Fanuc options parameter speadsheetREVISION 3

BEST RESOLUTION=1280 x 1024

TO GO DIRECTLY TO A PAGE CLICK ON A LINK BELOW

CNC MASTERS

FANUC OPTION PARAMETER PASSWORDS

FANUC 0-M OPTION PARAMETERS

FANUC 0-T OPTION PARAMETERS

FANUC 6-M OPTION PARAMETERS

FANUC 6-T OPTIONS PARAMETERS

FANUC 10/11/12/15-M OPTION PARAMETERS

FANUC 10-T OPTION PARAMETERS

FANUC 16 / 18 / 21-M OPTION PARAMETERS

FANUC 16 / 18 / 21-T OPTION PARAMETERS

CRACKED SOFTWARE AVAILABLE

KUEI

Fanuc options parameter speadsheetREVISION 3

BEST RESOLUTION=1280 x 1024

TO GO DIRECTLY TO A PAGE CLICK ON A LINK BELOW

CNC MASTERS

INSTRUCTIONS

FANUC OPTION PARAMETER PASSWORDS

FANUC 0-M OPTION PARAMETERS

FANUC 0-T OPTION PARAMETERS

FANUC 6-M OPTION PARAMETERS

FANUC 6-T OPTIONS PARAMETERS

FANUC 10/11/12/15-M OPTION PARAMETERS

FANUC 10-T OPTION PARAMETERS

FANUC 16 / 18 / 21-M OPTION PARAMETERS

FANUC 16 / 18 / 21-T OPTION PARAMETERS

CRACKED SOFTWARE AVAILABLE

KUEI

Fanuc options parameter speadsheetREVISION 3

BEST RESOLUTION=1280 x 1024

TO GO DIRECTLY TO A PAGE CLICK ON A LINK BELOW

INSTRUCTIONSTHIS SPREADSHEET IS A COLLECTION OF THE FANUC SPECIAL OPTIONS PARAMETERS WHICH HAVE BEEN GIVEN TO

ME BY NUMOROUS INDIVIDUALS WHO HAVE BEEN KIND ENOUGH TO AID ME IN THE CREATION OF THIS TOOL.MUCH THANKS TO ALL WHO HELPED!

BEFORE CHANGING ANY OF YOUR PARAMETERS BACKUP ALL PROGRAMS, OFFSETS AND ORIGINAL PARAMETERS.IF YOU DO NOT KNOW HOW TO DO THIS, FIGURE IT OUT BEFORE YOU CONTINUE!!!!

THESE ARE OPTION PARAMETERS. THEY ARE NOT MAGIC PARAMETERS. FOR EXAMPLE, IF YOU TURN ON THE PARAMETER FOR 2 SPINDLES ON A LATHE THE 2ND SPINDLE WILL NOT MAGICALLY APPEAR OUT OF NOWHERE. DUH. DON'T ASK.

MOST OF THE PARAMETERS IN THIS SPREADSHEET I HAVE NO WAY OF VERIFYING; THEREFORE, USE WITH CAUTION.IF YOU KNOW OF AN ERROR OR WISH TO ADD PARAMETERS TO THE NEXT UPDATE, PLEASE EMAIL ME AND THE

SPREADSHEET WILL BE UPDATED AND RERELEASED.

IF I HAVE USED A PARAMETER IN THIS SPREADSHEET IT HAS BEEN MARKED WITH AN * (ASTERISK) IN THE NOTE CATEGORY NEXT TO THE PARAMETER BIT MEANING IT HAS BEEN VERIFIED.

IF A CELL (BOX) CONTAINS A SMALL RED TRIANGLE IN THE UPPER RIGHT TRIANGLE IT MEANS THERE IS A SPECIAL NOTE ATTACHED.BY PASSING YOUR MOUSE BUTTON OVER THIS CELL THE NOTE WILL POPUP FOR VIEWING.

A LOT OF THE PARAMETERS IN THIS SPREADSHEET HAVE VERY VAGUE DEFINITIONS. IF YOU KNOW THE SPECIFICS ON THESE PARAMETERSFEEL FREE TO EMAIL ME SO I CAN INCLUDE BETTER NOTES IN THE FUTURE RELEASES.

THERE ARE MANY BLANK CELLS IN THIS PARAMETER SPREADSHEET DUE TO THE FACT THAT I DO NOT HAVE ALL OF THE PARAMETERS.IF YOU KNOW OF MORE OPTION PARAMETERS PLEASE EMAIL THEM TO ME FOR THE NEXT UPDATE.

WHEN IT COMES TO INFORMATION I BELIEVE IN SHARING THE WEALTH. HOPEFULLY YOU BELIEVE IN THIS CONCEPT AS WELL.

IF YOU ARE SOMEONE WHO WISHES TO BITCH ABOUT THIS INFORMATION BEING GIVEN TO EVERYONE FOR FREE

CLICK HEREOTHERWISE CLICK HERE TO GO BACK TO THE MAIN PAGE

INSTRUCTIONSTHIS SPREADSHEET IS A COLLECTION OF THE FANUC SPECIAL OPTIONS PARAMETERS WHICH HAVE BEEN GIVEN TO

ME BY NUMOROUS INDIVIDUALS WHO HAVE BEEN KIND ENOUGH TO AID ME IN THE CREATION OF THIS TOOL.MUCH THANKS TO ALL WHO HELPED!

BEFORE CHANGING ANY OF YOUR PARAMETERS BACKUP ALL PROGRAMS, OFFSETS AND ORIGINAL PARAMETERS.IF YOU DO NOT KNOW HOW TO DO THIS, FIGURE IT OUT BEFORE YOU CONTINUE!!!!

THESE ARE OPTION PARAMETERS. THEY ARE NOT MAGIC PARAMETERS. FOR EXAMPLE, IF YOU TURN ON THE PARAMETER FOR 2 SPINDLES ON A LATHE THE 2ND SPINDLE WILL NOT MAGICALLY APPEAR OUT OF NOWHERE. DUH. DON'T ASK.

MOST OF THE PARAMETERS IN THIS SPREADSHEET I HAVE NO WAY OF VERIFYING; THEREFORE, USE WITH CAUTION.IF YOU KNOW OF AN ERROR OR WISH TO ADD PARAMETERS TO THE NEXT UPDATE, PLEASE EMAIL ME AND THE

SPREADSHEET WILL BE UPDATED AND RERELEASED.

IF I HAVE USED A PARAMETER IN THIS SPREADSHEET IT HAS BEEN MARKED WITH AN * (ASTERISK) IN THE NOTE CATEGORY NEXT TO THE PARAMETER BIT MEANING IT HAS BEEN VERIFIED.

IF A CELL (BOX) CONTAINS A SMALL RED TRIANGLE IN THE UPPER RIGHT TRIANGLE IT MEANS THERE IS A SPECIAL NOTE ATTACHED.BY PASSING YOUR MOUSE BUTTON OVER THIS CELL THE NOTE WILL POPUP FOR VIEWING.

A LOT OF THE PARAMETERS IN THIS SPREADSHEET HAVE VERY VAGUE DEFINITIONS. IF YOU KNOW THE SPECIFICS ON THESE PARAMETERSFEEL FREE TO EMAIL ME SO I CAN INCLUDE BETTER NOTES IN THE FUTURE RELEASES.

THERE ARE MANY BLANK CELLS IN THIS PARAMETER SPREADSHEET DUE TO THE FACT THAT I DO NOT HAVE ALL OF THE PARAMETERS.IF YOU KNOW OF MORE OPTION PARAMETERS PLEASE EMAIL THEM TO ME FOR THE NEXT UPDATE.

WHEN IT COMES TO INFORMATION I BELIEVE IN SHARING THE WEALTH. HOPEFULLY YOU BELIEVE IN THIS CONCEPT AS WELL.

IF YOU ARE SOMEONE WHO WISHES TO BITCH ABOUT THIS INFORMATION BEING GIVEN TO EVERYONE FOR FREE

CLICK HEREOTHERWISE CLICK HERE TO GO BACK TO THE MAIN PAGE

INSTRUCTIONSTHIS SPREADSHEET IS A COLLECTION OF THE FANUC SPECIAL OPTIONS PARAMETERS WHICH HAVE BEEN GIVEN TO

ME BY NUMOROUS INDIVIDUALS WHO HAVE BEEN KIND ENOUGH TO AID ME IN THE CREATION OF THIS TOOL.MUCH THANKS TO ALL WHO HELPED!

BEFORE CHANGING ANY OF YOUR PARAMETERS BACKUP ALL PROGRAMS, OFFSETS AND ORIGINAL PARAMETERS.IF YOU DO NOT KNOW HOW TO DO THIS, FIGURE IT OUT BEFORE YOU CONTINUE!!!!

THESE ARE OPTION PARAMETERS. THEY ARE NOT MAGIC PARAMETERS. FOR EXAMPLE, IF YOU TURN ON THE PARAMETER FOR 2 SPINDLES ON A LATHE THE 2ND SPINDLE WILL NOT MAGICALLY APPEAR OUT OF NOWHERE. DUH. DON'T ASK.

MOST OF THE PARAMETERS IN THIS SPREADSHEET I HAVE NO WAY OF VERIFYING; THEREFORE, USE WITH CAUTION.IF YOU KNOW OF AN ERROR OR WISH TO ADD PARAMETERS TO THE NEXT UPDATE, PLEASE EMAIL ME AND THE

SPREADSHEET WILL BE UPDATED AND RERELEASED.

IF I HAVE USED A PARAMETER IN THIS SPREADSHEET IT HAS BEEN MARKED WITH AN * (ASTERISK) IN THE NOTE CATEGORY NEXT TO THE PARAMETER BIT MEANING IT HAS BEEN VERIFIED.

IF A CELL (BOX) CONTAINS A SMALL RED TRIANGLE IN THE UPPER RIGHT TRIANGLE IT MEANS THERE IS A SPECIAL NOTE ATTACHED.BY PASSING YOUR MOUSE BUTTON OVER THIS CELL THE NOTE WILL POPUP FOR VIEWING.

A LOT OF THE PARAMETERS IN THIS SPREADSHEET HAVE VERY VAGUE DEFINITIONS. IF YOU KNOW THE SPECIFICS ON THESE PARAMETERSFEEL FREE TO EMAIL ME SO I CAN INCLUDE BETTER NOTES IN THE FUTURE RELEASES.

THERE ARE MANY BLANK CELLS IN THIS PARAMETER SPREADSHEET DUE TO THE FACT THAT I DO NOT HAVE ALL OF THE PARAMETERS.IF YOU KNOW OF MORE OPTION PARAMETERS PLEASE EMAIL THEM TO ME FOR THE NEXT UPDATE.

WHEN IT COMES TO INFORMATION I BELIEVE IN SHARING THE WEALTH. HOPEFULLY YOU BELIEVE IN THIS CONCEPT AS WELL.

IF YOU ARE SOMEONE WHO WISHES TO BITCH ABOUT THIS INFORMATION BEING GIVEN TO EVERYONE FOR FREE

Fanuc Option Parameters PasswordsCONTROL PASSWORD DESCRIPTION

15 T/M 236786253726469919261161

16/18/21i M/T 161820211972070122360679

CLICK HERE TO GO BACK TO MAIN PAGE

HOLD DOWN THE "." AND THE "-" BUTTONS AT STARTUP. AT THE IPL SCREEN

TYPE 99 AND INPUT. ANSWER THE "?" WITH THE FIRST PASSWORD THEN THE

NEXT "?" WITH THE SECOND PASSWORD AND THE 3RD "?" WITH THE LAST

PASSWORD PRESSING INPUT AFTER EACH ENTRY. ANSWER "# OF AXIS" WITH

THE NUMBER OF AXIS OF THE MACHINE. OPTIONS WILL BE IN HEXADECIMAL.

Fanuc Option Parameters PasswordsDESCRIPTION

CLICK HERE TO GO BACK TO MAIN PAGE

HOLD DOWN THE "." AND THE "-" BUTTONS AT STARTUP. AT THE IPL SCREEN

TYPE 99 AND INPUT. ANSWER THE "?" WITH THE FIRST PASSWORD THEN THE

NEXT "?" WITH THE SECOND PASSWORD AND THE 3RD "?" WITH THE LAST

PASSWORD PRESSING INPUT AFTER EACH ENTRY. ANSWER "# OF AXIS" WITH

THE NUMBER OF AXIS OF THE MACHINE. OPTIONS WILL BE IN HEXADECIMAL.

Fanuc 0-M Option ParametersPARAMETER NOTE BIT 76543210

900 * 0 00000001* 1 00000010

2 000001003 000010004 000100005 001000006 010000007 10000000

901 0 00000001* 1 00000010

2 000001003 000010004 00010000

* 5 001000006 01000000

* 7 10000000

902 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

903 0 000000011 00000010

* 2 000001003 00001000

* 4 00010000* 5 00100000

6 01000000* 7 10000000

CLICK HERE TO GO BACK TO MAIN PAGE

904 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

905 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

906 0 000000011 000000102 000001003 00001000

* 4 000100005 001000006 010000007 10000000

907 0 000000011 000000102 000001003 00001000

* 4 000100005 00100000

* 6 010000007 10000000

908 0 000000011 000000102 00000100

3 000010004 000100005 001000006 010000007 10000000

909 0 000000011 000000102 000001003 000010004 000100005 001000006 01000000

* 7 10000000

910 * 0 000000011 00000010

* 2 00000100* 3 00001000* 4 00010000

5 00100000* 6 01000000* 7 10000000

911 * 0 000000011 00000010

* 2 00000100* 3 00001000

4 00010000* 5 00100000

6 010000007 10000000

912 * 0 000000011 00000010

* 2 000001003 00001000

* 4 00010000* 5 00100000

6 01000000

? 7 10000000

913 0 00000001* 1 00000010

2 000001003 000010004 000100005 001000006 01000000

* 7 10000000

914 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

915 0 000000011 000000102 000001003 000010004 000100005 001000006 01000000

* 7 10000000

916 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

917 0 000000011 00000010

2 000001003 00001000

* 4 000100005 001000006 010000007 10000000

918 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

919 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

920 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

921 0 000000011 000000102 000001003 000010004 000100005 00100000

6 010000007 10000000

922 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

923 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

Fanuc 0-M Option ParametersDESCRIPTIONCANNED CYCLE G10 PROGRAM INPUT OF OFFSET MECHANICAL HANDLE FEED MANUAL ONE PULSE GENERATOR CONTROL S4/S5 DIGIT CONTROL INCH / METRIC CONVERSION SPECIAL G CODE

TAPE MEMMORY ADDITION 320MTAPE MEMMORY ADDITION 120MTAPE MEMMORY ADDITION 80MTAPE MEMMORY ADDITION 40MTAPE MEMMORY ADDITION 20MCHAMFERRING, CORNER RADIUS READER/PUNCHER INTERFACE CONTROL MUTIPLE REPETITVE CANNED CYCLE

TWO MANUAL PULSE GENERATOR CONTROL

CONSTANT SURFACE SPEED CONTROL SPINDLE SPEED FLUCTUATION DETECTION PATTERN DATA INPUT STORED PITCH ERROR COMPENSATION CUSTOM MACRO A PLAYBACK

MIRROR IMAGE FOR DOUBLE TURRETS X AXIS MIRROR IMAGE ACTUAL SPINDLE SPEED OUTPUT DIRECT INPUT OF OFFSET B MDI EXEC. B NUMBER OF PROGRAMS 125 EXTERNAL KEY INPUT SOFT KEYS BELOW CRT

CLICK HERE TO GO BACK TO MAIN PAGE

JAPANESE GERMAN/FRENCH MESSAGE CHINESE ITALIAN SPANISH HANGEUI

PMC MODEL L PMC MODEL M 3000 STEP PMC MODEL M 5000 STEP PMC MODEL M 8000 STEP PMC MODEL M 12000 STEP

MENU PROGRAMMING

ADDITIONAL OFFSET MEMORY 64 ADDITIONAL OFFSET MEMORY 99 TOOL LENGTH MEASUREMENT

EXTERNAL TOOL COMPENSATION

2ND AUXILIARY FUNCTION B8-DIGIT BINARY SIMULTANEOUS 3 AXIS CONTROLADDITIONAL AXIS CONTROL HOUR RUN/PARTS COUNT DISPLAY

CUTTER COMPENSATION C G41/G42CUTTER COMPENSATION B

HANDLE INTERRUPTION

JOG OVERRIDE

GENERAL PURPOSE SOFTWARE OPERATOR'S PANEL

SOFTWARE OPERATOR'S PANEL

GRAPHICS DISPLAY CONVERSATIONAL TYPE PROGRAMMING WITH FIGURE

STROKE LIMIT EXTERNAL SETTING

EXTERNAL MESSAGE SIMPLE TOOL LIFE MANAGE

PGM RESTART WORK OFFSETS G54-G59 OPER. MESSAGE HELICAL INT. F1 DIGIT FEED AXIS CONTROL BY PMC AUTO. CORNER OVERRIDE THREAD CUTTING AND SYNCHRONOUS FEED

SINGLE DIRECTION POSITIONING

RIGID TAP CLOCK AND COUNTERSCHANGES XYZ TO @ 400 OFFSETS DIRECTION DISPLAY OF FLOPPY CASSETTE DECIMAL POINT DISPLAY

3RD / 4TH REFERENCE POINT RETURN G50,G51 SCALING G68 COOR-SYS-ROTATE F10/11 TAPE FORMAT TOOL LIFE MANAGEMENT 200 OFFSETS ADDITIONAL OPTIONAL BLOCK SKIP 9

MACRO EXECUTER OR AUX / GRAPH DISPLAY

G15,G16 POLAR COORDINATE SYSTEM

I/O DEVICE EXTERNAL CONTROL SIMULTANEOUS 4 AXIS CONTROL

USER MACRO B

REMOTE BUFFER STORAGE HIGH SPEED REMOTE BUFFER STORAGE A HIGH SPEED REMOTE BUFFER STORAGE BREADER PUNCHER INTERFACE CONTROL 2

5 AXIS CONTROL

200 REGISTERABLE PROGRAMS

TOOL OFFSET G45-G48

GRAPHIC B

ADDITIONAL MACRO VARIABLES 149-199, 531-999

48 WORK OFFSETS

Fanuc 0-T Option ParametersPARAMETER NOTE BIT 76543210

900 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

901 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

902 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

903 0 00000001? 1 00000010

2 000001003 000010004 000100005 001000006 010000007 10000000

CLICK HERE TO GO BACK TO MAIN PAGE

904 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

905 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

906 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

907 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

908 0 000000011 000000102 00000100

3 000010004 000100005 001000006 010000007 10000000

909 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

910 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

911 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

912 0 000000011 000000102 000001003 000010004 000100005 001000006 01000000

7 10000000

913 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

914 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

915 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

916 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

917 0 000000011 00000010

2 000001003 000010004 000100005 001000006 010000007 10000000

918 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

919 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

921 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

922 0 000000011 000000102 000001003 000010004 000100005 00100000

6 010000007 10000000

923 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

Fanuc 0-T Option ParametersDESCRIPTION

G10 PARAMETER / OFFSET WRITINGMECHANICAL HAND FEEDMECHANICAL HAND FEED 1STS4/S5 DIGIT CONTROLINCH/METRIC CONVERSIONSPECIAL G-CODE

memory 120mmemory 80mmemory 40mmemory 20mAUTO CHAMFER / ROUNDINGREADER / PUNCH INTERFACE 1canned threading g76

G96 CONSTANT SURFACE SPEEDSPINDLE SPEED FLUCTUATION DETECTION

STORED PITCH ERROR COMPENSATIONMACRO APLAYBACK

X-AXIS MIRROR IMAGEDOUBLE TURRET MIRROR/Cs AXIS CONTROLACTUAL SPINDLE SPEED OUTPUTDIRECT INPUT OF OFFSET AMOUNT BMDI OPERATION B125 PROGRAM INPUTEXTERNAL KEY INPUTBACKGROUND EDITING

CLICK HERE TO GO BACK TO MAIN PAGE

JAPANESEFRENCH / GERMANCHINESEITALIANKOREANSPANISH

PMC MODEL L FUNCTION 3000 STEPSPMC MODEL M FUNCTION 3000 STEPSPMC MODEL M FUNCTION 5000 STEPSPMC MODEL M FUNCTION 8000 STEPSPMC MODEL M FUNCTION 12000 STEPSPMC MODEL L FUNCTION 5000 STEPS

MENU PROGRAMMING

64 TOOL OFFSETS

TOOL GEOMETERY AND WEAR OFFSETAUTOMATIC TOOL OFFSETEXTERNAL TOOL OFFSET

2ND AUX. FUNCTION (B3/6 DIGIT)SIMULTANEOUS 3 AXIS CONTROL (HELICAL)DIRECT DRAWING DIMENSION INPUTRUN TIME AND PARTS COUNT DISPLAY

G41/G42 CUTTER COMP C

MANUAL HANDLE INTERRUPT

POSITION SIGNAL OUTPUTSOFTWARE GENERAL PURPOSE SWITCH

SOFTWARE OPERATOR PANEL

GRAPHIC DISPLAYCONVERSTION PROGRAMMING W/ GRAPHIC

G80-G85 CANNED CYCLES

EXTERNAL MESSAGE INPUT

PROGRAM RESTART

EXTERNAL DATA INPUTVARIABLE LEAD THREADING

PMC AXIS CONTROLY-AXIS CONTROLCf AXIS CONTROL

CLOCK AND COUNTERS

Y AXIS OFFSETDISPLAY FLOPPY DIRECTORYSETTING UNIT 1/10

G30 P? 3RD/4TH REFERENCE POINT G51 SCALINGF10/11 TAPE FORMATTOOL LIFE MANAGEMENTTOOL MANAGEMENT

ADDITIONAL BLOCK SKIP

MACRO EXECUTER

F1 DIGIT FEEDEXTERNAL I/O DEVICE CONTROLSIMULTANEOUS 4 AXIS CONTROLINTERUPTION TYPE CUSTOM MACROMACRO B

REMOTE BUFFER INTERFACEHIGH SPEED REMOTE BUFFER AHIGH SPEED REMOTE BUFFER BREADER/PUNCHER INTERFACE 2

LINEAR ACC/DCEL AFTER INTERPOLATION4TH AXIS INTERFACE (16BIT OR 32BIT)

HIGH SPEED CYCLE MACHININGPOLYGON TURNINGEXTERNAL MACHINE ZERO POINT SHIFT14" CRT

200 PROGRAMS

SIMPLE SYNCRONUS CONTROLHIGH SPEED SKIP SIGNAL INPUT

TWIN DRIVE FLOPPYEXTENDED EDIT COPY/PASTE

CYLINDRICAL INTERPOLATIONSERIAL SPINDLE

G16 POLAR COORDINATE PROGRAMMINGCs CONTOURING CONTROL

GEFANUC MMC

NC FORMAT OUTPUT FUNCTIONCONVERSATIONAL C AXIS PROGRAMMING

CONVERSATIONAL MACRO EXECUTER

TYPE 2 CANNED CYCLES

Fanuc 6-M Option ParametersPARAMETER NOTE BIT 76543210

0 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

1 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

2 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

3 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

4 0 000000011 00000010

CLICK HERE TO GO BACK TO MAIN PAGE

2 000001003 000010004 000100005 001000006 010000007 10000000

300 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

301 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

302 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

303 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

304 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

Fanuc 6-M Option ParametersDESCRIPTIONCIRCULAR INTERPOLATIONCIRCULAR INTERPOLATION WITH R16 ADDITIONAL OFFSETSS4/S5 DIGIT S CODE, 12 BIT OUTS4/S5 DIGIT S CODE, ANALOG OUT INCH / METRIC CONVERSION ZERO RETURN BZERO RETURN A

5TH AXIS SYMMETRY4TH AXIS SYMMETRY3TH AXIS SYMMETRYCUTTER RADIUS COMPENSATION CCUTTER RADIUS COMPENSATION B2/4 DIGIT S CODEPULSE GENERATOR2/4 DIGIT T CODE

EXP ACCEL/DECELSTORED STROKE LIMIT 2 (SOFT LIMIT 2)F1 FEEDRATESTORED STROKE LIMIT 1

TAPE PUNCH INTERFACEINCREMENT OFFSET INPUT

COMPARISION OF PROGRAMS (TAPE MEMORY COMPARE) TAPE INPUT OFFSET VALUEHELICAL MILL (MUST HAVE PUNCH)ISO CODE INPUT (EIA/ISO)WORK COUNTER (HOUR)RAPID TRAVERSE OVERRIDEPITCH ERROR COMPENSATIONPROGRAMABLE CONTROLLER OP.

G43/G44 HEIGHT OFFSETG45-G48

CLICK HERE TO GO BACK TO MAIN PAGE

FIX CYC BFIX CYC A

G51 SCALINGB 3 DIGITPOSITION DISPLAY (POSITION COUNTER)

USER MACRO BRESTART OF PROGRAMSKIP FUNCTIONAUTO COORDINATE SYSTEM SET

WORK COORDINATE SYSTEM SET (G54)

GEAR SELECTED SPINDLE RANGE, ANALOGGEAR SELECTED SPINDLE RANGE, 12 BIT

TOOL MEASUREMENT (AUTO OFFSET INSERT)ADDITIONAL MEMORY A (99)

AUTO ACCEL./DECEL.

5th AXIS

SINE CURVE CHIP 151-152

Fanuc 6-T Option ParametersPARAMETER NOTE BIT 76543210

0 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

1 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

2 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

3 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

4 0 000000011 00000010

CLICK HERE TO GO BACK TO MAIN PAGE

2 000001003 000010004 000100005 001000006 010000007 10000000

300 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

301 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

302 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

303 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

304 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

Fanuc 6-T Option ParametersDESCRIPTIONCIRCULAR INTERPOLATIONCIRCULAR INTERPOLATION WITH R16 ADDITIONAL OFFSETSS4/S5 DIGIT S CODE, 12 BIT OUTS4/S5 DIGIT S CODE, ANALOG OUT INCH / METRIC CONVERSION ZERO RETURN BZERO RETURN A

FIXED CYCLE G90/G91

CHAMFER AND CORNER RADIUSCUTTER RADIUS COMPENSATIONM-FIXED CYCLE (M70, M71, M72)M-FIXED CYCLE (G73, G74, G75)PULSE GENERATOR

STORED STROKE LIMIT 2 (SOFT LIMIT 2)RADIUS PROGRAMMINGSTORED STROKE LIMIT 1

TAPE PUNCH INTERFACEINCREMENT OFFSET INPUTTHREAD 6 DIGIT

COMPARISION OF PROGRAMS (TAPE MEMORY COMPARE) TAPE INPUT OFFSET VALUEMIRROR IMAGE ON XISO CODE INPUT (EIA/ISO)WORK COUNTER (HOUR)RAPID TRAVERSE OVERRIDE

PROGRAMABLE CONTROLLER OP.

CLICK HERE TO GO BACK TO MAIN PAGE

ROBOTPOSITION DISPLAY (POSITION COUNTER)

USER MACRO BUSER MACRO ARESTART OF PROGRAMSKIP FUNCTIONAUTO COORDINATE SYSTEM SET

4th REFERANCE POINT RETURN3rd FERERANCE POINT RETURN

WORK COORDINATE SYSTEM SET (G54)G60 SINGLE DIRECTION POSITIONING

TOOL MEASUREMENT (AUTO OFFSET INSERT)ADDITIONAL MEMORY A (99)

AUTO ACCEL./DECEL.

Fanuc 10/11/12/15M Option ParametersPARAMETER NOTE BIT 76543210

9100 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9101 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9102 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9103 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

CLICK HERE TO GO BACK TO MAIN PAGE

9104 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9105 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9106 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9107 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9108 0 000000011 000000102 00000100

3 000010004 000100005 001000006 010000007 10000000

9109 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9110 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9111 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9112 0 000000011 000000102 000001003 000010004 000100005 001000006 01000000

7 10000000

9113 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9114 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9115 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9116 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9117 0 000000011 00000010

2 000001003 000010004 000100005 001000006 010000007 10000000

9118 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9119 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9120 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9121 0 000000011 000000102 000001003 000010004 000100005 00100000

6 010000007 10000000

9122 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9123 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9124 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9125 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

Fanuc 10/11/12/15M Option ParametersDESCRIPTIONEXPANSION OF SIMULTANEOUS AXIS2ND REFERENCE POINT (G30)HELICAL (G02,G03)SKIP G31MULTI SKIP G31.1 G31.3HIGH SPEED SKIP3RD, 4TH REFERENCE POINT (G30)HELICAL INTERPOLATION B

SINGLE DIRECTION POSITIONINGIMAGINARY COORDINATE OFFSETTHREADINGVARIABLE LEAD THREADRADIUS CUTTINGTHREAD RETRACTFEED TIME TIMERF-1 DIGIT

G10INCH/METRICCANNED CYCLESTOOL POSITION OFFSETRADIUS COMPENSATION BRADIUS COMPENSATION C3 AXIS NOSE RADIUS

CORNER OVERRIDEPOLAR COORDINATEAUTO CORNER CHAMF/RADIUSPROGRAMMABLE MIRROR IMAGEG51 SCALINGCOORDINATE SYSTEM ROTATIONEACH AXIS SCALINGORIENT PCODER

CLICK HERE TO GO BACK TO MAIN PAGE

G-CODE SYSTEM CDOUBLE TURRET MIRROR IMAGEG71DIRECT INPUT FROM DRAWING

SPINDLE SPEED FLUCTUATION DETECTIONIPR JOGZR ERR THREAD

HANDLE INTERUPTMANUAL INTERUPTMPG 1MPG 2 AND 3ANGLE CUTTINGMANUAL NUMBER SETTINGMENU SWITCHESSOFT KEYS

TAPE COMPAREPROGRAM RESTARTBLOCK RESTARTBLOCK SKIP 1-9PLAYBACKCYCLE RUNNING TIMEFS3, FS6 INTERFACEN.C./PC WINDOW A

SPINDLE ANALOG/BINARY OUTPUTG96 CONSTANT SURFACE SPEEDSPINDLE ORIENTATIONSPINDLE SPEED OUTPUTT-CODE 8 DIGITTOOL LIFE2ND AUX FUNCTIONAXIS MOVING SIGNAL OUTPUT

EXTERNAL INPUT/OUTPUTEXTERNAL WORK # SEARCHAUTO TOOL LENGTH OFFSET

TOOL LENGTH MEASUREMENTHIGH SPEED TOOL LENGHT MEASUREMENTRS232C ARS232C BRS232C C

EXTERNAL I/O DEVICE CONTROLEXTERNAL POSITION READ OUT999 TOOL OFFSETSOFFSET MEMORY BOFFSET MEMORY C99 TOOL OFFSETS200 TOOL OFFSETS499 TOOL OFFSETS

100 PROGRAMS200 PROGRAMS400 PROGRAMSPPS 132FTPPS262/200FTGRAPHIC BSEMI-CONVERSATIONAL GRAPHICSCONVERSATIONAL GRAPHICS

MACRO BMACRO INTERUPTPRG ENC PASSWORDTAPE EDITING EXPANSIONCOM VARIABLES 200COM VARIABLES 300COM VARIABLES 600

2ND OVERRIDEACC/DEC BFR IPLEXTERNAL DECELERATIONFEED STOP.1u DETECTORWORK ZERO MEASUREEXPAND CUSTOM MACRO

CALL KEY

STORED STROKE 2,3STORED STROKE 1

PITCH ERROR COMPENSATIONANGLE COMPENSATIONSQUARE COMPENSATION

PARALLEL AXES CONTROLDUAL DRV AXS CTRLHIGHBRED CONTROLDUAL FEEDBACK AXIS MONITORBALANCE CUTINTERFERENCE CHECKOSI ETHERNET FUNCTIONINDEX TABLE

PASCAL PRGRM

PART COUNTERKEY IN BY PMCMULT BIFFERHIGH SPD MACHININGTLM TOOL GROUPFANUC TP CNTR.DABSLT POS DETCP.C.B. DRILL

NC/PC WINDOW BSYNC/IND AX CTRL

REW FOR 232C TRGRAPHIC DISPLAY AHIGH SPD REMOTE BUFFERTURRET CONTROLCYLINDRICAL INTERPOLATIONPOLAR INTERPOLATION

CIRCLR THRED BARBITRARY CMRWORK OFS 48 SETEXPONENTIAL INTERPOLATIONFLOPPY DIRECTORYTRANSFER MACHINEA-AXIS SPINDLE SWITCHC NORMAL CONTROL

GAS/LASERRETRACEAUTO EXACT STOP CHECKTOOL POSITION OFFSET BGRADUAL CURVE CTTORCH ROTATIONACC/DEC OUTPUT

40M PPS/E80M PPS/E160M PPS/E320M PPS/E480M PPS/E640M PPS/E

GEAR HOB

F3000C FORMATF200AB FORMATHIGH SPEED DIRECT BMULTI JOG RETRACTFEEDRATE 10 TIMESCUT TIME CON CHANGE

SPINDLE / SUR SWITCHJIG GRINDER

EXPAND AXIS NAMEEXPAND TOOL LIFE MANAGEMENTMAP INTERFACE

RIGID TAPPINGGRAPHIC COPY3RD COORDINATE PERMUTATIONAPPLICATION SOFTWARE

OVERRIDE PLAYBACKCHECK TAILSTOCK BARRIERTOOL RETRACT RETURNMACHINE TIME STPMEANDER COMPENSATION

POLYGON CUTTINGFLOATING REFERENCE POINT

AXIS PERMUTATIONAUTO CORNER DECELERATIONMPG FEED DIRDELETE SCANZERO OFFSETTRAVESE INHIBITAUTO SPEED LIMIT CIRCIN CUT SIGNAL OUTPUT

INTERFERENCE CHECKSPEC JOG OVERRIDETOOL LENGTH OFFSET VECTORPARAMETER CHANGE BY PROGRAMGM FLOPPY FORMATLN ACCEL/DECEL FOR CONT

OFS MSUR INPUT B

Fanuc 10T Option ParametersPARAMETER NOTE BIT 76543210

9100 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9101 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9102 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9103 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

CLICK HERE TO GO BACK TO MAIN PAGE

9104 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9105 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9106 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9107 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9108 0 000000011 000000102 00000100

3 000010004 000100005 001000006 010000007 10000000

9109 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9110 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9111 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9112 0 000000011 000000102 000001003 000010004 000100005 001000006 01000000

7 10000000

9113 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9114 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9115 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9116 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9117 0 000000011 00000010

2 000001003 000010004 000100005 001000006 010000007 10000000

9118 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9119 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9120 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9121 0 000000011 000000102 000001003 000010004 000100005 00100000

6 010000007 10000000

9122 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9123 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9124 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

Fanuc 10T Option ParametersDESCRIPTION

SKIPMULTI SKIPHIGH SPEED SKIP

G10INCH/METRIC

TOOLNOSE COMPBDC

AUTO CORNER CHAMF/RADIUS

CLICK HERE TO GO BACK TO MAIN PAGE

G-CODE SYSTEM CDOUBLE TURRET MIRROR IMAGEG76 MULTIPLE REPETITIVE CANNED CYCLES

PROGRAM JOGMENU SWITCHES

PROGRAM RESTARTBLOCK RESTARTBLOCK SKIP 1-9

G96 CONSTANT SURFACE SPEED

TOOL LIFE

TOOL GEOMETRY/WEAR OFFSET MEMORY B

64 TOOL OFFSETS

ADD 40M MEMORYADD 80M MEMORY

MACRO B

EXT DECEL

EXPAND CUSTOM MACRO

Fanuc 16/18/21-M Option ParametersPARAMETER NOTE BIT 76543210

9920 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9921 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9922 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9923 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

CLICK HERE TO GO BACK TO MAIN PAGE

9924 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9925 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9926 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9927 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9928 0 000000011 000000102 00000100

3 000010004 000100005 001000006 010000007 10000000

9929 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9930 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9931 0 000000011 000000102 000001003 000010004 000100005 001000006 01000000

? 7 10000000

9932 0 000000011 000000102 000001003 000010004 000100005 001000006 01000000

7 10000000

9933 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9934 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9935 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9936 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9937 0 000000011 00000010

2 000001003 000010004 000100005 001000006 010000007 10000000

9938 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9939 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9940 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9941 0 000000011 000000102 000001003 000010004 000100005 00100000

6 010000007 10000000

9942 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9943 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9944 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9945 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9946 0 00000001

1 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9952 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9962 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9972 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

Fanuc 16/18/21-M Option ParametersDESCRIPTIONG73-G76 CANNED CYCLESG10 PARAMETER, OFFSET OVERRIDEMECHANICL HANDLE FEEDONE MANUAL PULSE GENERATOR CONTROLANALOG SPINDLE CONTROLINCH / METRIC CONVERSIONSPECIAL G-CODE

TAPE MEM ADDITION 640MTAPE MEM ADDITION 320MTAPE MEM ADDITION 160MTAPE MEM ADDITION 80MTAPE MEM ADDITION 40MCHAMFERING, CORNER RADIUSREADER/PUNCHER INTERFACE CONTROLATC CYCLE

2/3 MANUAL PULSE GENERATOR CONTROL

CONSTANT SURFACE SPEED CONTROLSPINDLE SPEED FLUCTUATION DETECTIONPATTERN DATA INPUTSTORED PITCH ERROR COMPENSATIONMACRO APLAYBACK

X AXIS MIRROR IMAGEACTUAL SPINDLE SPEED OUTPUTTOOL PRESETTER OPTION/DIRECT INPUT OF OFFSET B

NUMBER OF PROGRAMS 125EXTERNAL KEY INPUTBACK GROUND EDIT

CLICK HERE TO GO BACK TO MAIN PAGE

JAPANESEGERMAN/FRENCH MESSAGE

ADDITIONAL OFFSET MEMORY 6499 TOOL OFFSETSTOOL LENGTH MEASUREMENT (INPUT C KEY)AUTOMATIC TOOL LENGTH MEASUREMENTEXTERNAL TOOL OFFSET

QUASI-PMC2ND AUXILIARY FUNCTION B8-DIGIT BINAR

ADDITIONAL AXIS CONTROLRUN HOUR AND PARTS COUNTER

CUTTER COMP C (TOOL NOSE RADIUS COMP)CUTTER COMPENSATION B

HANDLE INTERRUPTION

FEED STOP

JOG OVERRIDEPOSITIONAL SIGNAL OUTPUTSOFTWARE OPERATOR'S PANEL GENERAL PURPOSE SOFTWARE OPERATOR'S PANEL

GRAPHICS DISPLAYCONVERSATIONAL TYPE PROGRAMMING WITH FIGEXPANDED STORED STROKE CHECKSTROKE LIMIT EXTERNAL SETTINGTHREADING CYCLE RETRACT

EXTERNAL MESSAGE

PGM RESTARTWORK OFFSETS G54-G59EXTERNAL DATA INPUTHELICAL INTERPOLATIONTHREAD CUTTING AND SYNCHRONOUS FEEDAXIS CONTROL BY PMCAUTO. CORNER OVERRIDEHOBBING FUNCTION/Cf-AXIS CONTROL

G60 SINGLE DIRECTION POSITIONINGATC FOR DRILLMATEM29 RIGID TAPPINGCLOCK FUNCTION

400 OFFSETSDIRECTORY DISPLAY OF FLOPPY CASSETTEINCREMENTAL SYSTEM 1/10

3RD/4TH REFERENCE POINT RETURNG50,G51 SCALINGG68 ANGULAR ROTATIONAL OFFSETF15 TAPE FORMATTOOL LIFE MANAGEMENT200 OFFSETSADDITIONAL OPTIONAL BLOCK SKIP 9

MACRO EXECUTER

SEPARATE HEIGHT AND DIAMETER OFFSETS C- GEOMETRY AND WEARG15,G16 POLAR COORDINATE SYSTEM

F1 DIGIT FEEDI/O DEVICE EXTERNAL CONTROL

INTERRUPTION TYPE MACROMACRO B

REMOTE BUFFER STORAGEHIGH SPEED REMOTE BUFFER STORAGE AHIGH SPEED REMOTE BUFFER STORAGE BREADER PUNCHER INTERFACE CONTROL 2MAP INTERFACELINEAR ACCEL / DECEL AFTER INTERPOLATION

HIGH SPEED MACHININGTOOL OFFSET MEMORY BEXT. MACHINE ZERO POINT SHFT.14"/10" DISPLAYEXTERNAL DECELERATIONDYNAMIC GRAPHIC DISPLAY400 REGISTERABLE PROGRAMS200 REGISTERABLE PROGRAMS

TOOL OFFSET G45-G48

OPTIONAL ANGLE CHAMFER / CORNER ROUNDINGSIMPLE SYNCHRONOUS CONTROLHIGH SPEED SKIP

2 DRIVE FLOPPY CONTROLEXTENDED EDIT COPY / PASTE

CYLINDRICAL INTERPOLATIONSERIAL SPINDLE INTERFACE

POLAR COORDINATE INTERPOLATIONCs - AXIS CONTOUR CONTROLADDITIONAL MACRO VARIABLES 149-199 531-999NORMAL DIRECTION CONTROLTOOL LIFE MANAGE MANAGEMENT 512 PAIRSINPUT/OUTPUT SIMULTANEOUS OPERATION

NC FORMAT CONVERSION

MACRO EXECUTOR FOR CAP

DNC1 CONTROLPROGRAM FILE MATEPOSITION SWITCH4 AXIS SIMULTANEOUS PROGRAMMING

INFEED CONTROLGRINDING CANNED CYCLESPINDLE SYNCHRONOUS CONTROL

1ST SPINDLE ORIENTATION

1ST SPINDLE OUTPUT SWITCH

2ND SPINDLE ORIENTATION

2ND SPINDLE OUTPUT SWITCH

SEQUENCE NUMBER COLLATE & STOPINCLINATION AXIS CONTROLCONTINOUS DRESSING FUNCTIONCONTROLLABLE AXES EXPANSIONSIMULTANEOUS CONTROL AXES EXPANSION1000 REGISTERED PROGRAMSPROGRAM MEMMORY 1200mG54.1 P1-P48 ADDITIONAL WORK OFFSETS

2ND FEEDRATE OVERRIDE

AXIS CONTROL DETACH

PROGRAMMABLE MIRROR IMAGE

G08 P1 / P0 HPCC LOOK AHEAD

INV. TIME FEED G93

PMC-RC

PMC-RC C/PASCAL

BELL SHAPE ACC/DEC IN RAPID

CUTTING RETRACT & RESTART

G05.1 Q1 / Q0 AICC SIMPLE CONTOUR CONTROL

Fanuc 16/18/21-T Option ParametersPARAMETER NOTE BIT 76543210

9920 0 00000001* 1 00000010

2 000001003 000010004 000100005 001000006 010000007 10000000

9921 0 000000011 000000102 000001003 000010004 000100005 001000006 01000000

* 7 10000000

9922 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9923 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

CLICK HERE TO GO BACK TO MAIN PAGE

9924 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9925 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9926 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9927 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9928 0 000000011 000000102 00000100

3 000010004 000100005 001000006 010000007 10000000

9929 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9930 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9931 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9932 0 000000011 000000102 000001003 000010004 000100005 001000006 01000000

7 10000000

9933 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9934 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9935 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9936 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9937 0 000000011 00000010

2 000001003 000010004 000100005 001000006 010000007 10000000

9938 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9939 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9940 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9941 0 000000011 000000102 000001003 000010004 000100005 00100000

6 010000007 10000000

9942 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9943 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9944 0 000000011 000000102 000001003 000010004 000100005 001000006 010000007 10000000

9950

Fanuc 16/18/21-T Option ParametersDESCRIPTION

G10 PARAMETER, OFFSET OVERRIDEMECHANICAL GENERATORHANDWHEEL FEEDANALOG SPINDLE CONTROLINCH/METRIC CONVERSIONSPECIAL G CODE INPUT

HEAD 1 PART PROGRAM STORAGE 640MHEAD 1 PART PROGRAM STORAGE 320MHEAD 1 PART PROGRAM STORAGE 160MHEAD 1 PART PROGRAM STORAGE 60MHEAD 1 PART PROGRAM STORAGE 40MCHAMFERING / CORNER RREADER /PUNCHER INTERFACEG70-G75 CANNED CYCLES

HANDWHEEL FEED 2

CONSTANT SURFACE SPEED CONTROLSPINDLE SPEED FLUCTUATIONPATTERN DATA INPUTPITCH ERROR COMPENSATIONCUSTOM MACRO APLAYBACK

X-AXIS MIRROR IMAGEMIRROR IMAGE DOUBLE TURRETACTUAL SPINDLE SPEED OUTDIRECT INPUT OF OFFSET BMDIREGISTERED PROGRAMS - 125EXTERNAL KEY INPUTBACKGROUND EDIT

CLICK HERE TO GO BACK TO MAIN PAGE

JAPANESE DISPLAYFRENCH / GERMAN DISPLAYCHINESE DISPLAYITALIAN DISPLAYKOREAN DISPLAYSPANISH DISPLAY

PMC-LPMC-M 3000 STEPPMC-M 5000 STEPPMC-M 8000 STEPPMC-M 12000 STEP

MENU PROGRAMMING

TOOL OFFSET MEMORY - 32 PAIRSTOOL OFFSET MEMORY - 64 PAIRSTOOL GEOMETRY / WEAR OFFSETAUTOMATIC TOOL OFFSETEXTERNAL TOOL OFFSET

LIKE PMC2ND AUXILIARY FUNCTIONSIMULTANEOUS 3 AXIS CONTROLDIRECT DRAWING DIMENSIONRUN HOUR AND PARTS COUNT

TOOL NOSE RADIUS COMPENSATION

HANDWHEEL FEED INTERRUPTION

FEED STOP

POSITION SIGNAL OUTPUTSOFTWARE OPERATOR PANEL GENERAL SWITCH

SOFTWARE OPERATORS PANEL

GRAPHIC FUNCTIONCONVERSATIONAL PROGRAM WITH GRAPHICSSTORED STROKE LIMIT 2,3CANNED CYCLES FOR DRILLING

THREAD CUTTING RETRACTEXTERNAL MESSAGESIMPLE TOOL LIFE MANAGEMENT

PROGRAM RESTARTSPINDLE INDEXEXTERNAL DATA INPUTVARIABLE LEAD THREAD CUTTINGCONTINUOUS THREAD CUTTINGAXIS CONTROL BY PMC4'TH AXIS CONTROL BY (Y)3'RD AXIS CONTROL (CF)

MULTI-STEP SKIP FUNCTIONRIGID TAPPINGINCLINATION AXIS CONTROLCLOCKALTERNATIVE AXISY AXIS OFFSETDIRECTORY DISPLAY OF FLOPPYINCREMENTAL SYSTEM 1/10

3RD,4TH REFERENCE POINT

TAPE FORMAT FOR F15TOOL LIFE MANAGEMENT

ADDITIONAL OPITIONAL BLOCK SKIP

MACRO EXECUTER

BALANCED CUTTINGTOOL POST INTERFERENCE CHECK

EXTERNAL I/O DEVICE CONTROLSIMULTANEOUS 4 AXIS CONTROLINTERRUPTION TYPE MACROMACRO B

REMOTE BUFFERHIGH SPEED REMOTE BUFFER A

READER / PUNCHER INTERFACE 2MAP INTERFACELINEAR ACCEL / DECEL AFTER INTERPOLATION4'TH AXIS INTERFACE

POLYGON CUTTINGEXTERNAL MACHINE ZERO POINT SHIFT14" / 10" DISPLAYEXTERNAL DECELERATIONDYNAMIC GRAPHIC DISPLAYREGISTERED PROGRAMS - 400REGISTERED PROGRAMS - 200

POLYGON

G54-G59

EXTENDED EDIT COPY / PASTE

CYLINDRICAL INTERPOLATION

POLAR INTERPOLATION

EXTRA MACRO VARIABLESHELICAL INTERPOLATION

1ST SPINDLE ORIENTATION

1ST SPINDLE OUTPUT SWITCH

2ND SPINDLE ORIENTATION

2ND SPINDLE OUTPUT SWITCH

TYPE II CANNED CYCLES

RIGHT SIDE MEMORY SAME AS 9921

SHUT THE HELL UP CRYBABY THERE IS ONE OF YOU IN EVERY DAMN MACHINE SHOP SO CLICK HERE

CRACKED SOFTWARE

MASTERCAM V8

MASTERCAM V9 SP1

MASTERCAM 9.1-2

CAMAIX ADDON FOR MASTERCAM 9SP1

SURFCAM 2001

SURFCAM 2002 PLUS

GIBBSCAM V6 2002

ARTCAM PRO V5.5

SOLUTIONWARE GEOPATH 3.5

UNIGRAPHICS NX1

CAST TRAINING FOR UNIGRAPHICS NX1

EAGLE EDIT PLOT V4

CIMCO DNCMAX/EDIT 4.3

AUTOCAD 2002 MECH 6

UNIGRAPHICS NX2

ARCHICAD V7.3

MS OFFICE XP DEVELOPER

CLICK HERE TO GO BACK TO MAIN PAGELISTED BELOW ARE THE CRACKED SOFTWARE TITLES I HAVE AVAILABLE. ALL OF THESE TITLES ARE 100% OPERATIONAL

AND ARE COMPLETELY TESTED. IF YOU DO NOT SEE WHAT YOU WANT, ASK AND I MAY BE ABLE TO GET IT FOR YOU.

I will only sell software to people who "claim" they are already registered users and "promise" to abide by all software laws and regulations pertaining to the software they request. If you are unwilling to do this do not ask for software. Each software package is $200. If you buy 2 you get 1 package free. To order software just send the total amount by way of www.paypal.com. If you do not already have a paypal account you will need to set one up. This is the ONLY form of payment I accept. Do not bother asking about others. After sending payment send me an email with shipping instructions and the software titles you select. The cd will be sent to you by priority mail the following business day. The cd will contain everything you need. Thank you.

CRACKED SOFTWARE

SOLID EDGE V12

SOLID WORKS 2003

PRO-E 2002

MASTERCAM V9 POST PROCESSOR TRAINING

FASTCAD V7

MATLAB V6.1

MINITAB V13

CIMATRON V11.1/CIMARENDER V8

VERICUT 5.2

EDGECAM 7.5

ESPRIT 2002

FEATURECAM SOLIDS ADDON

FEATURECAM V10

METACUT 2.1

POINTLINE CAD V18

WINDOWS 2003

INVENTOR 6

CLICK HERE TO GO BACK TO MAIN PAGELISTED BELOW ARE THE CRACKED SOFTWARE TITLES I HAVE AVAILABLE. ALL OF THESE TITLES ARE 100% OPERATIONAL

AND ARE COMPLETELY TESTED. IF YOU DO NOT SEE WHAT YOU WANT, ASK AND I MAY BE ABLE TO GET IT FOR YOU.

I will only sell software to people who "claim" they are already registered users and "promise" to abide by all software laws and regulations pertaining to the software they request. If you are unwilling to do this do not ask for software. Each software package is $200. If you buy 2 you get 1 package free. To order software just send the total amount by way of www.paypal.com. If you do not already have a paypal account you will need to set one up. This is the ONLY form of payment I accept. Do not bother asking about others. After sending payment send me an email with shipping instructions and the software titles you select. The cd will be sent to you by priority mail the following business day. The cd will contain everything you need. Thank you.

METACUT 2.1

POINTLINE CAD V18

c lic k2.dxf