5
Garmin Nuvi 2597LMT LCD Replacement Use this guide to replace the LCD screen on the Garmin Nuvi 2597LMT. The screen also consists of the digitizer within, which will also be removed as a part of the whole screen. Written By: Patrick McNett Garmin Nuvi 2597LMT LCD Replacement © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5

Written By: Patrick McNett Guides/Garmin Nuvi 2597LMT L… · Garmin Nuvi 2597LMT. You may need this guide to replace the LCD if it is cracked, not showing anything at all, not responding

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Written By: Patrick McNett Guides/Garmin Nuvi 2597LMT L… · Garmin Nuvi 2597LMT. You may need this guide to replace the LCD if it is cracked, not showing anything at all, not responding

Garmin Nuvi 2597LMT LCD ReplacementUse this guide to replace the LCD screen on the Garmin Nuvi 2597LMT. The screen also consists

of the digitizer within, which will also be removed as a part of the whole screen.

Written By: Patrick McNett

Garmin Nuvi 2597LMT LCD Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5

Page 2: Written By: Patrick McNett Guides/Garmin Nuvi 2597LMT L… · Garmin Nuvi 2597LMT. You may need this guide to replace the LCD if it is cracked, not showing anything at all, not responding

INTRODUCTION

This guide will walk you through the process of replacing a faulty or broken LCD screen in yourGarmin Nuvi 2597LMT. You may need this guide to replace the LCD if it is cracked, not showinganything at all, not responding to touch, or pixelated. Make sure you are very careful when workingwith your device; you don't want to break any of the fragile components inside or rip the ribbon cableconnecting the two halves.

TOOLS:T5 Torx Screwdriver (1)

Tweezers (1)

iFixit Opening Tools (1)

Garmin Nuvi 2597LMT LCD Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 5

Page 3: Written By: Patrick McNett Guides/Garmin Nuvi 2597LMT L… · Garmin Nuvi 2597LMT. You may need this guide to replace the LCD if it is cracked, not showing anything at all, not responding

Step 1 — LCD

Turn your device over so the back is revealed and you can see the screws in the four corners.

Remove the four 3mm width by 6mm length T5 Torx screws using your screwdriver.

Garmin Nuvi 2597LMT LCD Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 5

Page 4: Written By: Patrick McNett Guides/Garmin Nuvi 2597LMT L… · Garmin Nuvi 2597LMT. You may need this guide to replace the LCD if it is cracked, not showing anything at all, not responding

Step 2

Use the plastic opening tool to pry open the device at the seam where the two halves meet, pryingall along all sides if need be.

Do it slowly so you don't accidently rip the ribbon cable that connects the digitizer to themotherboard, as well as don't completely separate the halves as this can tear the ribbon cable aswell.

Step 3

Use your tweezers to flip back the tab of the ZIF (Zero Insertion Force) Connector, that is used tokeep the ribbon cable in place.

This releases the ribbon cable separating the two halves of the device.

Garmin Nuvi 2597LMT LCD Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 5

Page 5: Written By: Patrick McNett Guides/Garmin Nuvi 2597LMT L… · Garmin Nuvi 2597LMT. You may need this guide to replace the LCD if it is cracked, not showing anything at all, not responding

To reassemble your device, follow these instructions in reverse order.

This document was last generated on 2017-06-18 11:44:13 AM.

Step 4

Use your hands to pull back the clips that hold the LCD in place.

Once you have removed the LCD you can safely set it aside.

Garmin Nuvi 2597LMT LCD Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 5