X-Class Series X-15A

Applications

P Audio System Co., Ltd

X-15A

The P Audio X-Class series of portable and fixed install loudspeaker systemsrepresent a unique combination of high performance and portability.TheX-15A is a powered two way sound reinforcement system designed for bothlive music and full range fixed installations. The X-15A contains a bi-ampli-fied power amplifier system featuring a full 300 watts of program power.The X-15A utilizes a 15 inch low frequency loudspeaker and an advancedflare high frequency horn. The rated coverage pattern of 90 degrees in thehorizontal plane and 40 degrees in the vertical plane make the systemideal for wide coverage applications such as live performance reinforce-ment, mobile DJ systems, dance clubs and conference reinforcementsystems.

The advanced flare horn is mated with a medium format professional com-pression driver that features high energy neodymium magnetics. The com-pression driver also features a commercially pure titanium diaphragm andedge wound aluminum voice coil to minimize moving mass and generateextended bandwidth.

The P Audio X-15A was designed using a fully discrete Bi-Polar split rail highefficiency amplifier design and active filter system. The amplifier sectionproduces a full 200 watts of low frequency program power and 100 wattsof high frequency program power. The input section of the amplifier modulefeatures both line level and microphone level inputs and separate volumecontrols for each input, allowing mixing functions for the two inputs.

The X-15A offers world class efficiency for high sound pressure level ap-plications. The one watt, measured at one meter, output is 98dB, makingthe X-15A a true world class sound reinforcement system. Maximum outputcapability is over 120dB SPL. The system offers a rated bandwidth of 50Hzto beyond 20kHz.

The X-15A features a high impact injection molded enclosure with an in-tegral 35mm stand mount adaptor and four recessed M10 mounting pointfor permanent installation applications. The system is a light weight design(42.9lbs, 19.5kg) and integral handles for easy transportation. The powdercoated metal grill and high impact polycarbonate enclosure insures theX-15A can provide high output acoustic response, even in harsh physicalenvironments.

The X-15A offers very linear frequency response and excellent fidelity fora wide range of professional applications.

Power on/off switch

Line level balanced input

Link out

Microphone level input

Line level volume control

Microphone banlanced input volume control

Active indicator

Power supply input.Make sure that the voltageselector is set for your Country’s correct voltage.

Protection fuse

Grounded screw terminal

Mains voltage input selector

X-Class Series X-15A

Specifications

P Audio System Co., Ltd

All rights reserved by P.Audio System Co., Ltd. 2007

19/4 Moo 2 T.Bangkratuk A. Samparn Nakornpathom 73210 ThailandTel: +66-2-441-6600 Auto 30 Linese-mail: info@paudiothailand.comWeb site: www.paudiothailand.com

GENERAL SPECIFICATIONSType 2 way Full Range Active Bass Reflex Power 300 Watt (Amplifier)Sensitivity 1W @ 1M 98 dBFrequency Response 50Hz-20kHzNominal Dispersion (H x V) 90° X 40°Dimension (H x W x D) 766mm x 485mm x 354mm 30.0" x 19.0" x 14.0"

POWER AMPLIFIER SPECIFICATIONSOutput Power Bi-amplified System Power 300 WattLF Amplifier 200 WattHF Amplifier 100 WattInput Sensitivity / Impedance 0.775V / 47kΩInput / Output Connectors 1 x Female XLR -Type for Line input. 1 x Male XLR -Type for link through. 1 x Mono 1/4" Jack For MIC 2 x Gain Control (Line & MIC)

Indicators Power on : Blue LEDPower Requirment AC115-120V And 220-230V / 50Hz SwitchablePower Consumption 250 W

PHYSICAL INFORMATIONLF Component 15"(380mm) Neodymium / Cone SpeakerHF Component 1.4"(35mm) Titanium Diaphragm / NeodymiumConstruction Injection - Molded High impact Polycarbonate.Grill Powder Coated Steel MeshRigging / Fitting 2 x Recessed carrying handle on top,side 1 x 35mm stand mount adaptor 4 x Recessed M10 mounting point for flying hardwareStandard Packing 1 Pc / PackUnit Weight 20.6 kg (45.3 lbs)Gross Weight 23.1 kg (50.8 lbs)Packing Dimension HxWxD (cm) 83.0 x 56.0 x 42.0 (7.23 Cu.Ft.)

Frequency Response