Winter 2021 RESUME OOK...Analytical Graphics, Inc. (AGI) May 2020 – Sept 2020 • Completed mission design of a 244-satellite constellation in Systems Tool Kit (STK) for global wildfire

SIGMA GAMMA TAU

AEROSPACE ENGINEERING HONOR SOCIETY

UNIVERSITY OF MICHIGAN CHAPTER

Winter 2021 RESUME BOOK

Full-Time – By Focus Area

Dear Recruiter, Thank you for taking the time to consider the University of Michigan chapter of Sigma Gamma Tau. Sigma Gamma Tau is the honor society in aerospace engineering. Membership is limited to the top 20% of sophomores, top 25% of juniors, and top 33% of seniors, as measured by GPA; graduate students are also given the opportunity to initiate. Initiation requirements and the process itself are quite rigorous. We believe all members must demonstrate dedication and excellence in coursework, leadership, community outreach, and mentorship. Corporate events, lab tours and seminars, social gatherings, and IM sports are some of the many programs SGT offers. In addition to professional and academic development opportunities, SGT members are also actively engaged at the university and in the community. Members regularly conduct tutoring and review sessions, and volunteering events occur frequently throughout the term. The following resumes represent a wide breadth of achievement and experience. Members include project team leaders, researchers, volunteers, and leaders in the aerospace department and the university. This copy of the resume book encompasses all members seeking full-time opportunities. Thank you again for your consideration of SGT! If you have any questions about our organization, or would like to coordinate a corporate event in the future, I would be happy to assist; my email is [email protected]. Sincerely, Catherine Philpott External Vice President Sigma Gamma Tau

mailto:[email protected]

Aerodynamics

MARC CHATTRABHUTI 14812 Otsego Street • Sherman Oaks, CA 91403 • [email protected] • (818) 438-9166

OBJECTIVE Highly disciplined and detail-oriented college graduate student with practical engineering experience seeking full-time employment in the aerospace industry. EDUCATION University of Michigan - Ann Arbor, MI Master of Science in Aerospace Engineering Sept 2020 – Current Expected Graduation: May 2020 (Current GPA: 4.0/4.0) Bachelor of Science in Aerospace Engineering Sept 2015 – May 2020 Magna cum laude (GPA: 3.6/4.0) EXPERIENCE The Boeing Company – Boeing Space and Launch, El Segundo, CA Electrical and Mechanical Engineering Intern Jun 2019 – Feb 2020 ● Analyzed Boeing and supplier specifications to create 3D models for satellite parts using Creo Parametric, and created

minimally-dimensioned/source-controlled drawings for use in Teamcenter. ● Communicated with Boeing procurement agents and engineers from outside departments to expedite disposition of

existing parts, and gained working knowledge of internal procurement policies. ● Built and verified pad patterns for PWB design compliant with IPC standard 7351B, using Mentor Xpedition and PCB

Library Expert, for both space and avionics applications. ● Conducted independent 1D and 3D satellite thermal analysis using NX11 and FloEFD/FloMaster while studying at

the University of Michigan. PPG Aerospace - Sierracin / Sylmar Corporation, Sylmar, CA Manufacturing Engineering Intern Jun 2016 – Aug 2016 ● Worked with process and manufacturing engineering department, under a supervising engineer, on various projects

dealing with transparencies for commercial and military aircraft, namely the V-22 and Bell JMRTD. ● Identified and solved various V-22 production line issues, particularly scratch reduction, using DMAIC and data

analysis, and supervised/recorded factory workers through the part production process. ● Published engineering documents on company intranet and pioneered a work instruction template to be used by

factory workers on all aircraft production lines.

PROJECT EXPERIENCE University of Michigan, College of Engineering, Ann Arbor, MI Advanced Instrumentation and Measurement: Optimized 3D-Printed Boeing 787 Window Section Sept 2019 – Dec 2019 x Cooperated with Aerospace undergraduate team to effectively optimize and print a scaled Boeing 787 composite

window section with non-homogeneous material distribution, reducing its Stress Concentration Factor x Used MATLAB and Digital Image Correlation software, along with uniaxial loading experiments to characterize the

3D printing materials and test our composite window sections. x Achieved a 22.5% reduction in near-hole stress and 72.0% reduction in near-hole strain after optimization. x Delivered a final technical paper which explored the effectiveness of optimized 3D printing given our results, and

won 4th place in the 2020 George M. Landes Prize for Technical Communication. SKILLS Computer: Matlab, MS Excel, CATIA, STAR-CCM, Creo Parametric, Xpedition, Teamcenter, Windchill, NX11, FloEFD Intermediate German Proficiency, Licensed Private Pilot, Strong Interpersonal Skills/Communication, VR Experience ACTIVITIES Sigma Gamma Tau Honor Society Jan 2018 – Current

LAUREN CITKOWSKI 43651 Antietam Drive, Canton, MI 48188 ● [email protected] ● 734.740.2781

EDUCATION University of Michigan – Ann Arbor Expected graduation: May 2021 BSE Aerospace Engineering – GPA: 3.458/4.0

CORPORATE INTERNSHIPS / PROJECT EXPERIENCE Ford Motor Company – Intern Ford Performance Motorsports qqq

x Created and delivered feasibility study for all new off-road racing program at Director level meeting x Authored original MatLab program scripts for vehicle modeling to be integrated into full course simulation x Evaluated competitiveness of proposed vehicle; advised alternate methods for success based on calculating the resulting

improvements from the suggested changes x Analyzed vehicle run data to provide team with recommendations for necessary performance parameters that the vehicle

should perform to for success Program Management – Mach E Battery Electric Vehicle Development & Prototype Build

x Worked extensively with Roush and developed a build orientation presentation detailing new vehicle content and build plan x Drove alignment between Ford D&R Engineers and Roush to deliver vehicle changes, including new added content x Led daily Chief-level shortage/job stopper presentation, enabling a focused discussion of help needed

and supplier support required x Facilitated weekly cross functional team alignment (Ford Performance, Body Engineering, New Models,

Program Management) to support a late-add request for a Ford Performance demonstration unit x Interfaced with external suppliers to drive on-time part deliveries (and verify containment plans when

necessary) to support Marketing and Media Launch unit development work-streams Diesel Engines (Selective Catalytic Reductions)

x Tested vehicles equipped with emissions control technology to ensure performance to standards x Analyzed data to determine emissions patterns between different vehicle types and driving patterns x Drove in different conditions to better understand user experience and interaction with the implementation

Multidisciplinary Design Team – Research Fellow Miniature Tether Electrodynamics Experiment (MiTEE)

x Worked within the Orbits, Attitude Determination, and Control Subsystem to design, test, and implement flight software and sensor systems

x Characterized and tested solar cells and photodiodes to aid in CubeSat attitude determination while in orbit x Built solar panels and soldered solar cells for on-board flight implementation x Researched theory behind GPS/magnetometer attitude determination to aid in the development of the code and determined

the ideal hardware to be used x Authored build/test procedural documents to record processes created while working

Space Physics Research Laboratory – Student Engineer Polar Experimental Network for Geospace Upper atmosphere Investigations (PENGUIn)

x Soldered and assembled battery connectors for upcoming science mission x Prepared batteries for connector implementation x Organized inventory from previous projects to reduce unnecessary spending

SKILLS

Æ Matlab Æ Soldering

Æ Autodesk Inventor Æ CATIA

Æ Solidworks Æ AutoCAD

ÆStarCat5 ÆStarCMM+

Jan 2018 – Apr 2020

Apr 2019 – Mar 2020

Jun 2020 – Jul 2020

Jun 2016 – Jul 2016

Jun 2019 – Aug 2019

x Active Member: Women in Aeronautics & Astronautics x Active Member: Sigma Gamma Tau Aerospace Engineering

Honor Society x Course Grader: AERO 225 (Gas Dynamics)

AERO 325 (Aerodynamics)

x Ginsberg Center Social Justice cord recipient x Course Facilitator: ALA 171 (Making the Most of

Michigan) freshman student seminar x Mentor: “IncoMing” program for freshman students x University Honors & Dean’s List


Tanner Dean Baltimore, MD 21210 / (248)-977-7608 / [email protected]

I am a dedicated Senior attending the University of Michigan currently looking for a full-time position focused on propulsion. The whole concept of space has fascinated me for my entire life as I have looked up to the stars. Learning about the wonders and mysteries of the cosmos is a big reason why I’m in the aerospace program today. I want the ability to share my passion with others by providing them with the excitement of space launches, moon landings and hopefully in the future, interplanetary travel. I am really excited about space travel and dream that I can be a part of the next wave of space exploration.

Education University of Michigan - Ann Arbor, MI April 2017 - Present Bachelor of Science in Aerospace Engineering | Minor in Physics GPA: 3.45/4.00

x University Honors awarded at the annual University of Michigan Honors Convocation 2020 Anticipated Graduation: June 2021 Stoney Creek High School - Rochester, MI September 2014 - June 2017

Activities Student Space Systems Fabrication Lab September 2018 – June 2019 CanSat Team

x Member of the mechanical subgroup x Designed and Manufactured a small satellite for the American Astronomical Society’s annual competition x Managed the design of the competition’s focus, an auto-gyro descent mechanism

Hovercraft Competition January 2019 – April 2019

x Designed and built a hovercraft capable of controlled turning and mass pickup for a class competition x Headed the design of the mass pickup system x Coordinated the construction of the structures as well as the turning mechanism for the craft

American Institute of Aeronautics and Astronautics (AIAA) January 2020 - Present Member of the University of Michigan Student Branch Sigma Gamma Tau National Honor Society for Aerospace Engineering January 2020 – Present Member University of Michigan Club Baseball September 2018 – Present

Skills x MATLAB x Python x Working knowledge in C++ x Catia

Work Experience

Panera Bread – Ann Arbor, MI May 2019 – January 2020 Delivery Team

x Prepare and safely deliver meals to customers

Atwaters Bakery & Café - Baltimore, MD May 2018 – August 2018 Bus Boy

x Cleaned tables and washed dishes x Aided the chefs in times of need

Onyx Ice Arena - Rochester, MI December 2015 – August 2017 Lobby Attendant/Skate Guard

x Coordinated with coworkers to ensure the safety of people during public skating x Oversaw the cleanliness of the arena by mopping, sweeping, taking out the trash, and completing the daily needs of opening and closing

Leadership

LDS Church December 2014 – December 2015 President of Teachers Quorum

x Supervised young adults within the church by managing group meetings and providing improvements within the quorum Co-president of Seminary church class September 2014 – June 2017

x Worked with church supervisors to run a four-year church program for high school students x One-hour 6am class that began every weekday throughout all of high school


Autonomous Systems

Max Pierce Housner Address: 1735 Sandy Creek Ln. Ann Arbor, MI 48103 | Phone: (734) 358-8744 | Email: [email protected]

LinkedIn: https://www.linkedin.com/in/maxhousner/ EDUCATION University of Michigan, Ann Arbor, MI Bachelor of Science in Engineering in Aerospace Engineering April 2021 Minor in Computer Science, Minor in Music GPA: 3.89/4.00 EXPERIENCE Miniature Tether Electrodynamics Experiment (MiTEE), Structures Team Member Ann Arbor, MI University of Michigan, Multidisciplinary Design Program May 2019 - Present • Designed and manufactured the aluminum and plexiglass structural support case, transportation container, and

thermal testing platforms for the MiTEE-1 CubeSat to prepare for final testing and launch delivery • Currently working towards MiTEE-1’s launch in January, and developing the preliminary structural design of

MiTEE-2, using Siemens NX and ANSYS to design components and run simulations Autonomous Fire-Fighting UAV Prototype, Lead Software Engineer Ann Arbor, MI University of Michigan, College of Engineering Sept 2020 – Dec 2020 • Designed and tested, in an accelerated schedule, Python fire-recognition software integrated with an autonomous

flight computer to recognize wildfires from satellite imagery, generate an efficient drone route, and deploy a payload • Completed prototype design on a six-person team focusing on communication, project organization, and cooperation

Global Wildfire CubeSat Constellation Team Lead, Corporate Systems Engineering Intern Exton, PA Analytical Graphics, Inc. (AGI) May 2020 – Sept 2020 • Completed mission design of a 244-satellite constellation in Systems Tool Kit (STK) for global wildfire detection

and response, which included complete CubeSat design, constellation optimization, orbit designs, visual and infrared imaging, communication links and relay, launch system design, and firefighter response plans

• Developed Python code to model wildfire growth and recognize randomly generated fires in infrared heatmaps • Wrote help articles, created customized scenarios, developed integration code, and effectively communicated with

experts within the company to solve high level engineering and software problems for customers and coworkers • Achieved STK Master, STK Master Integration, STK Grand Master, ODTK, and TETK Certification

Research Assistant for the Director of Political Studies Ann Arbor, MI University of Michigan Institute of Social Research May 2018 – August 2018 • Examined and edited the American Political System textbook by collecting data for graphs and figures, then used MS

Excel to log text and data updates for the production of the 4th edition of the textbook • Analyzed the constitutions of 10 foreign countries to extract data on the upper legislative house, organizing and

summarizing information into digestible case studies to assist the director in creating a research report LEADERSHIP University of Michigan Marching Band Ann Arbor, MI Section Leader, Rank Leader, Business Staff Member, and Fanfare Band Member August 2018 – Present • Currently leading 65 trumpets through a virtual marching band experience by recording visual marching modules,

providing live musical instruction and audio recordings, and daily marching and playing feedback • Together with 11 other rank leaders, instructed and evaluated 380 band members on marching and playing technique

to continue the tradition of excellence and perfection of the Michigan Marching Band

SKILLS Applications: Systems Took Kit (STK), Orbit Determination Tool Kit (ODTK), Siemens NX, Teamcenter, STAR-CCM+, SolidWorks, CATIA, ANSYS, Anaconda, Spyder, Jupiter Notebook, XCode, MS Office Computer Languages: MATLAB, C++, Python, JavaScript, HTML Performance: Trumpet (jazz/classical/marching), Piano, Electric Bass, Singing, ComCo - Improvisational Comedy HONORS AND AWARDS Tau Beta Pi Engineering Honor Society Member, 2018-2021 Sigma Gamma Tau Aerospace Engineering Honor Society Member, 2020-2021 Donald R. Shepherd Scholar, 2020-2021 University of Michigan Engineering Dean’s List, 2017-2021

Alexander Philpott 303-579-9557 5395 Nassau Circle E [email protected] Englewood, CO 80113

EDUCATION M.S.E., Aerospace Engineering University of Michigan, Ann Arbor, MI GPA: 4.0/4.0 May 2021 B.S.E., Aerospace Engineering, Minor in Physics University of Michigan, Ann Arbor, MI GPA: 4.0/4.0, summa cum laude December 2019 WORK EXPERIENCE SpaceX Hawthorne, CA Associate Engineer – Post Grad, Customer Operations & Integration March 2020—August 2020

• Developed “Deorbit Browser”: Flask/Polymer website for Crew Dragon operators to assist with contingency deorbit site selection, saving 20 minutes of operator time every orbit and integrating sources of truth

• Devised deorbit site selection algorithm to recommend best locations that satisfy geographic and weather rules • Created production and deployment pipeline for Deorbit Browser to automate verification and increase reliability • Released and actively supported Deorbit Browser during critical launch and departure operations for Demo-2

SpaceX Hawthorne, CA Customer Operations & Integration Intern May 2019—August 2019

• Developed set of criteria to define global, preferred regions for emergency Crew Dragon landings • Built Python scripts to generate geospatial representations of preferred deorbit regions for further analysis • Delivered script to create table of deorbit opportunities into preferred regions for astronaut use on-orbit • Designed script to combine similar Crew Dragon alerts for bulk editing, allowing expediated review

DigitalGlobe (Maxar) Westminster, CO Satellite Navigation Systems Intern May 2018—August 2018

• Developed orbit propagator (included semi-major axis, RAAN, and inclination change) to optimize phasing orbits for DigitalGlobe’s next constellation, resulting in delta-V savings of 7.5%

• Built Python software that interfaced with external API, delivering propagations into collision avoidance software and aiding analysis on ~10 high-risk potential collisions per week

• Trailblazed demo cloud-hosted service with Angular (JavaScript) front end and Django (Python) back end • Monitored constellation of 5 satellites for potential collisions with space debris and other satellites

SpaceX Hawthorne, CA Flight Reliability Intern January 2018—May 2018

• Analyzed historical wind data to derive design requirements for pad structures at NASA’s Launch Complex 39A • Developed Python scripts to automate data collection to update failure rates for Crew Dragon risk model

DigitalGlobe (Maxar) Longmont, CO

Satellite Navigation Systems Intern May 2017—August 2017 • Built Perl script to automatically check automated processes, notifying of errors and anomalies sooner than previously • Designed interactive dashboard website to display real-time status of all processes in one place

PROJECT EXPERIENCE Ann Arbor, MI Michigan Aeronautical Science Association (Student Rocket Design Team) 2015—2020

• Co-led team of ~4 students for design, simulation, and manufacture of bell nozzle, utilizing Rao’s Method • Led project with 4 other students to create prototype feedback pressure control system for propellant tanks, using

solenoid and motorized needle valve as actuators • Managed 2018-2019 budget of $150,000, Treasurer from June 2016 to December 2017, June 2018 to May 2019

SKILLS Languages: Python, MATLAB, Perl, C++, Ruby, JavaScript, HTML, CSS, Angular, and Swift Software: Linux, SolidWorks, Ansys, STK, Django, AWS, Flask, Polymer, Docker, Sentry, Bamboo Notable Courses: Astrodynamics, Controls, Navigation and Guidance, Structures, Dynamics Portfolio: http://bit.ly/APportf

Catherine Philpott US Citizen

303-579-9397 5395 Nassau Cir E [email protected] Englewood, CO 80113 EDUCATION B.S.E. Aerospace Engineering, Minor in Computer Science University of Michigan, Ann Arbor, MI GPA: 3.87/4.00 December 2021 WORK EXPERIENCE SpaceX Redmond, WA Constellation Operations & Automation Intern Aug – Dec 2020

x Developed Flask website to display recent conjunction event information for Starlink constellation and statistics on all past events, reducing time previously spent gathering information by 10x

x Built Python scripts to automatically store published Starlink ephemerides, analyze ephemerides for accuracy relative to GPS data and generate statistical analysis over time

x 12-week internship extended by 3 weeks

Analytical Graphics, Inc Exton, PA Software Development Intern May – Aug 2020

x Developed new functionality, fixed bugs, created unit tests, and wrote documentation for STK Components API (written in C# and Java) to be used for high-fidelity aerospace analysis

x Created trailblazing demo code and in-depth documentation on how to use Java API in Python o Designed to create analysis with Components API and analyze results with Python-native tools

Analytical Graphics, Inc Exton, PA Corporate Systems Engineering Intern May – Aug 2019

x Developed updates to Systems Tool Kit (STK) Orbit Tuner plugin to allow user to change orbital element values, visualize associated changes to vectors/angles in 3D window (written in C#), and patched existing bugs

x Diagnosed STK technical issues, providing solutions through clear communication via phone/email to customers x Closed 51 cases with average initial response time of 1.71 hours and average open to close time of 33.88 hours

PROJECT EXPERIENCE Lunar Cycler, Aerospace System Design Jan – April 2020

x Determined requirements for lunar space station to house astronauts/goods as part of transportation system between Earth and Moon with team of seven others

x Designed power generation, station keeping and life-support systems to maintain requirements & drivers x Modeled orbit & station keeping maneuvers to maintain at 27q inclination at 100 km altitude using STK

LEADERSHIP, ACTIVITIES, AND INTERESTS Women in Aeronautics and Astronautics, President Dec 2019 – Present

x Facilitated and organized recurring events with visiting speakers to discuss overcoming adversity x Liaised with Aerospace Department and other student organizations to organize collaborative events x Discussed student concerns with Aerospace Department to address and improve policies during COVID-19

Undergraduate Engineering Student Advisory Board, Aerospace Department Representative Sept 2019 – Present

x Working with Dean of Undergraduate Education to improve engineering students’ on-campus experiences

SKILLS AND AWARDS Languages: C#, MATLAB, C++, Python, Java, Swift, HTML, CSS, Arduino, VBA Software: STK, Visual Studio, Linux, Xcode, Spyder, Eclipse, MS Office, CATIA, Star CCM Awards: Boeing Company Scholarship, Alumni Club of Denver Scholarship, Dean’s Honor List

Rahul Vohra 22 Courtside Ln, Princeton, NJ 08540 | Cell: 732-735-6560 | [email protected]

Education University of Michigan, Ann Arbor – College of Engineering

Bachelor of Science in Engineering in Aerospace Engineering September 2017 - December 2020

Minor in Computer Science GPA: 3.894 / 4.000

Technical and Leadership Experience SpaceX - Starlink – GNC Vehicle Engineering Intern May – August 2020

x Responsible for ISS collision avoidance; conducted Monte Carlo simulations to ensure constellation does not

conjunct with ISS via waypoint and reverse-precession methods [C++, Python] x Created processes and restructured algorithm functionality to set nominal-burn and collision-avoidance planning

automatically, greatly minimizing required operator overhead on all satellites

x Improved permanent failure sequences and established testing platform to configure satellites for non-nominal

operation; future satellites will be decommissioned via my rework and improvement of these failure sequences

x Conducted various hardware-out-of-the-loop (HOOTL) and hardware-in-the-loop (HITL) software tests to obtain

necessary verification data for implemented changes

Raytheon Missile Systems – Modeling, Simulations, and Analysis Intern May - August 2019

x Developed altitude-return algorithms within GenRF radar simulator, decreasing runtime by 40% in edge cases

x Created a script suite to capture ground effects of radar lobe clutter, increasing accuracy by 20% [C++, MATLAB] x Worked with radar generation and signal processing teams to generalize code functionality across divisions

x Consolidated multiple terrain generation algorithms from legacy models into the updated method

MIT Lincoln Laboratory – Structural and Thermal-Fluids Engineering Intern January – May 2019

x Mustang Laser Communications Satellite Program:

o Created testing fixtures for coarse encoder, FPGA and PCB endurance tests, and motor operation; designed in

SolidWorks, then 3D-printed or machined for assembly and testing

o Tested and analyzed components and provided recommendations to establish nominal behavior tolerances

and environment restrictions on these systems

x Silicate Bonding of Novel Optical Fixtures – Technical Research Initiative:

o Developed and conducted procedures for experimental silicate bonding method to improve strength properties

o Programmed filters to process and analyze desired information from large data sets [C++, MATLAB, Python] Hovercraft Team September – December 2018

x Designed remote-controlled hovercraft in Catia V5 and modelled fluid flows to adapt hovercraft shell [Star-CCM+] x Completed epoxy-resin wet layup using CNC router to create wax mold [g-code] x Coded Arduino controls and signal filters and assisted in wiring and soldering of the electrical subsystem [Arduino] x Created and presented reports and presentations outlining hovercraft’s initial design, simulation results, test data,

and recommended adaptations for Titan at two kilometers at Annual Aerospace Day – 3rd Place

Computer and Programming Experience x Orbital Trajectory Planning for N-body problem: Created physical model from scratch and simulated a rocket gravity

assist to the Moon using 12-element state vectors and gravity relations; uses numerical RK4 method and orbital

mechanics equations to achieve sub-kilometer path accuracy – Orbital mechanics, Hohmann transfers [MATLAB]

x Matrix Method Implementation for n-Sized Truss Systems: Automated analytical solution for force loads and

displacements to model reactive behavior of helicopter truss frames; reads in known displacements and forces, uses

combination of static, constitutive, and compatibility equations to create stiffness matrix, and performs matrix algebra

operations to characterize truss system – Computational solutions of static, arbitrarily large trusses [MATLAB]

x Hadoop MapReduce Framework Emulator: Created MapReduce system to process vast quantities of data on large

clusters; multi-threaded processes to have workers communicate with master over TCP and UDP protocols, and included

heartbeat fault-tolerance for hardware reliability – Asynchronous and multi-threaded computing, Internet communication [Python, HTML, CSS, JavaScript, Flask and React Frameworks]

Honors and Awards x Member of Sigma Gamma Tau Aerospace Honors Society September 2018 - Present

x Rogel Award of Excellence Scholarship (four-year, merit-based scholarship) 2017 - Graduation

Aiden Wharton-Mohammed 411 E. Washington Street, #711A U.S. Citizen Ann Arbor, MI 48104 717-376-8036 [email protected] Education University of Michigan | Ann Arbor, MI | September 2017 - Present

x Aerospace Engineering BSE x Expected Graduation: Spring 2021 x Cumulative GPA: 3.63 x Electives: Fundamentals of Aerospace Computing, Programming and Intro Data Structures, Electrical Circuits,

Aerospace Instrumentation and Measurement, Control of Aerospace Vehicles, Astrodynamics, Matrix Algebra

Technical Skills x Proficient: MATLAB, C/C++, SolidWorks, Microsoft Office, Electrical Circuitry and Instrumentation

(Oscilloscopes, Function Generators, Filters, Amplifiers, Virtual Instruments) x Intermediate: CATIA v5, STAR-CCM+, Simulink

Project Experience Space-Based Solar Power Senior Design Project | September - December 2020

x Demonstrated the feasibility of space-based solar energy collection and energy transfer via laser beam x Designed and prototyped receiving panel and associated circuit used to measure power transmitted by a CW laser x Utilized optics to focus laser light profile, demonstrating that energy can be transferred at extended distances

without considerable efficiency losses due to a lens x Conducted vacuum chamber testing of solar cells, comparing efficiency of panels in a space environment to

existing ground-based systems on Earth Robotic Arm Assembly System | January - December 2020

x Developed a two, 3-DoF arm assembly system and unique truss connection method designed to operate in orbit x End effector designer: designed and modeled 4-bar linkage end effector, facilitating the assembly of truss

structures that can be used as a framework for space-based platforms x Manufactured, assembled, and tested system, proving that it can connect truss segments together using minimal

degrees of freedom x Improved project management and professional communication skills through weekly video conferences with our

project sponsors and advisors at Northrop Grumman and their partner, Made in Space Remote-Controlled Hovercraft Competition | January - April 2019

x Designed an RC hovercraft capable of picking up and transporting payloads over flat surfaces x Designed and manufactured custom impeller and motor mount in CATIA x Utilized 3D printing and laser cutting to rapidly prototype components x Used STAR-CCM+ to simulate internal and external air flow to finalize body design in collaboration with team

CFD Code Optimization for High-Performance Computing | September 2018 - April 2019 x Identified the most time-intensive subroutines in the Scientific Computing and Flow Physics Lab’s Discontinuous

Galerkin CFD code x Implemented efficient linear algebra routines (in C++) in time-intensive procedures within the solver code x Reduced total computational time by up to 20% for 2D simulations with √# 𝑒𝑙𝑒푚𝑒푛푡푠 < 128 and showed how

results can be extrapolated to reduce wall time for more demanding procedures x Gained experience working in a Linux environment while programming in C++ and Python

Work Experience Laboratory Assistant | University of Michigan | Ann Arbor, MI | October 2018 - April 2019

x Prepared, maintained, and documented laboratory equipment in the Spectroscopy and Structural Engineering Labs x Diagnosed and repaired a laboratory centrifuge locking mechanism, saving the department the replacement cost

MINGFEI (DORIS) [email protected] ⇧ Nationality: Canadian ⇧ Interests: Guidance, Navigation and Controls

EDUCATIONUniversity of Michigan, Ann Arbor, MI, US GPA: 4.0 / 4.0 Jan 2020 - Expected April 2021

Master of Science in Engineering in Aerospace Engineering, Focus on Flight Dynamics and Control

University of Toronto, Toronto, ON, Canada GPA: 3.65 / 4.0 Sept 2015 - June 2019

Bachelor of Applied Science in Engineering Science (with Honors)Major in Aerospace Engineering, Minor in Robotics and Mechatronics

Related Coursework: Nonlinear Systems and Control; Multi-agent Systems; Navigation and Guidance of AerospaceVehicles; Spacecraft Dynamics and Control; Inference, Estimation, and Learning; Self-Driving Cars (Coursera)

SKILLSProgramming Languages Python, MATLAB, C, Simulink, Verilog, AssemblyApplications SolidWorks, Machining, Soldering

RESEARCH EXPERIENCEResearch Assistant, Model Predictive Control Laboratory, University of Michigan Oct 2020 - Present

• Developed an output-feedback model predictive control (MPC) with online identification for nonlinear systems

Research Assistant, Computational Autonomy Group, University of Michigan Jan 2020 - Sept 2020

• Proposed an assignment policy via discrete optimal transport theory for linear pursuit-evasion games

Research Assistant, Balloon Astrophysics Group, University of Toronto Feb 2018 - Apr 2019

• Designed and machined the star camera supporting system for pointing reconstruction

• Devised a jig alignment that assistants assembling sunshield within precision error

• Implemented the image stabilization system with 4x higher controllable frequency and accuracy

ENGINEERING PROJECTSControl Member, Space System Design Sept 2018 - Dec 2018

• Proposed a control system for a launch-assemble system for Planetary Orbiting Space Telescope project thatascertains potential landing sites for future mission by delivering a collection of Microsatellitesn

Microcontroller Member, Autonomous Bottle Recycling Robot Jan 2017 - Apr 2017

• Constructed a bottle recycling machine, programmed a PIC18 microcontroller to act as a finite state machine

EXTRACURRICULAR INVOLVEMENTSMechatronics Lead: University of Toronto Chemical Vehicle (UTCV) Apr 2017 - Apr 2019

• Led UTCV mechatronics team to construct a novel light-weight car, design the embedded system and developdata analysis algorithm using machine learning

Programming Director, Undergraduate Engineering Research Day (UnERD) May 2018 - Aug 2018

• Directed abstract marking system and research workshops for UnERD, the largest undergraduate engineeringresearch competition at the University of Toronto.

AWARDS & RECOGNITION• AIAA ASCEND Diversity Scholarship 2020 - 2021

• Specialization on Self-Driving Cars, Coursera Expected Feb 2021

• Sigma Gamma Tau Aerospace Engineering Honor Society Sept 2020 - present

• Dean’s Honour List of Applied Science and Engineering, University of Toronto 2015 - 2019

• Summer Undergraduate Research Fellowship in Astronomy and Astrophysics, Dunlap Institute 2017

• Euclid Contest Top 10%, Canada 2015

Avionics and Controls

Alexander Philpott 303-579-9557 5395 Nassau Circle E [email protected] Englewood, CO 80113

EDUCATION M.S.E., Aerospace Engineering University of Michigan, Ann Arbor, MI GPA: 4.0/4.0 May 2021 B.S.E., Aerospace Engineering, Minor in Physics University of Michigan, Ann Arbor, MI GPA: 4.0/4.0, summa cum laude December 2019 WORK EXPERIENCE SpaceX Hawthorne, CA Associate Engineer – Post Grad, Customer Operations & Integration March 2020—August 2020

• Developed “Deorbit Browser”: Flask/Polymer website for Crew Dragon operators to assist with contingency deorbit site selection, saving 20 minutes of operator time every orbit and integrating sources of truth

• Devised deorbit site selection algorithm to recommend best locations that satisfy geographic and weather rules • Created production and deployment pipeline for Deorbit Browser to automate verification and increase reliability • Released and actively supported Deorbit Browser during critical launch and departure operations for Demo-2

SpaceX Hawthorne, CA Customer Operations & Integration Intern May 2019—August 2019

• Developed set of criteria to define global, preferred regions for emergency Crew Dragon landings • Built Python scripts to generate geospatial representations of preferred deorbit regions for further analysis • Delivered script to create table of deorbit opportunities into preferred regions for astronaut use on-orbit • Designed script to combine similar Crew Dragon alerts for bulk editing, allowing expediated review

DigitalGlobe (Maxar) Westminster, CO Satellite Navigation Systems Intern May 2018—August 2018

• Developed orbit propagator (included semi-major axis, RAAN, and inclination change) to optimize phasing orbits for DigitalGlobe’s next constellation, resulting in delta-V savings of 7.5%

• Built Python software that interfaced with external API, delivering propagations into collision avoidance software and aiding analysis on ~10 high-risk potential collisions per week

• Trailblazed demo cloud-hosted service with Angular (JavaScript) front end and Django (Python) back end • Monitored constellation of 5 satellites for potential collisions with space debris and other satellites

SpaceX Hawthorne, CA Flight Reliability Intern January 2018—May 2018

• Analyzed historical wind data to derive design requirements for pad structures at NASA’s Launch Complex 39A • Developed Python scripts to automate data collection to update failure rates for Crew Dragon risk model

DigitalGlobe (Maxar) Longmont, CO

Satellite Navigation Systems Intern May 2017—August 2017 • Built Perl script to automatically check automated processes, notifying of errors and anomalies sooner than previously • Designed interactive dashboard website to display real-time status of all processes in one place

PROJECT EXPERIENCE Ann Arbor, MI Michigan Aeronautical Science Association (Student Rocket Design Team) 2015—2020

• Co-led team of ~4 students for design, simulation, and manufacture of bell nozzle, utilizing Rao’s Method • Led project with 4 other students to create prototype feedback pressure control system for propellant tanks, using

solenoid and motorized needle valve as actuators • Managed 2018-2019 budget of $150,000, Treasurer from June 2016 to December 2017, June 2018 to May 2019

SKILLS Languages: Python, MATLAB, Perl, C++, Ruby, JavaScript, HTML, CSS, Angular, and Swift Software: Linux, SolidWorks, Ansys, STK, Django, AWS, Flask, Polymer, Docker, Sentry, Bamboo Notable Courses: Astrodynamics, Controls, Navigation and Guidance, Structures, Dynamics Portfolio: http://bit.ly/APportf




















Rahul Vohra 22 Courtside Ln, Princeton, NJ 08540 | Cell: 732-735-6560 | [email protected]

Education University of Michigan, Ann Arbor – College of Engineering

Bachelor of Science in Engineering in Aerospace Engineering September 2017 - December 2020

Minor in Computer Science GPA: 3.894 / 4.000

Technical and Leadership Experience SpaceX - Starlink – GNC Vehicle Engineering Intern May – August 2020

x Responsible for ISS collision avoidance; conducted Monte Carlo simulations to ensure constellation does not

conjunct with ISS via waypoint and reverse-precession methods [C++, Python] x Created processes and restructured algorithm functionality to set nominal-burn and collision-avoidance planning

automatically, greatly minimizing required operator overhead on all satellites

x Improved permanent failure sequences and established testing platform to configure satellites for non-nominal

operation; future satellites will be decommissioned via my rework and improvement of these failure sequences

x Conducted various hardware-out-of-the-loop (HOOTL) and hardware-in-the-loop (HITL) software tests to obtain

necessary verification data for implemented changes

Raytheon Missile Systems – Modeling, Simulations, and Analysis Intern May - August 2019

x Developed altitude-return algorithms within GenRF radar simulator, decreasing runtime by 40% in edge cases

x Created a script suite to capture ground effects of radar lobe clutter, increasing accuracy by 20% [C++, MATLAB] x Worked with radar generation and signal processing teams to generalize code functionality across divisions

x Consolidated multiple terrain generation algorithms from legacy models into the updated method

MIT Lincoln Laboratory – Structural and Thermal-Fluids Engineering Intern January – May 2019

x Mustang Laser Communications Satellite Program:

o Created testing fixtures for coarse encoder, FPGA and PCB endurance tests, and motor operation; designed in

SolidWorks, then 3D-printed or machined for assembly and testing

o Tested and analyzed components and provided recommendations to establish nominal behavior tolerances

and environment restrictions on these systems

x Silicate Bonding of Novel Optical Fixtures – Technical Research Initiative:

o Developed and conducted procedures for experimental silicate bonding method to improve strength properties

o Programmed filters to process and analyze desired information from large data sets [C++, MATLAB, Python] Hovercraft Team September – December 2018

x Designed remote-controlled hovercraft in Catia V5 and modelled fluid flows to adapt hovercraft shell [Star-CCM+] x Completed epoxy-resin wet layup using CNC router to create wax mold [g-code] x Coded Arduino controls and signal filters and assisted in wiring and soldering of the electrical subsystem [Arduino] x Created and presented reports and presentations outlining hovercraft’s initial design, simulation results, test data,

and recommended adaptations for Titan at two kilometers at Annual Aerospace Day – 3rd Place

Computer and Programming Experience x Orbital Trajectory Planning for N-body problem: Created physical model from scratch and simulated a rocket gravity

assist to the Moon using 12-element state vectors and gravity relations; uses numerical RK4 method and orbital

mechanics equations to achieve sub-kilometer path accuracy – Orbital mechanics, Hohmann transfers [MATLAB]

x Matrix Method Implementation for n-Sized Truss Systems: Automated analytical solution for force loads and

displacements to model reactive behavior of helicopter truss frames; reads in known displacements and forces, uses

combination of static, constitutive, and compatibility equations to create stiffness matrix, and performs matrix algebra

operations to characterize truss system – Computational solutions of static, arbitrarily large trusses [MATLAB]

x Hadoop MapReduce Framework Emulator: Created MapReduce system to process vast quantities of data on large

clusters; multi-threaded processes to have workers communicate with master over TCP and UDP protocols, and included

heartbeat fault-tolerance for hardware reliability – Asynchronous and multi-threaded computing, Internet communication [Python, HTML, CSS, JavaScript, Flask and React Frameworks]

Honors and Awards x Member of Sigma Gamma Tau Aerospace Honors Society September 2018 - Present

x Rogel Award of Excellence Scholarship (four-year, merit-based scholarship) 2017 - Graduation

















































Propulsion and Gas Dynamics














Kellyn Clink 8690 Bricker Rd, Yale, MI 48097 [email protected] 810-705-1151

Education University of Michigan – Ann Arbor Aerospace Engineering BSE Graduated May 2020; GPA 3.501/4.0 Space Engineering Masters of Engineering Expected Graduation May 2021; GPA 4.0/4.0

Employment University of Michigan Climate and Space Sciences and Engineering Department: April 2019 – Present; University of Michigan Research Scholars Program: September 2018 – April 2019; University of Michigan Undergraduate Research Opportunity Program Summer Fellowship: May 2018 – July 2018; University of Michigan Undergraduate Research Opportunity Program: September 2017 – April 2018

x Research Assistant o Utilized MatLab skills to analyze data from NASA MESSENGER and MMS missions o Enhanced understanding of the data being analyzed in order to help research run smoothly

University of Michigan Museum of Natural History: May 2017 – October 2017

x Docent o Refined public speaking skills to enhance guest fun and educational experiences o Enhanced improvisation skills to build an efficient environment among guests and other

docents

The University of Michigan’s America Reads: January 2017 – April 2017 x Tutor

o Increased the reading level of elementary children by working with them one-on-one o Improved leadership skills in order to maintain a safe and educational environment

Notre Dame Turbo Laboratory: June – July 2016 x Intern

o Assisted organization of jet engines and machinery in order to create a safe and efficient work environment

Arby’s: February 2014 – May 2016 x Team Member

o Improved team work skills in order to maintain an efficient work environment o Utilized communication skills in order to improve customer satisfaction and reduce food

waste

Skills x Beginner – Intermediate Mathematica skills x Intermediate - Advanced MatLab skills x Beginner STK skills x Experienced public speaker x Extensive teamwork experience

Conference Presentations

x Clink K. E. M., et al., (2018) MMS Observations of Current Sheet Flapping at Earth’s Plasma Sheet, SM23D-3206, 2018 Fall Meeting, American Geophysical Union, Washington D.C.

x Clink K. E. M., et al., (2019) MMS Observations of Current Sheet Flapping at Earth’s Plasma Sheet, 2019 Summer Workshop, Geospace Environment Modeling, Santa Fe, New Mexico


Tanner Dean Baltimore, MD 21210 / (248)-977-7608 / [email protected]

I am a dedicated Senior attending the University of Michigan currently looking for a full-time position focused on propulsion. The whole concept of space has fascinated me for my entire life as I have looked up to the stars. Learning about the wonders and mysteries of the cosmos is a big reason why I’m in the aerospace program today. I want the ability to share my passion with others by providing them with the excitement of space launches, moon landings and hopefully in the future, interplanetary travel. I am really excited about space travel and dream that I can be a part of the next wave of space exploration.

Education University of Michigan - Ann Arbor, MI April 2017 - Present Bachelor of Science in Aerospace Engineering | Minor in Physics GPA: 3.45/4.00

x University Honors awarded at the annual University of Michigan Honors Convocation 2020 Anticipated Graduation: June 2021 Stoney Creek High School - Rochester, MI September 2014 - June 2017

Activities Student Space Systems Fabrication Lab September 2018 – June 2019 CanSat Team

x Member of the mechanical subgroup x Designed and Manufactured a small satellite for the American Astronomical Society’s annual competition x Managed the design of the competition’s focus, an auto-gyro descent mechanism

Hovercraft Competition January 2019 – April 2019

x Designed and built a hovercraft capable of controlled turning and mass pickup for a class competition x Headed the design of the mass pickup system x Coordinated the construction of the structures as well as the turning mechanism for the craft

American Institute of Aeronautics and Astronautics (AIAA) January 2020 - Present Member of the University of Michigan Student Branch Sigma Gamma Tau National Honor Society for Aerospace Engineering January 2020 – Present Member University of Michigan Club Baseball September 2018 – Present

Skills x MATLAB x Python x Working knowledge in C++ x Catia

Work Experience

Panera Bread – Ann Arbor, MI May 2019 – January 2020 Delivery Team

x Prepare and safely deliver meals to customers

Atwaters Bakery & Café - Baltimore, MD May 2018 – August 2018 Bus Boy

x Cleaned tables and washed dishes x Aided the chefs in times of need

Onyx Ice Arena - Rochester, MI December 2015 – August 2017 Lobby Attendant/Skate Guard

x Coordinated with coworkers to ensure the safety of people during public skating x Oversaw the cleanliness of the arena by mopping, sweeping, taking out the trash, and completing the daily needs of opening and closing

Leadership

LDS Church December 2014 – December 2015 President of Teachers Quorum

x Supervised young adults within the church by managing group meetings and providing improvements within the quorum Co-president of Seminary church class September 2014 – June 2017

x Worked with church supervisors to run a four-year church program for high school students x One-hour 6am class that began every weekday throughout all of high school


Structures

Experience

General Atomics Aeronau cal June 2020-August 2020 Process Controls / Environmental Test and Analysis Intern San Diego, CA Developed labor hours estimation calculator for MPEx-specific projects Designed test fixture and procedure for Environmental Stress Screening of a reset switch Managed various vibration, temperature, humidity, and altitude tests Attended 15+ design reviews, taking action items Aurora Flight Sciences: A Boeing Company May 2019-August 2019 Aerostructures Design Engineering Intern Manassas, VA Created and detailed solid models for the airframe fuselage of an aircraft Researched various options for designing landing gear Packaged design review materials Services for Students with Disabili es September 2018-Present Note-taker University of Michigan Attended courses across University of Michigan colleges Subjects include Sociology, Psychology, Chemistry, Biology, Computer Engineering,

Statistics, Communications, Information, International Studies, Mechanical Engineering Shared detailed notes with undergraduate and graduate students Undergraduate Research Program September 2017-May 2019 Student Researcher University of Michigan Compiled information from historical periodicals and production documents Selected and digitized critical documents, images, texts, and audiovisual recordings Composed audiovisual essay detailing the importance of the antiracist and antifascist

ideology behind Orson Welles’ unmade film “Heart of Darkness” Duderstadt Media Center September 2019-May 2020 Student Technician / Media Assistant University of Michigan Provided programmatic, technical and administrative support for audio and video

productions Worked in a fast-paced production atmosphere as a teammate The Fund for the Public Interest April 2018-August 2018 Field Manager & Canvasser Ann Arbor, MI Individually raised over $25,000 for Environment Michigan and The Public Interest

Research Group Managed a team of 20 employees who collectively raised over $300,000 Organiza ons Women in Aeronautics and Astronautics External Vice President—2020 Conference Chair, Founder of the Women in Aerospace Conference—2019 Sigma Gamma Tau Aerospace Engineering Honors Fraternity Treasurer—Fall 2020 M-Agination Films American Institute of Aeronautics and Astronautics

Contact

248.756.1667

[email protected]

linkedin.com/in/rachelbyrum

Educa on

University of Michigan

B.S.E Aerospace Engineering

B.S Film, Television and Media

GPA: 3.097 Grad: Dec. 2021

Technical Skills

CATIA

MATLAB

Excel

Solidworks

Premiere Pro

HTML

C++ & Python

Coursework

Engineering & Mission Readiness of Suborbital Space Payloads

Aerodynamics

Aircraft Dynamics

Aero Laboratory

Propulsion

Structures

Materials and Manufacturing

Gas Dynamics

Rachel Byrum U.S Citizen


















SKILLS





Jan 2018 – Apr 2020

Apr 2019 – Mar 2020

Jun 2020 – Jul 2020

Jun 2016 – Jul 2016

Jun 2019 – Aug 2019













docents







waste





















Systems Engineering

Experience

General Atomics Aeronau cal June 2020-August 2020 Process Controls / Environmental Test and Analysis Intern San Diego, CA Developed labor hours estimation calculator for MPEx-specific projects Designed test fixture and procedure for Environmental Stress Screening of a reset switch Managed various vibration, temperature, humidity, and altitude tests Attended 15+ design reviews, taking action items Aurora Flight Sciences: A Boeing Company May 2019-August 2019 Aerostructures Design Engineering Intern Manassas, VA Created and detailed solid models for the airframe fuselage of an aircraft Researched various options for designing landing gear Packaged design review materials Services for Students with Disabili es September 2018-Present Note-taker University of Michigan Attended courses across University of Michigan colleges Subjects include Sociology, Psychology, Chemistry, Biology, Computer Engineering,

Statistics, Communications, Information, International Studies, Mechanical Engineering Shared detailed notes with undergraduate and graduate students Undergraduate Research Program September 2017-May 2019 Student Researcher University of Michigan Compiled information from historical periodicals and production documents Selected and digitized critical documents, images, texts, and audiovisual recordings Composed audiovisual essay detailing the importance of the antiracist and antifascist

ideology behind Orson Welles’ unmade film “Heart of Darkness” Duderstadt Media Center September 2019-May 2020 Student Technician / Media Assistant University of Michigan Provided programmatic, technical and administrative support for audio and video

productions Worked in a fast-paced production atmosphere as a teammate The Fund for the Public Interest April 2018-August 2018 Field Manager & Canvasser Ann Arbor, MI Individually raised over $25,000 for Environment Michigan and The Public Interest

Research Group Managed a team of 20 employees who collectively raised over $300,000 Organiza ons Women in Aeronautics and Astronautics External Vice President—2020 Conference Chair, Founder of the Women in Aerospace Conference—2019 Sigma Gamma Tau Aerospace Engineering Honors Fraternity Treasurer—Fall 2020 M-Agination Films American Institute of Aeronautics and Astronautics

Contact

248.756.1667

[email protected]

linkedin.com/in/rachelbyrum

Educa on

University of Michigan

B.S.E Aerospace Engineering

B.S Film, Television and Media

GPA: 3.097 Grad: Dec. 2021

Technical Skills

CATIA

MATLAB

Excel

Solidworks

Premiere Pro

HTML

C++ & Python

Coursework

Engineering & Mission Readiness of Suborbital Space Payloads

Aerodynamics

Aircraft Dynamics

Aero Laboratory

Propulsion

Structures

Materials and Manufacturing

Gas Dynamics

Rachel Byrum U.S Citizen































SKILLS





Jan 2018 – Apr 2020

Apr 2019 – Mar 2020

Jun 2020 – Jul 2020

Jun 2016 – Jul 2016

Jun 2019 – Aug 2019













docents







waste








































S E R G I O R A M I R E Z S A B O G A L

5205 Kensington Cir, Coral Springs, FL 33076 • 954.309.3158 • [email protected] •linkedin.com/in/sergio-ramirezs• US Citizen

Education _ University of Michigan Ann Arbor, MI Bachelor of Science in Engineering in Aerospace Engineering May 2021

Honors & Awards: Engineering Dean’s List, University Honors GPA: 3.5/4.0

Skills _ Python (Advanced), MatLab (Advanced), Simulink (Intermediate), C++ (Intermediate), Cameo Systems Modeler (Intermediate),

DOORS NG (Intermediate), MS Suite (Intermediate), ANSYS(Intermediate), StarCCM+ (Basic), English & Spanish (Fluent, Bilingual)

Experience _ Blue Origin Kent, WA Human Landing System, Descent Element Systems Engineering Intern Sept. 2020 – Dec. 2020

x Lead creation and implementation of Descent Element Fluids Budget for propellant allocation and consumables tracking

x Performed fluids consumption and generation analysis over mission duration to identify fluids risks and opportunities

x Verified all fluids allocations to subsystems to ensure propellant load can meet subsystem fluids requirements

x Analyzed surface commodities consumption by astronauts on lunar surface for implementation into HLS documentation

x Generated DE Demo flight test objectives with input from all subsystems for demo mission scope definition

x Supported Descent Element requirements and verification definition and flow down in DOORS Next Generation

x Developed robust mission element sizing outputs for all HLS elements from existing analysis code in Julia

Northrop Grumman Space Systems Dulles, VA (Remote) Human Landing System, Transfer Element Systems Engineering Intern May 2020 – Aug. 2020

x Built and maintained system block diagrams for analysis in Cameo for all HLS Transfer Element physical systems

x Maintained power and mass budgets for HLS Transfer Element

x Implemented MBSE to develop single source of truth for all TE technical budgets through Cameo

x Generated mission timeline for all relevant phases and mission events from transition to vehicle power to disposal from LLO

General Electric Aviation Evendale, OH Aeromechanics Engineering Intern May – Aug 2019

x Developed Python tool to automate fatigue assessment of non-synchronous vibrations through GageMap for GE9x

x Contributed to $150,000 in estimated annual cost savings of engineering time for non-synchronous vibration analysis

x Performed break-in of mistuning analysis tool with high-pressure compressor for next generation advanced combat engine

x Lead tools development for new design methods working with international and US-based tools teams

x Created Aeromechanics test tool to plot engine test data with capability to run on-site for live aeromechanics analysis

Leadership _ Sigma Gamma Tau – National Honor Society in Aerospace Engineering Ann Arbor, MI President Dec 2019 – April 2020

x Lead executive board to aid members in meeting personal, academic, professional, and outreach goals

x Ensured stability and longevity of organization and promote effective communication among executive board

Michigan Vertical Flight Technology Ann Arbor, MI Operations Lead Aug 2019 – Aug 2020

x Lead all operations including scheduling, system integration, sourcing, member retention and budget planning x Created MVFT Industry Advisory Board which includes representatives from Ford, SkySpecs, Hermeus, ASX, and Siemens x Developed course on systems engineering and project development with Prof. George Halow and other student leaders Society of Hispanic Professional Engineers Ann Arbor, MI Secretary April 2019 – April 2020

x Managed communications for organization x Lead Media Team in use of social media, website, and other communication outlets

Additional Involvement _ Sigma Gamma Tau National Honor Society in Aerospace Engineering Jan 2019 – Present Women in Aeronautics and Astronautics Sept 2019 – Present AIAA Student Chapter Jan 2019 – Present

Michigan Archery Club, Treasurer May 2020 – Present

















































This concludes the resume book. For additional information, feel free to reach out to [email protected]. Thank you for your time. We appreciate

your continued partnership.

Documents

Winter 2021 RESUME OOK...Analytical Graphics, Inc. (AGI) May 2020 – Sept 2020 • Completed mission design of a 244-satellite constellation in Systems Tool Kit (STK) for global wildfire