X10THERMOSTAT

DCN: 143-00324-02 2/02 Residential Control Systems Inc. 11460 Sunrise Gold Circle, Rancho Cordova, CA 95742 916-635-6785 www.resconsys.com

Communicating Thermostats

HVAC Zone Controls

Dampers

CommStar

Network Control Units

Keypads

Network Devices

Product Catalog #209


RCS PRODUCT CATALOG #209 September 2002

Residential Control Systems, Inc.

11460 Sunrise Gold Circle, Suite A Rancho Cordova, CA 95742

1-888-RCS-HVAC

916-635-6784

916-635-7668 Fax

Email:

Sales: [email protected] Tech Support: [email protected]

www.resconsys.com

RCS DISTRIBUTORS

SMARTHOME (CA) 800-SMARTHOME www.smarthome.com

Home Controls Inc. (CA) 800-266-8765 www.homecontrols.com

Worthington Dist (PA) 800-282-8864 www.worthdist.com

Quantum Electronics (CAN) 403-247-9176 www.quantumelectronics.com

Automation Supply (FL) 888-321-4432 www.automationsource.net/supply

HomeTech Solutions (CA) 888-257-4406 www.hometech.com

Smarthome Systems Inc. (NY) 631-361-3600 www.smarthomeusa.com

RCS is a proud member of these Industry Associations

CEA TechHome Division

CABA

CEDIA

ASHRAE


�� RCS’s series of communicating thermostat use either powerline or twisted pair networks. These advanced two part design units allow for easy “no new wires” installations.

��

TX15 X10 Thermostat • X10 PowerLine communications • Two part design (TS15 Wall Display Unit + HFX HVAC Control Unit) • Standard or Heat Pump HVAC systems • Large, easy to read LCD display with backlight • NO NEW WIRES! Easy Retrofit Installation

Model TX15 Thermostat to receive X10 Unit Codes to set setpoints or modes. Model TX15-B Thermostat with Bi-directional X10 to send and receive temperatures,

setpoints and modes.

TR15 RS232/485 Thermostat • RS232 or RS485 Serial Communications • Two part design (TS15 Wall Display Unit + HFR HVAC Control Unit) • Standard or Heat Pump HVAC systems • Large, easy to read LCD display with backlight • NO NEW WIRES! Easy Retrofit Installation

Model TR15-485 Thermostat w/RS485 Communications Model TR15-232 Thermostat w/RS232 Communications

TR36 RS232/485 Thermostat • RS232 or RS485 Serial Communications • Two part design (TS36 Wall Display Unit + HFR HVAC Control Unit) • Standard or Heat Pump Systems • 2 Stage Heat/2 Stage Cool for Standard systems • 3 Stage Heat/2 Stage Cool for Heat Pump systems • Graphical LCD display with backlight • No new wires! Easy Retrofit Installation

Model TR36-485 Thermostat w/RS485 Communications Model TR36-232 Thermostat w/RS232 Communications

RS15 Remote Temperature Sensor • Wall mount • Connects to Wall Display Units • 4 modes of operation

o Replace WDU internal sensor o Average with WDU internal sensor o Average with another sensor o Outside temperature sensor

RSP2 Pool/Spa Temperature Sensor • Pipe Mount Sensor • Connects to Wall Display Units • 16ft Cable

NEW!


Zone Controls for use with RCS TX or TR series Thermostats These zone controls enable multiple RCS communicating thermostats to control a single HVAC system. They will also work with any standard thermostat. Communicating Zone Controls for use with RCS Wall Display Units

��

ZC2S Two Zone HVAC Control Unit • 2 independent Zones • For TX15, TR15, TR36 or standard thermostats • For Standard HVAC Systems • 1 Stage Heat/1 Stage Cool • Auto Heating/Cooling changeover • 2 wire zone damper outputs for Normally Open dampers • Relay Outputs

ZC4 Four Zone HVAC Control Unit • 4 Independent Zones • For TX15, TR15, TR36 or standard thermostats • For Standard or Heat Pump HVAC Systems • 1 Stage Heat/1 Stage Cool for Standard systems • 2 Stage Heat/1 Stage Cool for Heat Pump systems • Auto Heating/Cooling Changeover • 2 wire zone dampers outputs for Normally Open dampers • Relay Outputs

ZCV2 Two Zone HVAC Control Unit • 2 Independent Zones • For use with TS30 or TS36 Wall Display Units • For use with Standard or Heat Pump HVAC Systems • 2 Stage Heat/2 Stage Cool for Standard Systems • 3 Stage Heat/2 Stage Cool for Heat Pump Systems • Auto Heating/Cooling Changeover • Selectable HP changeover with Cool or Heat (O or B) • 2 wire Zone damper outputs for Normally Open Dampers • Vent damper output, Modulating • Outside temp sensor input • RS485 CommStar network port

ZCV4 Four Zone HVAC Control Unit • 4 Independent Zones • For use with TS30 or TS36 Wall Display Units • For use with Standard or Heat Pump HVAC Systems • 2 Stage Heat/2 Stage Cool for Standard Systems • 3 Stage Heat/2 Stage Cool for Heat Pump Systems • Auto Heating/Cooling Changeover • Selectable HP Changeover with Cool or Heat (O or B) • 2 or 3 Wire Zone Damper Outputs for Normally Open Dampers • 2 wire Power Close/Spring Return or Power Open/Power Close Dampers • Vent Damper Output, Modulating • Outside Temp Sensor Input • HVAC System LAT Sensor Input • RS485 CommStar network port

NEW! Available Q1/03

NEW! Available Q1/03


��

�

ZC6R Six Zone HVAC Control Unit • 6 Independent Zones • For Standard or Heat Pump HVAC Systems • Auto Heating/Cooling Changeover • Uses TS15 Wall Display Units for zone inputs • 2 or 3-Wire Zone Damper Outputs • Vent Damper Output • Outside Temperature Sensor Input • RS232 or RS485 Communications

TS15 Zone Wall Display Unit • For use as Zone inputs • Optional Remote Sensors (RS15, RSP2) • For ZC6R Zone Control Unit

RS10B Remote Temperature Sensor • Wall Mount Sensor • Used instead of Wall Display Units • For SENSOR ONLY input to ZC6R Zone Control Units. • Can also be used with TX15 and TR15 Control Units • NEW Smaller Size! 2” x 1.5” x 1”

��

TS36 Zone Wall Display Unit • For use as Zone inputs • Graphical LCD Display • Optional Remote Sensors • For ZCV2 and ZCV4 Zone Units Only

RS12 Remote Temperature Sensor • Wall Mount Sensor • Used instead of Wall Display Units • For SENSOR ONLY input to Zone Control Units. • For ZCV2 and ZCV4 zone units only.

RS4 Remote Temperature Sensor • Outside Temp Sensor • For ZCV2 and ZCV4 Zone Control Units

NEW!

NEW!

NEW!

ZCV2 and ZCV4 Zone Control Accessories

6 Zone HVAC Control Unit


��

RD Series Standard Two Position

RDM Series Heavy Duty Modulating

RDB Series Barometric Relief

��

RD Series Standard Two Position Dampers

• Round Two Position Spring Return Dampers • Sizes 6” to 16” in diameter • Normally Open/Power Close • Normally Closed/Power Open • 2 wire 24VAC Motor • Rugged Super Strong Barrels • Patented Actuator Prevents Motor Damage • Self sealing blade for 99% seal • Quick, Easily Replaceable Motor

RDM Series Heavy Duty Modulating Dampers

• Sizes 6” to 18” in diameter • Power Open/Power Close • Floating Point Operation or 2 Position • Commercial Belimo Actuator • 3 wire 24VAC Motor • Rugged Super Strong Barrels • Self sealing blade for 99% seal

RD SERIES ROUND MOTORIZED DAMPERS, TWO POSITION, SPRING RETURN, 2 WIRE, 24VAC Model Size Normally

Open Normally Closed

6RDNO 6” X 7RDNO 7” X 8RDNO 8” X 10RDNO 10” X 12RDNO 12” X 14RDNO 14” X 16RDNO 16” X 6RDNC 6” X 7RDNC 7” X 8RDNC 8” X 10RDNC 10” X 12RDNC 12” X 14RDNC 14” X 16RDNC 16” X

RDM SERIES ROUND MOTORIZED DAMPERS, MODULATING, FLOATING POINT, 3 WIRE, 24VAC Model Size Normally

Open Normally Closed

6RDMNO 6” X 7RDMNO 7” X 8RDMNO 8” X 10RDMNO 10” X 12RDMNO 12” X 14RDMNO 14” X 16RDMNO 16” X 18RDMNO 18” X 6RDMNC 6” X 7RDMNC 7” X 8RDMNC 8” X 10RDMNC 10” X 12RDMNC 12” X 14RDMNC 14” X 16RDMNC 16” X 18RDMNC 18” X

RDB Series Round Barometric Relief Dampers

• Adjustable to 2” static pressure • Eliminate HVAC Zoning problems

RDB8 8” Diameter RDB10 10” Diameter RDB12 12” Diameter RDB14 14” Diameter


�� CommStar keypads connect to the CommStar Network Control Units to provide versatile user interfaces. These programmable keypads work to directly control devices on the CommStar network, such as lights, thermostats and security systems. Each key can also trigger a Macro command to perform multiple functions, such as group lighting, all on or all off lights, or set all thermostats back. They can even trigger complex commands across several network devices such as setting lighting, security and thermostat with one button push. Easy to use setup and programming tools are provided with the Windows based WinEVM software included with the CommStar Network Control Units.

��

KPL7 LED Keypad

• CommStar RS485 Network Device • Seven Push Buttons • Seven Red LED’s, independently programmable • 16 Keypads per network • Button labels user created • Fully programmable button/led actions • Standard single gang box installation • Screw-less snap-on faceplate • Network powered 4 wire connection • WinEVM Supports 16 KPL7 keypads • White

KPG8 Graphical LCD Keypad

• CommStar RS485 Network Device • 64x128 Graphical LCD Display • Backlight with programmable timeout • 8 Rocker Action Softkeys • 3 Programmable LED’s (Red, Yellow, Green) • 96 Screens with graphics or text labels • Re-programmable from network • 16 Keypads per network • 4 Wire Interface (2 Com/2 Pwr) • Self Contained Back Box Included • WinEVM supports 16 KPG8 keypads • Available in White or Black case

Model KPG8W Graphical Keypad, White Model KPG8B Graphical Keypad, Black


�� CommStar Network Control Units (NCU’s) are programmable automation controllers for residential or commercial buildings that make it easy to create an integrated and interoperable network of a variety of devices, such as keypads, thermostats, security systems, lighting controls and relay controls. The WinEVM programming tool makes it easy to build a complex schedule of timed events, real time if/then/else macro interactions or keypad control of remote devices. They support RS232, RS485, and X10 powerline communications for a robust set of connections to third party subsystems and network devices. All CommStar NCU’s will control up to 16 Graphical Keypads, 16 LED keypads, 32 thermostats and sensors and either onboard, Auxiliary bus or RS485 network relays controls, digital inputs and analog inputs.

��

CS30 Network Control Unit RS485 + 3 RS232 + X10

• One RS485 Port • Three RS232 Serial Ports • X10 Bi-Directional Port • Aux Bus for I/O and IR Expansion • OnQ ALC Lighting Control Channel • Real Time Clock • Flash Reprogrammable Firmware • Downloadable Schedules • WinEVM Programming Software

CS308 Network Control Unit 8 Channel RS485 +3 RS232 + X10

• 8 Channel RS485 Star Wiring Hub • Three RS232 Serial Ports • X10 Bi-Directional Port • Aux Bus for I/O and IR Expansion • OnQ ALC Lighting Control Channel • Real Time Clock • Flash Reprogrammable Firmware • Downloadable Schedules • WinEVM Programming Software

CS48 Network Control Unit RS485 + 3 RS232 + X10 + I/O

• One RS485 Port • Three RS232 Serial Ports • X10 Bi-Directional Port • Aux Bus for I/O and IR Expansion • 8 Relays Outputs • 16 Digital Inputs • 8 Analog Inputs • Flash Reprogrammable Firmware • Downloadable Schedules • WinEVM Programming Software

CSIOX I/O Expansion Unit • Adds I/O to CS30/308/48 NCU’s • 8 Relay outputs • 16 Digital Inputs • 8 Analog Inputs • Add up to 4 CSIOX per NCU


��

�8AH485 8 Channel RS485 Hub

• Add on Hub for CS30/308/48 NCU’s • 8 RS485 Channels • RS485 Master Input (Optional RS232 Input) • NO Network Termination Issues • 4000 Ft Line Length On Each Channel • 12VDC Network Power Distribution • 4 Wire Terminal Strip: 2 Power, 2 Data • Hubs can be daisy chained for 64 channels

Model 8AH485 8 Channel RS485 Hub with RS485 Input Model 8AH232 8 Channel RS485 Hub with RS232 Input

8CUR 8 Channel Relay Control Unit • CommStar RS485 Network Device • 8 SPDT Relays • 1 Amp Contacts • On/Off or Pulsed Output • Programmable Pulse Time • Group Commands • Addressable 1 to 254 • WinEVM supports 16 8CUR units

RS21 Wall Mount Temperature Sensor • CommStar RS485 Network Device • Accuracy: +/- ½ °C, +/- 1 °F• F or C mode • Addressable 1 to 254 • WinEVM supports 32 units • NEW Smaller size 2x1.5x1 • Replaces RS20

OS21 Outside Temperature Sensor • CommStar RS485 Network Device • Accuracy: +/- ½ °C, +/- 1° F • F or C mode • Addressable 1 to 254 • WinEVM supports 32 units • Replaces OS20

NEW!

NEW!


��

"#$�%��

All X10 Relay Control Units respond to X10 powerline Unit Code ON and OFF commands and have these common features:

• Settable to any House Code: A to P • DPDT Relay Outputs • 2 Amp Contacts • Latched Outputs, On = On, Off = Off • Pulsed Outputs, On = On for 1 Sec, Off = On for 1 sec • Momentary Outputs, On = On for 1 Sec, Off = Off • Responds to All Units Off command • Requires an X10 Powerline Interface Module, Model TW523 or PSC05 (not supplied).

For X10 Powerline Networks

4CUX Series Relay Control Units • 4 Channels of DPDT relays • Addressable as 1 of 4 groups per Housecode

Model 4CUXL 4 Channel X10 Relay Control Unit, Latched Outputs Model 4CUXP 4 Channel X10 Relay Control Unit, Pulsed Outputs Model 4CUXM 4 Channel X10 Relay Control Unit, Momentary Outputs

8CUX Series Relay Control Units • 8 Channels of DPDT relays • Addressable as 1 of 2 groups per Housecode

Model 8CUXL 8 Channel X10 Relay Control Unit, Latched Outputs Model 8CUXP 8 Channel X10 Relay Control Unit, Pulsed Outputs Model 8CUXM 8 Channel X10 Relay Control Unit, Momentary Outputs

16CUX Series Relay Control Units • 16 Channels of DPDT relays on 1 Housecode

Model 16CUXL 16 Channel X10 Relay Control Unit, Latched outputs Model 16CUXP 16 Channel X10 Relay Control Unit, Pulsed outputs Model 16CUXM 16 Channel X10 Relay Control Unit, Pulsed outputs

Documents

X10THERMOSTAT