg
Straumann® CARES® Coolstream cart 580/200/880 mm (DxWxH), 42kg
Item No Item
179250-STM Straumann® CARES® M series
178641-STM Straumann Coolstream tank
178642-STM Straumann Coolstream cart
CARES® M series
Straumann® CARES® Integrated Digital Solutions4
High-frequency spindleextremely robust and precise
Blank holderconversion in only a few steps
8 tool spacewith automatic tool changer
Tool length measuring unitIncl. fracture check
Presence sensor for milling tools
Interior lightingfor visual inspection of milling
Connection for extraction protects the internal mechanism against contamination
CARES® D series5-axis technology in a small footprint
ѹ Splints, bars, implant bridgesThe 5-axis unit of the CARES® D series not only masters conventional crown and bridge work, but is also designed for the fabrication of more complex components with dry millable materials.
ѹ High rigidity and stabilityStraumann CARES® D series offers high rigidity and stability without having to forgo the advantages of 5-axis technology.
This results in low-vibration processing which, produces impressive precision on the blank.
ѹ Efficiency and flexibilityFast processing times, a wide range of indications and high quality materials make the CARES® D series a genuine winner in the laboratory.
5Straumann® CARES® Integrated Digital Solutions
Straumann® CARES® Integrated Digital Solutions6
Indications D series
Crowns/bridges fully anatomical/anatomically reduced xInlay/Onlay xVeneer xOverpress fully anatomical xTelescope crown xBridge on conical titanium bases xMulti-unit, screw-retained restorations on titanium bases xBar on titanium base xDigital model fabrication x
Material Material Type D seriesDry
Sintron* CoCr sinter metal x
Zirconia Zirconia x
Wax* Milling wax x
PMMA* Acrylic, transparent x
TEMP* Acrylic, PMMA x
Splintec* Acrylic splints, PMMA x
JUVORA™ PEEK* Polymer resin x
Produce premium restorations using high-performance materials from Straumann® and other leading suppliers. Straumann® CARES® Lab offers a range of CADCAM materials, with disks to meet your specific needs.
*Not cleared for Ti-Base resotrations for in-lab milling.
Validated Workflow:
Scanning CAD CAM
Note: Product availability varies by country. Check with your Straumann Lab Territory Manager for availability.
CARES® D series
Straumann® CARES® Integrated Digital Solutions 7
ACCESSORIES:
Therm 3
Fully automatic high performance furnace for final sintering of distortion-free zirconium oxide frameworks
TECHNICAL DATA STRAUMANN® CARES® D SERIES:
Axes 5
Processing mode Dry
Tool management 8-compartment tool changer, management of replacement tools
Power Output: 250 W
Motor Speed 60,000 rpm
Compressed Air 50 L/min. at 6 bar
Dimensions 480/480/535 mm (DxWxH)
Weight 50 kg
Item No Item
179330-STM Straumann® CARES® D series
Argotherm 2
Shielding gas sinter furnace and flood chamber for Sintron
CARES® D series
NAM
LIT.1
174
7/
18
V1
© Straumann USA, LLC 2018. All rights reserved. Straumann® and/or other trademarks and logos from Straumann® that are mentioned herein are the trademarks or registered trademarks of Straumann Holding AG and/or its affiliates. All rights reserved.
Straumann North American Headquarters Straumann USA, LLC 60 Minuteman Road Andover, MA 01810 Phone 800/448 8168 (US) 800/363 4024 (CA) Fax 978/747 2490 www.straumann.us www.straumann.ca
ifu.straumann.com