- 8 - - 9 -

- 2 -

- 4 -

- 15 -

- 13 -

- 6 - - 11 -

ContentPackage content 3Product description 3Getting started 4 Charging the projector 4 Attaching the tripod stand to the projector 4 Turning the projector ON and OFF 4 Connecting the cables 5 - Connecting to media and entertainment 5 devices that support TV/AV Out - Connecting to mobile phones and digital 5 cameras that support TV/AV Out - Connecting to a PC’s USB port 6 Installing the USB driver and USB Video 6 Projector utility on a PCAdjusting the projector’s default settings 8 Slide show settings 8 Language settings 8 Screen saver settings 8 Keystone settings 8 Default settings 8 Operating the projector 9 Adjusting the projected image size and focus 9

AV IN mode 9 CARD mode 9 - Using external USB storage media 9 - Using removable microSD memory cards 9 - Using the built in Flash memory 9 - Showing Photos 10 - Playing Music 11 - Showing Movies 12 - Projecting the screen content from a PC / 13 notebook - To copy, add and remove files on the 13 projector from the PC - To use the Copy and Delete functions of 13 the projector Using the USB Video Projector utility on the 13 PC - Capture tab 14 - Device tab 15 - Preview tab 15 - VPlayer tab 15Notes 16Technical Specifications 16Trademarks and Notices 16

Getting started

Charging the projector

Before using the projector the built-in battery should be fully charged. 1. Make sure the 3-way mode selector switch (5) is in its OFF position 2. Plug the connector of the Power Adapter (B) into the DC IN jack (10) and plug the adapter into an electric power outlet 3. When charging for the first time, let the K1511 charge continuously for 4 hours 4. The way in which the four Navigation keys (6, 7, 8, 9) glow indicate the status of the built-in-battery o Steady RED = charging o Steady BLUE = fully charged / operating on battery o Flashing BLUE = low battery

Attaching the tripod stand to the projector

A flexible tripod to adjust the position of the projector is included in the kit. It is easily mounted just be screwing it to the bottomof the projector. Adjust the legs until the projector stands in a stable position.

Turning the projector ON and OFF

1. The K1511 is turned on by sliding the 3-way mode selector switch (5) either to the AV IN or to the CARD position 2. The K1511 is turned off by sliding the 3-way mode selector switch (5) back to its OFF position

Connecting to a PC’s USB port Using USB the projector can either show the screen content of the PC (“USB Display” mode) or appear as a removable storage attached to the PC (“USB Storage” mode). This is further explained in subsequent sections of this User Guide. 1. Connect the mini USB connector of the USB Adapter Cable (F) to the projector 2. Connect the USB male connector at the other end of the cable to the PC

Installing the USB driver and USB Video Projector utility on a PCThe USB Video Projector (UVProjector) is the User Interface on the PC that manages the way the screen content of your PC is projected. The UVProjector installation filesand the required USB drivers are supplied on the projector’s internal memory and areinstalled when the projector is connected to the USB port of your PC. 1. Slide the 3-way Mode selector switch to its CARD position 2. Connect the PC and the projector with the provided USB-mini USB adapter cable (F) 3. Press and hold the key (7) for 3 seconds, and the display will show a Source selection menu 4. Select the “USB storage” option and press the key (7) to confirm 5. A message will confirm that the PC is connected (provided the USB cable remains connected and the PC is turned on) 6. The PC will recognize two new devices with removable storage; a “CD Drive” containig the UVProjector installation files and a “Removable Disk” to be used for content files such as photos and movie files. 7. The PC will normally auto install the USB driver and the UVProjector utility onto the PC. This depends however on the settings of your PC. If it does not install automatically, then the setup can be initiated manually from the PC by first locating the projector memory which appears as a new CD drive and then double-click on a file named UVPJInstaller.

Playing Music

From the Media Menu

1. Highlight the Music icon and press key (7) to select

2. Press key (9) or key (6) to highlight the desired music file and press key (7) to play the music

3. When playing music, press M key (8) to clear the navigation bar

4. When the navigation bar is cleared, press M key (8) again to return to Media Menu

The navigation bar’s functions are: Previous, Next, Pause/Play, Stop, Replay/Shuffle/ Continuous.

The audio level is adjusted with the volume up + (3) and and volume down – (4) keys on the left side of the projector.

Operating the projector Adjusting the projected image size and focus • Place the projector on a distance that provides the desired image size • The ideal size should be in the range of 0.13 to 1.9 meters (5” to 73”) • If using a tripod then also fix its legs in a stable position • Adjust the FOCUS wheel (2) to a position where the projected image is sharpAV IN mode 1. Connect either of the included AV Cables to the AV IN jack (12) 2. Connect the other end of the AV Cable to the TV/AV Out enabled media source/host device 3. Slide the 3-way mode selector switch (5) to its AV IN position 4. Make sure the video and audio outputs from the media source are activatedCARD modeUsing external USB storage media 1. Attach the USB Adapter cable (G) to the miniUSB port (13) of the projector 2. Connect any USB storage to the female USB connector at the other end of the USB Adapter cable (G) 3. Slide the 3-way mode selector switch (5) to the CARD position 4. The Home Menu is displayed by default 5. Press key (9) or key (6) to highlight the USB icon and then press key (7) to select 6. The Media Menu is displayed 7. Press key (9) or key (6) to highlight either the Photo, Music, Movie or File icon and press key (7) to select 8. Press the M key (8) to exit and return to the previous menu Do not remove the USB cable or the USB storage before sliding the 3-way mode selector switch(5) to its OFF positionUsing removable microSD memory cards 1. Insert the microSD memory card into the TF card slot (14) 2. Slide the 3-way mode selector switch (5) to its CARD position 3. The Home Menu is displayed by default 4. Press key (9) or key (6) to highlight the SD/TF icon and then press key (7) to select 5. The Media Menu is displayed 6. Press key (9) or key (6) to highlight either the Photo, Music, Movie or File icon and press key (7) to select 7. Press the M key (8) to exit and return to the previous menu Do not remove the memory card from the card slot before sliding the 3-way mode selector switch(5) to its OFF positionUsing the built in Flash memory 1. Slide the 3-way Mode selector switch (5) to its CARD position 2. The Home Menu is displayed by default 3. Press key (9) or key (6) to highlight the Flash icon and then press key (7) to select 4. The Media Menu is displayed 5. Press key (9) or key (6) to highlight either the Photo, Music, Movie or File icon and press key (7) to select 6. Press the M key (8) to exit and return to the previous menu

Adjusting the projector’s default settings 1. Slide the 3-way mode selector switch (5) to its CARD position 2. The Home Menu is displayed by default 3. Press key (9) or key (6) to highlight the Setup icon and then press key (7) to select 4. The Setup menu is displayed 5. Press key (9) or key (6) to highlight either the Slide show, Language, Screen Saver, Keystone or Default icon and press key (7) to select. Proceed as instructed under each section below. 6. Press the M key (8) to exit and return to the previous menuSlide show settingsThe way Photos are shown in a slide show can be adjusted in terms of transition speed and style. From the Setup menu 1. Highlight the Slide show icon and press (7) to select 2. Press key (9) or key (6) to scroll horizontally and highlight either settings for the Slide show speed, Transition or Display mode and press key (7) to select 3. Press key (9) or key (6) to scroll vertically and highlight the desired value of the selected settings and press key (7) to select 4. Press M key (8) to return to the horizontal scrolling and proceed as described from step 2 to adjust the other Slide show settings 5. When done press M key (8) again to return to the previous menuLanguage settingsFrom the Setup menu 1. Highlight the Language icon and press key (7) to select 2. Press key (9) or key (6) to scroll vertically and highlight the desired language and press key (7) to selectScreen saver settingsFrom the Setup menu 1. Highlight the Screen saver icon and press key (7) to select 2. Press key (9) or key (6) to scroll vertically and highlight the desired language and press key (7) to selectKeystone settingsProjecting in a vertical angle makes the image misaligned. The sides of the image can be re-aligned by adjusting the Keystone settings.From the Setup menu 1. Highlight the Keystone icon and press key (7) to select 2. Press key (9) or key (6) and repeat until the keystone degree is adjusted to the desired level slide bar 3. When done press M key (8) to return to the previous menuDefault settingsFrom the Setup menu 1. Highlight the Default icon and press key (7) to select 2. Press key (9) or key (6) to highlight either Yes or No. Selecting Yes will reset all projector settings to default values 3. When done press M key (8) to return to the previous menuThe projector’s model name and firmware version is also displayed here.

Projecting the screen content from a PC / notebook1. Make sure the UVProjector utility is installed on the PC,as described in previous sections2. Start the UVProjector utility on the PC by double-clicking on its desktop icon or selecting it under Windows’ Start menu 3. On the projector, slide the 3-way Mode selector switch (5) to its CARD position4. The projector will display the Home Menu by default5. Connect the PC and the projector with the provided USB-mini USB adapter cable(F)6. Press and hold the key (7) for 3 seconds, and the projector will display a Source selection menu7. Select the “USB Display” option and press the key (7)8. The PC’s screen content is now also displayed by the projector. If not, please make sure the UVProjector utility is activated on the PC and the USB cable is properly connected in both ends (PC and projector)9. Adjusting the projection settings is described in a subsequent section10.To stop projecting the PC’s screen press M key (8) to exit and return to the Media MenuNote: the projector will not recognize an attached PC unless the UVProjector utility is active on the PCTo copy, add and remove files on the projector from the PC1. Slide the 3-way mode selector switch (5) to its CARD position2. The Home Menu will be displayed by default3. Connect the computer and the projector with the provided USB-mini USB adapter cable (F)4. Press and hold the key(7) for 3 seconds 5. Options; “DPF”, “USB Display” and “USB Storage” are displayed6. Press key (9) or key (6) to highlight the “USB Storage” option and press key (7) to select7. The PC will recognize the projector’s flash memory as an external “Removable Disk”8. From the PC the desired files can now be copied, added or removed9. Press M key (8) to exit and return to the Media MenuNote: do not disconnect the USB cable until the file transfer is completed.To use the Copy and Delete functions of the projectorFrom the Media Menu1. Press key (9) or key (6) to highlight the File icon and press key (7) to select 2. The File management menu will be displayed3. Select the desired file, and press key (7)4. Select either the Copy or the Delete option and press key (7) to confirm5. Upon completion press M key (8) to exit and return to the Media Menu

Device tab

• When the projector is connected to a PC the UVProjector will detect it automatically

• A successful connection is indicated by a green indicator followed by the connected device’s name• The Video Quality and other general settings can be adjusted here

Preview tab• Under the Preview tab the selected content can be previewed before projecting it

VPlayer tab • Under the VPlayer tab a Movie file on the PC can be selected and controlled by Play, Pause, Stop etc. buttons (further explained under Video Player in the Capture tab section)

Front Back

- 7 -- 10 -

- 3 -

- 16 -

- 5 -- 12 -

User GuideYOYOViewerMini Multimedia Projector K1511

Notes• Do not try to open or repair the unit yourself. The projector is a highly sophisticated computer controlled unit. Any attempts of opening the unit voids the warranty and may cause serious damage.• If you are not certain of any problems that occur with the projector, contact your sales agent / local service centre.• Dropping the product from any height may cause severe damage.• Avoid exposing the K1511 to temperature above 50˚C.• Ideal charging temperature is between 15˚C and 35˚C.• The battery is low, when the blue color lights of the four navigation keys start to flash; also a low battery icon will appear at the upper left corner of the displayed image.• If the projector does not project properly, please check: o that the 3-way mode selector switch (5) is not in its OFF position, or o that the battery is not too low (indicated by flashing blue light by the navigation keys), or o that the battery is not exhausted• If the projector does not project properly when the AC / DC power adapter is connected, please check: o that the AC power source is valid, or o that the power adapter is firmly connected to the power source, or o that the power adapter is the correct type• If the projector does not project properly when the AV IN source is plugged in, please check: o that the 3-way mode selector switch (5) is in its AV IN position

Trademarks and NoticesAny product names mentioned in this guide are trademarks of their respective companies. This documentation is published without warranty. The information in this document may change without notice due to typographical errors, inaccurate information, or improvements to programs and/or equipment.

Technical SpecificationsDisplay Technology LCoS Technology

LEDLight Source

Resolution VGA 640 x 480 pixels

10 LumenBrightness (Typical)

Frame Rate 50/60 PAL & NTSC compatible

24-bit RGBColor depth

Image Size (Diagonal) 5” at 0.2 m distance / 73” at 3.0 m distance

0.2 m to infinityProjection Distance

Uniformity 90%

Manual FocusFocus

I/O Connection AV cables, USB cables

1 x 0.5W amplificationSpeaker

Weight 168g with battery

117mm(L) x 62mm(W) x 20mm(H)Dimensions

Battery Built-in 3.7V rechargeable Lithium-polymer

AC 110V to 240VPower Supply

JPEG / BMP (baseline format)Picture

MP3 (64-320kbps at constant and variablebit rate) / WAV / WMA (64-384kbps) / OGG

Audio

RMVB / MPEG4 (DVIX4\5\6,XVID,H.263+)

* Further information can be found under the support pages at www.yoyomotion.com

Video *

MS Windows 2000, XP, Vista and 7Supported OS (for USBprojection)

Supported memory card microSD card / TF card

Supported File Formats

Copyright, 2010 VTC Technology Co., All rights reserved.

Connecting the cablesConnecting to media and entertainment devices that support TV/AV Out Most devices that support TV/AV Out have colour coded connectors. They are referred to as RCA connectors and the yellow connector delivers a Composite Video signal, while the white and the red ones deliver the left and right audio channels. 1. Connect the AV Cable (C) to the projector’s AV IN jack (12) 2. Connect the three colored (yellow, white and red) RCA connectors to the connectors of corresponding color of the host device (please refer to the host device’s documentation to verify if further adapter cables or connectors are required) 3. Make sure the host device has the TV/AV Out port and function activated

Connecting to mobile phones and digital cameras that support TV/AV Out Modern high-end mobile phones and portable media players support TV/AV out through a 4-pole 3.5 mm socket. This is also the case for many digital cameras. The configuration of the 4 poles may vary but the majority follows the same standard. The 3.5 mm to 3.5 mm AV cable (D) that is included in the K1511 kit is designed to work according to this standard. 1. Connect the AV Cable (D) to the projector’s AV IN jack (12) 2. Connect the other end of the AV Cable (D) to the host device 3. Make sure the host device has the TV/AV Out port and function activated

Yellow

Red

White

SCART and S-video interfaces are also supported but require 3rd party adapters(not included in the kit).

7. Follow the instructions on the PC

8. You will be asked to reboot the PC to finalize the installation of the USB Video Projector utility.

Showing Photos

From the Media Menu

1. Highlight the Photo icon and press key (7) to select 2. Press key (9) or key (6) to move to desired file folder / file and press key (7) to start the slide show 3. A navigation bar will appear at the bottom of the photo. If not used it will disappear after a few seconds

4. The navigation bar will also disappear by pressing the M key (8). It will appear again by pressing key (7)

5. When the navigation bar is cleared, press M key (8) again to return to the previous menu

The navigation bar’s functions are: Previous, Pause, Next, Stop, Zoom, Rotate and Adjust image

2. Press key (9) or key (6) to scroll and highlight the desired movie file and press key (7) to play the movieNote: scrolling may be slow if there are many and large moviefiles in the directory3. When playing the movie, press M key (8) to clear the navigation bar4. When the navigation bar is cleared, press M key (8) again to return to the Media MenuThe navigation bar’s functions are: Previous, Rewind, Pause/Play, Fast Forward, Next, Stop, Repeat /Shuffle/Continuous and Adjust Image.Indicators show elapsed time and audio volume. The audio level isadjusted with the volume up + (3) and volume down – (4) keys on theleft side of the projector.

Showing MoviesFrom the Media Menu 1. Press key (9) or key (6) to highlight the Movie icon and press key (7) to select

Package content(A) K1511 Projector(B) Power adapter AC/DC(C) AV Cable 3.5mm 4-pole to 3 X RCA female(D) AV Cable 3.5mm 4-pole to 3.5mm 4-pole(E) Tripod with screw(F) USB Adapter Cable – mini USB to USB 1.1/2.0 male(G) USB Adapter Cable – mini USB to USB 1.1/2.0 female(H) User Guide (this document)(I) Protective pouch

Product description

(1) Projector lens(2) Focus wheel: FOCUS(3) Volume up: +(4) Volume down: -(5) 3-way mode selector switch: AV IN / CARD / power OFF(6) Navigation key Backward / Previous: (7) Navigation key Play / Pause / Stop: (8) Navigation key Mode / Exit: M(9) Navigation key Forward / Next: (10) Power in jack: DC IN(11) Audio out jack: Ω(12) Audio & video in jack AV IN(13) Mini USB port(14) Memory card slot (microSD / TF card): TF card(15) Speaker

• Video Player – play and project supported video content from the PC – when the Video Player option is ticked in, the VPlayer tab will appear – under the VPlayer tab, browse any storage media of your PC and select a Movie file to be played – use the Video Player controls (Play/Pause, Stop, Rewind, Frame-by-frame, Fast back, Fast forward)

• Full Screen: – project the screen of the PC – select from the drop-down menu which resolution you want your PC Screen to show while projecting

• Region: – project a portion of PC screen – press the Pan button to further adjust which portion to project. Grab and drag the handles of the Pan-frame to narrow- in the desired portion. – press the Reset button to go back to the original Pan setting – press the 2x button to magnify the projected Pan image

- 14 -

Using USB Video Projector utility on the PCThe USB Video Projector utility (UVProjector) on the PC is used to control the projection when the projector is in its “USB Display” mode (as described above).Capture tabThe way PC content is projected can be controlled by using different options of the USB Video Projector: