Upload
others
View
40
Download
1
Embed Size (px)
Citation preview
1/105
HPS-PMC(Process Measurement and Control)
CMM, JinSoo Seo
XDesignerPlus Training for HCiX
Honeywell
Honeywell
2/93
Purpose for this training…
Understanding Features of HCiX series
Designing of screens on XDesignerPlus
Honeywell
3/93
Titles
1. Features of HCiX
1-1. Product overview of HCiX
1-2. Communication ports
2. Menu screen of HCiX
2-1. Setup of Communication
2-2. Initial setting
2-3. Diagnosis
2-4. Information
3. XDesignerPlus Software for config.
3-1. Installation
3-2. Creation of project
Honeywell
Color TFT – LCD (65536 colors)
Touch Screen Operation
32 bit RISC CPU Processor
CE Approved(UL is under approving for DC)
IP65F Front Face Enclosure
RS-232 & RS-485 and Ethernet Comm.
Profibus (Option) with external devices.
Download/Upload Data like a configuration file, logging, recipe, Firmware and Fonts
via RS-232, USB port, Ethernet, CF Card or USB Memory.
Graphic Design Software (XDesignerPlus-Eng, Chn, Kor, Arabic)
Remote management Software (ViewClient)
Multi-Language Display (English, Chinese, Korean, imaged etc.)
Imaged characters on MS Windows OS are available like Cyrillic, others
Data Storage (CF Card and USB)
Product Overview(HCiX)
Honeywell
High Resolution Display
High Color Display (63336 colors, 16bit)
Custom Graphic Display
Ethernet Communication Support (TCP / UDP) as default
HWL and standard Modbus protocol
Flexible Interfaces with many controllers and PLCs
Profibus interface(Option)
Data sharing between HCiXs
CF(SD) Card and USB memory function Support(default)
Front USB Host and Device ports support convenient
USB memory stick interface except 5.7” and 8.4”.
Many kinds of utility software Support (Anywhere, Informiner,
CFViewer and NetView)
Multi Language Support (Windows Font)
Various Dimension & LCD Types
Support DC(20-28Vdc) & AC Power (85-264V)
Global Approvals (CE, UL)
Advantages (HCiX)
12.1”,
800 X 600
10.4”,
800 X 600
15.0”,
1024 X 768
8.4”,
800 X 600
5.7”,
320 X 240
TFT Color
10.2”,
800 X 480
7.0”,
800 X 480
Honeywell
7/93
Screen Mode
Screen Mode
- Run mode(Operating) : Running and operating (interfacing with PLC)
- Menu mode(Configuration) : default and basic for internal parameters
Menu Screen : Parameter Setup- Main Menu : Model No, PLC Type, OS version, Fonts(Kor/Eng), Date/Time
- Communication : with PLC
- Initial setup for data of parameters
- Diagnosis : Diagnosis for Hardware, Communication port
- Information : Detailed info
Honeywell
9/93
How to go to Menu from RUN mode
After turning on HCiX, push this part continuously until the configuration page appears.
Honeywell
11/93
Running XDesignerPlus
Running- Double Click this icon of XDesignerPlus on desktop
- Run ‘XDesignerPlus’ from Programs
Open project file- Double click [*.HCX] file on widows explorer.
Running XDesignerPlus software and open a project.
Honeywell
13/93
General
File menus
Editing screen data
Edit option and tools
Transmitting(Download and Upload)
Menu-Draw with various shapes
Menu-View
Menu-Project
Honeywell
15/93
Creation of project
New-New Project or ‘ctrl+N’
or
Selecting a HCiX
- Series
- Model No and resolution,
Memory type
Honeywell
16/93
Creation of project
Config of PLC and
communication type
- Vendor : Honeywell, Siemens, etc,.
- PLC model and communication type
Honeywell
17/93
Creation of project
Communication setup for
target PLC
- Config for each com. port
- Notice :
Serial communication
: Station No., comm speed, etc
Ethernet communication
: IP Address, Port, action type
Honeywell
18/93
Creation of project
Communication setup
for Serial comm
- Config for each com. port
- Notice :
whenever downloading, the set data
will be sent to HCiX
Honeywell
21/93
File-Save project
Selecting <Save Project> or <Save As Project>, save a project file in [*.HCX].
- HCX : Project file
- DP0 : Back-up file
(opened initially)
- ~DPX : Back-up file
(Save repeatedly)
Honeywell
22/93
Menu-View
Show Name/ID
Project Manager
My Clipboard
List window
Property Window
Memory Manager
Status No. : on/off
Zoom in/Zoom out : 40~400%
Language : English/Korean/
Chinese(Simplified)/Arabic for menu texts only
Honeywell
23/93
View-Project Manager
Manage the config for editing project
Screen
- Basic screen
- Window screen
- Sub screen
- Global Screen(Master/Frame)
Master screen : same as master slide(PPT)
Global Setting- Data(Logging, Recipe, Alarm, Message, Images List)
- Script : For Global and Local region(similar to ‘C’)
- Text Table for multi-lingual
Honeywell
24/93
View-List Window
Show the shapes and Tag list info
registered on current screen.
<Tab> info
- Shapes
- Tags
- Selected
- Group
Honeywell
25/93
Project
Manage all the project info
- Edit Master Screen/Property
- Alarm Setting
- Logging Setting
- Recipe Setting
- Script Setting
- Security Setting
- Message Table
- Text Table for Multi-Lingual
- Symbol Manager for addressing
- Event Log
- Project property
Honeywell
26/93
Project-Project Property
Edit project info or
add a PLC(driver).
- Change HCiX
- Change PLC
- CF/SD Card Setting
- PLC ADD(COM2, Ethernet)
- Fieldbus PLC ADD
- Config Comm parameter
- CF card setting
- Use Remote monitoring
Honeywell
28/93
Draw-Select
Select
- Shape to take a filling parameter
- Shape to take a non-filling parameter
Mouse Drag for editing
- Direction Right Left
- Direction Left Right
Overlapped shapes/Tags, Selected sequentially
- (ctrl key) + left button of mouse
Honeywell
29/93
Draw-Select
Select a object from POP-UP menu
- Dragging mouse Double click left of mouse
Multiple shapes :
- (shift key) + Left button of mouse/Drag
Entire selection
- (ctrl key) + ‘A’
Honeywell
31/93
Draw-Text(String)
Write a text/Imaged texts(String)
- Font type
- Magnification
- Color
- Line Spacing
- Background :Transparent
- Image Text
- Normal/Text Table
Honeywell
32/93
Register Bitmap image on screen.
- Supported Images :
*.bmp, *.jpg, *.jpeg, *.mbs
- Load a image from PC
- View mode : User(Adjust), Stretch
, Real(original size)
- Option : Transparent
- DISPLAY SIZE : Width, Height
Draw-Image
Honeywell
35/93
EDIT-Move/Adjust Magnification/
Move Using Mouse
- Select a shape/tag, click it on mouse pointer(+).
Using Keyboard
- Select a shape/tag, move it by using a arrow keys of keyboard.
- Space key
: Toggle, press one time, move it by grid value,
press one more time, move it by one pixel.
MagnificationUsing Mouse / keyboard
Honeywell
36/93
Edit-options
Un-do : (Ctrl key + Z)
- Un-do : Editing works from last work
Repeat
- Repeat work on Editing project from last work
Cut : (Ctrl key + X )
- Cut and Paste any object
Copy : (Ctrl key + C)
- Copying any object
Paste : (Ctrl key + P)
- After copying any object, and paste it on screen
Honeywell
37/93
Edit-Multiple copy
Copied a object to make some for shapes and tags more than 2.
- Rows(Y) / Coulmns(X)
- Pixel interval of
Row/Column
- Address Increment
- Direction X, Y
Honeywell
38/93
Edit-others
Paste : (Ctrl key + ‘V’)
: Paste an copied object to position
of mouse pointer
Paste(Same Original Position) :
(Ctrl+Shift key + ‘V’)
: Paste an object(tags) to attempt to copy
on the same position from original object
Delete (‘Del’ key)
: Delete any selected object from this editing screen
Honeywell
39/93
Edit-Group/Ungroup
Group : (Ctrl key + ‘G’)
- Set a group : to take any object more than 2
- Move/Resize the grouped object like one object
- Yellow tracker sign when any group is selected.
- when Double clicked, Property window is shown.
UnGroup : (Ctrl key + ‘U’)
- Release a grouped object
Honeywell
40/93
Edit-Assigning
Assign any objects on the screen.
- Indicating orders on the same screen
- Assign the objects Left-rigjt, Up/down,
horizon center in window
- Adjust space between objects
horizontally and vertically
- Move any object to center on screen
- Distribute objects(size)
Honeywell
41/93
Transmitting(downloading project)
Transmitting
- Build and Transfer :
Compiling and Downloading
- Execute Transmitter :
run ‘Transmitter.exe’ for up/download others..
Honeywell
42/93
Transmitter
- Execute Transmitter
- option : Ethernet/USB/Serial
- Download : PC HCiX
- Upload : HCiX PC
* Project file : *.zip
* all files are stored in PC withspecific folder
Transmission-Transmitter
Honeywell
43/93
Transmitter
- Build(Compiling)
- Option :
* Include project file in Build :
Transmitted with uploadable data
* Transmitter auto run
- Message : Result for compiling
* BUILD SUCCESS or BUILD FAILED
- Size : occupied size when compiled
Max : 26MB, but HCiX05=06MB
Transmission-Build
Honeywell
44/93
Transmitting-OS, Font(for V2.4)
Use this step to try to upgrade OS, or downgrade OS*Downgrade to V2.4, need to download Font file (Chinese or Korean for V2.4).
Honeywell
47/93
Tags(Components) for communication
Monitor of data from PLC, or Control to PLC Through communication with PLC.
Honeywell
49/93
Addressing_1
Addressing type
- PLC1, PLC2, … or alias name
- Internal : offered by HCiX(0~5119 word)
- Special : address with special purpose
- Symbol : Symbolic name from numeric address
- Constant
Honeywell
50/93
Addressing_2
How to Assign – by keypad
- Assigning the address over
MasterLogic PLC HC900
Honeywell
51/93
Addressing_3
How to Assign – Direct assign
- Directly input
- Change and indicate the address
Honeywell
52/93
Tags
Touch, Lamp and combination(Touch+Lamp)
Numeric, KeyDisplay and combination
Texts and Message tag
Message
Window
Alarm-Alarm setting, Alarm table
Graph
Logging-Recording
Honeywell
53/93
Touch_1
Purpose- Give a control action to PLC or monitor
any action.
Type- Touch(only) : Giving any action only- Touch+Lamp : multiple action
by any data from PLC.
Features- 10 action are available on a Touch tag.
Honeywell
54/93
Touch_2
Display-
InterLock-Locking condition- activated by condition(bit/word)
Operation- Bit state- Word operation- Key input: characters/numeric keys- Special Function
Information
Honeywell
56/93
Lamp_1(Indicator)
Purpose: Monitors the monitoring address by on/off
from the PLC
Type- Bit : monitor bit address- Word : monitor bit address- N-State : Monitor logical state
from multiple bit address
Honeywell
58/93
Lamp_3 (N-State)
Visual: lamp type with var. condition: 4-lamp, 8-lamp, 16-lamp
Lamp Address: Bit addresses, 2/3/4
Information: size and location
Honeywell
59/93
Numeric&String tag_1
Purpose: Indicate any data from PLC, with word,
Integer/Float, and string data
Type- Numeric : numbers, integer/float- String : only ASCII code(Eng)- Keydisplay : Numeric data+key input- Keydisplay : String data+key input
Honeywell
60/93
Numeric&String tag_2 (Numeric/String)
ITEM Address
: for Data Processing from PLC
Case
: Color by data range
Disaply
: Font type or decimal type
Information
: size and location on screen
Honeywell
61/93
Numeric&String tag_3 (KeyDisplay)
Purpose: Indicate any data from PLC and sent the specific data into PLC.
Keypad: can make a special key pad for user’s purpose
Honeywell
62/93
Numeric&String tag_4 (Keydisplay)
Setup Address
: Address for PLC or controller
Input Mode- When Touch
- Popup ‘Auto Tenkey’- Selected bit ON- Use Arrow key
Disaplay:
Information:
Honeywell
63/93
Practice- Operation-running
Display / control of bit data- Touch + Bit Lamp
Display / control of Word data- Touch + Word lamp or touch + N-State lamp
Exit from running- Touch Special funciton
Honeywell
64/93
Practice- Assigning special keys
Input Numeric data- KeyDisplay : Input mode – Auto tenkey(kepad on screen)
Input character- KeyDisplay for characters : Input mode- when Touch
Honeywell
65/93
Message Tag_1
Purpose: any message pre-reserved on [Message Table] is shown by any condition of
data from PLC.
Types- Bit Message : Depends on bit data
- Word Message : Depends on Word data
Honeywell
66/93
Message Tag_2 (Creating Message Table)
Create messages on [Project window]-[Global Settings]-[Message Table], or[Project]-[Message Table] of Menu.
Honeywell
67/93
Message_3 (Bit Message)
Message- Set the message No to indicate
Address- Address for bit data on PLC
Information- Info for message tag,
- Size, position
Honeywell
68/93
Message_4 (Word Message)
Message- Data Range
- Data Mapping
- Data Indirect
Address- Address for word data on PLC
Information- Info for word message
Honeywell
69/93
Window Tag_1
PurposePop up/down the window(s) by any condition and show the tags
Type- Bit Window : Pop up a window by bit data of address
- Word Window : Call several windows by word data of address
Features- can be Drawn several windows on main screen, but
the total windows at the same time, totally 8sets are able to show on screen4 sets for ‘Pop-up’ and 4 sets for ‘Static’
Honeywell
70/93
Window Tag_2 (Bit Window)
Depends on bit data to call window.
Window- Input a condition of bit address
- Input a window to call
Information- Position and size info on screen
Honeywell
71/93
Window tag_3 (Word window)
Depends on word data to call windowwhen it’s required to call several windows on screen, mainly this tag is used.
Window- Input a condition of word address
- set the range for word address- Set the indirect address
Information- Info about window
Honeywell
72/93
Practice- Window screen
Create a window screen
Call a window by bit address condition- use bit window tag
Honeywell
73/93
Alarm tag_1
PurposeAlarm, when any activated data by target device is changed ON/OFF, a specific info is
stored in to HMI internally, and this tag makes a message is shown a table in screen.
Type- Alarm : Shows an alarm on real time
- AlarmEx : shows an alarm on real time with several useful functions
Honeywell
74/93
Alarm tag_2 (Setting alarm list)
[Project] [Alarm setting] on Menu or[Global settings] [Alarm setting] of [Project manager] window.
Alarm lists are generated easily by editing them on MS-Excel
Honeywell
75/93
Alarm tag_3 (Alarm)
Alarm A type- Current alarm
- Alarm History
- Alarm History(CF/SD)
- Other settings
Display- Shape of alarm tag
Information- Alarm tag info, size, positions
Honeywell
76/93
Alarm tag_4 – (AlarmEx)
Extended alarm tag
Display- Table of shape
Alarm setting- Data to show
- Useful keys
- New functions(handling,…)
Information- Alarm tag info, size, position
Honeywell
77/93
Practice- Alarm screen
Input alarm data and activated alarm
Set the current alarm and show- Alarm tag to show on real time
Alarm History- Alarm tag/ AlarmEx
Honeywell
78/93
Graph tag_1
Purpose
Show a data on graph tag, data type=Word.
Type
- Bar graph : Bar, Meta, Polygonal
- Linear Graph : Show the data with linear(line) between data on real time- Record Graph : Show a logged data on graph on real time or historical data pre-logged- X/Y Chart A or B : Show the data on particular position by addresses
Honeywell
80/93
Graph tag_3 (Bar graph)
Graph - Type of graph- Address to indicate- Max, Min
Display- Color for each data
Information- Tag information, size, position
Honeywell
81/93
Graph tag_4 (Linear graph)
Purpose- Show the data with linear(line) between data on real time.- Show the several data in one graph
Honeywell
82/93
Graph tag_5 (Linear graph)
Display- Graph shape
Graph- Setting address (Max 10)
Information- Graph
Honeywell
85/93
Communication tag
Use this tag ;
Read many data from target device at the same time
Write many data to target device at the same time
Honeywell
87/93
Logging_1 (Logging setting)
Function
: Save the actual data by any condition, into internal memory or external memory like CF card or SD.
Config: [Project]-[Logging setting] on Menu
- Log condition
- Log Action
Save and copy to USB: [Project]-[Project property] on menu
: Copy from CF card to USB stick
Honeywell
91/93
Security
Security with password
Recipe
Grouping
Animation-Rotating, moving a object
Script-Programming
Multi-Lingual
Simulator
Slide
File manager
Remote View and Control
Honeywell
92/93
Security Setting-1
How to set
: [Project] [Security setting] on Menu
Purpose
- Set the password for each screen
- Set the security to access for all tags
- Settable security level to access
Honeywell
93/93
Security Setting-2
How to use
: Input PW data over window
Purpose
- Set the password for each screen
- Set the security to access for all tags
- Settable security level to access
Honeywell
94/93
Recipe_1
Recipe : Move the preset data from HCiX to controller: use this function to move the batch data in one time from HCiX or get the data group from external device
Honeywell
95/93
Recipe_2 (Setting)
Config: [Project]-[Recipe setting] on menu
- Condition of movement
: Variable, Bit
- Target address where recipe move
Save and open Recipe: Special buffer (_PARM_SAVE)
Honeywell
96/93
Grouping tags
Function: Make several shapes and Tags into a group
Config: Select tags or shapes to make a group
press right button on mouse like picture
choose [Group]-[Group] or [UnGroup]
Honeywell
97/93
Animation-Rotating,Moving the object
Function: Make an object to ‘visible’ or ‘invisible’
: Set an object to ‘move’ or ‘rotate’
in screen
Config: Select an object, press right-button
of mouse, select the special function
Honeywell
98/93
Animation-Rotating,Moving the object
Function: Make an object to ‘visible’ or ‘invisible’
: Set an object to ‘move’ or ‘rotate’ in screen
Config: Select an object, press right-button of mouse, select the special function
Honeywell
99/93
Script (Programming)
Function: make a special program to activate(run) by unique action condition
Config: [Project]-[Script] on Menu
Type- Local script : run on specific screen
- Global script : run on all screens
Honeywell
100/93
Multi-lingual
Function: show any texts(message) to indicate on screen to support on MS-Windows system
Config
- [Project]-[Text Table] on menu
- set a texts on each tag
- change the text over
Special buffer ‘_MULTI_LANG’
Honeywell
101/93
Simulator
Function: A function to check the project file easily without controller and HCi
Config: [Tool]-[Run Simulator]
or press ‘F12’ key
Honeywell
102/93
Special-Slide tag
Function: show some images with particular time-period, animation with images
Config: [Tag]-[Slide]
Honeywell
103/93
Special-FileManager
Function: A function to move or copy the stored data into external memory(CF)USB or USBCF
Config: Add a ‘Window’
Honeywell
104/93
Tool-Password for security
Function: Able to assign an authority to access for each member(worker)
Config
- Add Default Password
- make sure the screen=65533
- editable
Honeywell
105/93
Tool-Remote view and control
TopView Client
Function: Able to do remote-view and remote-control
Config
- Select two options to use
- Set a path to ‘Save to’
Honeywell
106/93
Tool-Remote view and control
TopView Client Config
- Create Rview Client
- check the execution file on patch