Upload
jamesstenhouse
View
213
Download
0
Embed Size (px)
Citation preview
8/20/2019 Wired Liquid Level Sensor Setup
1/2
Acoustic
Click the “Expand / Collapse” toggle
to reveal setup opons
Click “Acousc Sensor”
Select a gas gun from the drop
down. No further setup is needed
for gas guns
Select a PT from the drop down
list, then click “Setup PT” and
follow the direcons for sensor
setup on the next page.
Connect Well Analyzer to
computer with USB cable and power on. Connect Well
Analyzer to desired sensors.
Start TAM (if not already running).
Click “Setup Hardware”.
1 Connect Well Analyzer & Sensors
2 Select & Configure Sensors
If the desired sensor does not appear in
the drop down list, click “Create New”.
Enter the sensor’s serial number to add
the sensor to the drop down list.
Wired Liquid Level Sensor SetupWired Liquid Level Sensor SetupWired Liquid Level Sensor Setup
QAD 5000‐3
8/20/2019 Wired Liquid Level Sensor Setup
2/2
Click the “Coeff ” tab and
verify the coefficients
Click the “Zero Off set” tab,
then click “Get New Off set”
Click “Use Shown Value” to
accept new
off set
Click the “Well Analyzer” buon to return to the main setup screen and configure other devices, or close the
popup window to proceed with tesng. Changes will save automacally.
Verify that the pressure is atmospheric
3 Open Detail Screen 4 Enter Coefficients
5 Zero Offset (For PT’s Only)
Click the “Setup” buon next to
the sensor name.
Wired Liquid Level Sensor SetupWired Liquid Level Sensor SetupWired Liquid Level Sensor Setup
QAD 5000‐3