XIX International Symposium PROGRAM

Research – Education - Technology

Scientific Committee:

Prof. Dr.-Ing. Slawomir SMOLEN, Hochschule Bremen - Chairman Prof. Dr.-Ing. habil. Janusz T. CIESLINSKI, Gdansk University of Technology Prof. Dr.-Ing. Wojciech KIELCZYNSKI, Gdansk University of Technology Prof. Dr.-Ing. Jozef NIEGODA, Gdansk University of Technology Prof. Dr.-Ing. Siegfried PAHL, Hochschule Bremen Prof. Dr.-Ing. Rüdiger SCHUBERT, Hochschule Bremen Prof. Dr.-Ing. habil. Jan STASIEK, Gdansk University of Technology Prof. Dr.-Ing. Bernd STECKEMETZ, Hochschule Bremen Prof. Dr.-Ing. Janusz A. SZYMCZYK, Fachhochschule Stralsund Prof. Dr.-Ing. Jürgen WESTHOF, Hochschule Bremen

Organizing Committee:

Prof. Dr.-Ing. Slawomir SMOLEN Prof. Carsten HOLZE Dipl.-Ing. Albrecht EICKE Dipl.-Ing. Andreas KRÜGER Frau Katrin STUKENBERG Frau Sandra CONRAD-JUHLS

Editorial:

Prof. Dr.-Ing. Slawomir SMOLEN

XIX International Symposium PROGRAM

Thursday, 24th of September 2009

08.30 - 09.20 h Arrival and Registration 09.20 - 09.30 h Prof. Dr.-Ing. S. Smolen, University of Applied Sciences,

„J.R.Mayer-Institut für Energietechnik“, Hochschule Bremen Welcome of Guests

09.30 - 09.40 h Prof. Dr.-Ing. U. Apel, Deputy Rector University of Applied Sciences

Opening of the Symposium 09.40 - 11.00 h Presentation – Session 1

Chairmen: Prof. Dr.-Ing. habil. Janusz T. Cieslinski Prof. Dr.-Ing. Siegfried Pahl

09.40 - 10.00 h Jürgen Westhof, Dean of Faculty of Nature and Technology,

University of Applied Sciences Bremen Experience and Impact of the Sorbonne-Bologna Process on

Quality of Engineering in Mechanical Engineering 10.00 - 10.20 h Wojciech Kielczynski, Jozef Niegoda,

Gdansk University of Technology New Fields of Study at the Faculty of Mechanical Engineering

at the Gdansk University of Technology 10.20 - 10.40 h Catherine Couturier, Head of Master Studies,

A. Zaid, J.C. Nicolas Industrial Process & Innovation, University of Artois, France

Intensive Week of Company Management Simulation 10.40 - 10.55 h Ionel Staretu, Florin Garbacia, Cristian Dudulean,

Transylvania University of Brasov The Peculiarities of Using Virtual Reality in the Training Process

Specific to Disciplines of Apllied Mechanics 10.55 - 11.00 h Discussion 11.00 - 11.20 h Coffee – Break

11.20 - 13.00 h Presentation – Session 2

Chairmen: Prof. Dr.-Ing. Bernd Steckemetz Doz. Dr.-Ing. Jozef Niegoda

11.20 - 11.35 h Klaas Meester, Olaf Frommann,

University of Applied Sciences Bremen Analysis of the Centrifugal and Coriolis Effects on the Boundary

Layer of Wind Turbine Rotor Blades 11.35 - 11.40 h Discussion 11.40 - 11.55 h Albert Baars, University of Applied Sciences Bremen Libellen als Vorbilder für Kleinstflugzeuge? – Analyse des

instationären Strömungsfeldes um einen 2D-Libellenflügel im Gleitflug

11.55 - 12.00 h Discussion 12.00 - 12.15 h Olaf Frommann, University of Applied Sciences Bremen Real and Alleged Uncertainties within the Design Process Based

upon Numerical Optimation 12.15 - 12.20 h Discussion 12.20 - 12.35 h Werner Rinck, Albert Plate, University of Applied Sciences Stralsund Some Simple Experiments with Fast Fourier Transformation

(FFT) in Measurement Technic 12.35 - 12.40 h Discussion 12.40 - 12.55 h Tudor Irimias, Romica Muntean, Adrian Pìslá,

Technical University in Cluj Napoca Planning and Recruitment of Human Resources in the

Aerospace Technology 12.55 - 13.00 h Discussion

13.00 - 14.20 h Lunch

14.20 - 15.20 h Presentation – Session 3

Chairmen: Prof. Dr.-Ing. Janusz A. Szymczyk Dr. (PhD) Catherine Couturier

14.20 - 14.35 h Olaf Hasemann, Bernd Steckemetz, Gerd Menken

University of Applied Sciences Bremen MEWAS –

Mechatronical Development Tool for the Design of Spacecrafts 14.35 - 14.40 h Discussion 14.40 - 14.55 h Merlin Barschke, Gerd Menken, Olaf Hasemann

University of Applied Sciences Bremen Development of a Simulation Based Control Unit Design Tool

for MEWAS 14.55 - 15.00 h Discussion 15.00 - 15.15 h Leszek Osiecki, Pawel Sliwinski, Gdansk University of Technology Displacement Control in PWK-Type Pumps 15.15 - 15.20 h Discussion 15.20 - 16.30 h Coffee - Break - Poster Session ‘Kleiner Vortragssaal’

Chairmen: Dr. Wojciech Kielczynski Prof. Dr.-Ing. Rüdiger Schubert

Adam Barylski, Mariusz Deja

Wear of Tool in Double-Disk Lapping of Silicon Wafers

Catherine Couturier, A. Zaid, M. Huchette

Research and Training Relationships, Two Case Studies in Engineers Education

Mehdi Doosttalab, Olaf Frommann

CFD Analysis of Rotating Blade Using Thick Optimized Airfoil

Janusz Iwan Wasserturbinen: Geometrie von Hydraulischen Kanälen und Gebrauchseigenschaften

Jens Jensen Applied Research on Two-Stroke Engines at the University of Applied Sciences Bremen

Krzysztof Lipinski A Strategyof Minimal Torque Modifications in a Question of Actuation Strategy for on Over-Actuated System of a Planar Walking Robot

Siegfried Pahl Unmanned Air Vehicles (UAV) – Entwicklungstendenzen und Entwicklungsarbeiten an der Hochschule Bremen

Bernd Steckemetz, Joachim Beyer

Air Bearing Facility

16.45 - 19.00 h Cruise on the River ' Weser '

19.00 h Dinner Nautische Kameradschaft Tritonia e.V. Leinestrasse 5 / Sankt-Pauli-Deich , 28199 Bremen

XIX International Symposium

PROGRAM

Friday, 25th of September 2009

08.30 - 10.20 h Presentation – Session 4

Chairmen: Prof. Dr.-Ing. Slawomir Smolen Prof. Dr.-Ing. Adrian Pìslá

08.40 - 08.55 h Olga Schilling, Gerhard Schünemann, Tilo Wagner,

University of Applied Sciences Stralsund Effizenz von Regenerativen Energiequellen bei der Wärme- und

Kälteversorgung von Gebäuden 08.55 - 09.00 h Discussion 09.00 - 09.15 h Chahpar Mostofizadeh, Horst Ortgies,

University of Applied Sciences Bremerhaven Anwendung der Wärmepumpe zur Lufterwärmung in einem

Hallenbad unter Bneutzung der Abluft als Wärmequelle 09.15 - 09.20 h Discussion 09.20 - 09.35 h Wolfgang Schulz, Bremer Energie Institut Fernwärme aus Kraft-Wärme-Kopplung und ihr Beitrag zum

Klimaschutz in Berlin 09.35 - 09.40 h Discussion 09.40 - 09.55 h Zbigniew Kneba, Gdansk University of Technology Heat Transferred to Car Engine Cooling System -

Influence of Coolant Flow throw Engine Block 09.55 - 10.00 h Discussion 10.00 - 10.15 h Rolf Peter Strauß, University of Applied Sciences Bremen Hocheffiziente Wärmeübertragung durch

Mikrokanal-Faltwärmeüberträger 10.15 - 10.20 h Discussion 10.20 - 10.40 h Coffee - Break

10.40 - 12.00 h Presentation – Session 5

Chairmen: Prof. Dr.-Ing. Henning Albers Prof. Sreto Boljevic

10.40 - 10.55 h Carsten Holze, Martin Meier, Olaf Frommann,

University of Applied Sciences Bremen Numerical and Experimental Investigation of Innovative

Parabolic Trough Collector Field Configurations 10.55 - 11.00 h Discussion 11.00 - 11.15 h Matthias Ahlhaus, University of Applied Sciences Stralsund Institute for Renewable Energy Systems (IRES)

Actual projects and Possibilities for Cooperation 11.15 - 11.20 h Discussion 11.20 - 11.35 h Ulli Drescher, René Niesner, GMK Organic Rankine Cycle for Waste Heat Recovery

11.35 - 11.40 h Discussion 11.40 - 11.55 h Andreas Brümmer, Jan Hütker, Technical University Dortmund Inlet Throtting Loss and Clearance Flow During the Filling

Process of Screw-Type Engines 11.55 - 12.00 h Discussion 12.00 – 13.00 h Lunch

13.00 – 13.40 h Postersession ‘Kleiner Vortragssaal’

Chairmen: Prof. Carsten Holze Prof. Phd. Eng. Ionel Staretu

Tadeusz Bohdal, Malgorzata Sikora, Henryk Charun, Waldemar Kuczynski

Investigation of Heat Exchange and Flow Resistances During Condensation of Refrigeration Media in Minichannels

Uwe Bochert, Janusz A. Szymczyk, Antonio Delgado

High Temperature Flow Control for Combustion Chamber Test Bench

Janusz T. Cieslinski, Tomasz Kaczmarczyk, Bartosz Dawidowicz, Slawomir Smolen

Dynamic Response of the PEM Fuel Cell to Step Change Load

Janusz T. Cieslinski, Kszysztof Krasowski

Influence of Pressure on Heat Transfer During Pool Boiling on Smooth Tube Bundle

Leszek Dabrowski Temperature Measurements in Monitoring of Large Thrust Bearings

Krzysztof Dutkowski, Tadeusz Bohdal, Malgorzata Sikora

Boiling Curves of Refrigerants in Minichannels

Carsten Holze, Slawomir Smolen

Steam Power Plant with Organic Working Fluid (Organic Rankine Cycle) - Design Development and Installation of a Test- and Demonstration Plant

Thomas Panten, Janusz T. Cieslinski, Janusz A. Szymczyk

Topologie der Strömung und das Geschwindigkeitsfeld während des Blasenaufstiegs und der Koaleszenz

Angela Plesa, Dan Opruta, Paula Ungerusan

Using Numerical Computation Methodfor the Determination of the Plate and Fins Heat Exchangers Convective Coefficient

Slawomir Smolen Theoretical and Practical Investigations of the Heat Transfer in Vertical Heat Exchangers in the Ground

Janusz A. Szymczyk Gasturbinen in der dezentralen Energieversorgung

Zbigniew Zapalowicz, A. Garnysz

Heat Losses between Water in Open Swimming Pool and Ground

13.40 - 15.00 h Presentation – Session 6

Chairmen: Prof. Dr.-Ing. Matthias Ahlhaus Prof. Dr.-Ing. Chahpar Mostofizadeh

13.40 - 13.55 h Sreto Boljevic, Liam Buckley, Institute of Technology Cork Impact of Combined Heat and Power (CHP) Plant in a Dairy

Process Facility on Thermal and Electrical Energy Supply 13.55 - 14.00 h Discussion 14.00 - 14.15 h Heiner J. Katke, W. Beckmann, R. Bierschenk, M. Krebes

University of Applied Sciences Stralsund Hythan-Betrieb von Blockheizkraftwerken 14.15 - 14.20 h Discussion 14.20 - 14.35 h Paula Unguresan, Victor Hodor, Angela Plesa, Florin Bode,

Technical University in Cluj Napoca Exergoeconomic Analysis of an Internal Combustion Engine

Cogeneration System 14.35 - 14.40 h Discussion 14.40 - 14.55 h Henning Albers, Sebastian Wolff, Tobias Brinkmann, Anke Schmidt,

Martin Wittmaier, H. Lambrecht, Yasmin Kornau, Institut für Keislaufwirtschaft, University of Applied Sciences Bremen

Perspectives of Material Flow Management for the Identification of Optimum Operating Conditions of Thermal Waste Treatment Facilities

14.55 - 15.00 h Discussion 15.00 h Closing Words Guided Tour through the City of Bremen

or Visit to the Energy-Company

Visit to the Energy-Company swb in Bremen

Map to the Energy-Company stadtwerke bremen Otavistrasse 7-9 28237 Bremen Route:

Zoom: