8/6/2019 BUSS 348 Final Notes
1/26
1
PUBLIC ENTERPRISES / STATE OWNED ENTERPRISES (SOEs)
Associated with the problems of public administration in developing countries have been the
widespread activities of state-owned enterprises (SOEs), public corporations owned and
operated by the government. In addition to their traditionally dominant presence in utilities
(gas, water, and electricity), transportation (railways, airlines, and buses), and
communications (telephone, telegram, and postal services), SOEs have become active in such
key sectors as large-scale manufacturing, construction, finance, services, natural resources,
and agriculture. Sometimes they may dominate these sectors, particularly in the areas of
natural resources and manufacturing. Even though quite a number of countries in the
developing world dramatically reduced the number of state-owned enterprises through
privatization in the 1990s (Kenya included), state owned enterprises still employed most the
workforce and contributed immensely to industrial output despite the fact that most of them
operated at a loss.
State-owned enterprises have played a major role in the economies of developing nations,
contributing an average of 7% to 15% of their GDP, accounting for a substantial amount of
investment, absorbing substantial amounts of resources and in many cases impose a heavy
fiscal burden on governments. Its worth noting that SOEs differ from private firms in that
they are expected to pursue commercial and social goals.
Rationale for creation of State - Owned Enterprises
1. Persistence of monopoly power in developing countries led to government control to
ensure prices are not set above marginal costs of producing output. In cases of goods and
services that have high social benefits, these will be provided at a price below their costs or
free, and in this situation the private sector will not have the incentive to produce such goods
and services.
2. Capital Formationat the early stages of development (soon after independence) savings
were low and investment in infrastructure was crucial to lay the groundwork for further
investment.
3. Lack of private incentives to engage in economic activities (soon after independence)
because of factors such as uncertainty about size of domestic/ local markets, unreliable
sources of raw materials, absence of technology and skilled labour.
4. Desire by governments in developing countries to gain control over strategic sectors of the
economy such as defence over strategic sectors of the economy over foreign owned
8/6/2019 BUSS 348 Final Notes
2/26
2
enterprises (i.e. multinational corporations MNCs) whose interests may not coincide with
those of the country, or over key sectors for development purposes.
5. Government involvement may also come about as a result of bankruptcy in a major private
industry.
6. Ideological motivations may also be an additional factor in the creation of state-owned
enterprises.
Characteristics of Public Enterprises
i). They are formed by an act of parliament, e.g. the Kenya Investment Authority (K.I.A)
was formed through the Kenya Investment Authority Act enacted by parliament, Central
Bank though the Central Bank Act enacted by parliament.
ii). Government Ownership: - Public enterprises are either wholly owned by the Central
government or local authority or jointly owned by the two or more of them.
Government ownership means that more than 50% of equity (or share holding) is being held
by the public authority.
iii). Government Control and Management: - The government has a right to control and
manage the affairs of the public enterprises.
iv). Public Accountability: - Since public enterprises are provided funds from the public
exchequer, it is important that they be accountable to the public though parliament.
v). Public enterprises are established on the basis of political decisions and their operations
are controlled by systems where politicians have the final say.
vi). Public enterprises are established to serve the welfare purposes of the citizens.
vii). They have a wide business coverage ranging from agriculture to trade, transportation,
banking, tourism etc.
Objectives of Public Enterprises: -
1. Public enterprises are established in order to ensure that theres balanced regional growth
in the country.
2. They are created with the aim of providing employment opportunities for the people.
3. To generate revenue for the government.
4. To provide infrastructural facilities e.g. Kenya Ports Authority, Kenya Airports Authority,
Kenya Railways, etc.
5. To establish key and basic industries e.g. in Kenya we created RIVATEX, KICOMI, KCC,
most of them collapsed.
6. To promote the living standards of the people.
8/6/2019 BUSS 348 Final Notes
3/26
3
TYPES OF PUBLIC ENTERPRISES
1. Commercial Public Enterprises: - These actively participate in marketing and trading
activities. They are not involved in the manufacture of any product or delivery of services e.g.
Uchumi Supermarkets.
2. Manufacturing Public Enterprises: - These enterprises manufacture capital as well as
consumer goods.
3. Financial Public Enterprises: - These are engaged in the provision of finance and
financial services to business e.g. Kenya Commercial Bank, National Bank of Kenya etc.
4. Promotional Public Enterprises: - These are engaged in the promotion of businesses
producing goods and services e.g. Export Promotion Council, Kenya Investment Authority
etc.
5. Public Enterprises: - These provide services to the general public and these services are
essential by nature. Some may operate under monopolistic conditions e.g. Kenya Power and
Lightning Company Ltd, Kenyatta National Hospital, KEMRI, KARI, etc.
BENEFITS OF PUBLIC ENTERPRISES: -
1. Public enterprises help in the exploitation of natural resources in the country in order to
maximize social welfare e.g. Nyayo Tea Zones, Mumias Sugar Company.
2. They help to reduce national and regional disparities in income and wealth through a
planned dispersal of industries.
3. It helps in the industrialization of a country.
4. Public enterprises provide infrastructural facilities for the development of the economy e.g.
Kenya Telkom, Kenya Postal Corporation etc.
5. They provide a forum though which foreign assistance can be utilized for the benefit of the
whole economy especially when foreign governments insist that aid be given only to
government owned organizations.
6. They generate revenue for the government and create employment opportunities for the
people.
7. They stimulate research and development activities leading to the development of
indigenous technologies new products, services and the achievement of self-reliance.
8. They help in maintaining a favourable balance of payments by:
i) Ensuring a sound macroeconomic stability is maintained, i.e. Central Bank.
ii) Substituting Imported Products.
8/6/2019 BUSS 348 Final Notes
4/26
4
LIMITATIONS OF PUBLIC ENTERPRISES: -
1. The lack of commercial approach in the functioning of public enterprises leads to
wastages, low productivity, low profitability and inefficiencies.
2. Public enterprises are required to fulfil a large number of objectives, which are sometimes
conflicting with each other. The objectives are not clear and often there is lack of policy
clarification on various matters.
3. Public enterprises have shortage of skilled, experienced and confident managers because of
a relatively low remuneration. This has led to inefficient management of these enterprises.
4. Public enterprises are faced with the normal government bureaucracy which makes them
inefficient in what should be a competitive commercial environment. Even when they are
making losses, they may be allowed to continue operating because the decision making is
based on political rather than economic grounds.
PRIVATIZATION
Privatization as a process may have a number of interpretations but it is essentially regarded
as a Solution to the problems of state-owned enterprises in developing countries. Its a
process involving the reorganization of the state-owned enterprises through the transfer of
ownership and control from the public to the private sector.
It involves decentralization of decision making to allow for more flexibility and providing
better incentives for managers to increase production efficiency. Privatization hinges on the
neo-classical hypothesis that private ownership brings greater efficiency and more rapid
growth.
Privatization was actively promoted by major International bilateral agencies (USAID) and
Multilateral agencies (World Bank, IMF) in the 1980s and 1990s.
MEANINGS OF PRIVATIZATION: -
1. Liberalization approach: - Privatisation may be used in this sense to mean having fewer
controls and regulation by the state in economic activities. It also means, slowing or stopping
of new controls and regulations and also dismantling of existing controls and regulations.
2. A relative share enlargement approach: - Privatisation may relate to the relative
enlargement of the share of private enterprises in the production of goods and services in the
economy.
8/6/2019 BUSS 348 Final Notes
5/26
5
3. Association of private sector management approach: - This means associating
personnel with long experience of private sector management of the board of directors and
other levels of management of public enterprises.
4. Transfer of minority equity ownership: - Privatisation may be defined in terms of
transferring minority equity ownership of the public enterprises to private individually so that
the ultimate control remains with the state.
5. Transfer of complete ownership: - Privatisation can also be used in the sense of selling
all the shares so that enterprises are converted into private enterprises.
NEED FOR PRIVATISATION
1. Resource Mobilization: - The government expenditure may be growing rapidly leaving
fewer resources for development. Deficits in the budget would be met through borrowing
which reduces the availability of resources for the private enterprises, or, simply crowds out
the private enterprises weakening their ability to produce goods and services. This process
can be reversed through privatization.
2. Reduction of extra tax burden on the people: - A continuous loss incurring public
enterprises force the goods to bear this loss as an extra fiscal burden. The government
compensates this loss by imposing new taxes, which affects the purchasing power of the
public. The remedy to this problem is privatization.
3. Flow of funds to the public exchequer: - The process of privatization directly contributes
to the flow of funds to the public exchequer in the form of realization of money on the sale of
shares of public assets to the private sector.
4. Improvement in Production: - The process of privatization leads to increased efficiency
and productivity and control of waste. This means more availability of resources for
implementation of development and welfare programmes.
5. Better Utilization of bureaucrats: - Privatisation leads to a release of highly trained
labour (the bureaucrats running the state-owned enterprises) from the public enterprises to
run public administration and implement public policies which they are specialized in.
6. Increase in competition: - Privatisation process results in more domestic and International
competition and thereby making management more responsive towards the needs of
customers and the changing technology.
FORMS OF PRIVATISATION
8/6/2019 BUSS 348 Final Notes
6/26
6
1. Complete Privatisation: - This is a situation where ownership of the enterprise is fully
transferred to the private sector.
2. Partial Privatisation: - This may be effected in two ways i.e. minor and major. In minor
privatization a wholly owned government enterprise may offer minority equity i.e. not
exceeding 49% to private parties. In majority ownership the state may transfer majority
shares to the private sector. In this case the government may find it difficult to monitor such
an organisation to protect the social interest.
3. Privatization of Management: - This can be formally effected through a management
contract binding a private party to run the operations of a public enterprise e.g. leasing of
state mines, concessioning the railways etc.
4. Creating Competitive Conditions: - This is a situation where public enterprises compete
amongst themselves or with comparable private enterprises.
5. Reregulation: - Privatisation may also be resorted to in the form of decontrolling and
liberalizing measures for the private sector.
LIMITATIONS
1. It is difficult to evaluate the actual value of the assets to be privatized.
2. Privatisation may bring about unfair competition which could result in wiping out of
existing private sector business in the long run.
3. Privatisation process generally lacks transparency and in most cases there is a lot of
corruption.
4. Privatisation needs strategic planning efforts as well as appropriate administration
apparatus to carry it out. However in many developing countries this process is very
cumbersome due to bureaucratic systems.
5. It may lead to a situation where public monopolies are replaced by private monopolies if
no attempt is made to introduce competition and improve efficiency. It may also hinge on
how transparent the process is carried out.
6. It may lead to job losses.
Its difficult to create political consensus which is essential to decide which enterprises are to
be privatized.
CO-OPERATIVE SOCIETIES
A cooperative is an organization of members who come together to carry out economic
activities and sheer benefits equitably on the basis of cooperative principles. These principles
8/6/2019 BUSS 348 Final Notes
7/26
7
are formulated by international cooperative alliance. These principles define the
characteristics of co-operative societies. Some of these principles include: -
(i) Voluntary and open membership.
(ii) Democratic administration.
(iii) Limited interest on shares.
(iv) Promotion of education to members.
(v) Non-profit motive.
(vi) Cooperation with other cooperatives.
FORMATION AND OPERATION OF COOPERATIVES: -
Cooperatives are registered by the commissioner of Cooperatives Department who has the
power to register or even cancel the registration of a cooperative society. All cooperatives are
required to operate in accordance with the cooperative Act of 1972 and also the relevant by-
laws. There are different by-laws for different types of cooperatives e.g. farming
cooperatives, housing cooperatives, savings and credit cooperatives etc.
These by-laws are prepared by the commissioner of Cooperatives Development and must be
adopted by the cooperatives before they are registered. A cooperative cannot change its by-
laws without the approval by the commissioner for Cooperative Development. A cooperative
should have a minimum of ten (10) members. All major decisions of cooperatives must be
made at general meetings by a majority vote. A cooperative is run on the basis of one
member, one vote.
STRUCTURE OF COOPERATIVES IN KENYA: -
(1) Primary Cooperative Societies.
(2) Cooperative Unions.
(3) Countrywide Cooperatives.
(4) Kenya Natural Federation of Cooperatives.
TYPES OF COOPERATIVES: -
(1) Housing Societies e.g. East African Building Society.
(2) Producers Cooperatives: These are involved in production and marketing of product
collectively.
(3) Marketing Cooperatives: This is a case whereby producers form cooperative societies to
provide marketing facilities for their commodities.
(4) Banking Cooperatives e.g. the Cooperative Bank of Kenya. They are involved in
financial services.
8/6/2019 BUSS 348 Final Notes
8/26
8
(5) Trade and distribution Cooperatives: These are established by an Act of Parliament
and they are responsible for controlling the production and marketing of primary and
processed agricultural commodities. They have the powers to buy and sell the whole of the
home produced commodity and prescribed the terms of sale. Such marketing board facilities
exist in Kenya e.g. Kenya Pyrethrum Board, Coffee Board of Kenya, etc.
NEED FOR MARKETING BOARDS: -
Marketing boards deal with economic activities which the government considers basic and
vital to the economy. Even though the boards are set up to serve economic functions they also
serve social and political functions i.e. Provide employment, mobilize savings and stimulate
investment. If the activities performed by the cooperatives were left to the private sector, the
social and political gains of the people are likely to suffer since economic gains or
considerations will take the upper hand.
GLOBALIZATION
It is a process over the past several decades in which the economies of the world have
become increasingly linked, through expanded international trade in services as well as
primary and manufactured goods through portfolio investments such as international loans
and purchase of stock, and through foreign direct investment especially on the part of large
multinational corporations.
At the same time foreign aid has increased very little and indeed has become dwarfed by the
now much larger flows of private capital. These links have had marked effects in the
developing world. Developing countries are importing and exporting more from each other,
as well as from the developed world, especially South East Asia but notably Latin America as
well, investments have poured in from developed countries such as the United States, U.K,
and Japan. The main features of the process are:
1. Integration of economies worldwide where the world economy is viewed as a single
market and production area with the regional and sub-regional sectors rather than a set of
national economies linked by trade and investment flows. This integration is personified by a
global policy making, for example through international agencies such as the World Trade
organization (WTO). It suggests also exciting business opportunities, more rapid growth of
knowledge and innovation, or the prospect of world too interdependent to engage in war.
2. Internationalization of corruption i.e emergence of a global culture in which people more
often consume similar goods and services across countries and use a common language of
8/6/2019 BUSS 348 Final Notes
9/26
9
business, English; these changes facilitate economic integration and are in turn further
promoted by it.
3. Cross boarder operations of economic activity in production, investment and technology.
4. Optimal utilization of global resources including competitive sourcing of inputs for
achieving competitiveness in production, economies of scale in operations and efficient
technology utilization.
5. Easy movement of products and factor flows across borders involving merchandise,
services, investment, financial capital, technology and labour.
6. Competition, production and markets become global in nature and goods and services
become less distinguishable or identifiable with their country of origin.
INTERNATIONAL TRADE AND THE ROLE OF GOVERNMENT
Reasons for the development of international trade
(1) Some goods and services cannot be produced by a country at all because the country may
simply not process the raw materials that it requires, thus it has to buy them from other
countries.
(2) Some goods and services cannot be produced as efficiently as elsewhere and it makes
more sense to import them.
(3) It may be better for a country to give up the production of a good and import it instead in
order to concentrate its resources in producing something else.
(4) International trade would encourage competition and provide choice.
(5) International trade would fill in the gaps particularly when an economy experiences
shortages during a time of high domestic demand. In such a situation goods and services are
imported to overcome the shortages.
ADVANTAGES OF INTERNATIONAL TRADE
The main benefit of international trade is to make participating countries better off than they
otherwise would have been without it. This is due to a number of advantages that a country
can derive from international trade:-
1. Sale of surplus products.
2. Import of what cannot be produced.
3. Specialization according to comparative advantage
4. Stimulates competition
5. Introduction of new ideas.
8/6/2019 BUSS 348 Final Notes
10/26
10
6. Widening of choice to the consumer
7. Creation and maintenance of employment.
ROLE OF THE GOVERNMENT IN INTERNATIONAL BUSINESS
The government establishes economic and foreign policies and also gives direct assistance to
business. The government may opt for a tariff policy, i.e. impose duties and restrictions on
imports and exports. There are two possible tariff policies:-
1. Free Trade
This is a policy where the government allows free flow of goods and services. This policy
rests on the argument that countries will specialize in the production of those goods and
services at which they are best qualified in terms of their resource endowment.
The theory of comparative advantage was advanced in justification of the argument that free
trade was of mutual advantage to every country. It was thought to be natural for every
country to specialize in the production of certain commodities on the basis of their own
advantage and exchange the surplus of specialized commodities for the surplus of other
countrys goods and services. The cost of production in both countries would be reduced
because of the economies of large scale production of only a few commodities.
This was part and parcel of the policy of laissez faire. The spirit of laissez faire is at the
centre of liberalization and globalization of business.
2. Protection
Protection is that policy when the government imposes both tariff and non-tariff barriers on
imports and exports. Protection reduces international division of labour, opportunities and
protects the relatively inefficient domestic producer. Protectionism may be carried out in a
number of ways:-
(1) By imposition of tariffs or duties.
(2) Quotas or quantitative restrictions.
(3) Allowing subsidies to home industries/producers to enable them to compete with imports
and reduce the quantity of imports.
3. Liberalization
Liberalization refers to opening up markets through the use of different measures, i.e.
(i) Reduction of tariffs and non-tariff barriers.
(ii) Increasing transparency of trade policies and regulation.
(iii) Deregulation of domestic regulatory measures including liberalization of investment and
capital.
8/6/2019 BUSS 348 Final Notes
11/26
11
(iv) Simplifying customs procedures and practices as part of trade facilitation measures
If the government wants to attract foreign investments it must create a favourable
environment. The policies and actions that can be used by the government to promote or
attract foreign business include the following:-
(1) The use of tariff and non-tariff barriers.
(2) Providing a favourable domestic interest rate environment.
(3) Giving tax concessions to business.
(4) Ensuring there is political stability in the country.
(5) Ensuring there are adequate provisions for repatriation of profits
(6) The government should maintain macroeconomic stability to ensure that the country is
able to achieve a favourable balance of payment position.
Other factors that are used in attracting foreign investments:-
Elimination of bureaucratic delays. Ensuring that there is reasonable rate of economic growth The government can assist in setting up socio economic infrastructure and provide
legislation to guarantee security of property.
By setting up institutions, the Export Promotion Council (E.P.C.) The ExportProcessing Zones (EPZ) and the Kenya Investment Authority (KIA) set up by the
Kenya Government to promote trade and investment and assist businessmen with
information, technical assistance, provide incentives and assist in the formulation and
implementation of trade and investment policies.
FACTORS BEHIND GLOBALIZATION AND LIBERALIZATION
The economic circumstances and factors that have encouraged globalization and
liberalization:-
1. Improvement in transport, communication, information, technology networks that has led
to lower cost of transactions and of doing business globally.
2. Increased efficiency in production made possible by increased specialization and excess
capacity utilization which could easily be stifled by a small domestic market.
3. Increased production levels due to better exploitation of economies of scale made possible
by increased sources of raw materials and markets.
8/6/2019 BUSS 348 Final Notes
12/26
12
4. Greater worldwide acceptance and commitment to the free trade principle and market
economy and dismantling of planned economies.
5. Easy movement of factors of production across national borders. This has facilitated
borders. This has facilitated firms to locate different parts of their production process in
different countries.
6. Dismantling and lowering of tariff and non-tariff barriers and deregulation of trade,
investment and capital flows both at national or international levels.
BENEFITS OF OPENING UP MARKETS
The benefits of opening up markets include:-
1. Promotion of a conducive environment for business which is necessary for their continuous
growth.
2. Promotion of a cost effective business environment.
3. Encouragement of competition and increased efficiency.
4. Liberalization of trade and investment, as well as deregulation and privatization of
business opportunities generates opportunities for trade and investment and technology flows.
5. Provision of a wider choice of goods and services and reduced prices resulting from
increased international competition.
6. Countries can obtain reciprocal market openings by trading partners particularly in the
context of multilateral, regional, or bilateral negotiations.
BENEFITS OF GLOBALIZATION
The benefits of globalization include:-
1. Allows greater realization of potential, economies of scale of operations and productivity
improvement through cross border specialization and utilization of global factors of
production and technology. Globalization makes it possible for the less developed countries
to more effectively absorb the knowledge that is one of the foundations of the wealth of
developed countries.
In 1776 Adam Smith wrote: the division of labour is limited by the extent of the
market. The larger the market that can be sold to, the greater the gains fromtrade and the
division of labour. Moreover, the greater is the incentive forinnovation, because the potential
return is much greater.
2. More productive application of capital worldwide, maximization of the rate of saving and
investment which national opportunities are unable to provide.
8/6/2019 BUSS 348 Final Notes
13/26
13
NEGATIVE EFFECTS OF GLOBALIZATION
The negative effects include:-
1. Leads to loss of employment as low technology, labour intensive production shift to low
income countries.
2. There is loss of sovereignty of national objectives and priorities to multilateral global rules,
i.e. set by World Trade Organization (WTO), International Monetary Fund (IMF), World
Bank, Universal Postal Union (UPU), World Tourism Organization (WTO), which may
sideline national priorities.
3. Inadequacy and unreadiness of domestic national capacity to participate actively may lead
to marginalization and inability to realize the benefits of globalization.
PRIVATE FOREIGN INVESTMENT, MULTINATIONALS AND ECONOMIC
DEVELOPMENT
Private foreign capital flowed to the underdeveloped countries at the turn of the 20 th century
in the form of indirect investments from Europe. In the 1920s the capital that flowed to the
underdeveloped countries was in the form of direct investments which went mainly into
production of export. Very little of it went into manufacturing for the domestic market. But
since World War II, over half of the private investments have been direct. Direct foreign
investment has been concentrated mainly in the extraction of raw materials like iron, crude
oil, manganese, bauxite, copper, electric energy, etc. Only a small percentage has gone to
manufacturing and distribution. Until such time an underdeveloped economy takes off, very
little foreign direct investment has been realised in manufacturing the main reasons why
direct foreign capital in manufacturing flows to those countries which are industrially
advanced and have large domestic markets.
ADVANTAGES OF PRIVATE FOREIGN INVESTMENT
1. Private foreign investment (P.F.I) provides not only finance but also managerial,
administrative and technical personnel, new technology, research and innovations in products
and techniques of production which are in short supply in LDCs.
2. P.F.I. encourages local enterprises to invest in two ways: - directly by fostering local
enterprise with men, money and material and by imparting training and experience to its
personnel, and indirectly by creating demand for ancillary or subsidiary services like
8/6/2019 BUSS 348 Final Notes
14/26
14
transport and training agents which are uneconomical for private foreign enterprise to
provide.
3. By bringing capital and foreign exchange, P.F.I, helps in filling the savings gap and the
foreign exchange gap in order to achieve the goal of national economic development in
LDCs.
4. Part of the profits from P.F.I are ploughed back into expansion, modernisation or
development of related industries.
5. P.F.I adds more value added to output in the host country than the return on capital from
foreign investment. In this sense, the social returns are greater than the private returns on
foreign investment.
6. P.F.I generates tax revenues to LDCs when foreign firms are taxed and also generates
royalties from concession agreements.
7. P.F.I raises productivity through the introduction of new technology and hence real wages
of the local labour. If foreign investment induced industrialisation takes place, real wages rise
for newly employed workers are higher than the real wages of workers in the rural sector. If
P.F.I is in export-oriented industries, it may create forward and backward linkages in the
economy and also create employment opportunities.
8. If P.F.I is in agriculture and extractive industries which produce primary products for
export, it helps in easing off balance of payments position of LDCs.
9. May encourage entrepreneurs in LDCs to invest in other LDCs, e.g. firms in India have
started investing in Nepal, Ethiopia and Kenya and other LDCs.
DISADVANTAGES OF FOREIGN DIRECT INVESTMENT
1. The recipient country may be required to provide basic facilities like land, power and other
public utilities, concessions in the form of tax holiday, development rebate, rebate on
undistributed profits, additional depreciation allowance, subsidised inputs, etc. Such
concessions involve costs in absorbing LDCs resources that could have been utilised by the
government(s) elsewhere.
2. To attract P.F.I, LDCs must provide sufficient facilities for transferring profits, dividends,
interest and principal and this may create serious balance of payments problems.
3. Capital and other resources may flow to foreign businesses in preference to domestic
businesses. This may affect the distribution of income and wealth in LDCs negatively and
may reduce profits in the affected local business firms and thereby discouraging local
enterprises.
8/6/2019 BUSS 348 Final Notes
15/26
15
4. Many foreign companies in LDCs reserve all senior executive posts for their nationals and
pay them high salaries plus other benefits which are a huge drain on the resources of the
recipient country.
5. P.F.I brings in highly capital intensive technologies which do not fit in the factor
proportions of LDCs. Often obsolete and discarded machines and techniques are imported
which involve high social costs in terms of replacement after a few years.
6. P.F.I also involves costs in the form of loss of domestic autonomy when foreign firms
interfere in policy making decisions of the government of an LDC which favours foreign
enterprises
MULTINATIONAL CORPORATIONS AND LDCs
A multinational corporation (MNC) is a company, firm or enterprise with its headquarters in
a developed country such as U.S.A, Britain, Germany, Japan and operates in other countries,
both developing and developed. They are spread not only in the LDCs of Asia,
Africa, Latin America, but also on the continents of Europe, Australia, New Zealand, and
South America. They are engaged in mining, tea, rubber, coffee and cocoa plantations, oil
extraction and refining, manufacturing for home production and exports, etc. Their operations
also include such services such as banking, insurance, shipping, hotels and so on. These firms
are also called transnational because they engage in international production. These firms
may also be distinguished as ethnocentric (home-oriented) polycentric (host-oriented) and
geocentric (world-oriented), on the basis of attitudes revealed by their executives.
Multinationals invest in many countries for several reasons: -
1. To exploit cheap raw materials in developing countries e.g. minerals, etc
2. To exploit cheap non-unionisable labour in LDCs.
3. To exploit fast growing markets overseas
4. To exploit the agricultural potential in developing countries
FACTORS INFLUENCING THE DESTINATIONS OF INVESTMENT BY MNCs
MNCs set up their plants in countries where they can realise quickly their returns. MNCs
locate their investments in countries where the following conditions are satisfied: -
1. Stable political conditions exist to enable them enjoy long term benefits to their
investment.
2. High rates of economic growth to ensure high sales and profits.
3. Large domestic markets to provide, a market for their products.
8/6/2019 BUSS 348 Final Notes
16/26
16
4. Favourable tax systems e.g. low taxes in profits, tax holidays, etc
5. Favourable government policies like freedom to export products, to import raw materials,
freedom to repatriate profits, etc.
6. Stable macroeconomic environment i.e. low inflation, stable exchange rates, stable interest
rates, stable balance of payments, manageable national and domestic debt, etc to promote
business activities
7. Availability of a pool or pools of educated and skilled labour
8. Well developed physical and social infrastructure facilities i.e. roads, water,
telecommunications, power supply, health, education, housing, etc.
FEATURES OF MNCs
1. Operate in more than one country.
2. Most have a lot of capital for investment
3. Use same strategy in marketing, production, etc
4. Use the same patents, copy rights and trademarks.
5. Most of them are old and well established businesses.
Roles / Benefits / Advantages of MNCs in LDCs
1. Create employment to citizens of the host country. Those employed earn income and this
helps improve their standard of living.
2. Introduce to LDCs new advanced technology, new ideas and new methods of production in
LDCs. This improves productivity and efficiency in production leading to increased
output, employment, incomes and GNP/GDP.
3. Provide ready market for raw materials e.g. minerals found in host country
4. Multinationals are strong and provide large and cheap capital to LDCs by the way of direct
investment.
5. Undertake heavy risks by investing their capital in LDCs in the face of imperfect
infrastructural facilities e.g. power supply, transport, poor administrative services, and lack
of skilled labour.
6. May start new ventures and bring into LDCs advantages of superior management, training,
education and entrepreneurial skills.
7. Competition between foreign firms and domestic firms may lead to production of high
quality goods for consumers.
8/6/2019 BUSS 348 Final Notes
17/26
17
8. They will generate higher government tax revenues which will be used to finance various
development projects in LDCs.
9. MNCs production of goods and services may lead to reduction in the level of imports and
hence favourable Balance of Payments (B.O.P) in LDCs. Goods that were initially
imported could now be produced locally by such companies.
10. Generates foreign exchange earnings through production export of goods and services
11. LDCs gain access through MNCs to the international financial markets through sale of
securities, i.e., shares, bonds in foreign markets to raise capital.
12. People in the host country enjoy a wider selection of high quality goods and services
produced by MNCs, a sign of improved standard of living for the people.
13. Developing and developed countries benefit from reasonably well priced goods and
services like textiles that the MNCs produce with cheap resources, labour, etc found in
LDCs.
Disadvantages / Costs
1. Labour in LDCs doesnt benefit by getting employment opportunities to improve standard
of living. This is because most MNCs import skilled workers from their own country
rather than employ the local people.
2. MNCs import inappropriate technology mainly capital intensive in production that creates
few jobs in LDCs.
3. All MNCs repatriate the profits to their mother countries instead of re-investing them
domestically to generate further economic growth in LDCs.
4. MNCs cause environmental damage due to the depletion of natural resources and
generation of negative externalities. MNCs cause mass exploitation of non-renewable
resources of the host country leading to environmental degradation and leave the poor
country even poorer.
5. Many MNCs introduce different working conditions in LDCs, i.e., long working hours and
low wage rates leading to poor industrial relation problemsstrikes.
6. MNCs may engage in dangerous economic activities e.g. chemical production which they
may not be allowed to produce in their own countries.
7. Breed socio-economic inequalities e.g. favour and pay imported workers more than the
local employees. This leads to unrest and discontent among workers employed in the local
industries.
8/6/2019 BUSS 348 Final Notes
18/26
18
8. MNCs transfer second rate and obsolete (already used), and yet overpriced technology to
LDCs.
9. MNCs locate their business firms in urban centres already developed i.e. having social
amenities/infrastructure ignoring the rural areas and this worsens the dualistic
development between the urban and rural areas in LDCs. As a result, the masses miss out
in economic development reinforcing the vicious cycle of poverty in the countryside.
10. MNCs cause unfair competition to local firms by undercutting them, e.g., charge low
prices for their products. This may cause the local firms to collapse and if they are few
whats likely to happen is that the MNCs may buy them (through acquisitions or mergers)
and exercise control over them.
11. May influence the internal politics of a country at the expense of LDCs citizens welfare
by bribing the political leadership. They do so by offering posts in the higher levels of
their companies to the friends, relatives, etc to the local politicians.
12. MNCs are not easily controlled by governments in the host countries and even by mother
countries because branches are spread all over the world.
INTERNATIONAL TRADE AND ECONOMIC DEVELOPMENT
Economic Integration
Economic integration also referred to as regional economic groupings has been advanced by
many economists as one of the modern promising ways in which countries can improve their
trading relations and speed up their industrialisation processes and achieve rapid economic
growth and development. Economic integration occurs when a group of countries in the same
region come together and cooperate with each other in order to promote free trade to achieve
certain economic objectives. Such countries do so by forming trading blocs/or common
markets by removing trade barriers, e.g., quotas, tariffs, total ban, etc. Examples of economic
integration efforts around the world include: European Union, COMESA, East African
Community (E.A.C), ECOWAS, etc.
Forms / Levels of economic integration
1. Free Trade Area: -
It is the simplest form of economic integration. In this case member countries allow free trade
by eliminating trade barriers e.g. tariffs, ban, quotas, etc. Each country, however, establishes
its own protection measures against products from non-member countries.
2. Customs Union
8/6/2019 BUSS 348 Final Notes
19/26
19
Member countries promote free trade by removing trade barriers. The countries have a
common external tariff imposed on products from non-member countries.
3. Common Market
There is free trade among countries, i.e., no trade barriers. There is a common external tariff
on products from outside the trading bloc, member countries allow free movement of factors
of production within member countries e.g. COMESA
4. Economic Union
Member countries allow free internal trade. There is a common external tariff on products
from non-member countries and free movement of factors of production within the region
under the economic union. Member countries may have common public services, e.g., rail,
transport and common currencyEuro in the European Union.
Advantages of economic integration
1. Firms in the region are able to enjoy a wider market for their products. Firms produce on a
large scale, enjoy economies of scale, more output and economic growth.
2. Provides a good ground for countries to coordinate the development of industries. This can
be done by the grouping agreeing to assign certain industries to each of the members.
3. It promotes specialisation. Each country can concentrate in producing the commodities
which are best suited to it depending on its resource endowment. This will lead to better
utilisation of resources, avoid unnecessary wastage of resources through duplication,
increased output and incomes and the region is able to achieve rapid economic growth.
4. The member countries enjoy greater economic strength by having a common front when it
comes to bargaining with non-member countries. For example, by acting as a group they
have more bargaining power when dealing with non-member countries rather than
operating as individual countries.
5. Economic integration promotes peace and good neighbourliness among countries.
6. Economic integration increases competition among member countries. This promotes
efficiency and production of high quality goods and services at lower costs enjoyed by
consumers.
7. Enables consumers of member countries to obtain a variety of goods and services produced
in the other countries easily.
8. Establishment of industries and subsidiaries in the other member countries becomes easier.
This increases employment opportunities and output in the region/grouping.
8/6/2019 BUSS 348 Final Notes
20/26
20
9. Free movement of factors of production e.g. labour reduces unemployment as labour
moves from areas where there is excess labour to areas where you have deficits or where it
is needed. This leads to the increase of national incomes (GNP) of member countries.
10. The transfer of technology which is necessary to increase production and promote
economic growth between member countries becomes easier.
Disadvantages of economic integration
1. The abolition of import duties (i.e. tariffs) leads to the loss of government revenue needed
for financing productive economic activities in developing countries.
2. In the process of promoting internal free trade in the bloc/or grouping among member
countries and discouraging external trade, a country may find that it has become or created
to be a low cost source of goods, services, raw materials, etc from outside the market to a
high cost source inside the bloc. Such a country, therefore, may be worse off after the
integration.
3. Some countries within the bloc/grouping benefit more than others due to differences in
levels of economic development. A more advanced country exports more than a country
less advanced hence benefits more than the others. Which country in E.A.C benefits more
than others.
4. Some countries dump cheap goods in other countries leading to unfair competition among
countries and weak industries close down.
Limitations of economic integration
1. Communication problems due to language barriers given that different countries have
different languages.
2. Political instability especially in poor countries which are ever in war. This makes business
activities difficult to accomplish.
3. Most LDCs produce primary products which are similar hence there is no need to
integrate.
4. Differences in currencies among countries create payment problems.
5. Differences in the levels of economic development and growth among countries mean that
some countries gain more than others in the grouping.
6. Differences in ideological orientation e.g., some may be inclined towards capitalism and
others inclined towards socialism, thus may cause a rift among them and lead to the
breakdown of the grouping as was the case with the East African Community during the
8/6/2019 BUSS 348 Final Notes
21/26
21
time of the late Julius Kambarage Nyerere in Tanzania, late Idi Amin of Uganda and Mzee
Jomo Kenyatta of Kenya.
7. Poor physical and social infrastructural services, e.g., roads, telecommunications, power
supply, railways, water supply, education, health, housing, etc affects the performance of
the grouping, i.e., movement of goods and services, capital, adoption of new technology,
upgrading of skills the overall performance and economic growth of the grouping
suffers.
BRETTON WOODS INSTITUTIONS
Bretton Woods Institutions refers to the international financial institutions i.e. World Bank
and IMF. They were established following a conference held at Bretton Woods, New
Hampshire, U.S.A in 1944 to discuss the problems of post World War II. World War II ended
in 1945. The conference agreed to establish the International Bank of Reconstruction and
Development (IBRD) and the International Monetary Fund (I.M.F).
WORLD BANK GROUP
The World Bank Group consists of 5 closely associated institutions all owned by member
countries. Each institution plays a distinct role in the mission to fight poverty and improve the
living standards for people in developing countries. The term World Bank
Group encompasses all 5 institutions whereas the term World Bank refers specifically to
the IBRD and IDA.
THE WORLD BANK (IBRD & IDA)
1. THE INTERNATIONAL BANK FOR RECONSTRUCTION AND
DEVELOPMENT (I.B.R.D): -
It was established in 1945. Kenya became a member on February 3, 1964.
Aim: To reduce poverty by lending to developing countries loans, guarantees, and
providing non-lending services such as advisory services. IBRD does not aim at maximising
profits but has over the years earned a net income since 1948. Owned by member countries,
and voting power is linked to member-country subscriptions. The subscriptions are based on
a countrys relative economic strength.
2. THE INTERNATIONAL DEVELOPMENT ASSOCIATION (I.D.A)
It was established in 1960. It helps the worlds poorest countries reduce poverty levels by
providing interest free credit with 10 year period grace period and maturities of 35 to 40
years.
8/6/2019 BUSS 348 Final Notes
22/26
22
Most countries supported by I.D.A have per capita incomes of less than US$500 per year.
Kenyas per capita income is US$580.
The I.D.A assists in providing access to better basic services such as health and education and
supports reforms and investments aimed at employment creation and productivity growth.
3. THE INTERNATIONAL FINANCE CORPORATION (I.F.C.)
It was established in 1956. The mandate of the IFC is to further economic development
through the private sector. In association with business partners it invests in sustainable
private enterprises in developing countries and also provides long term loans, guarantees and
risk management and advisory services to its clients.
The IFC invests in regions and projects in regions and sectors which are insufficiently served
by private investment and seeks new ways to develop promising opportunities in markets
which are considered too risky by commercial investors in the absence of IFC participation.
4. THE MULTILATERAL INVESTMENT GUARANTEE AGENCY (MIGA):-
It was established in 1988.
It promotes F.D.I into emerging/developing economies improve standards of living and
reduce poverty.
MIGA offers political risk insurance in the form of guarantees to investors and lenders
thereby helping developing countries to attract and retain foreign investment. These non-
commercial risks include expropriation, currency inconvertibility and transfer restrictions,
and war and civil disturbances. MIGAs guarantee coverage requires investors to adhere to
high social and environmental standards. MIGA provides technical assistance to help
countries disseminate information on investment opportunities. MIGA also offers investment
dispute mediation on request.
5. THE INTERNATIONAL CENTRE FOR SETTLEMENT OF INVESTMENT
DISPUTES (ICSID):-
It was established in 1966. Encourages foreign investment by the provision of international
facilities for conciliation and arbitration of investment disputes. Helps create an environment
of mutual confidence between states and foreign investors. Many international agreements in
the area of investment refer to arbitration facilities provided by ICSID. Recourse to ICSID
reconciliation and arbitration is voluntary ICSID has research and publishing activities in
areas of arbitration law and foreign investment law.
8/6/2019 BUSS 348 Final Notes
23/26
23
INTERNATIONAL MONETARY FUND (I.M.F.)
The I.M.F was established in 1945 and according to Article 1 of the Articles of Agreement of
the International Monetary Fund, it has the following aims: -
1. To promote international monetary co-operation through a permanent institution which
provides the machinery for consultation and collaboration on international monetary
problems.
2. To facilitate the expansion and balanced growth of international trade, and to contribute
thereby to the promotion of maintenance of high levels of employment and real income and
to the development of the productive resources of all members as
primary objectives of economic policy.
3. To promote exchange rate stability to maintain orderly exchange arrangements among
members, and to avoid competitive exchange depreciation.
4. To assist in the establishment of a multilateral system of payments in respect of current
transactions between members and in the elimination of foreign exchange restrictions which
hamper the growth of world trade.
5. To give confidence to members by making the general resources of the fund temporarily
available to them under adequate safeguards thereby providing them with the opportunity to
correct maladjustments in their balance of payments without resorting to measures
destructive of national or international prosperity.
6. In accordance with the above, to shorten duration and lessen the degree of disequilibrium
in the international balance of payments of members.
Membership of I.M.F so far is 184 members including Kenya and carries out work in 3 main
areas: -
1. Surveillance: - this involves monitoring economic and financial development and the
provision of advice aimed at crisis prevention.
2. Lending: - IMF lends to countries with B.O.P difficulties as a means of providing
temporary financing and in order to support policies aimed at correcting the underlying
problems. In addition loans are provided to low-income countries which are especially aimed
at poverty reduction.
3. Technical assistance and training: - these are provided by the I.M.F in its areas of
expertise.
4. Research and statistics: - this function is aimed at supporting the previous three aspects
of the work of the I.M.F. Recently, the I.M.F. has applied its surveillance and technical
8/6/2019 BUSS 348 Final Notes
24/26
24
assistance work to the development of standards and codes of good practice in its areas of
responsibility and to areas of financial sectors. Standards and codes have been improved in
data standards, fiscal transparency and transparency in monetary and financial policies.
I.M.F. LENDING
Loansa country must meet certain conditions to access the loan. These arrangements are
based on economic programmes formulated by countries in consultation with I.M.F.
Loans released in phases as per the agreed programmes.
Lending by I.M.F. can be either CONCESSIONAL or NON-CONCESSIONAL. I.M.F.
discourages excessive use of its resources by imposing a surcharge (an interest rate premium)
on large loans.
CONCESSIONAL IMF FACILITIES: -
Poverty Reduction and Growth Facilities (PRGF)
In 1999 the Enhanced Structural Adjustment Facility (ESAF) was replaced by PRGF.
For a long period financial assistance to developing countries was given under the ESAF
window. Loans are based on poverty reduction strategy paper which is prepared in
collaboration with civil society and other development parties, especially the World Bank.
PRGF loans 0.5% interest rate and has repayment 5 10 years.
NON-CONCESSIONAL I.M.F. FACILITIES
These loans are based on I.M.F. market related interest rate based on SDR interest rate,
reused weekly to take into account the changes in the major international money markets.
The non-concessional facilities include: -
1. Standby Arrangement (SBA) to deal with B.O.P problems, 1218 months and
repayments is expected within 24 years.
2. The External Fund Facility (EFF)established in 1974 to deal with B.O.P problems rooted
in the structure of the economy. Repayment period 47 years
3. Supplementary Reserve Facility (SRF)1997
4. Contingent Credit Facility (C.C.F)1999
5. Compensatory Financing Facility (C.F.F.)established in the 1960s
6. Emergency assistance against natural disasters or countries emerging from conflicts. Loans
repayable 35 years.
8/6/2019 BUSS 348 Final Notes
25/26
25
STRUCTURAL ADJUSTMENT PROGRAMMES (S.A.Ps) /ECONOMIC REFORM
PROGRAMMES
Structural adjustment programmes/economic reform programmes use a combination of fiscal,
monetary and sectoral policies to formulate regulations and create institutions that are used to
change relative prices and the level of government spending. The implementation of
structural adjustment programmes is usually undertaken in exchange for financial assistance
from multilateral organisations such as the International Monetary Fund (I.M.F) and the
World Bank. The structural adjustment programmes were meant to help the LDCs to recover
from their economic problems and achieve economic growth and development. They were
introduced by IMF and World Bank and carried out during 1980s and 1990s. These structural
adjustment programmes incorporate the following measures: -
1. A liberalization of the foreign currency market. The primary intention of liberalising
the foreign exchange market is to make it more efficient by ensuring that it accurately reflects
the relative scarcity of different currencies. In countries where a fixed exchange rate exists,
the Central Bank is encouraged to fix the exchange rate at a competitive level usually through
further devaluation.
2. The reduction of government spending aimed at reducing the budget deficit . This
usually involves a reduction of subsidies, a reduction of the civil service and cost sharing,
e.g., in the education and health. Its desirable to reduce the budget deficit because budget
deficits are inflationary and lead to the crowding out of private investment through high
interest rates.
3. Trade liberalisation involves the reduction of protectionist measures like tariffs, quotas
and exchange controls with the aim of improving the efficiency of domestic producers by
opening them to foreign competition.
4. Privatisation of state enterprises where the role of the public sector in the economy is
reduced and most non-strategic state enterprises are sold off to the private sector.
Privatisation generates revenue for the government while at the same time improving
efficiency and resource allocation in the formerly state-controlled enterprises.
5. Price liberalisation whereby price controls are gradually abolished and prices are
determined by the forces of demand and supply. The abolition of price controls is done with
the intention of enhancing efficient resource allocation.
NEGATIVE EFFECTS OF SAPs
8/6/2019 BUSS 348 Final Notes
26/26
1. SAPs have led to increased unemployment due to reduction of government expenditure.
This is because governments of most poor countries retrenched workers and froze
employment.
2. Promotion of market economies through liberalisation has led to rich countries dumping
cheap goods in poor countries and promoting unfair competition between foreign and local
firms and in turn has led to the collapse of local industries. This has increased unemployment
and poverty in the rural areas.
3. Reduction of subsidies to producers has led to the collapse of the agricultural sector and
other sectors in poor countries and in turn has hindered economic growth and development
4. The unfair trade which has been brought about liberalisation (see no.2 above i.e. opening
up of markets by poor countries) has led to unfavourable balance of payments (B.O.P) for the
economies of poor countries.
5. Privatisation has made essential goods and services very expensive and beyond the reach
of the poor people in developing economies. The state owned enterprises (S.O.Es) that were
privatised in the LDCs laid-off workers in the process of cutting down costs leading to
unemployment, suffering and poverty in these countries.
LIMITATIONS OF I.M.F
1. I.M.F is dominated by the rich countries (USA and Britain) and poor countries have no say
when it comes to formulating policies and decision making. Policies are made by the rich
countries and in most cases favour them and not LDCs.
2. I.M.F. discriminates against Africa and Asian countries when giving out loans. In most
cases there are conditional ties attached to the loans.
3. I.M.F. has failed to achieve free conversion of exchange rates.
4. I.M.F does not provide adequate funds according to the needs of LDCs.