Autodesk® Civil 3D® Country Kit Documentation SWEDEN
[Loc] Country Kit Documentation
Page 2 of 19
© 2019 Autodesk, Inc
Contents
1.0 Overview ......................................................................................................................... 3
1.1 Version History ............................................................................................................ 3
1.2 Introduction .................................................................................................................. 3
1.3 Standards used to create this Country Kit .................................................................... 3
1.4 Installation ................................................................................................................... 3
2.0 Country Kit Content ......................................................................................................... 4
2.1 Drawing template ......................................................................................................... 4
2.2 Layer Standard ............................................................................................................ 4
2.3 Pipe Catalog and Parts Lists ........................................................................................ 5
2.4 Pay Item File ................................................................................................................ 6
2.5 Export to Civil View for 3DsMax ................................................................................... 7
2.6 Infraworks Exchange Settings ...................................................................................... 8
2.7 Superelevation Design Criteria File .............................................................................. 9
2.8 Roundabout Design Criteria File .................................................................................10
2.9 Intersection Assembly Set ...........................................................................................12
3.0 Reports and Tools ..........................................................................................................13
3.1 Parcel, Pipe and Surface Reports ...............................................................................13
3.2 Volume Reports ..........................................................................................................15
3.3 Quantity Takeoff Reports ............................................................................................16
3.4 Swedish Tools – PXY Import ......................................................................................17
4.0 Country Kit Change List ..................................................................................................18
4.1 Template Updates.......................................................................................................18
4.2 Superelevation Design Criteria File – VGU 2015 ........................................................18
4.3 New subassembly .......................................................................................................18
[Loc] Country Kit Documentation
Page 3 of 19
© 2019 Autodesk, Inc
1.0 Overview
1.1 Version History
Versions of this document:
Version Date Update Description
1.0 4/15/19 Updated for Autodesk® Civil 3D® 2020
1.2 Introduction
This document describes the content and new of this Country Kit.
1.3 Standards used to create this Country Kit
This Country Kits is based on the following standards:
◼ Civil 3D Standard
◼ VGU 2005
◼ VGU 2012
1.4 Installation
The Country Kit is installed using the appropriate msi-file.
[Loc] Country Kit Documentation
Page 4 of 19
© 2019 Autodesk, Inc
2.0 Country Kit Content
2.1 Drawing template
The Country Kit contains a template file with settings for the local market:
_Autodesk Civil 3D 2020 SWE.dwt
Generally, styles named Standard should only be used if no other style of that type exist. If only
a style named Standard exist for a certain type, this style should however be used.
2.2 Layer Standard
The layer standard follows a Civil 3D “clear text” standard according to the image below.
[Loc] Country Kit Documentation
Page 5 of 19
© 2019 Autodesk, Inc
2.3 Pipe Catalog and Parts Lists
Pipe Catalog and corresponding parts lists are available at the locations below. User needs to
use command Set Pipe Network Catalog to set correct local catalog!
[Loc] Country Kit Documentation
Page 6 of 19
© 2019 Autodesk, Inc
2.4 Pay Item File
There is a localized Pay Item File located at the folder as
These Pay Item IDs are setup in some Pipe Network Parts Lists and some Code Set Styles
according to the second and third image below.
See section Quantity Takeoff Reports, below in this document for information on reports!
[Loc] Country Kit Documentation
Page 7 of 19
© 2019 Autodesk, Inc
2.5 Export to Civil View for 3DsMax
There is a localized Material Configuration File at location below:
[Loc] Country Kit Documentation
Page 8 of 19
© 2019 Autodesk, Inc
2.6 Infraworks Exchange Settings
There is a localized Exchange Settings Configuration File, for command
CONFIGUREAIWIMPORT, at location below.
Also note that settings in some Code Set Styles are setup for Infraworks communication.
Link Code Styles are coded with correct link style and render material for import to InfraWorks.
In InfraWorks, import using Style Rule "All.Rules.Json".
[Loc] Country Kit Documentation
Page 9 of 19
© 2019 Autodesk, Inc
2.7 Superelevation Design Criteria File
There is a new localized Superelevation Design Criteria File and the old version is also still
available.
[Loc] Country Kit Documentation
Page 10 of 19
© 2019 Autodesk, Inc
2.8 Roundabout Design Criteria File
There are two different localized Roundabout Design Criteria Files available. One for the “old”
command CREATEROUNDABOUT, see image 3 and 4 below, and one for the “new” AVT-
command RoundaboutCreate, see image 1 and 2 below.
[Loc] Country Kit Documentation
Page 11 of 19
© 2019 Autodesk, Inc
[Loc] Country Kit Documentation
Page 12 of 19
© 2019 Autodesk, Inc
2.9 Intersection Assembly Set
There is a localized assembly set located as in the image below. The assembly names are
translated but uses standard Civil 3D Stock Subassemblies.
[Loc] Country Kit Documentation
Page 13 of 19
© 2019 Autodesk, Inc
3.0 Reports and Tools
3.1 Parcel, Pipe and Surface Reports
Localized reports are available in the Toolbox as seen below.
[Loc] Country Kit Documentation
Page 14 of 19
© 2019 Autodesk, Inc
[Loc] Country Kit Documentation
Page 15 of 19
© 2019 Autodesk, Inc
3.2 Volume Reports
Localized Volume reports are available in a subfolder
[Loc] Country Kit Documentation
Page 16 of 19
© 2019 Autodesk, Inc
3.3 Quantity Takeoff Reports
Localized reports are available in the dropdown menu
[Loc] Country Kit Documentation
Page 17 of 19
© 2019 Autodesk, Inc
3.4 Swedish Tools – PXY Import
Localized tools are available in the Toolbox
[Loc] Country Kit Documentation
Page 18 of 19
© 2019 Autodesk, Inc
4.0 Country Kit Change List
4.1 Template Updates
◼ The following is a list of changes that have been made to the 2020 Template
◼ There is a new label style for crossings in profile view. In the Settings tab of the
prospector, switch to Master View. Under the Autodesk Metric template, open Profile
View>Label Styles>Crossing.
◼ There is a setting change in the Alignment Feature Settings, in the Settings tab right-
click on Alignment and choose Edit Feature Settings.... Expand Rail Alignment
Options and change both "Measure rail curves along chords" and "Export rail
alignment as center line alignment" to "Yes".
◼ There is a setting change in the Platform Edge Options, in the Settings tab open
Rail>Commands. Double-click on CreatePlatformEdge to open the "Edit Command
Settings - CreatePlatformEdge". Under "Platform Edge Options" change the "Use
Platform Length" to "No". Also, Track Width has been set to 1.435m.
◼ General>Multipurpose Styles>Projection Styles: Two new styles have been added.
◼ General>Multipurpose Styles>Code Set Styles: Some styles where modified
◼ Profile View>Band Styles>Superelevation>Tvärfall was modified and the Band Set
Vägverk also.
4.2 Superelevation Design Criteria File – VGU 2015
◼ There is a new Superelevation Design Criteria File, __Svensk regelbaserad
vägkonstruktion VGU2015_SWE.xml
◼ Superelevation Attainment Methods have been limited to only two, with or without
Spiral/Clothoid.
◼ VGU. Dubbelsidigt tvärfall. Raklinje-Klotoid-Cirkelbåge
◼ VGU. Dubbelsidigt tvärfall. Raklinje-Cirkelbåge
◼ Transition Length Tables:
◼ Rotationbredd <= 4,5m
◼ Rotationbredd 6,5m
◼ Rotationbredd 7m
4.3 New subassembly
◼ There is a new subassembly ShoulderExtendAllBySubbaseSlope_SWE
◼ Extends all layers by SubbaseSlope or Superelevation. Only Top layer follows
ShoulderSlope but without Superelevation!
[Loc] Country Kit Documentation
Page 19 of 19
© 2019 Autodesk, Inc
◼ C:\ProgramData\Autodesk\C3D 2020\enu\Imported
Tools\ShoulderExtendAllBySubbaseSlope_SWE
◼ C:\ProgramData\Autodesk\C3D 2020\enu\Imported Tools\Source\
ShoulderExtendAllBySubbaseSlope_SWE.pkt