1

WIFISKYWIFISKY Serials of wireless access network card

802 11 b/g 2.4GHz 54Mbps long distance

wireless network card

Product Description

WIFI serials provide wireless lan access equipment

of wireless broadband access in 0~50 indoor. It

works in the 2.4GHz frequency band and comforms

with the standard of IEEE802.11b/g. it adopts the

technique of DSSS/DFDM(orthognal frequency

division), which posses high speed and long

transmission range.It offers a variety of security

mechanisms to assure the secturity of data in public

network , for example, supporting WPA, 802.1x

authentication mechanism MAC access and control,

and WEP encryption.

ISM 2.4GHz IEEE 802.11b/g

DSSS/OFDM technique

Technique

High cost performance

Long distance reception.

Through USB2.0 interface

with 56Mhigh speed

connection,the transmission is 8

times than USB2.1.

Simple design and very

convenient for use.

compatible desktop pc and

USB 1.1 interface of laptop.

compatible

windows98SE,2000,Millennium,

XP,Linux and Win7plug and play

Supporting 64/128/256 bits

WEP encryption.

Supporting TKIP ,WPA,802,1X

security settings

deploying 5DB high gain

antenna.

Specification

Equipment interface

USB 2.0 standard

Wireless network connection

Standard;IEEE 802.11b/g

Frequency range:2400-2484 MHz

Transmission rate:automaticlly up to 11/54Mbps

Emisson type;DSSS/OFDM

Available channel;13 channels

Modulation:64QAM/16QAM/BPSK/QPSK/CCK

Frequency stability:within+

Security:WEP 64/128,802.1xsupport,

Wi-Fi Protected Access(WPA) WPA-PSK,WPA II

Network:TCP/IP,IPX/SPX,NetBEUI

Network architecture

Client card mode

Data modulation type

BPSK,QPSK,CCK and OFDM

Power supply

Input :5V+5%

Size/weight

8.5*2.2*6.3cm

38.5g

Operating environment:

Operating temperature:0~50

Storage temperature:-10~65

Humid range:5%~98%

Warranty

One year warrnty(except human factors damage )

25ppm(in 25%)

Agreement

(Version:v1.1.2009)

Notice

1 Product introduction

2 Security alert

3 Installation steps

3.1 Installation steps for drive and Management procedures

4 Network card management tools

5 Advanced settings

6 Wireless network card technique index

Before you use the wireless network card, please read the article carefully. The

company will not be responsible for any damage of wireless network card ,which

is caused by using the incorrect methods that is not accordance with the

provision of the article.

The article is the product direction, which the company makes for wireless

network card.And the company will try best efforts to assure the reliability and

accrateness of the information that include in the article. But the partial content

or all content of the article has become invalid because of upgrade of the

product or software, the company will not inform again. Please notice the

change of version, and renew it in time.

If you are not clear about the something of the article or the function description

of the product , please contact your supplier directly to solve it .

2

3

3

3

4

5

8

9

2

Thanks for using wireless network card of the company.The user manual will

help you to finish all the installation procedures. The installation should include

the following objects:

Wireless network card

Network card antenna

USB cable

Installation guide

Include management procedures of wireless network card and cd of driver.

Notice: If lack something , please contact dealers.

There is Link pilot lamp on wireless network card. Under the AD-Hoc mode , the

pilot lamp is in a slow flash condition.

In order to assure normal operation, please notice waterproof and prevent other

harmful substances .

Before you install the product , please read the installation guide carefully.

If it appears malfunction, it must be repaired by licensed professionals.

Please do not take apart the product by yourself,or repair it.

Please do not put the product in the humid environment, for example:in the

bathroom.

Please do not expose the product to the sun or the other heat, because the

shell of the equipment and electronic devices will be probably damaged in

this condition.

The following chapter will lead you successfully to install wireless network adapter

Notice:please install the driver at f irst , then insert USB wireless network

card ,finally set the network and share resource.

The following steps is necessary for installing wireless network system.

1. First install a AP and use the architecture of Infrastructure mode.

2. Install the driver procedures of wireless network card using setup CD.

3. Install the hardware of wireless network card ;set communication agreement to

connect network, for example TCP/IP agreement.

3

4

1,Start and enter Windows ;

2.Insert setup CD and execute setup.exe , you will see the following picture that

appear in turn ;

3.Click next and appear the lanuage use of country

4.After choose it , click “next”, appearing the following picture .

Picture-1

Picture-2

5. Click “next”,then click “setup”. Finally , finish the setup picture .

The USB network card of company can use your own management software,

and also can use Windows own management procedures to manage under the

Windows XP. In this chapter, it will introduce USB own management procedures .

In application program ,the user can control all function . The application

program usually will open automatically and will show lcon in the lower

right corner of the screen . If you can not see the lcon , please click beginning

program REALTEK RTL8187 Wireless LAN Driver and Utility REALTEK

RTL8187 Wireless LAN Utility, to open management application program.

If the lcon show , it means the network card do not connect with the AP.

Picture-3

Picture-4.1

There is new pattern in the taskbar

5

In “ General ” item, you can see the signal quality of the network connection

speed and relevant information about IP and SSID. In configuration profile, you

can see the available profile.and also you can select SSID , then compile it .(As

the following picture show)

Picture-4.2

Double-click the icon, then, the following picture will appear.

Picture-4.3

6

In available network, you can search available network SSID all around, After

choose the SSID , click it and add it to the configuration profile, then , it can

connect the network. When you click refresh, you can search new network. the

picture will appear as follows.

Double- click SSID ,then “tyy” will appear (or click corresponding SSID, then

click “ add to profile”

If it has no password, you can directly click “ok”( If it has password, then enter it .)

Picture-4.4

Picture-4.5

7

Click “ok”, it means you has joined the new wireless network. If the AP that you

has connected has been encrypted, you can set up network key in the last item

of network encryption and material encryption. Click Advanced you can set up

for power-saving mode wireless mode coding mode . Click state, you can

see some information about network ,such as network MAC driver procedure

version , and you can set up the operating mode of network through easy

settings, such as : ordinary mode point to point mode base station mode .

Note: If you alter the above settings, and it will cause communication failure to

network card .So we suggest the general users use default settings .

For some routers , SSID broadcasting item do not have hook , then the software

default setting can not search,( including the software default settings of 13

channel) and it needs to alter the advanced settings, which change “Channel

Plan :FCC “ into “ETSI” , and click apply. The picture appears as follows.

8

Picture-5.1

Hardware Compatibility

USB2.0 USB1.1

Operating system Windows 98SE WindowsME

Windows 2000

Windows XP Windows CE Linux

Windows7

Mac OS

Standard regulation

IEEE 802.11b/g wireless local area network standard all main network

standards including TCP/IP,IPX)

Operaing temperature(external):

-20 to50 (operating) -30 to70 (storage)

Maximum humidity:95%Non-liquid

voltage specifications

operating voltage: +5V 5%

Wireless specifications:

Distance:

Indoor: it is up to 35-1000 meters according to the difference of environment.

Out door: it is up to 100-2000 meters according to the difference of environment.

Frequency range :

2.4-2.4835 GHz, Direct sequence Spread Spectrum DSSS/OFDM

Number of Channels : EU coutries: 13 American Canada Taiwan : 11

France: 4 Japan:14

Antenna system: divergent external antenna

Mobility: support communicaton range between the each base

Special specificatoins

Supporting transmisson rate :

54Mbps 11Mbps 5.5Mbps 2Mbps 1Mbps

Matirials encryption:

WEP40/128 802.1 x Suppot Wi-Fi Protected Access(WPA) WPA-PSK

WPAII

Tool software: Management tool software

9