Upload
pro-armor
View
220
Download
3
Tags:
Embed Size (px)
DESCRIPTION
WildCat Door Instructions
Citation preview
ARTIC CAT WILDCAT DOORS (AC12205BL)
INSTALLATION INSTRUCTIONS
WILDCAT Door Installation Instructions, Rev. 1 (06/06/2012)
ruo tisiv esaelp sgninraw dna snoitcurtsni noitallatsni rooD no noitamrofni rehtruf roF[
website WWW.PROARMOR.COM or contact customer service at 1-888-312-7667.]
Pro Armor Door and Net are designed to work together to replace your original equipment nets and/or door. Install both the Pro Armor Door and Pro Armor Net to meet occupant protection standards (ANSI/ROHVA-1 effective model year 2014). Use of nets may help keep you from sticking your arm out of the vehicle during a rollover.
If you have questions about your installation, are unable able to complete installation, or your door is not working correctly contact Pro Armor Customer Service or have an authorized dealer or trained technicians inspect your installation. Pro Armor recommends you do not use your UTV if installation of the Door, Net, and Slam Latch Kit is incomplete.
Pro Armor Door and Net are designed to work with the seat belt and other safety features provided by the manufacturer, along with proper preparation and responsible driving from the driver. Pro Armor recommends you follow all manufacturers instructions when preparing to ride and during operation.
WARNING
Contact us at 1-888-312-7667 or WWW.PROARMOR.COM
PARTS LIST1 BOLT M6 X 1.00 X 30MM BUTTON HEAD BOLT 22 NUT M6 X 1.0 NYLON FLANGED HEX 23 PLAIN WAHER 6MM NARROW 204 BOLT M6 X 1.00 X 30MM HEX HEAD BOLT 45 NUT M6 X 1.0 NYLOC HX ZINC 46 RIGHT SIDE STRIKER BRACKET ASSEMBLY 17 JAM NUT, 5.8"-11, ZINC PLATED 48 SLAM LATCH PIN 29 LEFT SIDE STRIKER BRACKET ASSEMBLY 110 ROTARY LATCH SINGLE CATCH, PASSENGER SIDE 111 ROTARY LATCH SINGLE CATCH DRIVER SIDE 112 KNOB 213 PLAIN WASHER 6MM WIDE (15MM OD) BRIGHT ZINC 1214 BOLT M6 X 1.00 X 16MM BUTTON HEAD BOLT ZINC GR. 8 1215 M6 X 1.0 ACORN HEX NUT ZINC 1216 RIGHT SIDE DOOR 117 LEFT SIDE DOOR 118 RIGHT SIDE DOOR PANEL 119 LEFT SIDE DOOR PANEL 120 LEFT SIDE DOOR NET 121 RIGHT SIDE DOOR NET 1
TOOLS REQUIRED5/8" OPEN END WRENCH10MM OPEN END WRENCH10MM SOCKET WITH RATCHETT30 & T40 TORX WITH RATCHET#4 ALLEN WRENCH10MM OPEN END WRENCH
17
16
19
18
6
9
8
7
15
3
1314
1
2
12
4
43
3
5
10
11
20
21
Removal of Stock door & Safety Nets:
1. Remove driver and passenger seats.
2. Using a T30 Torx and 10mm wrench remove 2 bolts holding upper win-dow net to roll cage. See fig. #1
3. Using a T30 Torx remove 1 bolt holding lower window net to
WILDCAT Door Installation Instructions, Rev. 1 (06/06/2012)
[For further information on Door installation instructions and warnings please visit our website WWW.PROARMOR.COM or contact customer service at 1-888-312-7667.]
interior of the car body. On the interior side of the rockers. See fig. #1
4. With the door closed and latched. Remove the 2 bolts holding
removed, support the rear of the door with 1 hand, and release the seat belt style OEM latch & remove the stock door. See fig #1
Removal of Stock Striker:
1. Remove both bolts holding the stock striker in place using a #4 allen wrench and discard striker. Keep hardware for install of PA Striker
Install of Pro Armor Striker:
1. Use the hardware from the stock striker plate. *Make sure everything
yet!)
2. Once the mount plate is securely in place, insert striker from the
needs to use both supplied jam nuts to sandwich the mount plate be-tween & securely hold the striker in place.
*Make sure jam nuts are
Install of Pro Armor Doors & Slam Latch:
1. Set the door in place with the door chassis tubes. Align the
2.
place with 1 flat washer and 1 nyloc nut for each bolt. Use the 10mm socket with ratchet and the 10mm open end wrench.
3. Shut and latch the door closed. Check alignment of chassis tubes and PA door tubes. Get them as close to parallel as possible (stock chassis tubes can vary slightly). With the door closed, use a 5/8” wrench & lrg. adjustable wrench to adjust the striker so it protrudes approximately
4. smoothly and the proper alignment remains.
Fig. #1 Upper Net Bolts
Lower Net Bolt
Door Hinge Bolts
Striker
Fig. #2
Fig. #3
Align bracket holes
with factory holes
Fig. #4 Slam latch
WILDCAT Door Installation Instructions, Rev. 1 (06/06/2012)
[For further information on Door installation instructions and warnings please visit our website WWW.PROARMOR.COM or contact customer service at 1-888-312-7667.]
Reinstall seats and dou
1. Place door panel on the outside of the door tabs and align the panel so the door tubes are running parallel. See fig. #5
2. Run one bolt through one of the top holes of the panel and through the door panel tab. Put on 1 M6 flat wash-
3. Now repeat step #2 for the other 5 door panel hard-ware.
4.
5. Shut Pro Armor door and admire your great work! See fig. #6
Fig. #5
Align door panel and holes with door frame
Fig. #6
WILDCAT Door Installation Instructions, Rev. 1 (06/06/2012)
[For further information on Door installation instructions and warnings please visit our website WWW.PROARMOR.COM or contact customer service at 1-888-312-7667.]
WILDCAT Door Installation Instructions, Rev. 1 (06/06/2012)
[For further information on NET installation instructions and warnings please visit our website WWW.PROARMOR.COM or contact customer service at 1-888-312-7667.]
1. Stock nets must be removed and Pro Armor doors must be installed
2. Hold PA window net in place and check fitment. The webbing should run close to parallel with the top door tube and parallel with
-pillar. See fig. 1 (keep raised webbing limit strap facing the outside of the vehicle! The strap is located on the
3. -pillar Velcro strap to the lower part of the b-pillar, but just above the cage mount bungs. In
cage. Use the stock/factory hardware that was used for the stock
4. Secure the top Velcro strap to b- -line/concentric with the webbing. Make sure the top strap with the rub-ber is secure and will not slide.
5. There are 3 more Velcro straps to secure the PA net to the top tube on the door. Start with the closest strap to the b-pillar and work your way to the front. Make sure all 3 straps are securely fastened to door tube. The front strap has rubber and needs to be securely fastened to the tube on the front side of the bend on the top door tube. This is to prevent the strap from sliding. See fig. 3
6.
-pillar strap and work your way through all Velcro straps, making sure
Fig.#1
Limit Strap On the outside
B-PILLAR
Fig.#2
Fig.#3
Front Rubber Sided Strap in Front of bend
Standard Straps
PROPER ALIGNMENT
BOTTOM B PILLAR VELCRO STRAP
FACTORY HARDWARE AND EYE-LIT
• Check to be sure that the doors and vehicle frame are correctly aligned. If the doors and frame are not aligned properly, that latch pin and Slam Latch body may not be aligned and the latch pin may not fully engage and/or the door may not close completely. Inspect the doors and check to see that the latch pin and Slam Latch body are aligned properly and that the latch pin fully engages when the door shuts completely before each use.
• All screws and bolts should be tightened. Do not over-torque or bolts and screws may weaken or break.
• Inspect the Slam Latch, pin and parts to see that they are not cracked, bent, corroded, or otherwise damaged. Inspect the pin and latch to check that they are both fully operational. • Have an authorized dealer or trained technician inspect the door alignment and Slam Latch after a collision or in the event of any damage.
• Always wear your seat harness during vehicle use. The doors are not designed to keep you inside the vehicle during collisions, sharp or unexpected movements, inclines, declines, rollovers or rough or extreme riding conditions.
• Off-road riding requires skill and can be dangerous. Always wears all of your protective gear, including helmet, seat harness, protective clothing and other safety items.
• Failure to follow all of these instructions and warnings may result in serious injury or death.
Slam Latch Installation Instructions, Rev. 2 (01/06/2012)
[For further information on Slam Latch installation instructions and warnings please visit our website WWW.PROARMOR.COM or contact customer service at 1-888-312-7667.]
•
•
Improper use of product directions can result in injury to yourself or damage to your vehicle.
Always keep all body parts from reaching outside of moving vehicle. Can result in Injury!