720P,indoor vandal
WV-SF346
SVGA, indoor vandal
WV-SF342Business Solutions Division – Security Systems Group
WV-SF342/346 Overview
WV-SF332 WV-SF335 WV-SF336
- 800x600, 30fps
- Simple D/N
- Face Detection
- Focus Assist
WV-SF342 WV-SF346
Key Features Key Features
Real time HD/720P video with H.264 High Profile format High sensitivity: WV-SF342 : 0.2 lux @ color mode WV-SF346 : 0.3 lux @ color mode On-device analytics
- 720p/1280x960, 30fps
- Simple D/N
- Face Detection
- Focus Assist
IEC 60068-2-75** 0.14J 0.2J 0.35J 0.5J 0.7J 1J 2J 5J 10J 20J 50J
Free fall ( times ) 3 3 3 3 3 3 3 3 3 3 3
IEC 62262* IK01 IK02 IK03 IK04 IK05 IK06 IK07 IK08 IK09 IK10
Impact energy (J) 0.14J 0.2J 0.35J 0.5J 0.7J 1J 2J 5J 10J 20J
Free fall ( times ) 5 5 5 5 5 5 5 5 5 5
I*IEC 62262 (=originally defined in European Standard BS EN 50102:1995) Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
**IEC 60068-2-75:1997 (=JIS C 60068-2-75:2004) Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
WV-SF342/346: IEC 62262 => IK10
IEC 60068-2-75 test Eh, 20J
Body: Metal
Dome:Polycarbonate
Understanding Vandal Resistant Rating!** Panasonic defines the vandal resistant of a camera to be more than IK10(IEC62262). Verification: IEC 62262(IK10) and IEC 60068-2-75 test Eh, 20J impact resistance.
Test Equipment
Weight (5kg)SR50
Camera
5kg
0.4m×5 times by free fall
IEC 62262 IK10
0.4m
Camera
5kg
1.0m×3 times by free fall
IEC 60068-2-75 test Eh 5 0J
1.0m
Physical Model Comparions
124mm
135mm
83mmWV-NF302
129.5mm
WV-SF330 Series
80mm
93mm
73mm
BB-HCM705
62mm
111mm
132mm
WV-SF340 Series
83mm
105mm
Φ (mm) Height (mm) Dome (mm)
BB-HCM705 111 73 62
WV-NF302 124 135 83
WV-SF330 Series 129.5 93 80
WV-SF340 Series 132 105 83
WV-NW502S 192 146 105
192mm
105mm
146mm
WV-NW502S
Comparison –WV-SF340 and WV-SF330
SF340 Series SF330 Series
Vandal resistant
IEC 62262 : IK10
IEC 60068-2-75
test Eh, 20 J
IEC 62262 :
Less than IK07
Physical
size
Both models are very similar in specification regarding electrical and software, difference are in the mechanics
129.5mm
80mm
93mm
132mm
83mm
105mm
The SF340 series has an ability of vandal resistant more than 10 times compared with the SF330 series as below table.
IEC 62262* IK01 IK02 IK03 IK04 IK05 IK06 IK07 IK08 IK09 IK10
Impact energy (J) 0.14J 0.2J 0.35J 0.5J 0.7J 1J 2J 5J 10J 20J
Free fall ( times ) 5 5 5 5 5 5 5 5 5 5
Features
1.3 Megapixel RGB MOS Sensor ・ High sensitivity (Min. illumination: 0.3lux) ・ Low Power Consumption (Reduce 50% Power Consumption) ・ Superior Color Reproduction by Primary (RGB) Color Filter
Conventional CMOS image
New MOS image (reference)
Low Light Condition Image (Same illumination)
High sensitivity
Panasonic Imaging Technology
SF342SF342 SF346SF346
Panasonic MOS Sensor
Power
Consumption
Picture
Quality
Conventional
CCD Sensor
Conventional
CMOS Sensor
High
Low
Low
High
Panasonic
MOS Sensor
Panasonic developed a new original MOS sensor, and implement it in SP/SF series camera line.The sensor achieves both high sensitivity & low power consumption vs. CCD & CMOS sensors.
Panasonic
MOS Sensor
SF342SF342 SF346SF346
CMOS vs CCD Sensori-Pro 2nd Generation
Sensor CCDConventional
CMOS
Sensitivity Better Less
Fix Pattern Noise Lower Visible
Moving Object Distortion
No Visible
Smear Less (in case FIT) No
Power Consumption Higher Lower
Cost Higher Lower
・ CMOS can be higher density with lower cost and may be suitable for low cost market having low quality. ・ However for general surveillance purpose, CCD will be the best choice in total performance.
CCD Sensor
SF342SF342 SF346SF346
MOS vs CCD Sensori-PRO 3rd Generation
Sensor New MOS CCDConventional
CMOS
Sensitivity Much Better Better Less
Fix Pattern Noise Much Lower Lower Visible
Moving Object Distortion
Lower No Visible
Smear No Less (in case FIT) No
Power Consumption Lower Higher Lower
Cost Lower Higher Lower
・ Panasonic developed a new MOS sensor for high sensitivity with low noise ・ Currently for general surveillance purpose, new MOS sensor will be the best choice in total performance.
New
MOS Sensor
SF342SF342 SF346SF346
Panasonic LSI Technology UniPhier (Original System LSI)
・ Multiple H.264 High Profile Streams ・ Real Time HD Video Processing ・ On-device Intelligence Support
H.264 High Profile encoding with Panasonic Uniphier LSI enables
1280 x 960 high quality real time video with smaller data size.
* Superior image and high frame rate with smaller data size.
H.264 profiles
SF342SF342 SF346SF346
High DefinitionImproving Image resolution from standard definition to high definition.
* SP305/306 & SF335/336 support high definition.
Analog Camera
i-Pro SmartHD Camera
SF342SF342 SF346SF346
Progressive ScanProgressive video output ensures clear images with less motion blur and no tearing even when the subject is moving.
SF342SF342 SF346SF346
Wide Dynamic Range - 1Expanding dynamic range by tuning the gain control, gamma control and dark area calibration.
Wide Dynamic Range OFF Wide Dynamic Range ON
SF342SF342 SF346SF346
Understanding Wide Dynamic Process
Wide Dynamic Range Mechanism – WV-SF342/WV-SF346
1. Camera adjusts lens iris until bright area is saturated.
-> The areas that has less than normal brightness becomes darker. 2. The signals are amplified digitally until normal levels are reached in the
areas that became darker.-> Amplify signals even in bright areas up to 8 times.Note: Signal noise is increasing in dark areas, since it is without shutter control and it just amplifies signal in the dark areas.
3. Gamma is calibrated, included the knee characteristic, by amount of signal amplifying.-> It makes it possible to control bright areas and bright conditions.
4. Make image clear by accentuating contrast as well as dark area calibration.
Sensor Output Level
0
4095
(100%)
(800%)
0
32760
(100%)
(800%)
After new gamma
0
511
(100%)
After dark area calibration
0
255
(100%)
Area sense calibration
8 times
(800%)4095 (800%)
8 times Gain
8 times Gain(1)
Light Volume
Light Volume
Light Volume
Light Volume
(2)(3) (4)
SF342SF342 SF346SF346
Face DetectionThe camera can automatically detect up to 8 faces, transferring face information as XML data.This allows for development of custom applications such as WJ-NV200K NVR.
Automatic Face Detection
* Face detection is not handled as an alarm source.
SF342SF342 SF346SF346
Understanding Face Detection with WDR
The camera automatically detects a human face and makes brightness adjustments to provide better identification.
Wide Dynamic Range OFF Wide Dynamic Range ONFace Detection with Wide Dynamic Range
ON
Before CalibrationTo recognize a face, is can be difficult with backlighting conditions.The camera makes adjustments for the bright section (circled in blue).
After CalibrationThe overall brightness level is increased without causing saturation in the originally bright section (blue circle). Enhancing details in the face. (Blue square)
* When face detection with WDR works, it just adjusts dynamic range, and bright area may be saturated by light condition around a face.
SF342SF342 SF346SF346
Face Wide Dynamic Range Operation
Camera will automatically turn ON or OFF face WDR function when detecting human faces is present
WDR Setting
WDR : OFFFace WDR : OFF
WDR : ONFace WDR : OFF
WDR : ONFace WDR : ON
With Human Face
Without Human Face
Without human face, face wide dynamic range is not operated.
SF342SF342 SF346SF346
Face Matching – Operation w/WJ-NV200K
Position detection of human faces with face information is sent via XML data along with the video stream from the camera to the WJ-NV200K. It enables face matching to the stored data in real time.
Automatic Face Detection
1. Face registration
2. Detect the face
3. Recognize the face and send alarm
* Necessary to integrate with SmartHD Recorder (NV200 Series).* NV200 requires SXVGA resolution for face matching, so SF342 is excluded as cameras for face matching.
SF346SF346SF342SF342
High SensitivityImproved low light performance in darker conditions.
Conventional HD Camera
i-Pro SmartHD Camera
* SF346 support HD high sensitivity.
SF342SF342 SF346SF346
Lens ABF
* SF346 supports lens ABF function.
WV-SF346 has lens ABF function which improves installation time and accuracy.Lens ABF = one push “Auto Focus.”
SF342SF342 SF346SF346
After pushing “Execute”, focus adjustment will operated automatically.
Focus AssistFocus Assist is used is for easy, accurate and illumination independent focus adjustment.Focus assist is a physical lens adjustment made by the installer at the time of installation. The camera feeds back ideal setting of the lens when complete.
* SF342 support focus assist function.
After pushing “focus assist“ button, the focus indicator (below) will appear.
SF342SF342 SF346SF346
Adaptive DNR (Digital Noise Reduction)
2D-DNR for motion area and 3D-DNR for static area are effectively combined, realizing a clear low noise image with less motion blur and resolution deterioration.
SF342SF342 SF346SF346
H.264 Latest Encoding Technology Enables:
“Superior image of 1280 x 960 with smaller data size”
* This allows better image quality within the limited network/disk capacity.
“Superior image of 1280 x 960 allowing higher frame rates and efficient bandwidth usage”
* This allows faster frame rate within the limited network/disk capacity.
H.264 Latest Encoding Technology Enables:
H.264 Latest Encoding Technology Enables:
“Superior image of 1280 x 960 having smaller data size for longer archiving”
* This allows longer recording time within the limited disk capacity.
Frame Rate Priority ModeFrame rate priority mode dynamically controls bit rate depending on the subject to maintain the frame rate.
SF342SF342 SF346SF346
* This mode does it’s best to maintain a constant frame rate but it cannot always be guaranteed.
Multiple Streaming – 4:3 ratioTriple streams(4:3 aspect ratio) including JPEG and H.264(2ch) or MPEG4(2ch) can be transmitted simultaneously, enabling both real time monitoring and high quality recording.
H.264(1) : 1280x960 or VGA or QVGA
H.264(2) : VGA or QVGA
JPEG
MPEG-4(2) : VGA or QVGA
MPEG-4(1) : VGA or QVGA
Real Time Monitoring
30fps Recording
High Resolution Recording
* In case of SP302 & SF332, it supports 800x600 instead of 1280x960 resolution.
* When motion stream 1 is H.264 or MPEG-4, motion stream 2 must be H.264 or MPEG-4 (same compression type). Total bit rate must be less than camera’s max performance. Detail of the streaming combination is under study.
Up to 5fps@1280x960
Up to 30fps
@1280x960
Up to 30fps@VGA
SF342SF342 SF346SF346
Multiple Streaming – 16:9 ratio
Triple streams(16:9 aspect ratio) including JPEG and H.264(2ch) can be transmitted simultaneously, enabling both real time monitoring and high quality recording.
H.264(1) : 1280x720 or 640x360
H.264(2) : 640x360
JPEG
320x180
320x180
Real Time Monitoring
30fps Recording
High Resolution Recording
* In case of SP302 & SF332, it does not support 1280x720 resolution.
* Total bit rate must be less than camera’s max performance. Detail of the streaming combination is under study.
Up to 5fps@1280x720
Up to 30fps
@1280x720
Up to 30fps@640x360
SF342SF342 SF346SF346
SD Memory RecordingSD/SDHC Memory card slot for:1. Manual recording (H.264/JPEG),2. Alarm recording (H.264/JPEG)3. Backup upon network failure (JPEG).
SD Memory Setup
1. Select image format•JPEG•H.264*In case selecting H.264, H.264 (2) streaming is used only for SD memory recording. In case using recorder backup upon network failure, select JPEG.
2. Select recording mode•JPEG :Manual REC/Alarm REC (Post)
/Backup upon network failure (FTP error)•H.264 :Manual REC/Alarm REC (Pre/Post)
3. Select recording setting•Resolution :
4:3 mode :1280x960/VGA/QVGA16:9 mode:1280x720/640x360/320x180
•Frame Rate/Bit Rate* In case of H.264, the setting for H.264(2) will be changed to the SD memory recording setting.
4. Select data size setting in pre/post alarm for H.264•Pre-Alarm :ON (data size: up to 2Mbps)/OFF•Post-Alarm:10s – 300s
*In case of H.264, video data is recorded in the MP4 encoding format.
SF342SF342 SF346SF346
Video Motion DetectionObject motion in the specified areas can be detected, triggering an alarm action.Up to 4 areas can be registered. Finer tuning is possible with area and sensitivity adjustment.
SF342SF342 SF346SF346
Flexible alarm handling
SF342SF342 SF346SF346
Alarm Source (Input)
Alarm Action (Output)
PoE (Power over Ethernet)Both power and image data can be transmitted through a signal Ethernet cable.By eliminating the need for power cables and supplies when installing cameras or
changing layouts, installation and maintenance costs are reduced.
SF342SF342 SF346SF346
Bi-directional AudioFull duplex bi-directional audio allows interactive communication between camera site and monitoring site.
* G.726 (ADPCM) 32 kbps mode only.
SF342SF342 SF346SF346