Wittur General Info

WITTUR

Systems

MRL

Wittur believes that to be "Excellent in Components" means to know the entire lift, therefore is providing its customers worldwide with systems,

according to the respective country regulations and market requirements.

The broad Witturs product range and expertise are also reflected in the systems: either you are looking for an hydraulic or an electric lift, with or

without machine room, Wittur sales organization can support you.

1

Systems

Wittur believes that to be "Excellent in Components" means to know the entire lift, therefore is providing its customers worldwide with systems,

according to the respective country regulations and market requirements.

The broad Witturs product range and expertise are also reflected in the systems: either you are looking for an hydraulic or an electric lift, with or

without machine room, Wittur sales organization can support you.

3

Systems MRL

4

Specialties

Modernizations for existing lifts EN81-80 / SNEL

Modernization of a lift system means a partial overhauling, where some previous components are kept in use. The target of a modernization is to obtain modernized lift systems with safety and accessibility levels equal to new lift systems. A modernized lift system uses newer technologies, is easier to operate, features a reduced energy consumption and is compliant to EN81-80 / SNEL (Safety norms for Existing Lifts). EN81-80 / SNEL describes 74 hazards that must be removed from existing lift systems in the next years. It is gradually being applied in the EU, but it is also a reference standard also outside Europe. Existing lifts are being tested according to this hazard list by a certification body. The test result gives information about the current lift status and the list of components that have a higher hazard from a safety point of view. The higher hazard components must be replaced first. Wittur has been supplying components and modernization kits for existing lifts for more than 30 years. By providing specific modernization kits for specific lift models, Wittur enables quick modernization intervention with a proven reliability. Wittur sales network is at your disposal to assist you for specific modernization projects to find out the best solution for your requirements.

5

Special Components

A long experience in the lift business enables Wittur to perform special tailor-made project to produce unique lift components that can be fully integrated in prestigious buildings. Wittur cooperates actively with architects and designers to translate aesthetic ideas into performing systems and to raise the value of each project. The availability of components with a high aesthetic appeal such as glass and glass-framed panels, round doors, panoramic glass cars, combined with Wittur expertise in tailoring the execution of each single component, means that no limits are set to the quality level that it is possible to obtain.

6

Wittur is also a supplier of peculiar components for lift used in very special markets:

Marine lifts compliant with MED (Marine Equipment Directive) IMO (International Marine Organization) standards

Freight lifts, which can rely on the availability of heavy load gearless drives and hydraulic solutions

Inclined lifts that can be adapted to the physical features of the installation environment

For these special projects Wittur can capitalise on innovative solutions and specific safety components from its more than 300 international patents.

7

Marinapplications

Solutions for ship lifts

For more than 20 years Wittur has been offering to the customers its experience in the field of ship doors. Its products can be installed not only in passengers and cargo ships and off-shore platforms, but also on some of the most prestigious cruise ships, where they offer their combined high traffic capability and refined aesthetics. Versatility, reliability and robustness are the key features of Wittur landing and car doors for Marine applications. Marine execution doors and operators have been designed and tested to work in extreme environments such as pitch and roll of the ship and to respond to the request for limited maintenance interventions (once per year). All the components for Marine applications are compliant with Marine Equipment Directive (MED) and International Marine Organization (IMO) standards. Wittur doors for Marine applications can also be equipped with the following optional executions:

9

Components completely in stainless steel AISI 304 or AISI 316

IP54 or IP65 executions (to guarantee a correct work in wet enviroments that are exposed to a saline atmosphere or to adverse weather conditions)

Explosion proof execution (especially in off-shore platforms or car ferries)

Car door operator is available with SUPRA and MIDI PLUS drives (brushless drives); wiring halogen-free is also available

Doors set to a rapid assembly in the "trunk" Large diameter rollers (80 mm) for smooth and

trouble-free operations Special sills in stainless steel

There is also the opportunity to provide doors with any type of coating to meet high-level architectural requests with refined materials.

The doors are available in fire resistant executions according to MED and IMO standards; they are manufactured in two panels central opening and four panels. They are also available in telescopic one side-opening

10

Courtesy of

FINCANTIERI

Courtesy of

FINCANTIERI

Courtesy of

FINCANTIERI

Courtesy of FINCANTIERI

11

Innovation

Wittur has always been focused on innovation, meaning a continuous product improvement by structured verification processes on performance and reliability and an active participation to global and European organisations that deal with norms and standards for the lift industry.

Six Wittur Group Competence Centres are focused on product specific R&D, industrialisation, manufacturing and continuous improvement of a specific type of components

More than 300 international Patents are held by Wittur in the sector of lift components

Two test towers (49 m) at Wittur GmbH in Scheibbs, Austria, and at Wittur Electric Drives GmbH in Dresden, Germany, are available to perform any kind of validation test for new and existing products

Specific test labs are available within Wittur Group to test doors, gearless drives, hydraulics, safety systems

Constant activity of product certification according to existing and new lift codes and standards

World Wide Wittur (www): network of companies focused on global cooperation

12

Excellence in Components

Over the past forty years, the Wittur Group has grown to become the worlds leading independent supplier of components for the lift industry. The Wittur Group operates in ten production plants around the globe, serving its customers via sales companies based in twenty-one countries. These customers include the major international lift companies, as well as small and medium-sized manufacturers operating at a national level. The brands Wittur, Selcom, SAD and Omarlift enjoy the highest reputation in the marketplace, standing for quality, reliability and safety. The Wittur companies have applied for more than three hundred international patents, the results of their attention to technological innovation.

13

Our core products include doors, safety components and gearless drives, as well as cars, slings, counterweight frames and hydraulic drives. These are designed not only for new installations, but also for modernisation projects. Catering for almost every application, our range of products includes exclusive designs and finishings, heavy-duty solutions for freight, public transportation and marine installations, as well as standardised equipment all complying with international standards. Our products have received the most important certifications in many countries, under-scoring their high quality. Our VISION is Excellence in Components: we aim to be highly attractive to our customers by offering top-quality products and best-in-class service. We want to be excellent not only as individual companies, not only offering excellent products and services but, powered by our group spirit, we want to be excellent all over the world: world wide wittur. www stands for one network of global co-operation: offering the same excellent performance, applying the same principles and processes, sharing the same values, acting as one company worldwide, as Wittur. We have identified four strategic drivers focus on actions in order to achieve excellence:

Leadership and Values Customer Benefit Superior Performance Innovative Solutions

We are continually working on improvements and welcome critical feedback from our customers. This brings us one step closer to fulfilling daily our aim to supply Excellence in Components.

14

History

Wittur Group Milestones

PRODUCTION COMPANIES

TRADE COMPANIES

Horst Wittur founds his own company at the age of 26 with a start-up capital of DM 2.000: Wittur-Aufzugteile GmbH + Co, producing lift swing doors and trading in lift components

1968

Formation of SELCOM S.p.A. by six shareholders, Horst Wittur be-ing the majority shareholder

1977 Participation in Bot & Co. (today Wittur Netherlands), a sales company near Amsterdam, Holland.

Selcom Aragon (today Wittur Elevator Components S.A) was founded in Zaragoza, Spain to produce automatic lift doors.

1980

1987 Majority interest in Wegam (today Wittur S.A.R.L.), located near Paris, France was acquired to serve the French market.

All activities were bundled under the roof of LMC Management GmbH (today Wittur Holding GmbH) located in Wiedenzhausen near Munich, Germany.

1991 ILT (today Wittur PTY L.T.D) was founded in Sydney, Australia.

15

Majority interest in Asfen (today Wittur Asansr Sanayi Ve Ticaret Ltd. Sirketi), a manufacturing company for automatic lift doors, cars and slings, in Istanbul, Turkey. Omar Lift (today Wittur Hydraulic Drives) a manufacturer of hydraulic lift drives, located in Bergamo, Italy, was purchased.

1993

Establishment of Wittur sales companies in Czech Republic and Hong Kong.

1994 Wittur K.F.T, a sales company located in Budapest, Hungary was established.

Suzhou Selcom (today Wittur Elevator Components (Suzhou) Co., Ltd), a production company for automatic lift doors, was founded in Suzhou near Shanghai, China.

1995

1997 Lifteknic (today Wittur Limited), a sales company for the UK market, located near Chester, was purchased.

1998 Founding of Wittur Israel (today Wittur Ltd) near Tel Aviv, Israel. Purchase of the remaining minority shares of Wittur France (today Wittur S.A.R.L.).

SAD (today Wittur Electric Drives), a manufacturer of gearless lift drives, located in Dresden, Germany was purchased.

1999

Takeover of KONE's Competence Centre for door mechanisms, safety components and slings, today Wittur GmbH, located in Scheibbs, Austria. Takeover of SOIMET (today Wittur S.A.) in Buenos Aires, Argentina.

2000 Founding of Wittur LtdA in Londrina, Brazil to assemble door components. Founding of the sales company Wittur Sp. z.o.o located in Warsaw, Poland.

2001 Wittur sales companies in Sweden and Singapore were established.

Establishment of Wittur S.r.o. in Krupina, Slovakia.

2009

16

Organisatio

Executive Management Board

18

Stephan

Rojahn Christian

Witt Sergio Biglino

Ercment Hizal

Andreas Zwerger

Javier Navamuel

Corporate Function

Chairman, Strategy, Senior

management

Finance & Controlling, Personnel, Legal Affairs

Sales & Marketing

Research & Development,

IT

Production, Quality, Logistics

Purchasing

Local Function

Wittur Italy (Managing Director)

Wittur Turkey(Managing

Director)

Wittur Austria (Managing Director)

Wittur Spain (Managing Director)

Wittur Hydraulic

Drives Wittur Electric

Drives

Regional Responsibility

Rest of the world

Russia & CIS (Commonwealth of Independant

States)

China South America

19

Plants

Profils

WITTUR S.P.A.

Italy

Founded: 1977 Address: Via Macedonio Melloni n 12, I - 43052 Colorno

(Parma), Italy Surface: 58.000 m (32.300 covered)

Tel. +39 0521 3111

Fax +39 0521 311200 e-mail:[email protected]

Center of Competence Door Systems

20

WITTUR GMBH

Austria

Founded: 1968, joined Wittur in 2000 Address: Sowitschstrasse 1, A-3270, Scheibbs, Austria

Surface: 33.000 m (20.000 covered)

Tel. +43 7482 42542 0 Fax +43 7482 42542 32

e-mail:[email protected]

Center of Competence Safety Devices, Mechanisms, Car Slings

21

WITTUR ELEVATOR COMPONENTS S.A.

Spain

Founded: 1980

Address: Polig. Ind. Malpica, Calle E - No.8, 50016 Zaragoza, Spain

Surface: 42.000 m ( 22.000 m covered)

Tel. +34 976 76 3900 Fax +34 976 76 3901 e-mail:[email protected]

Centre of Competence Systems

22

Wittur Asansr San. ve Tic. Ltd. Sti.

Turkey

Founded: 1980, joined Wittur in 1993 Address: Y Dudullu Organize - Sanayi Bolgesi n 13, TR-34776

Istanbul ,Turkey Surface: 12.000 m (7.000 covered)

Tel. +90 216 415 5567 Fax +90 216 415 5568


Center of Competence Cars

23

WITTUR ELEVATOR COMPONENTS CO. LTD.

China

Founded: 1995 Address: No.18 Shexing Road - Beishe Township Wujiang -

Jiangsu Province PRC 215214 - China Surface: 40.000 m (11.000 m covered)

Tel. +86 512 632 20 888 Fax +86 512 632 20 044


24

WITTUR LTDA

Brazil

Founded: 2000 Address: Rodovia Celso garcia Cid, 1406 Camb, Parana - Brazil

Surface: 20.000 m (2.400 m covered)

Tel. +55 11 5032 0818 Fax +55 11 5032 1622


25

WITTUR S.A.

Argentina

Founded: 1970, joined Wittur in 2000 Address: Av. Belgrano 2445, Sarandi - Pcia. de Buenos Aires -

Argentina Surface: 12.000 m (10.000 m covered)

Tel. +54 114 138 9200 Fax +54 114 138 9202


26

WITTUR ELECTRIC DRIVES GMBH

Germany

Founded: 1997, joined Wittur in 1999

Address: Offenburger Str. 3, Dresden - Germany

Surface: 9.000 m (4.500 m covered)

Tel. +49 351 40440 Fax +49 351 4044111


Center of Competence Electric Drives

27

WITTUR HYDRAULIC DRIVES S.R.L.

Italy

Founded: 1993 Address: Via F.lli Kennedy, 22 / D

Bagnatica (BG) - Italy Surface: 36.000 m2 (8.500 m2 covered)

Tel. +39 035 689611 Fax +39 035 689671


Center of Competence Hydraulic Drives

28

WITTUR S.R.O.

Krupina, Slovakia

Founded: 2009

Surface:39.000 m ( 5.000 m covered) Address: Wittur s.r.o.

Priemyseln ulica 2747/7 SK-96301 KRUPINA

SLOVAKIA

Phone: +421 45 5258 - 805 Fax: +421 45 5258 - 816


29

Reference Projects

Skyview

Ericsson Globe, Stockholm, Sweden

Wittur has supplied a special motorized landing door with a single full glass panel (1300x2000 mm) for Ericsson Globe's Sky View, one of the biggest attractions in Stockholm, Sweden. A spherical glass lift carries people up the outside of the Globe, the largest spherical building on earth. An extraordinary view of the city can then be enjoyed at 130 meters above sea level. An additional electromagnetic lock on the door drive system and an impact tested panel guarantee the utmost safety level.

30

Outstanding Buildings

Featuring Wittur components

Many buildings feature Wittur components in their lift

systems.

Would you like to know more? Please have a look at this

worldwide gallery of some outstanding buildings using

Wittur lift components.

31

Westhafen

Tower, Frankfurt, Germany

Torre Sacyr,

Vallehermoso, Spain

Is Kuleler, Istanbul, Turkey

Turning Torso,

Malm, Sweden

Pirelli tower, Milan, Italy

Torre Agbar, Barcelona,

Spain

Hotel Puerta

America, Madrid, Spain

Beijing

National Stadium,

China

Beijing

National Grand

Theater, China

Central Train station, Berlin,

Germany

32

Airport of Madrid

Barajas, Spain

Metro of Madrid,

Spain

Airport of

Barcelona, Spain

Kanyon Tower,

Istanbul, Turkey

Hyatt Center, Chicago, USA

Isozaki Tower, Bilbao, Spain

Q1 Tower, Gold

Coast City, Australia

33

Westhafen Tower, Frankfurt, Germany

34

Is Kuleler, Istanbul, Turkey

35

Beijing National Stadium, China

Beijing National Grand Theater, China

36

Pirelli tower, Milan, Italy

37

Torre Sacyr, Vallehermoso, Spain

38

Torre Agbar, Barcelona, Spain

39

Central Train station, Berlin, Germany

40

Puerta America, Madrid, Spain

41

Airport of Madrid Barajas, Spain

42

Airport of Barcelona, Spain

43

Hyatt Center, Chicago, USA

44

Metro of Madrid, Spain

45

Q1 Tower, Gold Coast City, Australia

46

Kanyon Tower, Istanbul, Turkey

47

Isozaki Tower, Bilbao, Spain

Petruzzelli Theatre, Bari Italy

48

Spider Car, Petruzzelli Theatre, Bari - Italy. Courtesy of

Elevatori Srl

49

Spider Car, Petruzzelli Theatre, Bari - Italy. Courtesy of Elevatori Srl

50


Elevatori Srl

51


Elevatori Srl

52

Spider Car , Petruzzelli Theatre, Bari - Italy. Courtesy of

Elevatori Srl

53

Spider Car , Petruzzelli Theatre, Bari - Italy. Courtesy of

Elevatori Srl

54

Spider Car,

Petruzzelli Theatre, Bari - Italy. Courtesy of Elevatori Srl

55

Cruise Ships For more than 20 years Wittur has been offering to the customers

its experience in the field of ship doors.

Would you like to know more? Please have a look at this gallery of Wittur ship doors.

56

WITTUR PRODUCTS 1.Landing door

57

Landing door

58

Landing door

59


61


62


63


64

2.car door

66

3.Over Speed Governors

67

4.CARS

OTTO

70

OSAKA

71

ORLANDO

72

MUNICH

73

MONTE_CARLO

74

MANHATTAN

75

LOS_ANGELES

76

ISTANBUL

77

H_PACK

78

HOUSTON

79

COPENHAGEN

80

BOSTON

81

BONN

82

BERLIN

83

ATLANTA

84

AMESTERDAM

85

ROMA

86

ROTTERDAM

87

TEXAS

88

TORONTO

89

5.Safety Devices

90

6.Shaft Accessories

102

7.Hydraulic Drives

105

8.Gearless Drives

109

9.Systems

113

118

wittur

Documents

Wittur General Info