7/30/2019 Work Boat Vacant Positions Advert

1/2

MINIMUM REQUIREMENTS FOR ALL POSITIONS (WORK BOATS)

All applicants must comply with the standards as specified in the documentissued by the International Maritime Organisation titled "International Conventionon Standards of Training, Certification and Watchkeeping for Seafarers, 1995"(STCW), including subsequent amendments.

Applicants must be physically fit and aged not over 50 years and must be able topass the required offshore medical and all HSE Training courses commensuratewith positions applied for. Vessel Master aged 55 and below may be considered.

Applicants who are able to furnish documents indicating successful completion ofTropical BOSEIT/HUET with EBS Trainings from an OPITO accredited trainingestablishment, will have an added advantage.

All applicants must pass the Company's Charterer SETS Test and necessarymedicals including obtaining the required employment permits to work in Brunei

before the Employment Contract becomes effective.

The work cycle would require successful applicants to spend up to 6 monthsoffshore at a time.

SPECIFIC REQUIREMENTS

1. VESSEL MASTER

Hold a valid license of competency as Master, Unlimited (STCW 1995 II/2endorsement, 3000 GRT or more) which must be authenticated andverified with the relevant Government Authority of the country of origin.

Have a minimum 2 years proven experience in the offshore industry asMaster of a Vessel of similar type and size and have recent experiencewith vessels with 2 and 4 point mooring spread, including anchor handlingexperience and be able to communicate in written and spoken English,including necessary technical terminology, fluently.

Be trained and be familiar in the use of communication equipment

provided on board, shall hold at least a Radiotelephony certificate andshall be familiar with emergency radio procedures.

Be fully aware of and comply with applicable industry HSE standards.

In addition the Master must be familiar with the following functions;

Understanding of operations; Safety awareness; Permit to work (PTW); Good understanding of the IMDG Code; People Management; HEMP & Toolbox talk; Emergency Preparedness; Competent in Ship Handling, Vessel operates on Azimuth Thrusters; Good knowledge of mooring and anchoring to platforms including pulling-

off situations; Sound Gangway Rigging Management;

7/30/2019 Work Boat Vacant Positions Advert

2/2

Conversant in Anchor recovery.

2. CHIEF OFFICER

Hold a valid license of competency as Chief Officer, Unlimited (STCW

1995 II/2 endorsement commensurate with vessels size and workingarea).

Have a minimum of 2 years proven experience in the offshore industry as

Chief Officer of a Vessel of similar type and size and be able tocommunicate in written and spoken English, including necessarytechnical terminology, adequately.

3.CHIEF ENGINEER

Hold a valid license of competency as Chief Engineer, Unlimited (STCW

1995 III/2 endorsement, 3000 KW or more).

Have a minimum of 2 years proven experience in the offshore industry as

Chief Engineer of a Vessel of similar type and bhp and be able tocommunicate in written and spoken English, including necessarytechnical terminology, fluently.

4.2ND OFFICER & 2ND ENGINEER

Hold a valid certificate of competency and STCW 1995 endorsementcommensurate with the vessels size and working area.

Have a minimum of 2 years proven experience in the offshore industry as

2nd Officer or 2nd Engineer of a Vessel of similar type and size and be ableto communicate in written and spoken English, including necessarytechnical terminology, adequately.

VESSEL SPECIFICATIONS

Name of Vessel : Ajang Haidah & Ajang Hormat Type of Vessel : Work Boat Type of Operation : Well Services Support Vessel for Coil Tubing

Operations GRT : 3364/ 3242

Engine : Cummins 2684 Kw/CAT 3134 Kw Speed : 12 Knots Year Built : 2008/2007 Registry : Malaysia (Kuching) POB : 196/194 Client : Brunei Shell Petroleum (BSP)