Engineered Membrane Solutions

AXEON CIP-Series Systems are designed to be used with any membrane system in order to clean the membraneswithout removing them from the system. AXEON CIP-Series Systems are provided with hoses and quick disconnectfittings to allow for easy connection to the membrane system.

Features� On/off switch � Stainless steel centrifugal pump � 5 micron cartridge filter � Filter Housings

� Polypropylene For: CIP – 100 – 10� Stainless Steel For: CIP – 200 – 15 to CIP – 500 – 30

� 316 stainless steel gauges � Quick Disconnect Fittings � Temperature Gauge � In-line flow meter � TEFC pump motor � Recycle loop with PVC valve � Solution Tank (polyethylene) with low level tank safe-guard � Flexible braided hose.

Options and Upgrades� Stainless Steel Immersion Heater � Solution Mixer � pH Monitor � Crating

AXEON Membrane Cleaning System Specifications

Cleaning SystemModel

Membrane HousingsCleaned in Parallel

Inlet Outlet(in/cm)

Tank Size(Gals/Lit)

Flow (GPM)

Min Max 60PSI 50PSI

Motor(HP)

Dimensions (in/cm)

Length Width Height

Weight(lb/kg)

CIP-100-10 4 x 4.0" or 1 x 8.0" 1.0 / 3.0 100 / 500 40 50 2 40 60 72 550 / 249

CIP-200-15 6 x 4.0" or 2 x 8.0" 1.5 / 4.0 200 / 760 60 75 5 50 60 72 600 / 270

CIP-200-20 3 x 8.0" 2.0 / 5.0 200 / 760 100 125 5 50 60 72 600 / 270

CIP-500-25 4 x 8.0" 2.5 / 7.0 500 / 1895 150 175 7.5 66 84 72 720 / 325

CIP-500-30 6 x 8.0" 3.0 / 8.0 500 / 1895 220 250 10 66 84 72 790 / 360

CIP-Series Clean In Place Systems

MKTF-200 AXEON is a registered trademark of AXEON Water Technologies. 02/12 ©2012 AXEON Water Technologies

P: 800-320-4074 • W: www.axeonwater.comF: 800-609-0829 • E: sales@axeonwater.com40980 County Center Drive, Suite 100, Temecula, CA 92591

AXEON_MKTF-200_CIP_PB_Page 1