CARES® Integrated Digital Solutions

CARES® In-Lab Milling

Product Information

Data Acquisition Planning Surgery Impression Design Production

Post Processing

Final Restoration

CARES® M series

CARES® D series

CARES® M series – wet, wet/dry and dry-milling in a single system

The CARES® M series milling and grinding system enables dental laboratories to produce an extensive range of restorations for every type of indication.

It can handle a wide range of materials. Allowing your lab to produce a broad range of prosthetics, from inlays, onlays, veneers, and single crowns, to bridges and screw-retained restorations. Prosthetics can be milled or ground in wet or dry modes from materials, including glass ceramic, zirconia, PMMA, cobalt-chromium sinter metal, wax, lithium disilicate ceramics and resin nano-ceramic.

The CARES® M series is a single system that can handle the majority of your casework. With

multiple workflow options, you can enjoy the full flexibility of using one system regardless of what case appears from your customer. For work peaks or complex cases, our centralized milling facility operates as an extension of your lab.

ѹ Maximum range of materials and indications thanks to 5-axis wet and dry processing in one unit

ѹ Innovative processing procedures ensure maximum value creation (e.g. rotational milling of titanium, processing of full dentures)

ѹ Intelligent machine design guarantees optimum protection of all electronic components during wet operation

Super high frequency spindlehighly precise, stable, quiet running

Blank holderexchangeable, depend-ing on material or indi-cation

Tool length measuring unitincludes fracture check and calibration

Suction bagfor increased suction performance and reduced spray water

6 tool spaceswith automatic tool changer

Blank holder and wet/dry processing mode in only a few steps Coolant supply tank

connectionlarge volume capacity ensures long operating cycles

Straumann® CARES® Integrated Digital Solutions2

CARES® M series

Produce premium restorations using high-performance materials from Straumann® and other leading suppliers. Straumann® CARES® Lab offers a range of CADCAM materials, with disks to meet your specific needs.

*Not cleared for Ti-Base resotrations for in-lab milling.

Indications M series

Crowns/bridges fully anatomical/anatomically reduced xInlay/Onlay xVeneer xOverpress fully anatomical xTelescope crown xAttachment xCustom titanium abutment xBridge on conical titanium bases xMulti-unit, screw-retained restorations on titanium bases xBar on titanium base xDigital model fabrication x

Material Material Type Processing Dry ~ / Wet S

M seriesDry/Wet

Straumann® n!ce® Lithium silicate ceramic S  x

Zirconia Zirconia ~ x

Wax* Milling wax S ~ x

PMMA* Acrylic, transparent S ~ x

TEMP* Acrylic, PMMA S ~ x

Splintec* Acrylic splints, PMMA S ~ x

JUVORA™ PEEK* Polymer resin S ~ x

Ti-Forms* Titanium S x

VITA ENAMIC®* Hybrid ceramic S ~ x

VITABLOCS® Mark II/TriLuxe forte* Fine-structure feldspar ceramic S x

IPS e.max CAD, Ivoclar Vivadent Lithium disilicate ceramic S x

Validated Workflow:

Scanning CAD CAM

Straumann® CARES® Integrated Digital Solutions 3

ACCESSORIES:

Therm 3 Argotherm 2

Fully automatic high performance furnace for final sintering of distortion-free zirconium oxide frameworks

Shielding gas sinter furnace and flood chamber for Sintron

TECHNICAL DATA STRAUMANN® CARES® M SERIES:

Axes 5

Processing mode Dry / Wet

Tool management 6-compartment tool changer, management of replacement tools

Power Output: 250 W

Motor Speed 100,000 rpm

Compressed Air 50 L/min. at 6 bar

Dimensions 650/570/740 mm (DxWxH)

Weight 75 – 78kg

Straumann® CARES® Coolstream tank 500/200/400 mm (DxWxH), 5kg

Straumann® CARES® Coolstream cart 580/200/880 mm (DxWxH), 42kg

Item No Item

179250-STM Straumann® CARES® M series

178641-STM Straumann Coolstream tank

178642-STM Straumann Coolstream cart

CARES® M series

Straumann® CARES® Integrated Digital Solutions4

High-frequency spindleextremely robust and precise

Blank holderconversion in only a few steps

8 tool spacewith automatic tool changer

Tool length measuring unitIncl. fracture check

Presence sensor for milling tools

Interior lightingfor visual inspection of milling

Connection for extraction protects the internal mechanism against contamination

CARES® D series5-axis technology in a small footprint

ѹ Splints, bars, implant bridgesThe 5-axis unit of the CARES® D series not only masters conventional crown and bridge work, but is also designed for the fabrication of more complex components with dry millable materials.

ѹ High rigidity and stabilityStraumann CARES® D series offers high rigidity and stability without having to forgo the advantages of 5-axis technology.

This results in low-vibration processing which, produces impressive precision on the blank.

ѹ Efficiency and flexibilityFast processing times, a wide range of indications and high quality materials make the CARES® D series a genuine winner in the laboratory.

5Straumann® CARES® Integrated Digital Solutions

Straumann® CARES® Integrated Digital Solutions6

Indications D series

Crowns/bridges fully anatomical/anatomically reduced xInlay/Onlay xVeneer xOverpress fully anatomical xTelescope crown xBridge on conical titanium bases xMulti-unit, screw-retained restorations on titanium bases xBar on titanium base xDigital model fabrication x

Material Material Type D seriesDry

Sintron* CoCr sinter metal x

Zirconia Zirconia x

Wax* Milling wax x

PMMA* Acrylic, transparent x

TEMP* Acrylic, PMMA x

Splintec* Acrylic splints, PMMA x

JUVORA™ PEEK* Polymer resin x

Produce premium restorations using high-performance materials from Straumann® and other leading suppliers. Straumann® CARES® Lab offers a range of CADCAM materials, with disks to meet your specific needs.

*Not cleared for Ti-Base resotrations for in-lab milling.

Validated Workflow:

Scanning CAD CAM

Note: Product availability varies by country. Check with your Straumann Lab Territory Manager for availability.

CARES® D series

Straumann® CARES® Integrated Digital Solutions 7

ACCESSORIES:

Therm 3

Fully automatic high performance furnace for final sintering of distortion-free zirconium oxide frameworks

TECHNICAL DATA STRAUMANN® CARES® D SERIES:

Axes 5

Processing mode Dry

Tool management 8-compartment tool changer, management of replacement tools

Power Output: 250 W

Motor Speed 60,000 rpm

Compressed Air 50 L/min. at 6 bar

Dimensions 480/480/535 mm (DxWxH)

Weight 50 kg

Item No Item

179330-STM Straumann® CARES® D series

Argotherm 2

Shielding gas sinter furnace and flood chamber for Sintron

CARES® D series

NAM

LIT.1

174

7/

18

V1

© Straumann USA, LLC 2018. All rights reserved. Straumann® and/or other trademarks and logos from Straumann® that are mentioned herein are the trademarks or registered trademarks of Straumann Holding AG and/or its affiliates. All rights reserved.

Straumann North American Headquarters Straumann USA, LLC 60 Minuteman Road Andover, MA 01810 Phone 800/448 8168 (US) 800/363 4024 (CA) Fax 978/747 2490 www.straumann.us www.straumann.ca

ifu.straumann.com