Ph: 1300 ELSAFE | www.oeelsafe.com.au | [email protected]
Frameless and perfectly flush, axxessPLUS is a top of the range in-desk solution from OE Elsafe.
Developed to satisfy the most discerning user, axxessPLUS maintains the superb finish of the most luxurious desks, whilst providing easy access to power, TUFA+C: TWIN USB FAST charging and data services.
AxxessPLUS features one lid, with either a cable flap or brush strip to facilitate cable feed, and is available in either non-veneerable (naturally anodised aluminium) or recessed to enable veneering to match the desk finish.*Single door with brush-strip option
axxess PLUS
Ph: 1300 ELSAFE | www.oeelsafe.com.au | [email protected]
AXXESSPLUS CUT-OUT AND FIXING DETAILS
Power and Data configuration (if applicable)Power only / Data only / Combined (Power & Data/AV).
Insulation: Reinforced insulation.
Testing:100% testing - continuity, polarity, insulation & earth.
Fitting: Please note: The inside cut edge of the opening is visible and should be laminated or finished accordingly. Please consult the website for more details on axxessPLUS fitting instructions.
FEATURES
Flush mounting brackets to allow perfect surface match
Brush strip to allow easy and safe exit for cables
DIMENSION A
DIM
ENSI
ON
B
Inside cut edge is visible and should be laminated orfinished accordingly
CL
AXXESSPLUS BRUSH PILE (SINGLE) LID
DIM
ENSI
ON
DIMENSION C
E
DIMENSIOND CL
AXXESSPLUS
Desk top
D E
2 GPO
Under desk
A B C
AXXESSPLUS CABLE FLAP (DOUBLE) LID
desk for mounting Insert required Under 4 OFF - M4 Threaded
182.00 110.00 223.00 20.50 80.00
4 GPO 262.00 110.00 303.00 20.50 80.00
AXXESSPLUS A B C D E
2 GPO 182.00 120.00 223.00 20.50 80.00
4 GPO 262.00 120.00 303.00 20.50 80.00
AXXESSPLUS QF25 EXPLODED VIEW
AXXESSPLUS QF45 EXPLODED VIEW
Every axxessPLUS QF25 chassis comes with 4 x 25mm cut outs to accept data. Data plate can be snipped out to accept any of the above configurations.
Optional back box
Optional back box
Elsafe umbilicals can be accommodated in either the chassis or the back for tidy cable management.
Every axxessPLUS QF45 chassis comes with 5 x 25.4mm cut outs to accept data. Data plate can be snipped out to accept any of the above configurations.
With the use of interconnecting blocks,
any combination of chassis can be
connected together to make an axxesPLUS box longer if required.
Special lids can be ordered accordingly.
5 X QF5 TILES
OR
1 X QF25 BLANK
OR
1 X QF25 2GP0
9 X QF5 TILES
OR
1 X QF25 2GP04 X QF5 TILES
OR
1 X QF45 4GP0
Inside cut edge is visible and should be laminated or finished accordingly
4 OFF - M4 Threaded Insert required Under desk for mounting
Cable guides at either end, guide the cables towards the lip, so that damage to the cables is avoided by scissor action of lid closing
AXXESSPLUS WITH CABLE FLAP
AXXESSPLUS WITH BRUSH STRIPCable guides at either end, guide the cables towards the lip, so that damage to the cables is avoided by scissor action of lid closing
Flush mounting brackets to allow perfect surface match
Spring release lid allows cables to exit while main lid is lowered.
axxess PLUS TECHNICAL