AHT Energy industrywww.aht.com.ph
ARO Building - unit 3A-2, Victor Buencamino Street, Barangay Almanza I, LasPiñas City, Philippines/ [email protected]/ Tel:+63(2)737 9300/ Fax: +63(2)737 9301
1.Commercial Energy Storage Solution
● For companies, factories, commercial offices, charging stations and
other places that use large amounts of electric power and have large load
fluctuations or other places with large electric price differences between peak
and regular usage, the installation of an energy storage system will have a
major impact. The energy storage system can perform load shifting according
to high and low electricity pricing to stabilize the power grid and take advantage
of price differences; during power grid blackouts it can switch quickly to off-grid
power supply to implement emergency power supply to ensure important loads
continue to operate; as load requirements increase, the energy storage system
makes it easier scale the power supply system and to smooth out the load
impact thus saving of the investment costs of rewiring and transformer scaling
in applications such as electric vehicle charging stations or scaling old power
distribution systems, etc.
● Recommended products: PCS500K-A, PCS250K-A, PCS100K-A, etc.
● Applications: industrial companies, data centers, charging stations, etc.
● Solution features:
Load shifting: increases company profitability;
Emergency power supply: can be used to replace fire emergency
power supply (EPS) to save on system investment costs;
Smart monitoring: remote monitoring, highly automated operation.
AHT Energy industrywww.aht.com.ph
ARO Building - unit 3A-2, Victor Buencamino Street, Barangay Almanza I, LasPiñas City, Philippines/ [email protected]/ Tel:+63(2)737 9300/ Fax: +63(2)737 9301
2.Frequency and Voltage Modulation System
Solution
Large fluctuations in frequency and voltage in local power grids occur whensteel mills, glass factories, and other applications require large bursts of electricpower. This usually leads to an unstable power grid which affects the stability of other electrical equipment. In these situations, the addition of an energy storage system to the power grid can satisfy the requirement for quick response to sudden frequency and voltage changes and handle short term load power changes. Since the energy storage system only needs to handle power regulation for short periods of time, super capacitors or other power batteries can be used for short term energy storage.
Applications: primary power grid frequency and voltage modulationSolution features:Instant implementation of primary frequency modulation, secondary
frequency modulation can also be implemented;Effectively improves power grid frequency and amplitude stability;Fast dynamic response speed.
Recommended products: PCS500K-B, PCS1000K-B, etc.
AHT Energy industrywww.aht.com.ph
ARO Building - unit 3A-2, Victor Buencamino Street, Barangay Almanza I, LasPiñas City, Philippines/ [email protected]/ Tel:+63(2)737 9300/ Fax: +63(2)737 9301
3. Micro‐grid Energy Storage Solution● Micro-grid power distribution systems are formed from distributed power
sources, energy storage devices, energy conversion devices, related loads as
well as monitoring and protection devices. They are usually used in low and
medium voltage power distribution networks and involves many types of energy
devices to provide clean, efficient and stable electric power to loads.
● Solution features:
Ensures emergency power supply for various small ecosystems; isolated
island operation can also be implemented;
Highly permeable renewable energy can be introduced making it
environmentally friendly;
Customized photovoltaic, fuel power generation, and storage solutions
based on local conditions; better economic efficiency can be implemented;
High efficiency energy management; remote monitoring and highly
automated operation can be implemented.
● Recommended products: PCS500K-B, SPI500K-B, energy management
system
AHT Energy industrywww.aht.com.ph
ARO Building - unit 3A-2, Victor Buencamino Street, Barangay Almanza I, LasPiñas City, Philippines/ [email protected]/ Tel:+63(2)737 9300/ Fax: +63(2)737 9301
4.Wind and Solar Curtailment Solution
Since renewable energy generation is only possible at certain times andis volatile and unpredictable, its large-scale inclusion will introduce adjustment difficulties to power grids and large-scale wind and solar curtailment problems can also occur. The addition of energy storage solution to renewable energy generation solves this problem. By storing the unused energy and releasing it back during times of peak energy usage, the objective of smooth power delivery is achieved, and the problem of the instability in renewable energy generation is solved while waste is prevented.
Applications: locations with renewable energy generation limitations Solution features:
Reduces the effects of wind and solar curtailment, improveseconomic benefits;
Improves grid power generation stability and planning; Improves power grid scheduling.
Recommended products: PCS500K-B, PCS1000K-B, etc.
股票代码:002335 集约高效 智能领跑
储能 /微网产品手册
Energy Storage/Micro-grid Product Brochure
2
1
专注电力电子技术 30 年30 years' power conversion experience
累计装机容量数值超过 10GW+10GW+ accumulated solar installations
worldwide
研发人员 900+,占员工比 25%+Over 900 R&D engineers, 25% of all employees
研发投入逾 2 亿,占营收近 9%More than 200 million of R & D investment,
accounting for nearly 9% of revenue
连续三年入选全球新能源企业 500 强Awarded as the world's top 500 new energy
companies for 3 years
服务于全球 100+ 国家和地区Applied in 100+ countries and regions
600+ 项国家专利软件、著作权等知识产权600+ intellectual properties including software
patents, copyright and etc
参与国家和行业标准的制定 60 余项Participated in the formulation of more than 60
national and industry standards
4
储能电池箱
并网系列产品 On-grid series products
系统配件产品 System accessories products
2
Energy Storage/Micro-grid Product Brochure
三相储能变流器(隔离型)Three-phase energy storage
converter (isolated type)BCS50~500K-A
三相储能变流器(非隔离型)Three-phase energy storage converter (non-isolated type)
BCS250~630K-B
集装箱储能变流器Containerized energy storage
converterBCS1000K~1260K-B
单相光伏储能逆变器Single-phase PV energy storage
inverterSPH3000~5000-B/BL
储能升压一体系统Inverter & Step-up Transformer
ContainerBCS1000K~1260K-T
EMS 能量管理柜
防逆流控制器Anti-counter current controller
SPA1000
EMS 能量管理系统EMS (Energy Management System)
cabinet
箱式储能系统Containerized energy storage
system
离并网切换柜系列On-off-grid switchover cabinet
STS-100K~1000K
5
离网系列产品 Off-grid series products
产品Products
单相离网控制逆变一体机Single-phase off-grid
integratedcontroller &inverterSPO1000~12000-M060~400
单相离网控制逆变一体机Single-phase off-grid
integratedcontroller &inverterSPO3120~50-M075~150
单相光伏离网逆变器(非隔离型)Single-phase off-grid inverter (non-
isolated type)DJN1000~5000-SPO
光伏 MPPT 控制PV MPPT ontroller
SPC048100~SPC048200-M
光伏 MPPT 控制器PV MPPT ontroller
SPC220300~ SPC384300-M
三相光伏离网逆变器(隔离型)Three-phaseoff-grid inverter
(isolated type)FR-UK10K~600K-SPO-A
三相离网控制逆变一体机Three-phase off-grid integratedcont
rollercontroller&inverterSPO3310~50-M075~225
Energy Storage/Micro-grid Product Brochure
8
Three-phase Energy Storage Converter (Isolated Type)
Product Features
Function Diagram
2-1
BCS50~500K-A
Battery Management
• With bidirectional converter to charge or discharge batteries• Optional modes for charging, including pre-charging,
constant current charging, equalized charging and floating charging
• Discharging can be realized in modes of either constant power discharging or constant current discharging
Power Grid Adaptability
• Meeting the smart grid design specification and allowing power grid dispatching
• Advanced islanding detection technology • Reactive power compensation and other functions • Independent inverting function of microgrid system
System Characteristics
• Completely isolation of batteries from the power grid • Smart interface and communications• Charging and discharging time setting for 16 segments, better
for customer's on-site applications • On/off grid switching time: general conditions <200ms; zero
transition can be achieved under specific conditions (external connection of SCR)
• Four periods of time (peak, flat, valley and sharp) price setting, flexible calculation of user profitability
9
ItemIndex BCS50K-A BCS100K-A BCS250K-A BCS500K-A
DC parametersMaximum DC power 57.6kW 114.1kW 282.9kW 558.4kW
DC voltage range 200Vdc -600Vdc 500Vdc ~900VdcMax. DC Current 288A 228A 566A 1117A
DC side buffering With automatic buffering functions
On-grid output parametersRated power 50kW 100kW 250kW 500kW
Rated voltage of interconnected grid 400VacGrid voltage range 340-460Vac(settable)
Rated power grid connection frequency 50Hz/60Hz 50Hz/60Hz 50Hz/60Hz 50Hz/60HzMax. AC Current 79A 159A 397A 794A
PF adjustable range 1 (leading)~1 (lagging)THDi <3% (at rated power)
Overload capacity 110% for long term operation;
Off-grid output parametersRated output voltage 400Vac
Output voltage precision 1%Max. AC Current 79A 159A 397A 794A
Voltage distortion <1% (linear load); <5% (non-linear load)Rated output frequency 50Hz/60Hz
Overload capacity 110% for long term operation;Output power factor >0.99
Dynamic voltage stability and recovery time 5%&40 ms
Peak factor >3:1
OthersMaximum efficiency 95.5% 96.4% 97.2% 98.5%Level of protection IP20
Allowable ambient temperature -25℃ ~+55℃Cooling mode Forced air cooling (adjustable speed by fan)
Relative humidity 0~95% (no condesation)Maximum operating altitude 6000m (>4000m derating)
Dimensions (W × D× H) 800×800×1800mm 800×800×1800mm 1000×800×2000mm 1400×1000×2000mmWeight 630kg 730kg 1600kg 2200kg
BMS communication RS485, CANDispatching communication mode RS232/RS485 (standard), Ethernet, GPRS (optional)
* Specification indexes may be subject to changes without further notice.
Technical Specification
产品Products
12
2-1
Three-phase EnergyStorage Converter (Non-isolated Type)BCS250~630K-B
Product FeaturesBattery Management
• With bidirectional converter to charge or discharge batteries• Optional modes for charging, including pre-charging,
constant current charging, equalized charging and floating charging
• Discharging can be realized in modes of either constant power discharging or constant current discharging
Power Grid Adaptability
• Advanced islanding detection technology • Low voltage ride-through capacity, reactive power
compensation and other functions • Independent inverting function of microgrid system
System Characteristics
• Positive maintenance, reliable wall mounting and minimization of equipment occupation space
• Wide DC working voltage range• Perfect display and communications• Compact size, light weight, easy for installation on the site• Supporting multi-unit parallel connection function, expandable to
MW power level• Single machine system is able to independently manage the peak
load shifting in the operation without EMS system
Function Diagram
13
Technical Specification
产品Products
ItemIndex BCS250K-B BCS500K-B BCS630K-B
DCparametersMaximum DC power 278kW 556kW 700kW
DC voltage range 500-900Vdc 535-900VdcApplicable range of charging/
discharging current 556A 1111A 1200A
DC side buffering With automatic buffering functions
On-grid output parametersRated power 250kW 500kW 630kW
Rated voltage of interconnected grid 315Vac 360VacGrid voltage range 268-362(settable) 306-414(settable)
Rated power grid connection frequency 50Hz/60HzRated AC current 504A 1008A 1111A
PF adjustable range 1 (leading)~1 (lagging)THDi <3% (at rated power)
Overload capacity 110% for long term operation;
Off-grid output parametersRated output voltage 315Vac 360Vac
Output voltage precision 1%Maximum AC current 593A 1186A 1200A
Voltage distortion (THDv) <1% (linear load); <5% (non-linear load)Rated output frequency 50Hz/60Hz
Overload capacity 110% for long term operation;Output power factor ≥ 0.99
Dynamic voltage stability and recovery time 5%&40 ms
Peak factor >3:1
OthersMaximum efficiency 98.85% 99.00% 99.00%Level of protection IP20
Allowable ambient temperature -35℃〜 60℃Cooling mode Forced air cooling ( intelligent fan speed control)
Relative humidity 0~95% (no condensation)Maximum operating altitude 6000m (>4000m derating)
Dimensions (W × D× H) 1000×800×2000mm 1100×800×2000mm 1100×800×2000mmWeight 900kg 1000kg 1000kg
BMS communication RS485, CANDispatching communication mode RS485 (standard), Ethernet
* Specification indexes may be subject to changes without further notice.
16
DC-DC ConverterSPT250K-H
Product FeaturesExcellent Performance
• Max. efficiency up to 99%• Bi-directional energy flow, charge and discharge energy
storage devices with one unit• Ethernet/IP communication interface, to integrate into other
automation networks• Compact footprint, space-saving design due to excellent
mechanical design
Advanced Technology• Full digital control technology, higher data processing
accuracy & speed• Optimized circuit with highly integrated design to make the
performance more stable• High switching frequency, Low current ripple and high-
voltage quality• Advanced parallel expansion technology, single /parallel
system compatible
High Reliability
• International top-class brands of major components and redundant design for critical circuits
• Large allowance for power module, strong protection for short circuit• Strengthen PCBs coating: Anti salt spray, anti corrosion, anti moisture,
anti dust, etc
Function Diagram
BUS
SPDPE
DC circuit breaker
F1
F2
DC buffer
DC EMI filter
Bus capacitance
Conversion circuit
DC EMI filter
DC buffer
F1
F2
Battery
DC circuit breaker
Bus capacitance
17
Technical Specification
ItemIndex SPT250K-H
Power ParametersMax. input Power 275kW
Rated input Power 250kW
PV/BUS ParametersPV/BUS Voltage Range 310~1425V
Full Load Voltage Range 700~1425VMax. Working Current 357A
Battery ParametersBattery Voltage Range 310~1425V
Full Load Voltage Range 700~1425VMax. Working Current 357A
EfficiencyMax. efficiency 99%
General dataDiamension (W × H × D) 800×2000×800mm
Weight 500kgIP grade IP20
Operation temperature -30~60℃ (>55℃ derating)Cooling type Forced air cooling
Relative humidity 0~95%, non condensationAltitude 6000m (>4000m derating)Display LCD
Communication RS485, Ethernet, CANParallel Fuction Multi-parallel
* Specifications are subject to change without prior notice.
20
2-1
Container Energy Storage ConverterBCS1000K~1260K-B
Product Features
• Standard container design, integrated fire fighting, lighting, heat dissipation, etc.
• Protection rating of IP54, suitable for extreme outdoor environment
• Front end maintenance of converter, convenient for installation, operation and maintenance
• Multi -unit parallel connection technology, convenient expansion
• On/off grid switching function • Low voltage ride-through capacity, reactive power
compensation • Meeting the smart grid design specification and allowing
power grid dispatching
Function Diagram
21
Technical Specification
产品Products
ItemIndex BCS1000K-B BCS1260K-B
Maximum DC power 1100kW 1400kWRecommended DC voltage 672Vdc
Maximum DC current 1111A*2 1200A*2Applicable range of charging/
discharging current 20A~2000A 20A~2000A
DC voltage range 500Vdc 〜 900Vdc 535Vdc 〜 900VdcDC Voltage Ripple 2%Rated AC voltage 315Vac 360Vac
Maximum efficiency 99%
On-grid modePhase voltage range 900%UN ≤ U ≤ 110%UN (settable)
Frequency range 49.5Hz~50.2Hz (settable)PF adjustable range 1 (leading)~1 (lagging)
THDi <3% ( at rated power )
Off-grid modeVoltage accuracy ±1%Rated frequency 50HzPeak factor ratio ≥ 3:1
Resistive load overload capability 110% for long term operation;Power factor 0.99
Degree of output voltage unbalance ±2%Output dynamic voltage stability ±5%
Rated parametersRated AC output power 1000kW 1260kW
Maximum AC power 1100kVA 1386kVARated AC current 2016A 2222A
Mechanical partDimensions (W × D× H) 2438×1990×2591mm
Weight 4600kg
Environmental conditions and safetyLevel of protection IP54
Cooling Air coolingAmbient temperature -35℃ ~60℃
* Specification indexes may be subject to changes without further notice.
24
2-1
Single-phase PV Energy Storage InverterSPH3000~5000-B/BL
Product Features
• Easy installation and suitable for outdoor use (BL model)• Super silence design, noise <25dB • Maximum efficiency: 97.8%• Ultra wide MPPT range: 125Vdc - 580Vdc• Full automatic control, easy and simple operation• APP can control the state of the system in real time• Smart battery management function, flexibly compatible
with multiple types of energy storage batteries• Wall mounted and rack installation (optional)
Function Diagram
25
Technical Specification
产品Products
ItemIndex SPH3600-BL SPH5000-BL
DC inputMaximum PV array power 4000W 5500WMaximum PV array open-
circuit voltage 600Vdc
MPPT voltage range 125-580VdcMaximum input current 11X2Adc
Number of MPPT circuits / Input circuits 2/2 (parallel connection is available)
On-grid outputRated power 3600W 5000W
Rated output voltage 220/230/240VacVoltage range of
interconnected grid 184~265Vac
Frequency range of interconnected grid 47.5Hz~52.5Hz/ 57.5Hz~62.5Hz
Rated output current 15.7A 21.7APower factor > 0.99 (±0.8, adjustable)
Maximum efficiency 97.80%European efficiency 97.20%
THDi <1.5% ( at rated power )
Battery inverter (emergency mode)Rated output voltage 220/230/240Vac
Output frequency 50(60)±0.5HzOutput power 2500W/3500VA
Switchover time 6msVoltage harmonic <2%(linear load)
Charge/DischargeRated voltage 48Vdc
Maximum charging power 2500W (settable)Maximum charge current 50 A (settable)
Maximum discharge power 2500WMaximum discharge current 60AAccumulator configuration
type Ferric phosphate / three-element lithium / lead acid / lead carbon
SystemInstallation mode Wall hanging
Level of protection IP65Cooling mode Natural air cooling
Noise <25dBHuman-machine interface LED/Cloud monitoring mobile APP
Relative humidity 0 ~ 90%, no condensationWorking temperature -25° C~+60° CInstallation altitude 0~3000m
Grid connection standard VDE0126-1-1, VDE-AR-N4105,G83/2, G59/3, AS4777.2/.3, ERDF, Safety regulation IEC62109-1, IEC62109-2, AS62040-1-1
EMC EN61000-6-3, EN61000-6-2Communication interface RS485 (standard, Modbus protocol) /WiFi (optional) /GPRS (optional)
Optional components DC switch, CT, electric meterDimensions (W × D× H) 480×420×185mm
Weight 25kg
* Specification indexes may be subject to changes without further notice.
28
2-1
Energy Storage & Step-upTransformer Container SystemBCS1000K~1260K-T
Product features
• Integrated converter, step-up transformer (10kV/35kV), medium voltage distribution, convenient operation and maintenance
• Optimized converter and step-up transformer with lower system losses
• Container design, convenient for transportation and installation
• Meeting the smart grid design specification and allowing power grid dispatching
• Low voltage ride-through capacity, reactive power compensation
• Independent inversion function of microgrid• Outdoor application design, protection level IP54, good
environmental adaptability
Function Diagram
29
产品Products
Technical Specification
ItemIndex BCS1000K-T BCS1260K-T
DC parametersMaximum DC power 1100kW 1400Nominal DC voltage 672Vdc
Applicable range of charging/discharging current 20A~2000A 20A~2354A
DC voltage range 500Vdc 〜 900Vdc 535Vdc 〜 900VdcDC buffer With DC buffering function
On-grid OutputRated output power 1000kW 1260kW
Rated voltage 10kV/35kVVoltage range 90%UN<U<110%UN (settable)
Frequency range 49.5Hz~50.2Hz (settable)PF adjustable range 1 (leading)~1 (lagging)
THDi <3% ( at rated power ) Transformer Optional oil transformer or dry transformer
EfficiencyMaximum efficiency 97.7% 98%
On-grid discharging efficiency 97.5% 97.8%On-grid charging efficiency 97.5% 97.8%
Off-grid discharging efficiency 97.5% 97.8%
OthersLevel of protection IP54
Ambient temperature -25℃〜 55℃Noise < 75dB
Dimensions (W × D× H) 2438x 6095x 2591mmCommunication interface RS485, Ethernet, optical fiber
* Specification indexes may be subject to changes without further notice.
32
2-1
ContainerizedEnergy Storage System
Product Features• High system integration, integrated battery management system, PCS temperature control system, fire control system, door access
system, data monitoring system, AC and DC power distribution, lighting system and so on• Customizable design, meeting different needs• Three- level BMS system architecture, safe and reliable• Optional modes for charging, including pre-charging, constant current charging, equalized charging and floating charging• On-off fast switching function from the network, with switching time less than 15ms• Supporting local and remote monitoring• The automatic Hexafluoropropane automaticfire extinguishing system, in line with fire safety regulations
On/off grid cabinet Li Battery Pack Fire fighting
Temperature control systemPCS EMSAccess control
33
产品Products
Technical Specification
Battery group (LFP)Module 32V 148Ah(10S4P)
Battery cabinet 736V 148Ah(23S1P)System 1.96MWh
Conventional charging/discharging current of the system 0.5C
Maximum charging/discharging current of the system 1C
Efficiency of battery system 95%Battery life 3500 times
Energy-storage converterRated power 500kW
AC side rated voltage 400VacRated frequency 50/60Hz
PF adjustable range 1 (leading)~1 (lagging)THDi <3% ( at rated power )
SystemCharging overvoltage protection Yes
Discharging undervoltage protection YesOn/off grid switching operation function Yes
Reactive power compensation YesLow voltage ride through Yes
Automatic fire fighting system YesTemperature control system Yes
Access control system YesMonitoring system Yes
Ventilation and lighting system Yes* Specification indexes may be subject to changes without further notice.
35
Single-phase Off-grid Integrated Controller & InverterSPO1000~12000-M060~400
* Specification indexes may be subject to changes without further notice.
Product Features• three-in-one integrated off-grid system, PV MPPT controller + AC charging
(optional) + inverter• Modular design of PV MPPT controller, supporting hot plug, plug and play and
flexible configuration• Multi channel MPPT design, efficiency up to 99.8%, improving the system power
generation • Frame design, front operation, post connection• Some types of equipment support diesel generator /automatic bypass of
municipal cities, without additional configuration of ATS• With load management function, secondary loop of primary/secondary loads • Supporting lithium battery and battery access, and dry contact communication
with BMS• Perfect protection function, with overvoltage/undervoltage alarm of batteries,
battery overvoltage / undervoltage protection, output overcurrent alarm, output overcurrent protection and PV input overcurrent alarm
Technical SpecificationItem
Index SPO1000~12000-M060~400
DC input parametersComponent input voltage range 50Vdc~150Vdc
MPPT circuit numbers 1/2 4~8Component input power 2.88kW/5.76kW 9.6kW~19.2kW
Rated battery voltage 48VdcBattery type Lithium batteries or lead-acid batteries
AC output parametersOutput power 1kVA 2kVA 3kVA 5kVA 6kVA 9kVA 12kVA
Invert efficiency 86% 90%Peak coefficient 3:1
Power factor 0.7Output voltage 220±1%Vac
Output frequency 50±0.1o%HzOverload capacity 105~125% It continues for at least 60s, 126 ~ 150%. The load shall last for at least 1s.
OthersCommunication mode RS485、RS232、Dry contact
Noise <40dBAmbient temperature -20℃ ~+40℃
Relative humidity 0~95%Operating altitude 3000m
Dimensions (W × D × H) 600×600×1000mm 600×600×1800mmLevel of protection IP20
产品Products
37
Single -phaseOff-grid Integrated Controller & InverterSPO3120~50-M075~150
* Specification indexes may be subject to changes without further notice.
Product Features• PV MPPT controller + inverter, integrated off-grid system design• PV MPPT control modular design, supporting hot plug and play, plug and play, flexible
configuration• Wide MPPT range: 420 ~ 850V• Multi -circuit MPPT design, efficiency up to 99.8%>, improve system power generation• Output with isolated transformer, with good impact resistance and short circuit
protection• Liquid Crystal Display (LCD)• Supporting lithium battery and battery access, and dry contact communication with BMS• Supporting automatic bypass of municipal power supply without additional
configuration of ATS• Equipped with manual maintenance bypass (oil machine/municipal power supply
access) function and intelligent error proofing design
Technical SpecificationItem
Index SPO3120~50-M075~150
DC input parametersComponent input voltage range 420Vdc~850Vdc
MPPT circuit numbers 1/2Component input power 26kW/52kW
Rated battery voltage 348VBattery type Lithium batteries or lead-acid batteries
AC output parametersOutput power 20kVA 30kVA 40kVA 50kVA
Peak coefficient 3:1Power factor 0.8
Output voltage 220±1%VacOutput frequency 50±0.5%Hz
Waveform Sine wave, THD<3% (linear load)Overload capacity 105~ 125%, continuing for no shorter than 1min
OthersWeight 303kg 325kg 373kg 404kg
Communication mode RS485, dry contactNoise 65dB
Ambient temperature -5° C 〜 +40° CAllowable relative humidity range 0~95% (no condesation)
Operating altitude 3000mDimensions (W × D × H) 1000×800×1180mm
Level of protection IP20
产品Products
39
Three-phase Off-grid Integrated Controller & InverterSPO3310~3350-M075~225
Product Features• Integrated system, PV MPPT controller + AC charging (optional) + inverter • Modular design of PV MPPT controller, supporting hot plug, plug and play and
flexible configuration• Wide MPPT range: 420 ~ 850V• Multi-circuit MPPT design, MPPT efficiency up to 99.9%, improving system
power generation• Output with isolation transformer, strong resistance to load impact• Supporting three-phase 100%. Unbalanced load• With manual maintenance bypass function and intelligent error proofing design• Multi-mode fan intelligent speed regulation, prolonging fan service life• Smart battery charging and discharging management, which can guarantee the
battery service life• Supporting diesel generator / automatic bypass function from municipal supply
without additional ATS configuration
Technical SpecificationItem
Index SPO3310~3350-M075~225
Input parametersComponent input voltage range 420Vdc~850Vdc
MPPT circuit numbers 1/2/3Component input power 26kW/52kW/78kW
Rated battery voltage 348VdcBattery type Lithium batteries or lead-acid batteries
Output parametersOutput power 10kVA 20kVA 30kVA 40kVA 50kVA
Peak coefficient 3:1Power factor 0.8
Output voltage 380±1%VOutput frequency 50Hz/60Hz±0.1%
Waveform Sine wave, THD<2% (linear load)Overload capacity 105 ~ 125%, continuing for at least 10min ~ 126 ~ 150%, continuous loads for at least 1min.
OthersWeight 330kg 360kg 380kg 520kg 570kg
Communication mode RS485, dry contactNoise <65dB
Ambient temperature -5° C~+40° CAllowable relative humidity range 0~95% (no condensation)
Operating altitude 3000mDimensions (W × D × H) 850×800×1600mm
Level of protection IP20* Specification indexes may be subject to changes without further notice.
产品Products
41
Single-phase Off-grid Inverter (Non-isolated Type)DJN1000~5000-SPO
Product Features
• 1kVA/2kVA/3kVA/5kVA series products available • Advanced IGBT devices with high reliability• DSP based full digital control technology to achieve a variety of
intelligent control functions• Perfect protection function and higher reliability of the system • RS232 and RS485 data communication with computers for
monitoring operation status• Nice appearance, perfect function, friendly man-machine interface• Impact loads such as air conditioning and refrigerator can be started
Technical SpecificationItem
Index 1000 2000 3000 5000
DC inputRated DC input current 17A 34A 50A 80A
DC voltage 48VdcDC voltage range 40Vdc~57Vdc
AC outputRated capacity 1000VA 2000VA 3000VA 5000VA
Rated power 700W 1400W 2100W 3500WOutput voltage 220±3%Vac
Rated output current 4.5A 9.0A 13.6A 22.7APower factor 0.7
Frequency 50±1%HzTHDi THD<3% (linear load)
Dynamic response (load 0-100%) 10%Overload capacity 105 ~ 125%, continuing for at least 605, and 126 ~ 150% loads continue for at least 1s
Peak coefficient 3:1Inverter efficiency 86% 90%
OthersAmbient temperature -20° C 〜 +40° C
Level of protection IP20Altitude >1500m (derating)
Dimensions (W × D× H) 440×286×43.5mm 440×350×88mm 440×440×132mmWeight 5.0kg 9.5kg 13.5kg
Communication interface RS232/RS485* Specification indexes may be subject to changes without further notice.
产品Products
43
Three-phase Off-grid Inverter (IsolatedType)FR-UK10K~600K-SPO-A
Product Features• Equipped with manual maintenance bypass (oil machine/municipal
power supply access) function and intelligent error proofing design• With the function of battery polarity reverse protection• Dual DSP digital control: the whole machine features high control
accuracy, timeliness and high integration• Intelligent fan speed regulation and fault detection, prolonging fan
service life• Complete battery management function: the system has a perfect
battery management function to ensure battery service life• The structure is of a modular design with high power density• Self-adaptive master-slave-free technology, improving power supply
reliability
Technical SpecificationItem
Index 10 20 30 40 50 60 80 100 120 160 200 250 300 400 500 600
Input parametersDC voltage 348 Vdc 384 Vdc
AC input 380 VacBack-up input power
supply Accessible to municipal power supply or diesel generators
Output parametersCapacity (kVA) 10kVA 20kVA 30kVA 40kVA 50kVA 60kVA 80kVA 100kVA 120kVA 160kVA 200kVA 250kVA 300kVA 400kVA 500kVA 600kVA
Output power factor (PF) 0.9
Voltage (Vac) 380/400/415±1%Frequency (Hz) 50Hz/60Hz
Waveform Sine wave, THD<2% (linear load)Overload capacity Inverter state: 125% full load for 10 minutes; 150% full load for 1 minute.
Efficiency of system Up to 94%
OthersCommunication
function Supporting RS232, RS485 (ModBus protocol), dry contact communication
Alarm function Abnormal municipal power supply, battery undervoltage, output overload, etc.Protection function Battery undervoltage protection, overload protection, short circuit protection, overtemperature protection, input overvoltage protection, etc.
Ambient temperature -5° C~40° C
Relative humidity 0%~95%(no condensation)Noise <60dB <65dB <70dB
Dimensions (W × D× H) 500×600×1180mm 500×800×1600mm 700×800 ×1800mm 1400×1000×1850mm 1600×1000×1850mm 3000×1000×1800mm
Weight (kg) 230 260 300 400 430 450 520 600 650 825 1280 1568 1830 2050 4500 4600
* 200-400 kVA chassis height 1800mm, 50mm for the height of the fan protruding on the top; detachable fan. * Specification indexes may be subject to changes without further notice.
产品Products
45
PV MPPT ControllerSPC048100~SPC048200-M
Product Features• Hot plug, convenient for expansion and maintenance • Ultra low power design, night loss is zero• Intelligent battery charging management system to prevent
overcharge or over discharging and prolong the battery service life• Improve the functions of detection, alarm and protection • Common positive control mode and rack type installation • Batterytemperature sensor can be mounted outside for battery
temperature compensation control • Users can set working parameters. Each item displays parameter
setting with power failure saving function• Supporting remote monitoring
Technical SpecificationItem
Index SPC048100-M SPC048150-M SPC048200-M
Capacity of solar MPPT charging module 50A MPPT moduleX2 50A MPPT moduleX3 50A MPPT moduleX4
Solar input (air switch) 2 circuits (63A×2) 3 circuits (63A×3) 4 circuits (63A×4)
Maximum input current of solar energy 2×40A 3×40A 4×40A
Input voltage of solar energy 50Vdc~150Vdc
Battery shunt (air switch) 1 circuit*200A (detection of the total current of the battery only)
Output shunt (air switch) Main load: 4 way (63A+50+32+20) secondary load: 4 circuits (63A+50+32+20)
Output voltage Typical value of 44.0 Vdc ~ 58.0 Vdc is 54.0 Vdc
Output current of solar MPPT controller <100A <150A <200A
Work efficiency ≥ 95% ≥ 95% ≥ 95%
Level of protection IP20
Working temperature -20° C~+55° C
Ambient temperature -40° C ~70° C
Relative humidity 0~95% (no condensation)
Altitude >5500m (derating )
Dimensions (W × D× H) 487×426.3×352.5mm
Level of protection IP20* MPPTpower modules and monitoring modules cannot be sold separately. * Specification indexes may be subject to changes without further notice.
产品Products
48
2-2
PV MPPT ControllerSPC220300~ SPC384300-M
Product Features
Application
MPPT Module
• The maximum power point tracking technology can significantly improve the utilization ratio of solar power generation
• High reliable and intelligent DSP full digital control technology• High efficiency, small size and modular design, meeting the
needs of high customization• Use of high frequency three-phase interleaving technology
and ultra-low output ripple current improves the battery service life
• Serial 485 communication mode to facilitate system expansion and monitoring management
• Using ultra low power design, intelligent sleep and zero loss at night
It can be widely used in the solar DC power supply system, solar direct current street lamp system, small and medium solar power off-grid station system in plateau, island, remote mountainous areas, countryside and field with extreme climate conditions, or used in the off-grid power supply system of communication base station in remote areas such as villages, villages, border defense and pastoral areas.
49
产品Products
System Parameter
MPPT module parameters
ItemIndex SPC220300-M SPC348300-M SPC384300-M
Input side parametersPV input working voltage 250~550Vdc 420~850Vdc 480~850Vdc
PVfull load working voltage 270~430Vdc 440 〜 700Vdc 500 〜 700VdcMaximum PV input current 60×4A 60×4A 60×4A
PV input power rating 16.5×4kW 26.5×4kW 29.3×kW
Output side parametersBattery operating voltage range 189~260Vdc 304~420Vdc 336~464Vdc
Rated voltage of battery 220Vdc 348Vdc 384VdcRated output current 300A 300A 300A
OthersAmbient temperature -20° C~+55° C
Altitude 3000m (>1000m derating)Level of protection IP20
Dimensions (W × D× H) 600×600×l800mm
ItemIndex SPC220300-M SPC348300-M SPC384300-M
Input side parametersPV input working voltage 25Vdc0~550Vdc 420Vdc~850Vdc 480Vdc~850Vdc
PVfull load working voltage 270Vdc~430Vdc 440Vdc~700Vdc 500Vdc~700VdcMaximum PV input current 60A 60A 60A
PV input power rating 16.5kW 26.5kW 29.3kWMPPT tracking precision (MAX) ≥ 99.6% ≥ 99.5% ≥ 99.6%
PV startup voltage 210Vdc 350Vdc 390Vdc
Output side parametersBattery operating voltage range 189~260Vdc 304~420Vdc 336~464Vdc
Rated voltage of battery 220Vdc 348Vdc 384VdcRated output current 75A 75A 75A
Maximum conversion efficiency of module ≥ 96.6% ≥ 98.4% ≥ 98.4%
Pre-charging current 6AOutput ripple voltage coefficient ≤ ±1.5%
Other ParametersStand-by power consumption < 16W
Power loss at night 0WNight reverse discharging current 0A
Cooling mode Air coolingNoise ≤ 60dB
Dimensions (W × D× H) 440×465×88mm (without ears of panels) 479×465×88mm (with ears of panels)
* Specification indexes may be subject to changes without further notice.
52
2-3
Lithium-ion Battery
BMS management system
Temperature
Voltage
Insulation
Warning
Single core
Core assembly module
Basic module
PACK assembly standard module
Basic module
BMS
Basic module
Series connection in cabinet
Single battery cabinet
Multi-cabinet parallel
connection
Extended capacity
Multi battery cabinet parallel connectionContainer application
SOCSOH
Communication Balanced
Current
Batterysystem
BMU BMS MBMS
• Three-tier architecture for battery system: (BMU/BMS/MBMS)
• MBMS: will collect all status and parameters of the battery system, and communicate and regulation with PCS and EMS• High multiplier application: the common system can achieve 1C multiplier charge and discharge, and the high multiplier system can
achieve 5C multiplier charge and discharge• BMS system will implement the following parameter control
53
产品Products
Lead carbon battery
Charging is 8 times faster
Discharging power is
increased by 3 times
The cycle life increased to
6 timesTraditional lead-acid battery
VS
Safe and stable use
High Cost Performance
Cycle charging number up to 3000 times at
60%DOD
Description Unit ValueRated voltage V 672
Battery capacity MWh 1.344Dimensions 尺 40
Weight T 56Operating voltage range V 604~790
Recommended discharge current A 414
Level of protection IP IP54Discharge depth DOD 70%
Ambient Temperature ° C 10~30
55
EMS(Energy Management System)
Product Features
Product Features
Applicable System
Technical SpecificationItem
Index EMS energy management cabinet
AC input supply AC220/50HzCommunication interface RS485, RJ45, CAN
Dispatching Communication Ethernet, optical fiberDisplay Standard: 7 inch (touch screen), optional 10 inch (touch screen) or LCD.
Level of protection IP20Relative humidity 0~95% (no condesation)
Altitude 6000m (>4000m derating)Dimensions (W × D× H) 800×800×2000mm
* Specification indexes may be subject to changes without further notice.
• Micro-grid system energy control • Integrated optical storage and charging system control • Multi-energy complementation system control
• Standard power dispatching interface, supporting various communication protocols
• Able to achieve integrated energy management and control for power systems and load systems.
• User friendly human-machine interface, easy to manage and operate
• Energy management and control of small micro-grid system• Flexible energy control, ensuring users can adjust their
working mode on the basis of system changes provided that the system runs reliably
• Control of system active, reactive and anti-counter current• The system is fully automatic without the human attendance
EMS Energy Management Cabinet
产品Products
57
Off-grid Switchgear CabinetBTS100~1000K-K/S
Product Features
Applicable System• Small microgrid system• User side commercial energy storage system• Dual demand system of peak load shifting and emergency
power supply
• Quickly separate the system from the power grid (switching time < 10ms)
• No need for additional configuration of microgrid system controls, reducing additional investment
• With manual control mode, operation control necessary for various experiments and switching control failures
• There are two switching speed options (< 10ms and < 200ms)• With cooling system with Kehua's proprietary technology
ensures the reliability of the system in various applications
Technical SpecificationItem
Index BTS-100K-K/S BTS-200K-K/S BTS-500K-K/S BTS-1000K-K/S
Maximum AC power 100kVA 200 kVA 500 kVA 1000 kVA
Maximum AC current 144A 289 A 722 A 1444 A
Rated grid voltage 400 Vac
Grid voltage range 300~500Vac
Level of protection Fast type IP20/ordinary type IP21
Switch Selection BTS-K is contactor version/BTS-S is SCR version
Operating temperature range -25° C ~+55° C
Relative humidity 0~95% (no condensation)
Protection Overtemperature, overcurrent, short circuit, lightning protection, etc.
Altitude 5000mm (>3000m derating)
Dimensions (W × D× H) 800×800×1800mm 800×800×2000mm 1000×1000×2000mm
* Specification indexes may be subject to changes without further notice.
产品Products
59
Anti-counter Current ControllerSPA1000
Technical Specification
Product Features
Applicable System• Small microgrid system• User side commercial energy storage system• No EMS system for the microgrid, with anti-counter current
controlling scheme
• quick anti-current control response, ms-level response• Reducing system investment, without EMS energ y
management system, realizing small energy storage grid connection and anti-counter current controlling
• According to different power supply demands, the corresponding control strategy can be made
• Ensure maximizing revenue provided that the grid interconnection of the energy storage system is safe
ItemIndex SPA1000
Input data (inverter side)Monitor the maximum number of
inverters 32 channels
Dry contact (reserved) 4 channels
Output data (grid side)
Rated voltage 400Vac
Allowable grid frequency 47-51.5HZ
Rated frequency 50Hz
Reverse current protection Yes
Communication interface RS485
Human-machine interface OCMJ8x15D liquid crystal
Level of protection IP20
Dimensions (W × D× H) 440×360×130mm
* Specification indexes may be subject to changes without further notice.
产品Products
61
Applications
Power generation projects of off-grid system• 1.2MW PV energy storage off-grid power supply system• supporting off-grid project• ZONERGY off-grid energy storage supporting project• Indonesian off-grid energy storage project• Dalong Temple off-grid system in Yushu. • Complementary off-grid system of frontier wind power
generation project of Tibet Military Area• Off-grid system of a military sub-area in • Off-grid system of a military troop in Kangding, Sichuan• Power construction project in the western power not
covered by power supply• Lighting off-grid system of Lishui Tunnel in • Off-grid system station of Xiamen Tong’an Plaza • Indoor lighting off-grid system of a patent office in • Lighting off-grid system of Lishui Tunnel in• Off-grid system station of Xiamen Tong’an Plaza• ......
Energy storage / microgrid system projects• Grid support energy storage project, the wind power
plant of Mingyang, Heilongjiang, China• PV+Energy storage+Charger application, Potevio New
Energy Co., Ltd, Shenzhen, China• Commerical Peak cut application, Guoxuan High-tech
power energy Co., Ltd, Hefei, China• Wind power + PV application of military, weak power grid
or without grid in western China• Commerical Peak cut application, Do-Fluoride Chemicals
Co., Ltd, Jiaozuo, China• Energy storage project, Pylon Technologies, Co. Ltd,
China• Commerical Peak cut application, Beijing, China• Wind power + PV application of street lamp for power
supply, Gulei, Zhangzhou, China• MW micro-grid station for scenic, Inner Mongolia, China• ......
案例Applications
63
案例Applications
02
03
04
普天新能源(深圳)秀峰公交站光储充项目Potevio New Energy’s (Shenzhen) XiufengPVstorage and charging project for bus stations
03
广州白兔变电站退役电池梯级利用储能示范工程Cascade Utilization Energy Storage Demonstration Project of Battery Decommissioned from Guangzhou Baitu Substation
02
合 肥 国 轩 高 科 新 能 源 有限 公 司削峰 填 谷1MW/4MWh 项目Peak shifting 1MW/4MWh Project of Hefei Guoxuan Hi-tech New Energy Co., Ltd.
04
Energy storage / microgrid system projects
65
案例Applications
02
03
04 04
印尼海岛电厂离网系统Indonesian off-grid energy storage project
03
澳大利亚海岛离网项目 Australian Island Off-grid Project
02
墨西哥离网项目 Mexican off-grid project
04
Power generation projects of off-grid system