Embed Size (px)
Citation preview
MADE IN AUSTRALIA
With a ton of trailer behind you, you really need to be in control.
The REDARC range of electric trailer brake controllers put you in charge... not your trailer.
Designed for use with trailers, horse floats, camper-trailers, boat trailers and caravans with electric brakes, you can adjust the amount of braking with the turn of a knob.
Your trailer behaves exactly as you expect it to whenever you apply the vehicle brakes.
What’s more, you can apply the trailer brakes independently of the towing vehicle’s brakes, giving you absolute control over your trailer (no more uncontrollable sway).
Benefitsn Ensures safe braking when towing a trailer
n No more hitting your knees on your brake controller (remote head version)
n Simple, pop-out switch installation (remote head version)
n Allows towing of trailer from multiple vehicles (trailer mount version)
n Simple to operate and easy to install
www.redarc.com.au
AustraliaPhone (08) 8322 4848Fax (08) 8387 2889
InternationalPhone +61 8 8322 4848Fax +61 8 8387 2889
REDARC ElectronicsABN 77 136 785 092
23 Brodie Road (North)Lonsdale, South AustraliaAustralia 5160
N3533
See the REDARC electric trailer brake range at your nearest auto-electrician or 4WD specialty store.
Copyright © 2012 REDARC Electronics Pty Ltd. All rights reserved.3975-EB-121210
Electric trailer brake controller range and associated productsModel EB EBRH EBTM EB24A
Application 12V self-contained trailer brake controller
12V remote head trailer brake controller
12V trailer mount trailer brake controller
Adaptor to permit use of EB, EBRH or EBTM on 24V
1, 2 or 3 axles � � � �
Remote head kit �
In-vehicle mount � � �
Trailer mount �
EB range wiring for 12V system vehicle EB range wiring with EB24A for 24V system vehicle
Both installations apply to EB, EBRH and EBTM trailer brake controllers.
Also available - the REDARC Break-Safe rangeWhere the gross towed mass (GTM) exceeds 2 tonnes the electric braking system must be fitted with a break-away system that causes the brakes to be applied if the trailer becomes disconnected from the towing vehicle.
The Break-Safe range
BA6000 to suit 2 and 4 wheel electric brakes
BA6000XP to suit 6 wheel electric brakes
RM6000 remote monitor to suit both kits
The EBRH electric trailer brake controller with remote headThe EBRH electric trailer brake controller has all the features of other EB models and more.
The dual-purpose remote mountable switch fits neatly into an easily accessible position and:
n allows the driver to vary the braking power to the trailer brakes when the vehicle brakes are applied
n has a push button which, when depressed, manually applies the trailer brakes independently of the towing vehicle brakes.
The LED has two functions:
n it illuminates green indicating the vehicle is towing a trailer which has electric brakes
n it illuminates red when the vehicle brakes are applied... the stronger the braking, the more red it becomes.
