4
50.0 g Extracon powder 1. Open the lid of the Mycomaster reader and put in the Zearalenon test strip. Zearalenon Flow Chart (2:5 extraction) 1 Sample Preparation Test Procedure Weigh 50 g of ground sample Add 2 or 4 sachets of extrac- tion powder 2. Select and fill in the test data on the touch screen of Mycomaster. When finished peel the tape of the Zearalenon strip. 3. Pipet 300 μl diluted extract into sample compartment and reseal the tape. 4. IMPORTANT: Make sure to pipet slowly and upright! If not done properly an INVALID RESULT will appear. Result Range of Zearalenon with diluted extract between 25-1400 ppb. Add 250 ml still bottled water Extract Shake vigorously for at least 1.5 minutes; do not exceed 2.5 min Clarify Centrifuge for 20 seconds Filter Pass extract through 0.45 μm filter Shake 1 e dilution extract Prepare 1,200 μl diluted extract Shake for 5 seconds 200 μl Extract + 1,000 μl ZEARQ-WET Dilution Buffer Trouw Nutrition is not responsible for the outcome of the measured values of Mycomaster. 1: for the right dilution per commodity see Appendix 1. document ID: Flowchart-mycomaster-S5-2.5-2017v3-14130

Zearalenon Flow Chart 1 - Selko · 1,100 μl DONQ-WET Dilution Buffer. Trouw Nutrition is not responsible for the outcome of the measured values of Mycomaster. 1: for the right dilution

  • Upload
    others

  • View
    14

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Zearalenon Flow Chart 1 - Selko · 1,100 μl DONQ-WET Dilution Buffer. Trouw Nutrition is not responsible for the outcome of the measured values of Mycomaster. 1: for the right dilution

50.0 g

Extraction

powder

1. Open the lid of theMycomaster readerand put in the Zearalenon test strip.

Zearalenon Flow Chart (2:5 extraction)1

Sample Preparation

Test Procedure

Weigh50 g of ground sample

Add 2 or 4 sachets of extrac-tion powder

2. Select and fill in the test data on the touch screenof Mycomaster. When finished peel the tape of the Zearalenon strip.

3. Pipet 300 μl dilutedextract into samplecompartment and reseal the tape.

4. IMPORTANT:Make sure to pipet slowlyand upright! If not done properly an INVALID RESULT will appear.

ResultRange of Zearalenon with diluted extract between 25-1400 ppb.

Add250 ml still bottled water

ExtractShake vigorously for at least 1.5 minutes; do not exceed 2.5 min

ClarifyCentrifuge for 20 seconds

FilterPass extract through 0.45 μm filter

Shake

1e dilution extract

Prepare1,200 μl diluted extractShake for 5 seconds

200 μl Extract

+1,000 μl ZEARQ-WET

Dilution Buffer

Trouw Nutrition is not responsible for the outcome of the measured values of Mycomaster.

1: for the right dilution per commodity see Appendix 1.

do

cum

ent

ID: F

low

cha

rt-m

yco

ma

ste

r-S5

-2.5

-201

7v3-14

130

eveer
Highlight
delete
eveer
Highlight
Page 2: Zearalenon Flow Chart 1 - Selko · 1,100 μl DONQ-WET Dilution Buffer. Trouw Nutrition is not responsible for the outcome of the measured values of Mycomaster. 1: for the right dilution

50.0 g

Extraction

powder

1. Open the lid of theMycomaster readerand put in the Deoxynivalenol teststrip.

Deoxynivalenol Flow Chart (2:5 Extraction)1

Sample Preparation

Test Procedure

Weigh50 g of ground sample

Add 2 packets of extraction powder

2. Select and fill in the test data on the touch screenof Mycomaster. When finished peel the tape of the Deoxynivalenol strip.

3. Pipet 300 μl dilutedextract into samplecompartment and reseal the tape.

4. IMPORTANT:Make sure to pipet slowlyand upright! If not done properly an INVALID RESULT will appear.

ResultRange of Deoxynivalenol with diluted extract between 250-6,000 ppb. Check TOXO dosage advise.

Add250 ml still bottled water

ExtractShake vigorously for at least 1.5 minutes; do not exceed 2.5 min

ClarifyCentrifuge for 20 seconds

FilterPass extract through 0.45 μm filter

Shake

1e dilution extract

Prepare1,200 μl diluted extractShake for 5 seconds

100 μl Extract

+ 1,100 μl DONQ-WET Dilution Buffer

Trouw Nutrition is not responsible for the outcome of the measured values of Mycomaster.

1: for the right dilution per commodity see Appendix 1.

do

cum

ent

ID: F

low

cha

rt-m

yco

ma

ste

r-S5-

2.5-

2017

v2-14

130

Page 3: Zearalenon Flow Chart 1 - Selko · 1,100 μl DONQ-WET Dilution Buffer. Trouw Nutrition is not responsible for the outcome of the measured values of Mycomaster. 1: for the right dilution

50.0 g

Extraction

powder

Aflatoxin Flow Chart (2:5 Extraction)1

Sample Preparation

Test Procedure

Weigh50 g of ground sample

Add 2 packets of extraction powder

2. Select and fill in the test data on the touch screenof Mycomaster. When finished peel the tape of the Aflatoxin strip.

3. Pipet 300 μl dilutedextract into samplecompartment and reseal the tape.

1. Open the lid of theMycomaster readerand put in theAflatoxin test strip.

4. IMPORTANT:Make sure to pipet slowlyand upright! If not done properly an INVALID RESULT will appear.

ResultRange of Aflatoxin with diluted extract between 3-150 ppb. Check TOXO dosage advise.

Add250 ml still bottled water

ExtractShake vigorously for at least 1.5 minutes; do not exceed 2.5 min

ClarifyCentrifuge for 20 seconds

FilterPass extract through 0.45 μm filter

Shake

1e dilution extract

Prepare900 μl diluted extractShake for 5 seconds

500 μl Extract

+400 μl AFQ-WET Dilution Buffer

Trouw Nutrition is not responsible for the outcome of the measured values of Mycomaster.

1: for the right dilution per commodity see Appendix 1.

do

cum

ent

ID: F

low

cha

rt-m

yco

ma

ste

r-S5-

2.5-

2017

v2-14

130

Page 4: Zearalenon Flow Chart 1 - Selko · 1,100 μl DONQ-WET Dilution Buffer. Trouw Nutrition is not responsible for the outcome of the measured values of Mycomaster. 1: for the right dilution

Shake

2e dilution extract

100 μl Diluted Extract

+900 μl FUMQ-WET

Dilution Buffer

50.0 g

Extraction

powder

1. Open the lid of theMycomaster readerand put in the Fumonisin test strip.

Fumonisin Flow Chart (2:5 Extraction)1

Sample Preparation

Weigh50 g of ground sample

Add 2 packets of extraction powder

2. Select and fill in the test data on the touch screen of Mycomaster.When finished peel the tape of the Fumonisin strip.

3. Pipet 300 μl dilutedextract into samplecompartment and reseal the tape.

4. IMPORTANT:Make sure to pipet slowlyand upright! If not done properly an INVALID RESULT will appear.

ResultRange of Fumonisin with 2e diluted extract between 250-6000 ppb. Check TOXO dosage advise.

Add250 ml still bottled water

ExtractShake vigorously for at least 1.5 minutes; do not exceed 2.5 min

ClarifyCentrifuge for 20 seconds

FilterPass extract through 0.45 μm filter

Shake

1e dilution extract

Prepare1,200 μl diluted extractShake for 5 seconds

200 μl Extract

+1,000 μl FUMQ-WET

Dilution Buffer

Trouw Nutrition is not responsible for the outcome of the measured values of Mycomaster.

Prepare1,000 μl 2e diluted extract. Shake for 5 seconds.

1: for the right dilution per commodity see Appendix 1.

do

cum

ent

ID: F

low

cha

rt-m

yco

ma

ste

r-S5-

2.5-

2017

v2-14

130

Test Procedure