X - Prize DesignNEW DESIGN for AUTOMOTIVE byANDY TECHNOLOGY – consists of Design forAll Fuel, Andy Engine, Andy bearing, Jet.ADVANTAGES:For SAME TON-HP-FUEL-ASPIRATION• ALL Fuel Used – Solids,Liquids, Gas• 1/3 Vol,1/3 Fuel, 1/3 CO2e, 2/3 CER• Higher Speed 100 > 166 kph• Higher Mileage Ton-kmpl/MPG 500 %• Lower Fare $1/10 km by Car• Andy Design Auto Weight Speed MPG Fare Ton-

MPG. kmph $/km .CAR 2 T 166 165 1/10

330[66]BUS 20 T 166 59 1/100

1180[236]

ALL Fuel

• All FuelAll Fuel : Solids like Coal, Lignite, Ag. Waste, Jetropha, Soya, Maize, Naphtha can be burnt directly RAW to get Hot-Gas.

• No process of converting to Powder,Liquid,Gas

• Liquids, GasLiquids, Gas: : Crude, Diesel, Petrol, NG, CNG, LPG, Molasses, Methanol, Ethanol.

• An additive expands rapidly in hot-gas to push piston in cylinder or spin rotary Engine fast to develop Power.

• TON-KMPL CAR 2*70 = 140 <> 28• BUS 20*25=500 <>100

ANDY TECHNOLOGY

• Andy EngineAndy Engine gets Same HP in 1/3 Volume at Nor.Asp,• Fuel 1/3 ;CO2e 1/3; CER 2/3 of Normal• 50 hp/330 cc;150 hp/1000 cc; 300 hp/2000 cc Nor.Asp

• Andy bearing, JetAndy bearing, Jet reduces Rolling Friction from 50% to 10% of power in Transport. Low friction boost Speed

from 100 to 166 kmph for same Ton-HP

• Andy Technology result in Higher Speed, Saves Time, Low Fare, Low Fuel, Low CO2e, Low Capital Cost, CER

Global Warming

• Andy Technology is applicable to Power Plant,Automotive,Rail,Ship,Ferry,VLCC.• FUEL used Per Day in Mn Ton: Fuel use Qty Andy CO2e CER Saved Fuel $Fuel use Qty Andy CO2e CER Saved Fuel $Automotive 3 1 1.75 3.50 2.00 Bn$/dayRail 1 0.33 0.58 1.15 0.66 Bn$/dayShip 3 1 1.75 3.50 1.00 Bn$/dayP Plant 3 1 2.33 4.66 0.40 Bn$/dayTotal 10 3.33 6.41 12.81 4.06 Bn$/Day

AUTOMOTIVE CARMaruti Esteem LX CAR Tata Nano

Normal Andy Design Normal Andy

1.3 1.3 Weight T 600 kg 600 kg

100 166 Speed kph 110 110

87 87 HP 33 33

1300 433 Volume cc 620 200

6.25 2.06 Fuel/hr 5.55 1.0

16 80.43 kmpl 20 110

37.76 189.8 MPG 47.2 260

20.8 104.6 Ton-kmpl 12 66

31.5 10.3 CO2e 28 5

21.2 CER 23

Automotive Bus/RailBUS VEHICLE NO-NO RAIL

Normal Andy Design Normal Andy

20 20 Weight T 1000 1000

100 166 Speed kph 100 166

250 250 HP 6,660 6,660

5000 1660 Volume cc/L 133 44.4

20 6.25 Fuel/hr 532 177.6

5 25 kmpl 0.188 0.935

11.8 59 MPG 0.443 2.20

100 500 Ton-kmpl 188 935

100.8 31.5 CO2e 2681 895

69.3 CER 1786

COST,Fare US $, MPGCost US $ COST Cost US $

Normal Andy Spec Design Spec Normal Andy

5,000 4,500 1 T CAR 600kg 2,500 2,300

10,000 9,000 2 T CAR 1.3 T 7,500 6,750

50,000 45,000 20 T BUS 40 T 80,000 72,000

Normal Design AndySpeed

kmph MPG

Fare

$/km Data

Speed

kmph MPG

Fare

$/km

100 33 1/5 CAR 2T 166 165 1/10

100 11.8 1/50 BUS 20 T 166 59 1/100

No No Rail

• Andy engine gets Same HP in 1/3 Volume• Andy bearing, Jet reduce Rolling friction &

boosts Speed to 166% for same Ton-HP• No Rails. Grooves will do.• CHENNAI - MADURAI 500 KM• Design Run Hrs Speed FARE• Now 8 hrs 80 kph $ 6.25• Andy AT 1 hr 600 kph $ 7.50

ADVANTAGE CAR

• CHENNAI - MADURAI 450 KM

• Design Run Hrs Fuel FARE

• Now 7 hrs 70 kph 32 Lit $ 90.0

• Andy AB 5 hrs 100 kph 22 Lit $ 80.0

• Andy AT 3 hrs 200 kph 12 Lit $ 70.0

Advantage Bus

• CHENNAI - MADURAI 450 KM

• Design Run Hrs Fuel FARE

• Normal 9 hrs 50 kph 180 Lit $ 5.6

• Andy AB 6 hrs 75 kph 120 Lit $ 4.4

• Andy AT 3 hrs 200 kph 24 Lit $ 5.0

BIO DATA

• Biodata of Designer :• M Andy Appan Aged 66 Yrs• Job :Transport Designer / Consultant• Qualification : M E [ Production ]• Citizen INDIA• Location Chennai. India• Contact Mobile 9109940040613• E mail: niraima@gmail.com