5
Garmin Nuvi 2797LMT Motherboard Replacement The motherboard has several circuits that are connected together to make the GPS work. It's important to have this part fully functional at all times. Written By: Isaias Silva Garmin Nuvi 2797LMT Motherboard Replacement Draft: 2015-12-22 Guide ID: 53005 - This document was generated on 2019-09-24 04:52:33 AM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5

Garmin Nuvi 2797LMT Motherboard Replacement · Garmin Nuvi 2797LMT Motherboard Replacement The motherboard has several circuits that are connected together to make the GPS work. It's

  • Upload
    others

  • View
    24

  • Download
    1

Embed Size (px)

Citation preview

Page 1: Garmin Nuvi 2797LMT Motherboard Replacement · Garmin Nuvi 2797LMT Motherboard Replacement The motherboard has several circuits that are connected together to make the GPS work. It's

Garmin Nuvi 2797LMT MotherboardReplacement

The motherboard has several circuits that are connected together to make the GPS work. It'simportant to have this part fully functional at all times.

Written By: Isaias Silva

Garmin Nuvi 2797LMT Motherboard Replacement Draft: 2015-12-22Guide ID: 53005 -

This document was generated on 2019-09-24 04:52:33 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5

Page 2: Garmin Nuvi 2797LMT Motherboard Replacement · Garmin Nuvi 2797LMT Motherboard Replacement The motherboard has several circuits that are connected together to make the GPS work. It's

INTRODUCTION

Here are a few easy steps on how to correctly remove the motherboard so a new one can beinstalled.

TOOLS:T6 Torx Screwdriver (1)iFixit Opening Tools (1)T4 Torx Screwdriver (1)

Garmin Nuvi 2797LMT Motherboard Replacement Draft: 2015-12-22Guide ID: 53005 -

This document was generated on 2019-09-24 04:52:33 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 5

Page 3: Garmin Nuvi 2797LMT Motherboard Replacement · Garmin Nuvi 2797LMT Motherboard Replacement The motherboard has several circuits that are connected together to make the GPS work. It's

Step 1 — Motherboard

Before you begin make sure to turnoff your GPS.

Using your T-6 Torx Screwdriver,unscrew the ten 2.38 mm torx T-6screws from the back of your GPS.

Step 2

Using the biggest plastic opening tool, pry open the GPS from the sides. You should now be ableto see everything inside the GPS.

Be careful when opening the GPS because of the ribbon attached to the screen. It can tear easily.

Garmin Nuvi 2797LMT Motherboard Replacement Draft: 2015-12-22Guide ID: 53005 -

This document was generated on 2019-09-24 04:52:33 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 5

Page 4: Garmin Nuvi 2797LMT Motherboard Replacement · Garmin Nuvi 2797LMT Motherboard Replacement The motherboard has several circuits that are connected together to make the GPS work. It's

Step 3

With the device opened, carefully remove the ribbon from the motherboard.

Unplug the three wire connectors from the motherboard.

Step 4

Using your T-4 Torx Screwdriver,unscrew six 1.58 mm T-4 Torxscrews from the motherboard.

Garmin Nuvi 2797LMT Motherboard Replacement Draft: 2015-12-22Guide ID: 53005 -

This document was generated on 2019-09-24 04:52:33 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 5

Page 5: Garmin Nuvi 2797LMT Motherboard Replacement · Garmin Nuvi 2797LMT Motherboard Replacement The motherboard has several circuits that are connected together to make the GPS work. It's

To reassemble your device, follow these instructions in reverse order.

Step 5

Now remove the motherboard out of the device. You will have two separate pieces.

Garmin Nuvi 2797LMT Motherboard Replacement Draft: 2015-12-22Guide ID: 53005 -

This document was generated on 2019-09-24 04:52:33 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 5