Embed Size (px)
Citation preview
YOUR GROUND
DRILLING PARTNERS
www.fastboring.com
INDEX
www.fastboring.com
2. ABOUT US 3. OUR SERVICES 4. OUR LOCATION 5. HORIZONTAL DRILLING 6. DIRECTIONAL BORING PROCESS 9. HDD DRILLING METHOD 12. MACHINE DETAILS 13. POLYETHYLENE PIPE CONDUIT 14. FINAL STAGE OF ELECTRICAL CABLE PULLING 15. TELECOMMUNICATION
16. TELECOM INSTALLATION 17. GAS PIPE INSTALLATION 18. WASTE WATER PIPE INSTALLATION 20. PHOTO GALLERY 27. OUR LICENSE 29. MANAGEMENT & STAFF 30. EQUIPMENTS & MACHINE LIST 31. OUR PROJECTS 32. CONTACT US 34. THANK YOU
Fast Boring Service Line Coring & Ditching Contracting is one of the leading companies in Horizontal Directional Drilling and was APPROVED by Abu Dhabi Municipality. We have ongoing projects in Dubai, Abu Dhabi & Al Ain for DEWA and other pipe laying services. Our drilling team includes 2 RTA ( Roads & Transport Authority – Dubai ) Approval has expertise in drilling, we have 2 sets of Boring Machines & equipment by German and American Experts. With having Abu Dhabi Municipality Approval & extensive experience and knowledge makes our staff leading in boring and drilling throughout UAE. We are laying HDPE pipe from 75mm to 1000mm under all kinds of road by Horizontal Drilling Method. At present we have the latest Vermeer Directional Drilling machine and latest accessories. With our Expert Employees we will be able to meet a successful requirement of all our clients. If you need any information, you are welcome to contact us at Tel. No. 04-4267084 Fax No. 04-4269094 or Mobile No. +971-504434420 Email: [email protected] and visit our website www.fastboring.com. And we shall be very pleased to provide you with all details that may need and rest assure that we shall do our best service. Looking forward to hear from you soon. Kind Regards, Omar Salem Al Dahmani Owner and CEO Mobile No. +971504434420
ABOUT
US
www.fastboring.com
Services Installation & Repair of Oil & Gas Pipelines.
Installation & Repair of Water Pipelines.
Installation & Repair of Sewerage Pipelines.
Installation & Repair of Electric Services Pipelines.
Installation & Repair of Telecommunication Pipelines.
SERVICES
www.fastboring.com
FAST BORING LOCATION
GCC
United Arab
Emirates
www.fastboring.com
ABOUT
US
HORIZONTAL DIRECTIONAL DRILLING Fast Boring Services Line Coring and Ditching Contracting are dealing with “HORIZONTAL DIRECTIONAL DRILLING” by latest and modern technologies, capable to work on hard rocks, sand areas and under water. Innovative processes for laying out pipes such as HDPE and Steel with well qualified personnel who can assist in finding solution in any type of boring works with the most suitable Horizontal Drilling Machine along with a number in many advantages like trenchless, ecological, economical, safe and fast way of boring results. BORING PATH The bore path entry pit to exit pit must be planned before the boring begins. It can be marked on the ground with chalk dust or written in paper for operator references. For complicated bores it must consult to engineer, have job site surveyed and bore path calculated. Be sure engineer knows the minimum entry pit bend limits of drill pipes and pullback material, pipe lengths and location of all underground utilities. For less complicated path, bore will be limited in four measurements; recommended bend limits, entry pit, minimum set back and minimum depth. Recommended bore limits must be considered during bore entry.
www.fastboring.com
DIRECTIONAL BORING PROCESS
ABOUT
US
www.fastboring.com
DIRECTIONAL BORING PROCESS
ABOUT
US
www.fastboring.com
DIRECTIONAL BORING PROCESS
ABOUT
US
www.fastboring.com
ABOUT
US
HDD DRILLING METHOD Fast Boring is one of the pioneers of Horizontal Directional Drilling (HDD) in the U.A.E. As techniques and working methods have improved, the Horizontal Directional Drilling operation has become a major contribution to the Non-Disruptive Road Crossing (NDRC) division. The process generally includes five distinct phases are as follows: 1. Planning, Preliminary survey. 2. Selecting the drilling units and drilling tools. 3. Drilling a small pilot bore hole, using technology that allows the drill to be steered and tracked from the surface. 4. Enlarging the hole by pulling back increasingly large reamers. (Back reaming or upsizing bore) 5. Pulling in the pipe. A well planned HDD Operation includes preliminary survey of the bore path area, concerning other existing lines and the soil condition. Locating all existing services and plotting them on a drawing, then plan the best drilling path and include on the latest drawing to avoid all affected existing services.
www.fastboring.com
ABOUT
US
HDD DRILLING METHOD
www.fastboring.com
ABOUT
US
HDD DRILLING METHOD The Choice of the drilling unit depends upon the bore length, the diameter of the pipe to be installed and the soil quality. It is important to choose the correct Drilling unit and tools for suitable bore length, and conditions. Site operation starts with drilling of the pilot hole from the surface on one side of the obstacle to be crossed. Continuous drilling along a designed profile below and beyond the obstacle, and to exit at the surface on the other side drilling pilot bore hole. The pilot bore is launched from the surface at an angle between 5 and 15 degrees to the horizontal, and transitions to horizontal as the required depth was reached. A bore path of very gradual curvature or near straight alignment is normally followed to minimize friction and to stay within the allowable joint defection and the allowable bend radius for the pipe. This minimizes the chance of getting the pipe string “hung up” in the soil or damaging the pipe string.
www.fastboring.com
ABOUT
US
MACHINE DETAILS
www.fastboring.com
ABOUT
US
POLYETHYLENE PIPE CONDUIT Note the polyethylene pipe conduit specified has proved to be adequate for the minimum depths required. However, deeper installations including crossing under built-up roads, creeks etc may require a thicker wall conduit due to the deformation caused by factors such as the high bearing pressure of the ground / water. The Contractor is responsible for assessing whether or not the specified conduit is adequate for the particular application and is to provide a conduit of sufficient wall thickness to ensure undue deformation does not occur. Should installed conduit be deformed to the extent that cable cannot be installed, or cannot be installed without undue difficulty, the Contractor shall return and install an adequate polyethylene conduit at no cost to Ergon Energy. The timing of such installation shall be at the discretion of the Liaison Person. As a minimum, conduit shall be polyethylene pressure pipe complying with AS/NZS 4130, having minimum performance equivalent to PE80 material, classification PN10. In addition, conduit shall meet the following requirement: • Colored orange over the entire outer surface. Co-extruded pipe is acceptable. • Marked ‘ELECTRICAL’ in accordance with AS/NZS 2053 • Suitable for the mechanical forces of installation. Note the internal diameter of polyethylene pressure pipe specified above is considerably less than comparable diameter Light Duty, rigid orange PVC to AS/NZS2053.
www.fastboring.com
ABOUT
US
FINAL STAGE OF ELECTRICAL
CABLE PULLING
SUMMARY Fast Boring Services have completed pulling and laying polyethylene 4 lines of electrical conduit pipe. We completed the work and contract successfully and properly done, with the help of our excellent employees with a great success. Procedures of Installation are as follows; The initial drilling pivot head is 100 mm Followed by 120 mm reamer Then pulled 100 mm polyethylene conduit pipe Last is pulling of electrical cable
www.fastboring.com
ABOUT
US
TELECOMMUNICATION Directional Drilling Projects has completed many projects within the telecommunications industry where we have completed work for most of the leaders within the industry. Directional Drilling Projects has completed small crossings where we had to drill under a single lane road up to 400m river crossings whereby we had to pull in three 110 mm HDPE sleeves. These crossings where completed in various soil conditions as well as in toughest rock conditions.
www.fastboring.com
ABOUT
US
TELECOM INSTALLATION WE CAN PROVIDE Using our varying methods and with our wealth of experience at SW Directional Drilling we can install Telecom Ducting to meet any clients needs. With vast experience in this sector (over 300 installations) and through working on some major contracts over the years for major telecom suppliers, we can meet any voice/ data supply demand.
www.fastboring.com
ABOUT
US
GAS PIPE INSTALLATION PIPE INSTALLATION Our Team is highly experienced, technically adept and efficient in all aspects of pipeline installation. Fast Boring Services Line Coring and Ditching Contracting, is any to provide or all of the following; Design, Feasibilities, Procurement, Installation, Reinstatement Horizontal Directional Drilling (HDD) HDD is applicable technique designed to install pipelines under obstruction, rivers, roads, railways, runways, estuaries, sites of scientific interest, farmland and even pipelines. The principle is simple and yet skill and experience is required to get it absolutely right is significant.
In the simplest terms, HDD installation is achieved in just Three Stages; Stage 1 Pilot is properly drilled in entry pit considering the allowable depth from the ground surface Stage 2 The hole is reamed out to the required diameter to accommodate the product pipe Stage 3 Finally the pipeline is pulled or pushed through the pre drilled hole at exit pit
www.fastboring.com
ABOUT
US
WASTE WATER PIPE INSTALLATION
The Project It is consisted of 600 mm diameter HDPE Pipe using Horizontal Directional Drilling. Our company provided specialist drilling services and managed drilling site and HDD works. HDD Works Objective HDD enabled the plan to create a secure route without disturbing the plant and was then pulled through the prepared hole completing the installation with no risk of confidence or post construction settlement.
www.fastboring.com
ABOUT
US
WASTE WATER PIPE INSTALLATION Project Management One key element of the project was to minimize the impact on the local environment. By adopting strict Traffic management and environmental controls, the local environment and community remained undisturbed throughout the entire drilling process.
www.fastboring.com
O U R T E A M
COMPANY NAME
www.fastboring.com
M A D I N A T Z A Y E D C I V I L D E F E N C E
www.fastboring.com
M A D I N A T Z A Y E D C I V I L D E F E N C E
www.fastboring.com
M A D I N A T Z A Y E D M I L I T I R Y S C H O O L
www.fastboring.com
G C C N I A M I R F A P O W E R S T A T I O N
www.fastboring.com
www.fastboring.com
G C C N I A M I R F A P O W E R S T A T I O N
D U F O C C O N N E C T I O N A B U D H A B I C I T Y
www.fastboring.com
A L R U W A I S
www.fastboring.com
A L R U W A I S
www.fastboring.com
www.fastboring.com
COMPANY LICENSE
DUBAI
COMPANY LICENSE
DUBAI
www.fastboring.com
COMPANY LICENSE
DUBAI
www.fastboring.com
COMPANY LICENSE
AL AIN
COMPANY LICENSE
AL AIN
www.fastboring.com
COMPANY LICENSE
AL AIN
STORE LICENSE
www.fastboring.com
STORE LICENSE
ITEM DESCRIPTION QUANTITY
1 Owner 01
2 Project Manager / Operation Manager 01
3 Civil Engineer / Technical Manager 03
4 Safety Engineer / Site Engineer 03
5 PRO 01
6 Accountant 01
7 Operator / Assistant Operator 02
8 Locators 02
9 Drivers 02
MANAGEMENT & STAFF
www.fastboring.com
ITEM DESCRIPTION QUANTITY
1 Horizontal Directional Drilling Machine (Vermeer) 02
2 Bentonite Mixer 04
3 Water Tanker 04
4 Low Bed 02
5 HDPE Welding Machined for more than 1000mm Dia 01
6 Generator Out Put 5000c watts 02
7 Locator F5 Beacon Tracker 02
EQUIPMENTS AND MACHINE LIST
www.fastboring.com
O U R P R O J E C T S
www.fastboring.com
Company Name Projects
Nationwide
Raha Beach Baraha, Abu Dhabi (2-way)
Airport road, Abu Dhabi (4-way)
AUH-2055 Du FOC Connection (4-way)
Al Ruwais (3-way & 2-way)
Incon
Military School Western Region, Abu Dhabi
(2-way)
Ras Al Khaimah (2-way)
EMC Jupiter
Al Sila’a , Abu Dhabi (6-way)
Khalifa City (2-way & 3-way)
Al Aberah
CNIA Mirfa Power Station, Abu Dhabi (2-way)
FIND US
CONTACT INFORMATIONS
12th Floor 1201 Yes Business Center Al Barsha / Dubai
+971 4 426 7084
YOURMOBILE
www.fastboring.com
www.fastboring.com
M A I N C O N T A C T S
Mr. Omar Salem Al Dahmani C.E.O
+971-50-443-4420
www.fastboring.com
THANKS
FOR
WATCHING
www.fastboring.com
