Upload
ahsan-sarfaraz
View
216
Download
2
Embed Size (px)
DESCRIPTION
DGDF
Citation preview
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
1
Drill Pipe
We possess America MTI inertia friction welder, which guarantes the quality of welding. Adopting the advanced
technology of high power collector coil to narrow the heat affected zone, and internal and external heating
processing simultaneously, makes friction welding zone even and stable. The welding seam is esthetic and
beautiful, which extended the service life of the drill pipe. Our annual production is 20,000 tons and various
mechanical properties all meet API Standard requirements.
Technical specifications as following
Size
Weight
Calculated weight
Grade
Wall thickness Type of
upset In. mm Ib/ft Kg/m In. mm
23/8 60.3 6.65 6.26 9.32 E,X,G,S 0.280 7.11 EU
27/8 73.0 10.4 9.72 14.48 E,X,G,S 0.362 9.19 EU
31/2 88.9 9.50 8.81 13.12 E 0.254 6.45 EU、IU
31/2 88.9 13.30 12.31 18.34 E,X,G,S 0.368 9.35 EU、IU
31/2 88.9 15.50 14.63 21.79 E 0.449 11.40 EU
31/2 88.9 15.50 14.63 21.79 X,G,S 0.449 11.40 EU
4 101.6 14.00 12.93 19.26 E,X,G,S 0.330 8.38 EU、IU
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
2
Heavy Weight Drilling Pipe
Specifications for heavy weight drilling pipe as following
Type
O.D. I.D.
Tool joint Pipe body
Single
weight(kg) Type
O.D. Center wear
pad
mm in mm in mm in Center
(mm)
End
area
(mm)
M-JZ55-51/2FH-1 139.7 5 1/292.1 3 5/8 5
1/2FH177.8 7 152.4 144.5 730
M-JZ50-NC50-1 127.0 5 76.2 3 NC50
4 1/2IF168.3 6 5/8139.7 130.2 700
M-JZ45-NC46-1 114.3 4 1/271.4 2
13/16
NC46
(4IF) 158.8 6 1/4127 117.5 585
M-JZ35-NC38-1 88.9 3 1/252.29 2 1/16 NC38 120.7 4 3/4101.6 92.1 370
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
3
J55 oil casing
Widely used in oil, natural gas, gas, water supply, power generation, hydropower station, pressure pipe, thermal
power, dredging projects and other basic engineering.
Keywords:API 5CT Steel Pipe, J55,K55,L80,N80Q,C90,T95,P110 Oil/Petroleum Casing Pipe, OCTG
1) Grade: J55,K55,L80,N80Q,C90,T95,P110
2) Size: 4 1/2", 5", 5 1/2", 6 5/8", 7", 7 5/8", 9 5/8", 10 3/4", 13 3/8", 16", 18 5/8", 20"
3) Wall thickness: 6.35 - 12.70 mm
4) Thread type: STC, LTC, BTC
5) Length: R1,R2,R3
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
4
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
5
Epoxy powder coating anticorrosion tubing
Serial number Project Quality index Execution standard
1 Impact strength More than 11J Q/SJ0084-2003
2 Wear resistance (1000g, 1000 rpm) Less than 20mg GB/T1768-1979
3 Adhesion 1 ~ 3 GB/T5210-1985
4 Pin number Less than 1 /m2 SY/T0063
5 Coating thickness 300 ~ 250 m SY/T0066
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
6
API oil casing
1. high corrosion resistance;
2. excellent wear resistance, wear resistance;
3. outstanding anti adhesion;
4. wide range of high temperature resistance, can be used for the injection of steam gas wells.
Name Specification in Outer diameter Wall thickness mm Head form Steel grade
Tubing 2 3/8 60.32 4.24 - 7.49 NU, EU K55, J55, N80
Tubing 2 7/8 73.02 5.51 - 9.96 NU, EU K55, J55, N80
Tubing 3 1/2 88.90 5.49 - 12.09 NU, EU K55, J55, N80
Tubing 4 1/2 114.30 6.88 - 35.27 NU, EU K55, J55, N80
Spray box
Dimensions
Overall Height: 33.13” (studded flange x open flange)
Width: 59.56”
Thickness: 22.36”
Weight: 3300 lbs.
Connections
Common Top Connections: BX-155 10KPSI Studded Flange
Common Bottom Connections: BX-155 10KPSI Studded or Open Flange
Side Injection Port: BX-152 10K Studded Flange with a BX-152 10K x 2” 2202 Female Crossover
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
7
Casing head and Vavle
threaded casing hanger W-type slip casing hanger WE-type slip casing hanger slip casing hanger
WD type Kava casing hanger welded connection mud gate valve Plug Valves
Mud gate valve union connection high-pressure safety valve rolling throttle
manually adjustable throttle Fixed throttle Single flow valve
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
8
KVL/M Gate Valves
The valve body applied the impact forging with compressed material to be shaped at one time. The valves can be
used in controlling pipelines and other equipment to cut and connect the flow liquid with both rising and non-rising
stem valves; and manual and hydraulic operated methods.
Nominal Diameter:1-13/16"~4 -1/16"
Nominal Pressure:2,000Psi~20,000Psi
Material class:AA~HH
PSL class:PSL1~4
PR class:PR 1~2
Medium:Petroleum oil, natural gas, water, mud
End connection:API standard connection
Pneumatic Safety valve
The Pneumatic safety valve is mainly used on the wellhead X-mas tree of ocean, offshore platform or onshore,
whose function is when fire hazard or abnormal high or low pressure happened, it can close the safety valves
automatically according to set procedure to ensure the wellhead safety;
Nominal Diameter:2-1/16"~4-1/16"
Nominal Pressure: 2,000Psi~10,000Psi
Material class:AA~HH
PSL class:PSL1~4
PR class:PR 2
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
9
Medium:Petroleum oil, natural gas, water, mud
End connection:API standard connection
Hydraulic safety valves
The Hydraulic safety valves is a kind of hydraulic valves to be installed on the wellhead main pass or production
pass, whose function is when there is leakage or other abnormal condition happened of wellhead, it can close the
well by releasing the oil cylinder pressure to shut the valve;
Nominal Diameter]:2-1/16"~4-1/16"
Nominal Pressure: 2,000Psi~15,000Psi
Material class:AA~HH
PSL class:PSL1~4
PR class:PR 2
Medium:Petroleum oil, natural gas, water, mud
End connection:API standard connection
Check Valve
The design and production of the product completely meets the requirements of API Spec 6A: Wellhead and
Christmas tree specification. In accordance with API Spec 6A specification form a complete set of equipment and
used interchangeably at home and abroad.
Working Pressure:2,000Psi~20,000Psi
Nominal Diameter:2-1/16 "~4-1/16 "
Working Temp. : KU (-60℃~121℃)
Working Medium:oil、gas、mud
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
10
PSL Class:PSL1~4
PR Class:PR1~2
Material Class:AA~HH
End Connection:API Spec connection
Fixed Choke Valve
Choke valve as the main parts of christmas tree and manifold, it is mainly used for controlling the wellhead flow and
its level of work pressure can be up to 15000 psi. Choke valve can be divided into adjustable choke valve and fixed
choke valve. Fixed choke valve is the main parts of the wellhead and christmas tree equipment, through special
tools to replace the size of the oil nozzle, and transform the throttling area of the liquid to control crude oil
production of the wellhead
Working Pressure:2,000Psi ~15,000Psi
Nominal Diameter:2-1/16″~4-1/16"
PR Class:PR1~2
PSL Class:PSL1~4
Working Temp.:KU (-60℃~121℃)
Working Medium:oil、gas、mud
Material Class :AA~HH
End Connection :connecting with ANSI and API standards
Nozzle aperture :Φ3, Φ4, Φ5, Φ6, Φ7, Φ8, Φ9, Φ10, Φ11, Φ12, Φ13, Φ14, Φ15, Φ16
Throttle choke valve
Throttle structure change the fluid flow and direction, fluid moving along the center line of cage by using fluid
mechanics principle , and avoid rush and corrosion, reducing motion noise.
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
11
Working Pressure :3,000Psi~20,000Psi
Nominal Bore :2-1/16"~4-1/16"
Working Temp :KU (-60℃~121℃)
Working medium:oil, gas, water, mud
PSL Class :PSL1~4
PR Class :PR1~2
Material Class :AA~HH
Actuator:Manual, hydraulic
End Connection:Conform to ANSI and API
Barrel Type Choke Valve
The cylinder gate, gap between gate and seat, interlinked between inlet and outlet. Mainly used in chock manifold
or other high pressure piping.
Working Pressure :2,000Psi ~20,000Psi
Nominal Size :2-1/16″~4-1/16 "
Performance Grade :PR1~2
Working Tem :KU ( -60℃~121℃)
Specifications Grade :PSL1~4
Working Medium: oil, gas, water, mud
Material Class :AA~HH
Actuator: handle, Hydraulic, pneumatic
End Connection:Conform to API
Needle Type Choke Valve
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
12
Exchanging the parts form fixed, adjusted choke valve.
Bonnet nut is to prevent the nut loosen and as an indispensable part
Befordromoving the nut completely, established the safety performance can release valve body residual stress
Interchangeable parts for specific pressure gauge, for example, the same empty cock and bonnet device used in
2,000-15,000 psi working environment Pointer and seat of stainless steel adjustable chock valve needle
Working Pressure :2,000Psi ~20,000Psi
Nominal Size :1.13/16"~7.1/16" (46mm~180mm)
PR Class :PR1~4
Working Temp:-46℃~121℃(LU)
PSL Class :PSL1~4
Working Medium: oil, gas, water, mud, gas with H2S,CO2
Material Class :AA、BB、CC、DD、EE、FF、HH
Orifice Plate Choke Valve
Orifice plate chock valve is molded by two very special tungsten carbide metal plates with impact damage
resistance. Changing the concentricity of the up orifice and down orifice by rotation of one of the plate, to achieve
the adjustment of liquid or gas flow.
Orifice plate chock valve is used for manifold equipment, such as drilling, fracturing, mud circulating, ground
high-pressure gas injecting and producing, etc.The most remarkable feature of the valve is that pressure difference
between inlet and outlet can press the two orifice together closely to realize the function of sealing and cutting off
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
13
when it is closed. Especially in emergencies such as sudden rise or sudden drop of the pressure because of
leakage, it closes and cuts off automatically through pre-set pressure signal value of high and low pressure sensor.
Thus, accidents can be avoided. The outstanding advantage of this valve is that, it has long service life, and
characteristics of damage and wear resistance compared with other kinds of choke valve.
Working pressure: 2,000Psi ~15,000Psi
Nominal diameter: 2-1/16″~4-1/16 "
PR Class: PR1~2
Working temp: KU (-60℃~121℃)
PSL Class: PSL1~4
Working medium: petroleum, natural gas, water, mud
Material Class: AA~HH
End Connection: API 6A standard connection
Annular BOP
Annular BOP is usually matched with ram BOP, and also, can be used separately, used to seal a variety of shapes
and sizes of the kelly, drill pipe、drill pipe sub、drill collar、casing etc; When there is no drilling tool, can be
completely close the wellhead. With the conditions of using buffer energy storage,Through 18°/35°no thin buckle
butt welded joint, forced tripping.
The annular BOP is only a transitional equipment in shut-in,not sealing with a long time; should use the ram BOP
when sealing well for a long time.
Working pressure :2,000psi ~ 15,000psi
Nominal Size :7 1/16”~ 21 1/4"
Working Medium :oil, gas, mud, Gas containing H2S, CO2
Working Tem.:T-75(-59℃~121℃)
Material Class :45K~75K
U type RAM BOP
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
14
Ram blowout preventer is an important component of well control equipment, mainly for drilling workover, test the
wellhead pressure control oil and other operations, effectively prevent blowout accidents, security construction.
Technical Parameters
Working Pressure:2,000psi ~ 15,000psi
Nominal Size:7 1/16”~21 1/4"
Working Medium: oil, gas, mud, gas containing H2S, CO2
Working Tem.:T-75 (-59℃~121℃)
Material Class:45K~75K
Choke Manifold
The chock manifold is to control the well kick, control the pressure of oil and gas well. Under the condition of BOP
closed, using the chock valve to ensure the certain casing pressure to maintain that the bottom hole pressure
always slightly greater than the formation pressure to avoid further formation fluid into the well. In addition, when
implementing shut-in, using the chock manifold to achieve soft shut-in. When the pressure in well is rising, using
the chock valve to release the pressure. The chock valve is divided into three types: manual adjustable, hydraulic
type and fixed type. When the borehole pressure rises to a certain limit, we can use chock manifold to open flow to
protect the well.
Working Pressure: 3,000psi~20,000psi
Nominal Size: 2 1/16"~4 1/16"
Tem. Grade:KU (-60 ℃~121 ℃)
Working Medium: oil, gas, mud, gas containing H2S, CO2
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
15
Kill manifold
Kill manifold is an important component part in the Wells pressure control equipment. When we can‘t get through
the normalcycle of the drill string, we can use kill manifold to pump into the drilling fluid in well to control pressure,
or we can blowout though the flow line it connect and we can pump into water and extinguishant. Fluid can only
one-way flow in kill manifold because of the non-return valve. Kill manifold is connected with drilling spool. The
other side is connected with slush pump.
Working Pressure: 2,000psi~15,000psi
Nominal Size: 2 1/16"~4 1/16"
Tem. Grade: PU (-29℃~121 ℃)
Working Medium: oil, gas, mud, gas containing H2S, CO2
Conventional Wellhead Christmas tree
We produced the Christmas tree for controlling the pressure of production well and production of oil and gas wells,
and can also be used acidification, fracturing, water, high temperature steam injection, and testing of special
operations; meet different conditions. Our company's products are of reliable sealing and safety during work; from
design, production, manufacture, testing, and other quality control process, in full compliance with the requirements
of API 6A latest version.
Specification: API 6A/ISO 10423,NACE MR 0175
Working medium: Oil, gas, mud, gas containing H2S, CO2
Working Pressure: 2,000PSI ~ 20,000PSI
Working Temperature: KU(-60℃ ~ +121℃)
Material level: AA~HH
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
16
Specification level: PSL 1~4
Performance levels: PR 1~2
Subsea
Shallow Water Mudline/Subsea and Christmas Tree system has gained increasing interest by oil & gas operator in
recent years due to the significant time savings compare to conventional surface platforms and cost savings
compare to deep water subsea systems. And with Kerui’s advanced technology, professional quality control and
service support, Shallow-water Mudline/Subsea and Christmas Tree Systems aims to provide the most
comprehensive product and service package to customers worldwide. Mudline/Subsea and Christmas Tree
System provides the full capability for Oil and Gas exploration, temporary abandonment and tie-back option for
production development. The system comes with metal and elastomeric sealing combination for enhanced
reliability. With the option of Diver assist, the system provides reliability to meet customer’s operational needs.
Fractuing track manifold
Fracturing Manifold is the surface device to contact the surface pipelines and the Fracturing trucks, whose function
is to piping the fracturing liquid to the target format, so it is required of high pressure resistance and less friction;
Fracturing manifold is made up of main body, control valves and unions; the main body is in a tree fork shape and
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
17
welled of excellent alloyed steel pipes or applies casted tees; the pressure resistance for the welding processing is
60 Mpa and for casting processing is 70Mpa. For the control valve, it is mainly made by ball valves or plug vale, the
pressure resistance capacity is 70 Mpa. During the fracturing operation, the fracturing truck and the control vales
end is connected by 2”union; the surface pipeline to the well is connect by 2 1/2”union; The release valve is to
release the rest pressure and liquid of manifold;
Crown block
In accordance with the standard of API 4F,8A and 8c.
The sheave rope groove through quenched processing with wear-resistance , long-life .
Equipped with bump-proof cushion devices .
The traveling sheaves of the crown and its auxiliaries can be replaceable .
The technology parameter
Model No. TC90 TC135 TC158TC170 TC225 TC315 TC450 TC675
Max. hook load (KN) 900 1350 1580 1700 2250 3150 4500 6750
O.D. of sheave mm(in)762
(30)
915
(36)
915
(36)
1005
(40)
1120
(44)
1270
(50)
1524
(60)
1524
(60)
Number of sheaves 5 5 5 6 6 7 7 8
Dia. Of wireline Mm(in) 26
(1)
29
(11/8)
29
(11/8)
29
(11/8)
32
(11/4)
35
(13/8)
38
(11/2)
45
(13/4)
Overall Dim.
Mm(in)
Length 2447
(963/8)
2320
(91
11/32)
2220
(87
7/16)
2668
(105)
2668
(105)
4330
(170
1/2)
3300
(130)
3928
(154
5/8)
Width 1695
(77 3/8)
1436
(56
17/32)
2144
(84
7/16)
2460
(97)
2709
(107)
2833
(111
1/2)
2902
(114
1/4)
3080
(121
1/4)
Height 1624
(63 7/8)
1781
(70 1/2)
1813
(71
3/8)
1855
(73)
2469
(97)
4239
(166
7/8)
3760
(148)
2915
(114 3/4)
Weight Kg 3260 2775 3603 4540 5650 7945 10625 15340
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
18
Traveling Block
Feature
In accordance with the standard of API 8A and 8c.
The sheave rope groove through quenched processing with wear-resistance , long-life .
Sheaves and bearings can be exchangeable by allocated crown sheaves and their bearings .
The technology parameter
Parameters
Model No. YG110 YG150 YG180 YC225 YC315 YC450 YC675
Max. hook load (KN) 1100 1500 1800 2250 3150 4500 6750
O.D. of sheave mm
(in) 605(24) 915(36) 1005(40) 1120(44) 1270(50) 1524(60) 1524(60)
Number of sheaves 3 4 5 5 6 6 7
Dia. Of wireline
Mm(in) 26(1)
26/29(1)
/(1 1/8) 29(1 1/8)
32
(1 1/4)
35
(1 3/8)
38
(1 1/2)
45
(1 3/4)
Overall
Dim.Mm(in)
Length 2334 2768 3469 2294 2690 3110 3410
Width 673 830 1100 1190 1350 1600 1600
Height 562 711 768 630 800 840 1150
Weight Kg 1424 2810 5146 3788 5500 8300 10800
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
19
Hook
Feature
In accordance with the standard of API 8A .
Especially built-in hollow with good hydro bump-absorbing capability .
The major hook has double safety devices .
The main components of the hook adopt high tense alloy and get through non-destructive testing
.
The technology parameter
Model No. DG315 DG450 DG675
Max. hook load (KN) 3150 4500 6750
Spring travel mm(in) 200(8) 200(8) 220(8 5/8)
Major-hook opening mm(in) 220(8 5/8) 220(8 5/8) 234(9 1/4)
Overall Dim mm
(length*height*width) 2960*890*830 2960*890*880 3705*1210*930
Weight KG 3410 3500 7065
Swivel
Feature
In accordance with the standard of API 8A
Double nipple can be selectable
Tail pipe and packing set are house-unified structure easy to be changed
Allocated with API 4LP hose adaptor.
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
20
The technology parameter
Model No. SL120 SL135 SL160
Max. static load (KN) 1200 1350 1600
Max. speed r/min 300 300 300
Max. working pressure
Mpa(psi) 35(5005) 35(5005) 35(5005)
Dia. Of stem mm(in) 54(2.13) 57(2.24) 57(2.24)
Coupling
thread
To stem
API 4 1/2 LH 4 1/2 REG,LH 4 1/2 REG,LH
To
kelly API 3 1/2 REG,LH 6 5/8 REG,LH 6 5/8 REG,LH
Overall dim. mm
(L*W*H) 1898*628*722 2291*638*648 2175*781*660
Model No. SL225 SL450 SL645
Max. static load (KN) 2250 4500 6750
Max. speed r/min 300 300 300
Max. working pressure
Mpa(psi) 35(5005) 35(5000) 52(7500)
Dia. Of stem mm(in) 76(2.99) 75(3) 102(4)
Coupling
thread
To stem
API 6 5/8 REG,LH 7 5/8” REG,LH 8 5/8 REG,LH
To
kelly API 6 5/8REG,LH 6 5/8” REG,LH 6 5/8 REG,LH
Overall dim. mm
(L*W*H) 2740*1010*860 3015*1096*860 3775*1240*1406
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
21
Rotary table
Feature
In accordance with the standard of API 7K .
The rotary table adopts arc gear and bevel gear to have feature of powerfully bearing , balanced moving and long
life .
The house of the rotary table has cast-welding structure with good rigidity and high accuracy .
The gears and bearings have splash grease with reliable lubrication .
The input axle is a core structure convenient for maintenance and service .
The technology parameter:
Model No. ZP175 ZP205
Open dia. mm(in) 444.5(17 1/2) 520.7(20 1/2)
Max. static load (kN) 2700 3150
Max. working torque N.m 13729 22555
Distance between rotary table and
chain wheel interal gear axle
mm(in)
1118(44) 1353(53 1/4)
Gear ratio 3.75 3.22
Max. speed r/min 300 300
Input axle centre hight mm 260.4 318
Overall dim. mm(L*W*H) 1972*1372*566 2266*1475*704
Net weight Kg 4172 5662
Model No. ZP275 ZP375
Open dia. mm(in) 698.5(27 1/2) 952.5(37 1/2)
Max. static load (kN) 4500 5850
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
22
Max. working torque N.m 27459 32362
Distance between rotary table and
chain wheel interal gear axle
mm(in)
1353(53 1/4) 1353(53 1/4)
Gear ratio 3.67 3.56
Max. speed r/min 300 300
Input axle centre hight mm 330 330
Overall dim. mm(L*W*H) 2392*1670*685 2468*1810*718
Net weight Kg 6122 7970
Mechanically driven drawworks
The technology parameter
Drawworks JC-40/E1000 JC-50/E1500 JC-70/E2000
Rated input power
KW 735 1100 1470
HP 1000 1500 2000
Max. pull of
fastline KN 275 340 485
Dia. Of wireline mm 32 35 38
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
23
in 1-1/4 1-3/8 1-1/2
Drum
diameter*length
Mm 640*1139 685*1245 770*1439
in 25*45 27*49 30*57
Drawworks shifts 4 forward +
2reverse
4 forward +
2reverse
4 forward +
2reverse
Main brake Disc brake
Auxiliary brake Eddy current brake / E.T.N brake
The max. lifting
hook load
KN 2250 3150 4500
KIPS 500 700 1000
3 NB series mud pump
Basic parameters of 3NB series mud pump :
Model 3NB500C 3NB1000C 3NB1300C 3NB1600/LN1600H
Power KW
(PS) 368(500) 735(1000) 956(1300) 956(1300)
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
24
Strokes
per minute
pm
95 110 120 120
Stroke mm 254 305 305 305
Gear ratio 3.82 3.833 3.81 3.81 3.89
Speed of
driving
shaft r/min
363 423 457 457 467
Max.
working
pressure
Mpa
30 35 35 35 51.7
Max. dia.
Of liner
mm
160 170 180 190
Dia. Of
suction
pipe mm
254 305 305 305
Dia. Of
discharge
pipe mm
100 100 100 100
Overall
dim. mm
(L*W*H)
4220×2640×2430 5170×2809×25305010×1942×19184450×2850×20775000×2850×2090
Weight kg 15940 21450 23000 29700 28345
F Series Mud Pump
Dongying Xunbo Internet Technology CO.,Ltd
Website: www.xunbomall.com Add: Dongying City, Shandong Province, China Tel: +86-546-8630115 Email: [email protected]
25
Design Features :
Power End :
The frame is of welded-steel pale construction , with characteristics of high strength , good rigidity and light weight
due to internal stress eliminating treatment after being welded .
Integral herringbone gear drive is adopted for smooth running , high efficiency and long operating life . The crank
shaft is alloy steel castings .
Double-deck sealing is adopted in intermediate pull rod with sound sealing effect .
The power end adopts the lubricating method of forced lubrication combined with splash lubrication .
Fluid end :
The hydraulic cylinder material is alloy steel forging . Straightway hydraulic cylinder has good suction performance .
Suction valve and discharge valve on F series pump are interchangeable .
Pump F-500 uses API 5# valve ; pump F-800 and F-1000 use API 6# valve ; pump F-1600 uses API 7# valve.
Parameters
Model F-500 F-800 F-1000 F-1300 F-1600
Power kw(ps) 373(500) 597(800) 746(1000) 969(1300) 1193(1600)
Strokes per minutes pm 165 150 140 120 120
Stroke mm 190.5(7.5″) 229 (9″) 254 (10″) 305 (12″) 305 (12″)
Gear ratio 4.286:1 4.185:1 4.207:1 4.206:1 4.206:1
Max.working
pressure Mpa 34.5 34.5 34.5 34.5 34.5
Max.Dia.of liner mm 170 170 170 180 180
Dia. Of suction pipe mm 203 254 305 305 305
Dia. Of discharge pipe in 4 5-1/8 5-1/8 5 5
Weight kg 9543 14000 18642 24572 24791