Ph: 1300 ELSAFE | www.oeelsafe.com.au | sales@oeelsafe.com.au

Frameless and perfectly flush, axxessPLUS is a top of the range in-desk solution from OE Elsafe.

Developed to satisfy the most discerning user, axxessPLUS maintains the superb finish of the most luxurious desks, whilst providing easy access to power, TUFA+C: TWIN USB FAST charging and data services.

AxxessPLUS features one lid, with either a cable flap or brush strip to facilitate cable feed, and is available in either non-veneerable (naturally anodised aluminium) or recessed to enable veneering to match the desk finish.*Single door with brush-strip option

axxess PLUS

Ph: 1300 ELSAFE | www.oeelsafe.com.au | sales@oeelsafe.com.au

AXXESSPLUS CUT-OUT AND FIXING DETAILS

Power and Data configuration (if applicable)Power only / Data only / Combined (Power & Data/AV).

Insulation: Reinforced insulation.

Testing:100% testing - continuity, polarity, insulation & earth.

Fitting: Please note: The inside cut edge of the opening is visible and should be laminated or finished accordingly. Please consult the website for more details on axxessPLUS fitting instructions.

FEATURES

Flush mounting brackets to allow perfect surface match

Brush strip to allow easy and safe exit for cables

DIMENSION A

DIM

ENSI

ON

B

Inside cut edge is visible and should be laminated orfinished accordingly

CL

AXXESSPLUS BRUSH PILE (SINGLE) LID

DIM

ENSI

ON

DIMENSION C

E

DIMENSIOND CL

AXXESSPLUS

Desk top

D E

2 GPO

Under desk

A B C

AXXESSPLUS CABLE FLAP (DOUBLE) LID

desk for mounting Insert required Under 4 OFF - M4 Threaded

182.00 110.00 223.00 20.50 80.00

4 GPO 262.00 110.00 303.00 20.50 80.00

AXXESSPLUS A B C D E

2 GPO 182.00 120.00 223.00 20.50 80.00

4 GPO 262.00 120.00 303.00 20.50 80.00

AXXESSPLUS QF25 EXPLODED VIEW

AXXESSPLUS QF45 EXPLODED VIEW

Every axxessPLUS QF25 chassis comes with 4 x 25mm cut outs to accept data. Data plate can be snipped out to accept any of the above configurations.

Optional back box

Optional back box

Elsafe umbilicals can be accommodated in either the chassis or the back for tidy cable management.

Every axxessPLUS QF45 chassis comes with 5 x 25.4mm cut outs to accept data. Data plate can be snipped out to accept any of the above configurations.

With the use of interconnecting blocks,

any combination of chassis can be

connected together to make an axxesPLUS box longer if required.

Special lids can be ordered accordingly.

5 X QF5 TILES

OR

1 X QF25 BLANK

OR

1 X QF25 2GP0

9 X QF5 TILES

OR

1 X QF25 2GP04 X QF5 TILES

OR

1 X QF45 4GP0

Inside cut edge is visible and should be laminated or finished accordingly

4 OFF - M4 Threaded Insert required Under desk for mounting

Cable guides at either end, guide the cables towards the lip, so that damage to the cables is avoided by scissor action of lid closing

AXXESSPLUS WITH CABLE FLAP

AXXESSPLUS WITH BRUSH STRIPCable guides at either end, guide the cables towards the lip, so that damage to the cables is avoided by scissor action of lid closing

Flush mounting brackets to allow perfect surface match

Spring release lid allows cables to exit while main lid is lowered.

axxess PLUS TECHNICAL