Zert Report: C4B Xphone OS4k V7 - Unifypartnerdialog.unify.com/portal/.../1955_Zert_Report... · Certification Test Report Page 4 (of 29) XPhone Connect - OpenScape 4000 V7 1 History

Copyright © Unify GmbH & Co. KG, 2013

Hofmannstr. 63, D-81379 Munich, Germany

All rights reserved.

Unify, OpenScape, OpenStage and HiPath are registered

trademarks of Unify GmbH & Co. KG. All other company, brand,

product and service names are trademarks or registered

trademarks of their respective holders.

Unify Ready Technology connectivity certification

The connectivity of

XPhone Connect V5

developed by C4B Com For Business AG has been certified at the CSTA and SIP Interface of OpenScape 4000 V7 in accordance with the test report dated September 30, 2015.

C4B Com For Business AG is now entitled to label the above mentioned

product with the Unify Ready emblem.

The test was conducted conforming to DIN EN ISO 9001. This certificate is only valid in conjunction with the full test report and the notes contained

therein. Please consider that the test report only covers the functionality of the interface. The certificate and test report are not good for a

statement of end-to-end functionality.

Munich, October 8th 2015

Luzia Stephan

Director Technology Partner Program

Test Report of Certification

XPhone Connect

with

OpenScape 4000 V7

Test Status: released

Release Date: September 30, 2015

Copyright © Unify GmbH & Co. KG, 2015

Reproduction and distribution of this document as well and the use and communication of the information contained without explicit permission is prohibited. Violation of this copyright will result in claim for compensation.

All rights, including rights created by patent grant or registration of model or design, are reserved.

Certification Test Report Page 2 (of 29) XPhone Connect - OpenScape 4000 V7

1 HISTORY OF CHANGE ......................................................................................... 1-4

2 OVERVIEW ............................................................................................................ 2-5

2.1 Test Object ....................................... ............................................................................ 2-5

2.1.1 Basic Equipment ................................................................................................................ 2-5

2.1.2 XPhone Server .................................................................................................................. 2-5

2.1.3 XPhone Connect client ....................................................................................................... 2-6

2.2 Test Strategy ..................................... ........................................................................... 2-6

2.2.1 Test Intensity ..................................................................................................................... 2-6

2.2.2 Measuring / Test Instruments ............................................................................................. 2-6

2.3 Realization Data .................................. ......................................................................... 2-7

2.4 Test Result Summary ............................... ................................................................... 2-8

2.4.1 Problems ........................................................................................................................... 2-8

2.4.2 Restrictions ........................................................................................................................ 2-8

2.4.3 Remarks ............................................................................................................................ 2-8

3 CONFIGURATION ................................................................................................. 3-9

3.1 XPhone Applications ............................... .................................................................... 3-9

3.1.1 Configuration Guidelines .................................................................................................... 3-9

3.2 OpenScape 4000 .................................... ...................................................................... 3-9

3.2.1 Configuration Guidelines .................................................................................................. 3-10

3.3 Configuration Block Diagram ....................... ............................................................. 3-10

4 TEST RESULTS IN DETAIL ............................ .................................................... 4-11

4.1 Test with Call Processing ......................... ................................................................. 4-11

4.1.1 Startup, Configuration and Administration XPhone Server ................................................ 4-11

4.2 Restart Behavior / Recovery ....................... .............................................................. 4-11

4.2.1 Recovery from XPhone Client Restart .............................................................................. 4-11

4.2.2 OpenScape 4000 restart .................................................................................................. 4-11

4.2.3 Device Restart ................................................................................................................. 4-11

4.2.4 Loss of Input Data for XPhone Server / Client .................................................................. 4-12

4.3 Functionality ..................................... ......................................................................... 4-12

4.3.1 CTI XPhone Connect Client Telephony Functions ............................................................ 4-12

4.3.2 CTI XPhone Connect Client Team Functions ................................................................... 4-13

4.3.3 CTI Hotkey Functions ....................................................................................................... 4-14

4.3.4 CTI Journal Functions ...................................................................................................... 4-14

4.3.5 XPhone AnyDevice .......................................................................................................... 4-14

4.3.6 UM Functions................................................................................................................... 4-16

4.3.7 Conferencing ................................................................................................................... 4-17


4.4 Remarks ........................................... .......................................................................... 4-18

5 CONFIGURATION DATA ................................ .................................................... 5-19

5.1 OpenScape 4000 .................................... .................................................................... 5-19

5.1.1 AMO & WBM Configuration for Native SIP Trunk (CTI & UM) ........................................... 5-19

5.1.2 CSTA Configuration ......................................................................................................... 5-25

5.1.3 XPhone UM ..................................................................................................................... 5-27

5.2 Devices ........................................... ............................................................................ 5-28

5.3 XPhone Connect .................................... .................................................................... 5-28

6 CONFIRMATION ................................................................................................. 6-29


1 History of Change

Date Description Name

September, 2015 Initial Creation Eddy Sterckx

Email: [email protected]

Phone: +32 2 406 7179

C4B Com For Business AG Alexander Haugg E-Mail: [email protected] Phone: +49 89 84 07 98 170

September 14 - 15,

2015

Certification test Eddy Sterckx


Phone: +32 2 406 7179


September 21, 2015

September 23, 2015

September 22, 2015

Review test document & update

results.

Eddy Sterckx


Phone: +32 2 406 7179


September 29, 2015 Final review Eddy De Braekeleer

E-Mail: [email protected]

Phone: +32.2.406 7316

September 30, 2015 Release Eddy De Braekeleer

E-Mail: [email protected]

Phone: +32.2.406 7316


2 Overview

This document includes details of required certification environment, XPhone versions to be tested and contact details.

Proposed test dates C4B proposed the following dates for the interface functionality test between OpenScape 4000 v7 and the XPhone Connect client/server solution.

14.09 – 15.09

2.1 Test Object

2.1.1 Basic Equipment

Test system: OpenScape 4000 V7 Software Version: Platform V7 R1.39.0

Assistant V7 R1.7.4

RMX V7 R1.39.6

CSTA V7 R1.206.7

2.1.2 XPhone Server

Certification: Test of interface functionality between the OpenScape 4000 and the Com For Business XPhone Connect Server. Also failure cases and features are considered.

Test Equipment: Win 2012 R2 Server (XPhone Connect Server) Software Release: Version XPhone Connect 5.0.5.3

HW / FW Release: NA Manufacturer: C4B AG Gabriele-Münter-Straße 3-5 D - 82110 Germering

Description: Documentation: See user manual (shipped with systems). For additional info concerning C4B

products is please refer to http://www.c4b.de/en Test Network: Test Configuration: See figure in section 3.3. Licenses Test licenses offering full functionality for the duration of the tests.


2.1.3 XPhone Connect client

Certification: Test of the CTI/UM/AnyDevice/Conference functionality and the features of XPhone Connect client.

Test Equipment: Desktop PCs with Windows 7 64Bit Software Releases: XPhone Client 5.0.5.3

HW / FW Release: NA Manufacturer: C4B AG Gabriele-Münter-Straße 3-5 D - 82110 Germering

Description: XPhone Connect Client applications to monitor and handle the phone lines of one or more users. It uses the XPhone Server application to connect to the OpenScape 4000. These client applications are installed on a desktop PC.

Test Network: Test Configuration: See figure in section 3.3.

2.2 Test Strategy

The main goal is to test:

• the interfaces between the OpenScape 4000 and the C4B products • the system failure/recovery behaviour • the main functionality

The interface between the XPhone server and the OpenScape 4000 is CSTA and SIP based.

2.2.1 Test Intensity

Scopes of the tests are to execute / to verify the solution performs within the limits of the system requirements, targeting the end product. To accomplish this, feature and solution based test cases are created, inspected, and executed under a real system environment (mirroring as close as possible real customer's environment).

Note: The testing of the product with regard to compliance to requirements for Product Safety, EMV, Network Access Interfaces and Radiation Protection were not performed.

2.2.2 Measuring / Test Instruments

Tracing and monitoring available on all IP phones, servers, gateways and laptops. No special hardware required.


2.3 Realization Data

Test p reparation: September 11, 2015

Test Duration: September 14 – 15, 2015

Test Location: Unify Communications NV

Demeurslaan 134

1654 Huizingen

International Solution Lab

Test Personnel: UNIFY: Test execution: Eddy Sterckx


Phone: +32 2 406 7179

C4B Com For Business AG: Test execution Alexander Haugg E-Mail: [email protected] Tel: +49 89 84 07 98 170 UNIFY: Coordination: Eddy De Braekeleer Service PSS E-Mail: [email protected] Phone: +32.2.406 7316


2.4 Test Result Summary

C4B XPhone Connect has been successfully tested with OpenScape 4000 V7

2.4.1 Problems

1. Test 60: AnyDevice Consultation -> Conference is not possible.

- The option is available - The Conference Room will created - But the calls will not transferred into the Conference

Needs further investigation from XPhone Connect side.

2.4.2 Restrictions

1. Test 52: Not supported in actual client version. Will be implemented in future “XPhone Connect Client” release. Needs further investigation from XPhone Connect side.

2. Test 56: Not supported on OS4K HFA IP phones.

3. Test 57&58&59: The display info is not updated after the call is transferred or redirected/deflected. The initial called party number (B-party) is shown on C-party. Will be implemented in future “XPhone Connect Client” release. Needs further investigation from XPhone Connect side.

2.4.3 Remarks

1. General “XPhone AnyDevice” Number display format on the Openstage phones is shown in national format with leading zeros.


3 Configuration

3.1 XPhone Applications

3.1.1 Configuration Guidelines

C4B XPhone was configured by C4B personnel for the certification test due to system settings of the switch in the certification lab.

The XPhone server application runs on the following operating systems

• Microsoft Windows Server 2012 R2 / 2012 / 2008 R2 (SP1) (64 Bit)

The XPhone client application runs on the following operating systems:

• Windows 8.1 Pro / Enterprise (32/64 bit) • Windows 8 Pro / Enterprise (32/64 bit) • Windows 7 Professional (32/64 bit)

Note: Recent Windows service packs are mandatory for XPhone Server and client operation.

3.2 OpenScape 4000

- Fax

2020 anate fax on OpenScape 4000 612010 fax extension on XPhone Connect Server 3224060197 external fax

- TDM phones

2016 OpenStage 15T 2017 OpenStage 20T

- IP phones

2010 OpenStage 60 V3 R0.23.3

2011 OpenStage 20 V3 R0.23.3

- Voice mail

602010 access code voice mail

- IP addresses

10.10.40.45 TCP/UDP port 5060 STMI HG board (UM) pzksti40.A2.004-002 10.10.40.145 TCP/UDP port 5062 STMI HG board (CTI) pzksti40.A2.004-002 10.10.40.53 CSTA 10.10.40.100 XPhone Connect Server


3.2.1 Configuration Guidelines

3.2.1.1 CSTA Link

No special configuration necessary, for more info see chapter 5.

3.2.1.2 XCAPI Link

Fax/Voice Mail connectivity is also supported by XCAPI (IP channels). XCAPI test licenses are automatically included and are sufficient for certification purposes. These are fully functional but insert a black stripe on tests faxes or a sound bite in the voice mails. No special configuration necessary, for more info see chapter 4.

3.3 Configuration Block Diagram

Openscape 4000

Client 2

S2 ETSI PTT 32 2 33420XX

Opti 2016 & 2017

OptiIP 2010 & 2011

Up0

LAN

Xphone Server

LAN

LAN

LANA/B Fax 2020

LAN

Client 1


4 Test Results in detail

4.1 Test with Call Processing

This test part checks the correct connection of the OpenScape 4000 system to the C4B XPhone Connect computing system. For that different call scenarios are executed.

4.1.1 Startup, Configuration and Administration XPh one Server

No Test Procedure Expected Result Result 1. Power-on and Start-up Startup is successful.

Configuration is successful and in case there already was a stored configuration it still exists

OK

2. Specify client capabilities System capabilities and settings are done for the specific test environment

OK

3. Team Configuration OpenScape 4000 parties can be configured into XPhone Connect Client/ XPhone Connect Team Panel

OK

4.2 Restart Behavior / Recovery

4.2.1 Recovery from XPhone Client Restart

No Test Procedure Expected Result Result 4. Restart on C4B XPhone Connect

Client. C4B XPhone Client comes back to work in case it is included in auto start procedures. The actual configuration still exists.

OK

4.2.2 OpenScape 4000 restart

No Test Procedure Expected Result Result 5. Soft Restart of OpenScape 4000 Client shows inoperability. After restart the

client comes back to work without manual interferences.

OK

6. Power off of OpenScape 4000 Client shows inoperability. After restart the client comes back to work without manual interferences.

OK

4.2.3 Device Restart

No Test Procedure Expected Result Result 7. Pull and push SLMO card with

the configured digital subscriber Subscriber shows inoperability. After reload of the card, the subscriber comes back into service without manual interferences.

OK

8. Pull and push line of digital subscriber

Subscriber shows inoperability. After reconnection, the subscriber comes back to work without manual interferences.

OK

9. Pull LAN Cable from IP Phone No unregister message is sent for half an hour, the XPhone client application will not respond

OK


4.2.4 Loss of Input Data for XPhone Server / Client

No Test Procedure Expected Result Result 10. Disconnect LAN cable of XPhone

Client and put it back again The client displays the broken connection. After re-establishing the link the client comes up again.

OK

11. Disconnect LAN cable of XPhone Server and put it back again

The client continues to work but shows inoperability. After re-establishing the link the client continues work.

OK

12. Disconnect LAN signalling cable between LAN switches and OpenScape 4000 and put it back again

The client continues to work but shows inoperability. After re-establishing the link the client continues work.

NP

4.3 Functionality

4.3.1 CTI XPhone Connect Client Telephony Functions

No Test Procedure Expected Result Result 13. XPhone Connect Client initiates an

internal call. Call is set up OK

14. XPhone Connect Client initiates an external call.

Call is set up OK

15. XPhone Connect Client initiates a consultation internal/external

Consultation status is reached OK

16. XPhone Connect Client transfers the call

Call is transferred OK

17. XPhone Connect Client chooses to toggle

Toggling between the two calls OK

18. XPhone Connect Client chooses to initiate a conference (internal and external)

Conference is established OK

19. XPhone Connect Client chooses to initiate a conference (internal)


20. XPhone Connect Client creates a conference with external parties (using PSTN trunk)


21. XPhone Connect Client chooses to release the call

Call is released OK

22. XPhone Connect Client accepts an incoming call.

Call is accepted, XPhone Connect Client is in conversation status

OK

23. XPhone Connect Client is busy, another call camps on. The user chooses to accept this call

Call is accepted, original party is put on hold. XPhone Connect Client is in conversation status

OK

24. XPhone Connect Client redirects an incoming internal call to any valid number (team member or not team member)

Call is redirected, there it starts ringing OK

25. XPhone Connect Client redirects an incoming external call to any valid number (team member or not team member)

Call is redirected, there it starts ringing OK

26. XPhone Connect Client calls a hunting group. A member of the

User is connected to client. OK


hunting group takes the call.

27. XPhone Connect Client is member of a hunting group. It gets a call over the hunting group and takes the call.

Client is connected to the caller of the hunting group.

OK

28. XPhone Connect Client gets an incoming call. User decides to reject.

Call is cleared OK

29. A User has call forwarding enabled to XPhone

XPhone Connect Client, detects the forwaded call

OK

30. XPhone Connect Client with server based features enabled) sets call forwarding options for the device.

Call forwarding notification is visible on the phone.

OK

31. XPhone Connect Client with server based features enabled) sets do not disturb option for the device.

Do not disturb notification is visible on the phone

OK

4.3.2 CTI XPhone Connect Client Team Functions

The Connect Team toolbar provides additional functionality. These tests are performed with external lines.

No Test Procedure Expected Result Result 32. Adding a contact to the personal

contact list Contact appears as team member in the contact list

OK

33. See call signalling at team member in the personal contact list (assistant relationship must be configured to this member)

Presence state must show "red flashing". Number of name or caller must be shown. Pickup command must be shown.

OK

34. See phone busy state of team member in the personal contact list (assistant relationship must be configured to this member)

Presence state must show "red hashed" pattern. Status text shows "on the phone".

OK

35. Pickup call from a team member in the personal contact list (assistant relationship must be configured to this member)

Call is diverted to the own device. Call is ringing and must be accepted manually (on the device or with the client).

OK

36. Diverting my calls to another party internal (destination not limited to team members). Diversion is iniated from the "more" button in the toast window of an incoming call.

Call rings at new destination. OK

37. Diverting my calls to another party internal to another PBX node (destination not limited to team members)


38. Diverting my calls to another party external (destination not limited to team members)


39. Setting up a consultation. Call is already being established. Pressing the "dial" command in the personal contact list starts a consultation.

Consultation call is set up. OK


4.3.3 CTI Hotkey Functions

For hot key functionality the key combination ‘ALT’ – F12 is used. No Test Procedure Expected Result Result

40. XPhone Connect Client dials external number out of a Word document

The call is set up. OK

41. XPhone Connect Client accepts incoming internal call with ALT+F12

The call is accepted OK

42. XPhone Connect Client chooses a text string out of a Word document that matches to one or more ("Last-") Names of the phone book.

All matches of the phone book are presented.

NP

4.3.4 CTI Journal Functions

For journal functions the test cases should show that the basic activities are recognized and are shown and can be used for further activities.

No Test Procedure Expected Result Result 43. XPhone Connect Commander logs

incoming and outgoing calls, external as well as internal. The call log is divided in Pending, Completed and Missed Calls. The log entry appears a couple of seconds after termination of a call

The log shows the call data correctly OK

4.3.5 XPhone AnyDevice

Basic Phone

No Test Procedure Int - int Int - ext ext - int ext - ext Display 44. Outbound Call OK OK OK OK OK

45. Outbound Call "AssistedDial" NP NP NP NP NP

46. Inbound Call OK OK OK OK OK

47. Answer Call (possible via "AnyDevice" only!)

OK OK OK OK OK

48. Hold Call OK OK OK OK OK

49. Drop Call OK OK OK OK OK

50. Reject Call OK OK OK OK OK


Consultation

No Test Procedure Int - int ext - ext internal external Display 51. Consultation initiatet by connected call OK OK OK OK OK

52. Consultation initiated by hold call NS RES 1

NS RES 1

NS RES 1

NS RES 1

NS RES 1

53. Swap hold OK OK OK OK OK

54. Disconnect connected call OK OK OK OK OK

55. Hold partner hang up OK OK OK OK OK

56. Consulted partner reject the call NS RES 2

NS RES 2

NS RES 2

NS RES 2

NS RES 2

Transfer Phone

No Test Procedure Int - int ext - ext internal external Display 57. Transfer Consultation OK OK OK OK NOK

RES 3 58. Blind Transfer OK OK OK OK NOK

RES 3 59. Redirect / Deflect OK OK OK OK NOK

RES 3

Specials

No Test Procedure Int - int ext - ext internal external Display 60. Consultation -> Conference NOK

PROB 1 NOK

PROB 1 NOK

PROB 1 NOK

PROB 1 NOK

PROB 1


4.3.6 UM Functions

No Test Procedure Expected Result Result 61. User calls voice portal of XPhone UM Server and wants

to get access to his voice mailbox. The user gets access to his voice mailbox.

OK

62. User activates Call Forwarding to the voice portal and gets an incoming call (internal and external).

The caller will be transferred to the voice mailbox and can leave a message.

OK

63. Info: The feature “secret number” can be activated. The caller will be transferred to the voice mailbox and can leave a message.

OK

64. A new voicemail message was left. XPhone Client signals a new voicemail message.

OK

65. A new voicemail message was left. Will be signalled at the phone by (MWI).

OK

66. Playback of a voice message. The voice message can be played back on XPhone Client and phone..

OK

67. Playback of a new voice message at the phone and initiating a call to the caller.

The user will be connected to the caller.

OK

68. User has activated the feature Representative in his voice mailbox. (internal and external)

Caller will be transferred to the representative.

OK

69. During the announcement, the caller can be transferred to the representative by dialling the digit 1.)

Caller will be transferred to the representative.

OK

70. Sending a Fax by XPhone Client (to internal and external)

OK

71 Receiving a Fax by XPhone Client (from internal and external)

OK

Important : If the voice mail feature “Representative” will be used, then following XCAPI configuration must be set:

ETC simulation, all parameter must be deactivated. (see screenshot below)


4.3.7 Conferencing

Number signalling (traced with Wireshark)

From header

No Test Procedure Expected Result Result 72. From external E164 International OK

73. From internal E164 International OK

74. Via AnyDevice E164 International OK

To header

No Test Procedure Expected Result Result 75. From external Extension OK

76. From internal Extension OK

77. Via AnyDevice Extension OK

Call into the conference

Automatic authentication

No Test Procedure Expected Result Result 78. From external OK

79. From internal OK

80. Via AnyDevice OK

Authentication by PIN

No Test Procedure Expected Result Result 81. From external OK

82. From internal OK

83. Via AnyDevice OK

Voice quality (it is a subjective test, report artefact only!)

Voice direction inbound (OS4K -> XCC)

No Test Procedure Expected Result Result 85. Member external OK

86. Member internal OK

87. Member Via AnyDevice OK

Voice direction outbound (XCC -> OS4K)

No Test Procedure Expected Result Result 88. Member external OK

89. Member internal OK

90. Member Via AnyDevice OK


4.4 Remarks

Meanings of Abbreviations:

OK Test case successful

NOK Test case NOT successful

NA Test case not applicable

NP Test case not processed

NS Situation not supplied

N *X Error / restriction with description

* X Remark to Functionality


5 Configuration Data

5.1 OpenScape 4000

5.1.1 AMO & WBM Configuration for Native SIP Trunk (CTI & UM)

Both SIP trunks where configured in the same way with the only exception for the “TCP/UDP” ports in the STMI WBM profile proxy configuration ( See screenshot below). There for the configuration of only one NSIP trunk is reported. English Amo’s ADD-BCSU:IPGW,1,1,3,"Q2324-X510",1,"0",3,,,,30,,,0,IPV4,NO,NO; ADD-BFDAT:3,HG3550,BCHL60&BCHL120,; CHANGE-BFDAT:CONT,3,HG3550,2,3,; CHANGE-BFDAT:OK,3,YES; ADD-CGWB:1,3,NORMAL,10.10.40.145,255.255.255.0,,,,,,,,,,,,,,,,; CHANGE-CGWB:CGW,1,3,GLOBIF,,,213,NO,0,10.10.40.1,,"100MBFD",30,0,0,0,4061,0.0.0.0,0.0.0.0,NO,5060,5061; CHANGE-CGWB:CGW,1,3,SERVIF,"TRM",; CHANGE-CGWB:CGW,1,3,ASC,29100,30099,"184","104",YES,YES,YES,NO,PRIO1,G711A,NO,"30"; CHANGE-CGWB:CGW,1,3,ASC,,,,,,,,,PRIO2,G729A,NO,"20"; CHANGE-CGWB:CGW,1,3,ASC,,,,,,,,,PRIO3,NONE,NO,"30"; CHANGE-CGWB:CGW,1,3,ASC,,,,,,,,,PRIO4,NONE,NO,"20"; CHANGE-CGWB:CGW,1,3,ASC,,,,,,,,,PRIO5,NONE,NO,"20"; CHANGE-CGWB:CGW,1,3,ASC,,,,,,,,,PRIO6,NONE,NO,"20"; CHANGE-CGWB:CGW,1,3,ASC,,,,,,,,,PRIO7,G729AB,YES,"20"; CHANGE-CGWB:CGW,1,3,GKDATA,,1719,"PRIMARYRASMANAGERID",,,1719,"SECONDARYRASMANAGERID",,120; CHANGE-CGWB:CGW,1,3,MGNTDATA,,8000,,443,CLASSIC; CHANGE-CGWB:CGW,1,3,DMCDATA,0; CHANGE-CGWB:CGW,1,3,WBMDATA,"HP4K-DEVEL",,ENGR; CHANGE-CGWB:CGW,1,3,WBMDATA,"HP4K-SU",,SU; CHANGE-CGWB:CGW,1,3,WBMDATA,"HP4K-ADMIN",,ADMIN; CHANGE-CGWB:CGW,1,3,WBMDATA,"HP4K-READER",,READONLY; CHANGE-CGWB:CGW,1,3,GWDATA,"PRIMARYRASMANAGERID",; CHANGE-CGWB:CGW,1,3,H235DATA,NO,NO,"h235securedgateway",,100,242-191-30-119-188-83-173-161-43-0-70-36-218-74-169-221-78-102-174-170; CHANGE-CGWB:CGW,1,3,SIPTRERH,NO,,,; CHANGE-CGWB:CGW,1,3,SIPTRSSA,NO,0.0.0.0,5060,5061,300,0.0.0.0,5060,5061; CHANGE-CGWB:CGW,1,3,DLSDATA,,18443,NO; CHANGE-CGWB:CGW,1,3,JB,40,120,20,4,60,200,2; CHANGE-CGWB:CGW,1,3,MANLANIF,0.0.0.0,0.0.0.0,NO,0,0.0.0.0; ADD-BUEND:92 ,"NSIP XPHONE ",30 ,0 ,* ,2 ,ON ,0 ,0 ,NEUTRAL;

ADD-COT:92,RCL&XFER&ANS&CEBC&CBBN&BSHT&LWNC&NLCR&TSCS&DFNN&NLRD&NOFT&NTON,,; ADD-COP:92,,TA,TA,,; ADD-COSSU:,100,,,,,,,,"100 NSIP"; CHANGE-COSSU:COS,100,TA&TNOTCR&TTT,,,,,,,; CHANGE-COSSU:COS,100,,NOCO&NOTIE,,,,,,; CHANGE-COSSU:COS,100,,,TA&TNOTCR&BASIC&MULTRA,,,,,; ADD-TDCSU:NEW,1-01-003-0,92,92,0,0,100,7,7,"NSIP XPHONE ",0,"ECMAV2",8,,NONE,, ,,GDTR,N,TIE,NONE,N,0,,00,0,,,,31,MANY,1-1-92,0,1,1,EMPTY,92,5,N,,,,,,16,8,8,0, 1,EC&G711&G729A&G729AOPT,,92,DSC,Y,TRADITIO,0,60,60,HG3550IP,1&&30,N,1,,0,0,0,0, 0,Y,; ADD-RICHT:CD,92,92,,,0,ALL,"XPhone Connect",,,92,,,,92,,,,,,1-1-92,YES,,1-1-92,NEUTRAL,NO,NO,; ADD-LODR:92,,,,NPI,ISDN,UNKNOWN; ADD-LODR:92,,,,ECHO,1; ADD-LODR:92,,,,END; ADD-LDAT:92,ALL,1,,92,92,1,,1,EMPTY,NONE,,4,,,,,,,,,,,,; No KNFOR


German Amo’s EINRICHTEN-BCSU:IPGW,1,1,3,"Q2324-X510",1,"0",3,,,,30,,,0,IPV4,NEIN,NEIN; EINRICHTEN-BFDAT:3,HG3550,BKAN60&BKAN120,; AENDERN-BFDAT:WEITER,3,HG3550,2,3,; AENDERN-BFDAT:OK,3,JA; EINRICHTEN-CGWB:1,3,NORMAL,10.10.40.145,255.255.255.0,,,,,,,,,,,,,,,,; AENDERN-CGWB:CGW,1,3,GLOBIF,,,213,NEIN,0,10.10.40.1,,"100MBFD",30,0,0,0,4061,0.0.0.0,0.0.0.0,NEIN,5060,5061; AENDERN-CGWB:CGW,1,3,SERVIF,"TRM",; AENDERN-CGWB:CGW,1,3,ASC,29100,30099,"184","104",JA,JA,JA,NEIN,PRIO1,G711A,NEIN,"30"; AENDERN-CGWB:CGW,1,3,ASC,,,,,,,,,PRIO2,G729A,NEIN,"20"; AENDERN-CGWB:CGW,1,3,ASC,,,,,,,,,PRIO3,NONE,NEIN,"30"; AENDERN-CGWB:CGW,1,3,ASC,,,,,,,,,PRIO4,NONE,NEIN,"20"; AENDERN-CGWB:CGW,1,3,ASC,,,,,,,,,PRIO5,NONE,NEIN,"20"; AENDERN-CGWB:CGW,1,3,ASC,,,,,,,,,PRIO6,NONE,NEIN,"20"; AENDERN-CGWB:CGW,1,3,ASC,,,,,,,,,PRIO7,G729AB,JA,"20"; AENDERN-CGWB:CGW,1,3,GKDATA,,1719,"PRIMARYRASMANAGERID",,,1719,"SECONDARYRASMANAGERID",,120; AENDERN-CGWB:CGW,1,3,MGNTDATA,,8000,,443,CLASSIC; AENDERN-CGWB:CGW,1,3,DMCDATA,0; AENDERN-CGWB:CGW,1,3,WBMDATA,"HP4K-DEVEL",,ENGR; AENDERN-CGWB:CGW,1,3,WBMDATA,"HP4K-SU",,SU; AENDERN-CGWB:CGW,1,3,WBMDATA,"HP4K-ADMIN",,ADMIN; AENDERN-CGWB:CGW,1,3,WBMDATA,"HP4K-READER",,READONLY; AENDERN-CGWB:CGW,1,3,GWDATA,"PRIMARYRASMANAGERID",; AENDERN-CGWB:CGW,1,3,H235DATA,NEIN,NEIN,"h235securedgateway",,100,242-191-30-119-188-83-173-161-43-0-70-36-218-74-169-221-78-102-174-170; AENDERN-CGWB:CGW,1,3,SIPTRERH,NEIN,,,; AENDERN-CGWB:CGW,1,3,SIPTRSSA,NEIN,0.0.0.0,5060,5061,300,0.0.0.0,5060,5061; AENDERN-CGWB:CGW,1,3,DLSDATA,,18443,NEIN; AENDERN-CGWB:CGW,1,3,JB,40,120,20,4,60,200,2; AENDERN-CGWB:CGW,1,3,MANLANIF,0.0.0.0,0.0.0.0,NEIN,0,0.0.0.0; EINRICHTEN-BUEND:92, "NSIP XPHONE ",30,0,*,2,ON,0,0,NEUTRAL; EINRICHTEN-COT:92,AERF&UASE&MVLT&UELM&RRBN&SAAO&LOKN&OLCR&TSCS&VKNN&OLRD&NOFT&KTON,,; EINRICHTEN-COP:92,,FBKW,FBKW,,; EINRICHTEN-COSSU:,100,,,,,,,, "100 NSIP"; AENDERN-COSSU:COS,100,FBKW&QVKW&UENW,,,,,,,; AENDERN-COSSU:COS,100,,NIB&NQVB,,,,,,; AENDERN-COSSU:COS,100,,,FBKW&QVKW&GRUBE&MULTRA,,,,,; EINRICHTEN-TDCSU:NEU,1-01-003-0,92,92,0,0,100,7,7,"SIP-TRUNK ",0,"ECMAV2",8,,KEINE,,,,GDTR,N,QUER,KEINE,N,0,,00,0,,,,31,VIELE,1-1-92,0,1,1,LEER,92,5,N,,,,,,16,8,8,0,1,EC&G711&G729A&G729AOPT,,92,AB,J,TRADITIO,0,60,60,HG3550IP,1&&30,N,1,,0,0,0,0,0,J,; EINRICHTEN-RICHT:KZ,92,92,,,0,ALLE,"XPhone Connect ",,,92,,,,92,,,,,,1-1-92,JA,,1-1-92,NEUTRAL,NEIN,NEIN,; EINRICHTEN-LODR:92,,,,NPI,ISDN,UNKNOWN; EINRICHTEN-LODR:92,,,,ECHOFELD,1; EINRICHTEN-LODR:92,,,,ENDE; EINRICHTEN-LDAT:92,ALLE,1,,92,92,1,,1,LEER,KEINE,,4,,,,,,,,,,,,; NO KNFOR


HG3500 WBM



“CTI” TCP/UDP port 5062


“UM” TCP/UDP port 5060


5.1.2 CSTA Configuration

ADD-CPTP:DPCON,55,"PROCID5","192.0.2.25"; ADD-CPTP:APPL,55,"ACM55","PROCID5","APPL55",YES,102,102,"ACM55","APPL55";

ADD-XAPPL:55,"APPL55 ","CAP55 ",,Y; CHANGE-XAPPL:SUBAPPL,55,D25,ACCOUNT&AGASSIGN&AGENT&ABANDON&QUEUED,; CHANGE-XAPPL:SUBAPPL,55,D25,REDIRECT&GRPSEL&LOGON&REC&RCGDISC,; CHANGE-XAPPL:SUBAPPL,55,D25,RCGSEL&ATB&SELECT&QUEUTS&DELIV,; CHANGE-XAPPL:SUBAPPL,55,D25,RTD&ASSOC&DISCON&RET&REMOV,; CHANGE-XAPPL:SUBAPPL,55,D25,ROUTD&GRP&CONNECT&GENDGTS&PULLBACK,; CHANGE-XAPPL:SUBAPPL,55,D25,GRPABAND&GRPDELIV&GRPDIV&GRPFWD&GRPQUED,; CHANGE-XAPPL:SUBAPPL,55,D25,DIGDIALD&RCGMPC&TTONGEN&MWI&CALLBACK,; CHANGE-XAPPL:SUBAPPL,55,D25,DATARES&DATASUSP&FASTDATA&SENDDATA&STARTDAT,; CHANGE-XAPPL:SUBAPPL,55,D25,STOPDATA&CALLFAIL&MOBILUSR&CALLINFO&APPINFO,; CHANGE-XAPPL:SUBAPPL,55,D25,APPOOS&APPBIS&APPCLEAR&CFWDED,; CHANGE-XAPPL:MONCB,55,D25,RCG,;

ADD-ACMSM:,55,ACLAPPL,"APPL55","ACM55","PROCID5",CB,"CSTAGW",Y,1020,1020;


Verify that the connection between application and PBX is correct:


5.1.3 XPhone UM

Configuration below is how it was done for the certification; this configuration will be customer depending. A second Native SIP trunk was created using TCP/UDP port 5060 (example see 5.1.1) ADD-BUEND:91,"XPHONE UM ",30,0,*,2,ON,0,0,NEUTRAL; ADD-RICHT:LRTENEW,191,ALL,"XPHONE UM ",91,1-1-91,,,FIX,DIGITS,"DTMF ",PP300,,,,,NO,NO,,0,NEUTRAL,NO,NO,NO,NO,NO,NO,NO,NO; ADD-LODR:191,,,,NPI,ISDN,UNKNOWN; ADD-LODR:191,,,,ECHO,1; ADD-LODR:191,,,,ECHO,2; ADD-LODR:191,,,,END; ADD-LODR:191,,,"XPHONE UM",; ADD-LDAT:191,ALL,1,,91,191,1,,1,EMPTY,NONE,,4,,,,,,,,,,,,; VM ADD-LDPLN:LCRPATT,0,"60"-"XXXX",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,191,,,1,,,,N; FAX ADD-LDPLN:LCRPATT,0,"61"-"XXXX",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,191,,,1,,,,N;


5.2 Devices

Normal installation

5.3 XPhone Connect

Conduct a normal installation of the XPhone Server / XPhone Clients.


6 Confirmation

Testing personnel confirms that the all test cases were performed and that the results were as described in this document. The testing personnel confirm test duration from 14.-15.09.2015.

Alexander Haugg Eddy Sterckx

C4B Com For Business AG Unify Belguim

Documents

Zert Report: C4B Xphone OS4k V7 - Unifypartnerdialog.unify.com/portal/.../1955_Zert_Report... · Certification Test Report Page 4 (of 29) XPhone Connect - OpenScape 4000 V7 1 History