Upload
voduong
View
214
Download
0
Embed Size (px)
Citation preview
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
Applications: Dodge, Chrysler, Plymouth, Ford, GM, Nissan
White Series 3100
Part No. Sizes Part No. Sizes
Part No. Sizes Part No. Sizes
Part No. Sizes Part No. Sizes
Part No. Sizes Part No. Sizes
3100-1 1/4˚3100-2 1/2˚3100-3 3/4˚
3100-4 1˚3100-5 1 1/4˚3100-6 1 1/2˚
Applications: Multiple Audi, Chrysler, Dodge, Plymouth & Volkswagen Models
Blue Series 3600
3600-1 1/4˚3600-2 1/2˚3600-3 3/4˚
3600-4 1˚3600-5 1 1/4˚3600-6 1 1/2˚
Applications: Multiple GM & Toyota Models
Grey Series 4600
4600-1 1/4˚4600-2 1/2˚4600-3 3/4˚
4600-4 1˚4600-5 1 1/4˚4600-6 1 1/2˚
Applications: Multiple GM, Kia Models
Burgundy 5600
5600-1 1/4˚5600-2 1/2˚5600-3 3/4˚
5600-4 1˚5600-5 1 1/4˚5600-6 1 1/2˚
• Our 3100 to 5600 series shims are compatible with the computer software in most oftoday’s aligners.
• Colour coded for quick reference.
• Heavy Duty polymer construction
Rear Full Contact Camber/Toe Shim
17
PARTS
6100 Blue Up to +/- 1 1/2° Audi, Chrysler, Dodge, Plymouth& Volkswagen
6200 White Up to +/- 1 1/2° Dodge, Chrysler, Plymouth, Ford, GM, Nissan
6300 Grey Up to +/- 1 1/2° Multiple GMand Toyota Models
6400 Burgundy Up to +/- 1 1/2° Multiple GM, Kia Models
Part No. Sizes Applications
Exact Fit – part numbers provide a precision fit for all applications. No modification to outer perimeter required as with other shim designs.
Most Accurate – Each shim is fully adjustable forcamber and toe with up to 1008 settings between 1/8° - 1 1/2°
Simplicity – Our 6000 series shims are compatible with the computer software in most of today’s aligner. Colour coded for quick reference.
Consistent, Accurate, Predictable Results – System 6000is simple to use and has virtually infinite adjustment, allowing thetechnician to “Get it Right the First Time, Every Time”.
Heavy Duty Polymer Construction
Rear Full Contact Camber/Toe Shim
18
PARTS
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
Series 6500 Green Size Application
6500 - 1 1/4˚6500 - 2 1/2˚ 6500 - 3 3/4˚
6500 - 4 1˚
Chrysler, Honda, Hyundia, Kia,
Nissan, Pontiac, Scion, Toyota
Chevrolet, Pontiac, Saturn
Chrysler, Dodge, Plymouth, Nissan,
Toyota
6700 - 1 1/4˚
6700 - 2 1/2˚
6700 - 3 3/4˚
6700 - 4 1˚
6800 - 1 1/4˚
6800 - 2 1/2˚
6800 - 3 3/4˚
6800 - 4 1˚
These Camber/Caster front wheel alignment shims install behind the upper inner shaft securingthe upper A-arm to the vehicle frame. For caster only, move shims from front to rear.For camber only, add or remove shims equally.
Universal Type Shim Covers a Range of Bolt Sizes
Series 6700 Black Size Application
Series 6800 Brown Size Application
US-18US-18US-18 Part No. Thickness Pieces per box
US132 1/32" 50
US116 1/16" 50
US018 1/8" 50
Rear Full Contact Camber/Toe Shim
• Our 6500 to 6800 series shims are compatible with the computer software in most of today’s aligners.
• Colour coded for quick reference.
• Heavy Duty polymer construction
19
PARTS
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
75970 – SPACER SET (8)
Make and Model Year
7131 Toe +/-0.10°
7132 Toe +/-0.20°
7133 Toe +/-0.30°
7134 Toe +/-0.40°
7135 Toe +/-0.50°
7141 Camber + 0.25°
7142 Camber + 0.50°
7145 Camber — 0.25°
7146 Camber — 0.50°
7151 Toe +/-0.10°
7152 Toe +/-0.20°
7153 Toe +/-0.30°
7154 Toe +/-0.40°
7155 Toe +/-0.50°
7161 Camber + 0.25°
7162 Camber + 0.50°
7165 Camber — 0.25°
7166 Camber — 0.50°
Buick: Verano 2012 & UpCadillac: ELR 2013 & UpChevrolet: Cruze 2011 & Up Volt 2011 & Up
Chevrolet: Sonic 2012 & Up Aveo 2012 & Up Trax 2013-14Buick: Encore 2013 - 14
This set (4 different sizes – 2 of each) aligns calliper to rotorafter installation of a camber shim. Specifically designed to beused on FWD vehicles with hub mounted rear disc brakes.
GM Rear Toe and Camber Shims
7131 - 7146
7151 - 7166
Direct positive camber change (in +/- .25° increments) and positive or negative toe change (in +/-0.10° increments)is made quickly and accurately with these shims. Combine the correct toe shim with a camber shim to get the exacttoe and camber change that is required. Stack up to two shims.
Rear Adjustment Range:Camber +/-0.50° - Toe +/- 0.50° Required: 1 or 2 per wheel Installation time: .5 hr/side
Rear Adjustment Range:Camber +/-0.50° - Toe +/- 0.50° Required: 1 or 2 per wheel Installation time: .5 hr/side
Part No. Toe Change Part No. Camber Change
Make and Model YearPart No. Toe Change Part No. Camber Change
20
PARTS
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
Part No. Make and Model Year
Ford Focus Rear Camber Shims
VW & Audi Rear Shims
Chrysler:Sebring (Exc. Convertible) 1995-00Sebring (2 door coupe) 2001-06
Dodge:Avenger (FWD, AWD) 1995-00
Eagle:Talon (FWD, AWD) 1995-99
Mitsubishi:
Negative -0.75° to Positve 3°These bolts, brackets and spacers allow for greaterrear camber change on the following applications:
Part No. Camber Change Toe Change Make and Model Year
6900 + .50°6901 + 1.00°6902 - 50°6903 - 1.00°6950 +/- .13°6951 +/- .25°6952 +/- .38°
Audi: 2000 - 2006TT
Volkswagen:Beetle 1999 - 201 1Golf 1999 -2006GTI 1999 -2006Jetta 1999 -2005
• Easy installation• Changes camber 1° positive or negative• Suitable for ABS - equipped vehicles• Full support of rear hub/wheel
• Works in conjunction with factory toe adjuster to accurately set rear angles to desired readings
6600-2 1/2° shim Ford: Focus 2000-126600-4 1° shim Ford: Focus 2000-12 (includes hardware for installation)
Chrysler/Mitsubishi Rear Cam Bolt & Bracket
Make and Model Year Make and Model Year
Make and Model Year
Adjustable Rear Camber/Toe Assembly
Part No. 46-134
Ford: Taurus (Passenger Car) 1996-06Mercury: Sable (Passenger Car) 1996-06
Ford: Taurus Wagon (Passenger Car) 1996-05Mercury: Sable Wagon (Passenger Car) 1996-02
Kit includes: 1 plate, 2 cam boltassemblies and all necessary hardware
Camber up to + or - 2°
Part No. 850
Rear Camber Adjusting Cam Bolts
View From Rear Adjustment Range:
Diamante 2004-05Eclipse 2003-05Galant 2003
Part No. 73620 Adjustment Range:
Make and Model Year
21
PARTS
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
PARTS
Front Adjustment Range:Camber: -.50° to +3.5°Caster: -1.00° to +2.00°
Front Camber/Caster Control Arm
This OE type arm has a screw-type adjuster toeasily and accurately change camber and casterwhile viewing live readings from the alignmentmachine. For stock height or lowered vehicles.Come completely assembled including ball joint,sliding plate, adjustment mechanism, and quiet,factory style, rubber bushings.
Installation time: .7 hr/side
Make and Model Year
Honda: Civic 1996-00
Required: 1 per wheel
Part No. 62010
Rear Adjustment Range:Camber: +/—1.5°
Chrysler/Dodge Rear Camber KitOffset rear bushings to bring rear camber back into spec.
Make and Model Year
Chrysler: 300C 2005 & Up
Pacifica 2004-09
Dodge: Magnum 2005 & Up Charger 2006 & Up Challenger 2009 & Up
Required: 1 per wheel
Part No. 66050
Adjustment Range:Camber: +/- 2.0° Caster: +/-1.5°
Chrysler/Dodge Arm
66040 Applications:
Chrysler: 300C RWD 2005-08 Dodge: Magnum RWD 2005-08 Charger RWD 2006-08 Challenger 2006-08 66045 Applications:
Chrysler: 300C RWD 2009 & Up Dodge: Charger RWD 2009 & Up Challenger 2009 & Up
Required: 1 per wheel Installation time: .6 hr/side
Part No. 66040/66045
This adjustable front arm fits these popular Dodge and Chrysler vehicles and provides both camber and caster changes. Easy to install and even easier to adjust this is the perfect kit for standard alignment issues as well as special suspension tuning problems that occur when you lower these vehicles for performance or appearance. Our tubular design incorporates our low-profile adjustable ball joint
Chrysler/Dodge ArmThis fully adjustable arm provides rear camber changes of +/- 2.50°
Rear Adjustment Range:Camber: +/- 2.50°
Applications:
Chrysler: Sebring 2007- 10Dodge: Avenger 2008 - 10 Journey 2009 - 10
Required: 1 per wheel Installation Time: .5 hr/side
Part No. 67015
22
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
Adjustment Range:-2.0° to +3.0°
Acura/Honda Rear Camber ArmMake and Model Year
Acura:Integra 1990-01
Honda:Civic 1988-00CRV 1997-01CR-X 1988-92Del Sol 1988-97
Part No. 3892/67030
Rear Adjustment Range:Camber -/+4°
Part No. 67018
Adjustment Range:-2.0° to +3.0°
Acura/Honda Rear Camber Arm
Make and Model Year
Acura:RSX 2001-091.7 EL 2001-05
Honda:Civic 2001-05
Part No. 3897/67230
Adjustment Range: -2.0° to +4.0°
Make and Model Year
Acura:3.2CL 20013.2TL 1999-033.5RL 1996-08
Honda:Accord 1998-02
Make and Model Year
Acura:TL 2004-08
Part No. 67090 Part No. 67095
Honda/acura Rear Adjustment ArmFor many Hondas and Acura’s, these arms have an O.E. style ball joint integratedinto a complete arm assembly and they have a full 6° range of rear camber changewith our turn buckle adjustment system.
This fully adjustable trailing link provides +/- 4 (degree sign) camber change for the rearof the Chrysler and Dodge models. The simple to install ”remove and replace” kit providesa lifetime of adjustability to maximize tire life and dial in handling.
Required: 1 per wheel Installation Time: .5 hr/side
Make and Model Year
Chrysler: 200 201 1 & Up
Dodge: Avenger 201 1 & Up Journey 201 1 & Up
Required: 1 per wheel Installation time: .5 hr/side
Chrysler/Dodge Camber Arm
23
PARTS
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
PARTS
Adjustment Range: -2.0° to +4.0°
Make and Model Year
Acura: MDX 2001–06 TSX 2004–08
Honda: Accord 2003–07 Odyssey 1999–04 Pilot 2003–08
Part No. 67290
Honda/Acura ArmThese rear arms are for Accords, Pilots and more. An OE ball joint is integratedinto this arm. Perfect for stock height and lowered vehicles.
Required: 1 per wheel Installation Time: .5 hr/side
Adjustment Range:Camber: +/- 2degreeToe: +/- 2degree
Make and Model YearHyundai: Elantra 2007 - 1 0
Kia: Magentis 2007 - 1 0
Rondo 2007 - 1 0
Part No. 67410
Required: 1 per wheel Installation Time: .5 hr/side
Hyundai /Kia Rear ArmThese adjustable rear upper control arm and toe cam kits, for many Hyundai and Kia models, will provide up to +/- 2° camber and +/- 2° toe change.
Adjustment Range:
Camber: -1.5° to +5.0°
Make and Model Year
Ford: Focus 2000 & Up
Mazda: Mazda3 2004 & Up Mazda5 2006 & Up Volvo: S40, V50 2004 & Up C30 2007 & Up C70 2006 & Up
Part No. 67420
Required: 1 per wheel Installation Time: .5 hr/side
Focus, Mazda3 Volvo Forged Rear Camber ArmThese high strength forged rear arms are perfect for tuners orinstallers that need extended camber ranges on these popular platforms. Complete with OE style bushings installed for a factory type ride.
Rear Adjustment Range:Camber: +/-4°
Escape/Tribute Rear Camber Arm
Correct camber on previously non-adjustablesuspensions with this adjustable control arm.The remove and replace design makes the armideal for quick and easy alignment adjustmentas well as simple chassis part replacement. The adjustable arm has an easy to access turnbuckle design that adjusts camber +/- 2°, stock toe adjustments can then be used to complete the adjustment.
Installation time: .8 hr/side
Make and Model Year
Ford:Escape 4WD & RWD 2001 - 1 1
Mazda:Tribute 4WD & RWD 2001 - 12
Required: 1 per wheel
Part No. 67285
24
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
Rear Adjustment Range:
Camber -2.0° to +4.0°
Make and Model Year
Dodge: Caliber (AWD & FWD) 2007 & Up
Jeep: Compass (AWD & FWD) 2007 - 1 1 Patriot (AWD & FWD) 2007 - 1 1
Mitsubishi: Lancer AWD 2009 & Up
Part No. 67455
Dodge/Jeep Rear Camber ArmThe new fully adjustable camber arm for Dodge Caliber/Jeep Compass and Patriot replacesthe nonadjustable stock arm. Camber is now adjustable for a range of +/- 2° with our unique,easy to adjust patent-pending cam adjuster.
Required: 1 per wheel Installation Time: .5 hr/side
Make and Model Year
Honda: Civic 2006 & Up Part No. 67465
Required: 1 per wheel Installation Time: .8 hr/side
Make and Model YearPart No. 67545
Required: 1 per wheel Installation Time: .3 hr/side
Civic Rear Camber BracketThis rear bracket and bushing replaces the stock mount on’06 and upHonda Civics. By rotating the eccentric bolt/cam assembly in the bracketyou can get +/- 1.25° of change. If more change is needed check out our#67470 rear arm.
Acura: TSX 2009 & Up
Honda: Accord 2008 & Up
Accord/TSX Rear Camber Arm The Honda Accord and Acura TSX adjustable rear camber armallows camber change of up to +/-1degree.
Make and Model Year
Honda: Civic, Civic SI, 2006 & Up
Civic Hybrid
Acura: CSX 2006 & Up
Part No. 67470
Required: 1 per wheel Installation Time: .5 hr/side
Honda Civic Camber ArmThis remove and replace rear control arm for the 2006 and upHonda Civic offers +/- 3.0° camber change. Forged with aircraftstrength aluminum the arm is strong and functional with minimumweight. The double sleeve adjuster is easy to access and allowsfor on-car adjustment.
25
PARTS
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
Toe: +/- 1.0°
Part No. 67555
Accord/TSX Rear Toe ArmThe Honda Accord and Acura TSX rear adjustable toe arm is an idealreplacement for a damaged OE toe arm. Additionally, it provides addedtoe change beyond what the OE toe cam offers.
Required: 1 per wheel Installation Time: .3 hr/side
Adjustment Range:Camber -2.0° to +4.0°
Make and Model Year
Honda: Pilot 2009 & Up
Acura: MDX 2007 - 13
Make and Model Year
Honda: Odyssey 2005 & Up
Part No. 67570
Adjustment Range:Camber -2.0° to +4.0°
Part No. 67590
Required: 1 per wheel Installation Time: .5 hr/side
Honda Rear Camber ArmsThese adjustable rear upper control arms, for the 2009 & up Honda Pilot, delivers6° of camber change. The adjustable arm has OE style ball joint and bushing makingit an ideal piece for both collision repair and traditional wheel alignment needs.
Make and Model Year
Acura: TSX 2009 & Up
Honda: Accord 2008 & Up
Honda CR-V Rear ArmThese arms fit popular CR-Vs and Elements. By removing the stock upper rear control arm and replacing it with the adjustable arm you can adjust camber either positive or negative with the turnbuckle adjuster. This arm can be used on vehicles with stock ride height or vehicles that have been altered for performance.
Adjustment Range:Camber: -2.0° to +4.0°
Make and Model Year
Honda: CR-V 2007 - 11
Adjustment Range:Camber: -2.0° to +4.0°
Make and Model YearHonda: CR-V 2002-06 Element 2003 - 1 1
Part No. 67430
Part No. 67580
Required: 1 per wheel Installation Time: .5 hr/side
26
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
PARTS
PARTS
Part No. 72130
Required: 1 per axle Installation Time: .6 hr/side
370Z & G37 Front Upper Control Arms (PR)This pair of front upper control arms will give you +/- 1° caster and +/- 2.5°camber change. These arms feature our SpecRide™ Jounce Spacers for aquieter, OEM style ride.
Make and Model Year
Infiniti: EX35 2008 & Up
G35/G35x Sedan (inc. active steer) 2007-08
G37 Coupe (inc. active steer) 2008 & Up
G37 Sedan 2009 & Up
Nissan: 370Z 2009 & Up
Required: 1 per axle Installation Time: .8 hr/side
4WD & RWD TOYOTA FRONT UPPER ARMSMany Toyota trucks and SUVs run out of factory adjustmentwhen you install lift kits. With our patented design this uppercontrol arm provides an additional +/-2° of camber and0°to +4° of caster change. Built with an OE style ball jointand new SpecRide™ bushings this arm is designed to correctalignment angles while maintainingfactory ride quality.
Front Adjustment Range:Camber -1.5° to +3.5°Caster +/- 1.0°
Part No. 72125
Required: 1 per axle Installation Time: 1.8 hr/side
350Z & G35 Front Upper Control Arms (PR) SPC Perfomance arm/shim kit is the only one the market to provide a substantialamount of positive camber change. The hub and caliper shims extend out the centerof the wheel making it possible for our CNC fabricated arm to make up to 5° totalcamber change and +/- 1° of caster change. The kit includes everything you need,including the ABS sensor bracket, shims, and arms for both sides of the vehicle.
Make and Model Year
Infiniti: G35 Coupe (with and w/o active steer) 2003-07
G35 Sedan 2003-06
Nissan: 350Z 2002-08
Part No. 25460 Make and Model Year Toyota: Tacoma 4WD 1995-04 Tacoma PreRunner RWD 1998-04 4-Runner 4WD & RWD 1996-02
Part No. 25470 Make and Model Year
Toyota: Tacoma 4WD 2005 & Up Tacoma PreRunner RWD 2005 & Up
Part No. 25480 Make and Model Year
Lexus: GX AWD 2003 & Up
Toyota: FJ Cruiser 4WD & RWD 2007 & Up 4Runner 2003 & Up
Part No. 25490 Make and Model Year
Toyota: Tundra 4WD & RWD 2007 & Up Sequoia 2008 & Up
Front Adjustment Range:Camber +/- 2.5°Caster +/- 1.0°
Front Adjustment Range:Camber +/-2° Caster 0° to +4.0°
27
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
Fast Cam Camber Kits
Camber-Kwik Change Gauge
The FASTCAM for domestic & import vehicles with two bolt struts. This unique design allows both positive and negativecamber changes up to 1°. The EASY TO USE adjuster eliminates slotting or modifications of any kind.
Part No. 2300
Note: A magnetic camber gauge, like our2300 can save time by helping you set the adjustmentbefore you reinstall alignment machine heads
No Slotting • Fast And Simple • Inventory Saver
Kit includes: Two Fastcam bolts, nuts & washers
Part No. Application
3540 FC For replacement of 10mm O.E. Bolts3541 FC For replacement of 12mm O.E. Bolts3542 FC For replacement of 14mm O.E. Bolts 3543 FC For replacement of 15mm O.E. Bolts3544 FC For replacement of 16mm O.E. Bolts3545 FC For replacement of 17mm O.E. Bolts
28
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
PARTS
Adjustment Range:Camber 1 1/2° Caster 2°
Make and Model Year
Lincoln: “LS” 2000 - 06
Jaguar: “S Type” 2000 - 08
Ford: Thunderbird 2000 - 06
Part No. 8244
Front Camber Caster Cambolt KitThis kit replaces the plain factory bolts with cam boltsto allow accurate adjustment of camber and caster.
Kit Contains: 1-Four bolt kit will adjust both sides
Rear Adjustment Range:Camber +/- 3.0° Toe +/- 3.0°
Rear Adjustment Range:Camber +/- 3.0° Toe +/- 3.0°
Make and Model Year
Nissan: 350Z 2002-08
Altima 2002-06
Infiniti: G35 Coupe 2003-07
G35 Sedan 2003-06
Make and Model Year
Nissan: 370Z 2009 & Up
Infiniti: G37 Coupe incl. active steer 2008 & Up
G37 Sedan, 2009 & Up
M35/45 2006 & Up
G35 Coupe w/rear active steer 2006-07
G35/35x Sedan incl. active steer 2007-08
Part No. 72055
Part No. 72265
Nissan /Infiniti Rear Camber/Toe KitThese cams (set of 2) replace the OE camber and toe adjustment cams and provide additionalcamber & toe changes. Adjustment slots will need to be elongated using 7-4511 rotary fileor equivalent.
Required: 1 kit per wheel Installation time:.6 hr/side
Part No. 28840 Make and Model Year
Chrysler: Crossfire 2003-07
Mercedes: C Class (W202) 1994-00 C Class (W203) 2001-07 E Class (W210) 1996-02 E Class (W124) 1986-95 CLK Class (W208) 1998-02 CLK Class (W209) 2003-08 SL Class (R129) 1999-02 SLK Class (R170, R171) 1997& Up
Required: 1 per wheel Installation Time: .6 hr/side
Chrysler & Mercedes C/E Class Rear BushingsThese adjustable bushings make rear camber change possible for the Chrysler Crossfire and many Mercedes vehicles. By replacing the outer bushing in the two rear upper control arms, you achieve up to +/- 1.25° of change.
Camber: +/- 1.25°
29
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
PARTS
PARTS
For New Design Ford Taurus, Mercury Sable and Ford Windstar Van
Ford Focus Front Camber Plate
This all new adjustable design increases camberin .25 degree increments up to 1.25 degrees
New Easy-to install design features:• Up to 1.25 degree positive adjustment
• Accurate adjustments in - degree increments - no guess work
• One part number fits either side of vehicle
• All new design installs in just minutes
• Adjustable for future alignments
• Helps restore original ride height
** Installation requires both kits to be installed to maintain ride height side to side
41-4607
41-4609
Ford: Taurus (passenger car & station wagon) 1996 - 06 (front)
Ford: Winstar Van 1995 - 03 Freestar 2004 - 07
Mercury: Sable (passenger car & station wagon) 1996 - 02 (front)
Includes 2 platesand all necessaryhardware per pkg.
Includes 2 platesand all necessaryhardware per pkg.
41-4611
One kit per vehicle (2 plates)(includes hardware for installation)
• Up to 1 degree positive or negative adjustment
• Accurate adjustment in - degree increments - no guess work
• Installs in minutes
• Adjustable for future alignments
** Installation requires both kits to be installedto maintain ride height side to side
Part No. Description Make and Model Year
Part No. Make and Model Year
Ford: Focus 2000-11
30
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
PARTS
Make and Model Year
Audi: TT FWD/AWD 2000-06
Volkswagen: Beetle 1999 & up
Golf, GTi (A4) 1999-06
Golf R32, 2004-06
Jetta (A4) 1999-05
Part No. 81340
VW/Audi Front Camber/Caster Kit
Adjust both camber and caster with this new kit on current modelVolkswagens and Audis. Simply remove the strut assembly, compress the spring and replace the O.E. upper bearing platewith this adjustable plate assembly.
Required: 1 kit per wheel Installation time: .9hr/side
Audi and VW Front Upper Multi Link Arm SetThis set of adjustable upper control arms will allow+/- 1.5°
camber and/or caster change on a wide range of Audi and
VW models. Engineered for both street and track use, forged
6061-T6 aluminum ends with large 18mm threaded adjuster
links assure this is the strongest kit available. Maintenance
free ball joints and bushings provide factory ride, handling,
and NVH performance.
Front Adjustment Range:
Camber +/- 1.50°
Caster +/-1.50°
Part No. 81350 Make and Model Year
Audi: A6/Allroad/RS6 1998-04 A4 1998-08 S4 2000-08 A5/S5, RS4 2007-08 Volkswagen: Passat 1996-05
Part No. 81360 Make and Model Year
Front Adjustment Range: Audi: A4, S4, S5 2009 & UpCamber +/- 1.50° Caster +/-1.50°Required: 1 kit per wheel Installation time: .7hr/side
31
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
PARTS
Camber/Caster Adjustable Upper Ball JointThese ball joints provide a fast, easy and adjustable solution to the problem of non-adjustable front suspensionsfound on many of today’s most popular vehicles..
Adjustable Ball Joint - CamberBy replacing the factory ball joint, this sliding ball joint allows for greater changesthan previously available.
Part No. Adjustment Range Make and Model
41-230 Upper +/-1.0° Chrysler / Dodge: many models,41-232 Lower +/- .75° see application guide, for specific vehicle
41-530 +/-1.0° Honda / Acura: many models,41-532 +/-1.0° see application guide, for specific vehicle
• Fully adjustable design allows for most combinations of camber and caster
• Unique design allows fast and easy “on-vehicle” replacement
Part No. Adjustment Range Make and Model
67190 / 67195 +/-1.5° Hyundai /Kia: many models, see application guide, for specific vehicle
Camber Adjusting Control Arm Mounts
Part No. Adjustment Range Make and Model
3573 +1.25° to +3.0° Honda / Acura: many models,see application guide, for specific vehicle
Fusion Ball Joint
Part No. Adjustment Range Make and Model Year
67115 Camber -1.5° to +1.5° Ford: Fusion 2006 – 12
Lincoln: Zephyr 2006
MKZ 2007 – 12
Mazda: Mazda6 2003-08
• Makes non-adjustable vehicles fully adjustable for camber and caster
• Future adjustments are easily made
32
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
560-0560-D560-E560-F560-G
0°1/2°3/4°1°1 1/2°
0°3/8°1/2°3/4°1°
Part No. Total Change 2 WD Total Change 4 WD
433-O 0°433-F 1°433-G 1 1/2°
433-H 2°433-J 2 1/2°433-K 2 3/4°
Part No. Total Change Part No. Total Change
560-H560-J560-K560-L
1 1/2°2°2 1/2°3°
Part No. Total Change 2 WD Total Change 4 WD
2°2 1/2°3°3 1/2°
560 Series - Ford & Mazda Camber/Caster Adjustment Bushings
433 Series - Ford & Dodge Camber/Caster Adjustment Bushings
Make and Model Year
Ford: E-150/250/350 Econoline Van 1992- 13
Excursion RWD 2000-05
Explorer 2 W/D & 4 W/D 1990-94
Ranger 4 W/D 1990-97
Bronco II 2 W/D & 4 W/D 1989-90
F-150/F250/F350 2 W/D 1990-96
F250/350 Super Duty 2 W/D 1998-04
Mazda: Navajo 2 W/D & 4 W/D 1991-97
2 W/D & 4 W/D Pickup 1991-94
Make and Model Year
Ford: Excursion 4WD 2000-05
F-150 & F-250 4 W/D Pickups 1980-96
F-350 4 W/D Pickups 1980-96
F-250/350/450/550 Super Duty 1998-05
Dodge: Ram HD 2500 & 3500 Pickup 1994-99
33
PARTS
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
PARTS
Tech Tip: Some Ford trucks come from the factory with anoffset bushing already installed. Not all these bushingsare clearly marked. By installing a 0° bushing first,you eliminate math errors when calculating the properadjustment needed.
Adjustable Light Truck BushingsThese double acting, fully adjustable bushings are capable of adjustments up to 2 3/4° both positive and negative.
532 - Ford & Dodge Camber/Caster Bushing
535 - Ford Camber/Caster Adjustment Bushing
Part No. 594
raeY ledoM dna ekaM
2-1 3991 naV enilonocE 053/052/051-E
49-0991 D/W 4 & D/W 2 rerolpxE
79-0991 D/W 4 regnaR
09-9891 D/W 4 & D/W 2 II ocnorB
69-0991 D/W 2 053F/052F/051-F droF
Ford F250/350/450 Super Duty 2 W/D 1998-04
49-1991 D/W 4 & D/W 2 ojavaN adzaM
Mazda 2 W/D & 4 W/D Pickup 1991-97
594 - Ford & MazdaCamber/Caster Adjustment Bushing
Part No. 532
raeY ledoM dna ekaM
69-0891 spukciP D/W 4 052-F & 051-F
69-0891 spukciP D/W 4 053-F
F-250/350 Super Duty 4 W/D 1998-05
69-0891 D/W 4 eziS lluF ocnorB droF
Dodge Ram HD 2500 & 3500 Pickup 1994-99
Part No. 535
raeY ledoM dna ekaM
98-5891 II ocnorB droF
19-3891 4X4 regnaR droF
PARTS
34
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
800-D .25°800-E .50°800-F .75°800-G 1.0°800-H 1.25°800-J 1.50°
800-K 1.75°800-L 2.0°800-M 2.25°800-N 2.50°800-O 0°
800 Series - Ford Camber/Caster Adjustment Bushings
820-D .25°820-E .50°820-F .75°820-G 1.0°820-H 1.25°
820-J 1.50°820-K 1.75°820-L 2.0°820-O 0°
Part No. Total Change Part No. Total Change
820 Series - Ford Camber/Caster Adjustment Bushings
Make and Model Year
Ford: F450, F550 4X4 & 4X2 2005 & Up
Chevy/GMC: 4X4 Kodiak 4500, Topkick 5500 2005 & Up
Front Adjustment Range
Camber/Caster +/-0.25° to +/-2.0°
Part No. Total Change Part No. Total Change
Make and Model Year
Ford: F250 & F350 Super Duty 4X4 2005 & UP
Front Adjustment Range
Camber/Caster up to 2.5°
Adjustable Ford Truck Bushings These double acting, fully adjustable bushings are capable of adjustmentsup to 2 3/4° both positive and negative.
Only one bushing is required for all adjustments.
Part No. 820 Adjustable Bushing egnaR tnemtsujdA raeY ledoM dna ekaM
Ford F450 & F550 4X4 4X2 2005-2006 0 to +/-2.5
Part No. 800 Adjustable Bushing
egnaR tnemtsujdA raeY ledoM dna ekaM
Ford F250 & F350 4X4 2005-2006 0 to +/-2.5
35
PARTS
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
44-2490/91/92/94 - Camber/Caster Adjustable Ball Joints
44-2493 & 44-2495 - Camber/Caster Adjustable Ball Joints
Part No. Adj. Range Make and Model Year
44-2490 +/- 1.75° JEEP: Cherokee/Wagoneer (downsize) 1984-01 Lower Ball Joint Comanche 1986-92 Grand Cherokee 1993-98 Wrangler 1987-95 Wrangler TJ 1996-06 Wrangler JK 2007-11
Part No. Adj. Range Make and Model Year
44-2491 +/- 1.75° JEEP: Grand Cherokee 1999-04 Lower Ball Joint
Part No. Adj. Range Make and Model Year
44-2492 +/- 1.75° Dodge: 1/2, 3/4 & 1 Ton 4WD Pickup 1994-99 Lower Ball Joint & Ram Charger
Part No. Adj. Range Make and Model Year
44-2494 +/- 1.75° Dodge: Ram 1500 2000-01 Lower Ball Joint
These ball joints provide a fast, easy and adjustable solution to the problem of non-adjustable frontsuspensions found on many of today’s most popular vehicles.
• Fully adjustable design allows for most combinations of camber and caster
• Unique design allows fast and easy “on-vehicle” replacement
• Makes non-adjustable vehicles fully adjustable for camber and caster
• Future adjustments are easily made
Part No. Adj. Range Make and Model Year
44-2493 +/- 1.0° JEEP: Commander 2006-10Upper Ball Joint Grand Cherokee 2005-10
Part No. Adj. Range Make and Model Year
44-2495 +/- 1.0° JEEP: Grand Cherokee 201 1
Upper Ball Joint Dodge: Durango 201 1
36
PARTS
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
PARTS
23940 - Camber or Caster Adjustable Ball Joints
Part No. Adj. Range Make and Model Year
23940 Camber +/- 2.25° Dodge: Ram 1500 4WD / RWD 2006 & up or Caster +/- 2.25°
Required: 1 per wheel Installation time: .6 hr/side
Part No. Make and Model ` Year
44-2509 Chevrolet & GMC: 1/2 ton 4X4 and 4X2 1999 & upSolid Forged Arm
4 per package (Does one vehicle) Installation time: .6 hr/side
Part No. Make and Model Year
44-2510 Chevrolet & GMC: 3/4 ton & 1 ton 4X4 and 4X2 1999 & upStamped Arm
4 per package (Does one vehicle) Installation time: .6 hr/side
44-2509/10 Chevrolet & GMC Truck Offset Camber Bushings• 1+ degree additional camber
• O.E. style design - does not efect ride or handling
• Allow use of O.E. adjusters to fine tune settings
• Fast, simple installation w/use of special bushing adapter set no. 7-7950A
(see page TBD)
• Only effective means of reclaiming lost camber
44-2496 & 44-2497 - Camber/Caster Adjustable Ball Joints
Part No. Adj. Range Make and Model Year
44-2496 +/- 1.0° Dodge: Ram 2500/3500 4WD 2000-02
Upper Ball Joint Dodge: Ram 2500/3500 4WD 2003-05 (old body style)
Part No. Adj. Range Make and Model Year
44-2497 +/- 1.0° Dodge: Ram 2500/3500 4WD 2003-11
Upper Ball Joint
37
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
296/87385 - F150/F250 (L/D) Camber/Caster Kit (4)
296
Required: 1 kit per axle Installation time: .4 hr/side
Use this kit to change caster and/or camber on these vehicles. Simplyreplace the existing upper control arm mounting bolts with these cambolts for caster/camber changes up to 2.0°
288 - Camber/Caster
GM: 4x4 and 4x2 GM Trucks 1982-06 Tech Tip: Beginning with mid/late
1990 models GM has a knockout area which has not been removed. The perforated area needs to be removed from the inside, not the outside. Use part no. 2288 on page TBD to pull the plug through the hole leaving a slot.
Part No Adj. Range Make and Model Year
Part No Adj. Range Make and Model Year
290
305
2°(Set of 4)
288(Set of 4)
Ford: Explorer 1995-01
Explorer Sports Trac 2001-06
Ranger 2001-1 1
290 - Truck Cam BoltsReplaces factory non-adjustable system found on some 1997& newer Ford F-150 Expedition and Lincoln Navigator
Camber/Caster+ or – 2 °
Camber/Caster+ /– 2 °
Part No. Adj. Range Make and Model Year
Ford: F150, F250(L/D) (RWD & 4WD) 1997 – 03 Expedition 1997 - 02 F150 Heritage 2004
Lincoln: Navigator (RWD & 4WD) 1997 - 02 Blackwood EXT RWD/4WD 2002 – 03
305 Kit - Ford Expedition/Lincoln Navigator Front Camber/caster Cam Bolt Kit
Required: 1 kit adjusts both sides
Make accurate and easy adjustment to camber and caster. Allows for future adjustments.
Camber +/ – 2 °Caster +/-1.5°
Part No. Adj. Range Make and Model Year
Ford: Expedition 2WD/4WD 2007-11 F150 2WD/4WD 2009-11
Lincoln: Navigator 2WD/4WD 2006-11
38
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
PARTS
PARTS
This Kit replaces the bolt on the upper control armwith a new bolt, cam, and adjusting plate.
• Easy Adjustability
• Allows for future adjustments
Full Kit Adjusts Both Sides
Part No Adj. Range Make and Model Year
299 Camber 2-3/4°
This kit replaces the original lower control armbolt with a new bolt, cam, and adjusting plate.
• Easy Adjustability
• Allows for future adjustments
Full Kit Adjusts Both Sides
301 Camber 2°Caster 1-1/2°
Ford: 150 4X2 & 4X4 2004 - Newer
Lincoln: Mark LT RWD/4WD 2006-09
This Kit replaces the original control arm bolts with a new bolt,cam, adjusting guides and hardware.
• Easy Adjustability
• Allows for future adjustment
Full Kit Adjusts Both Sides(Kit contains: 4 bolts, 4 guides and all the required hardware)
301 - Ford F150 Front Camber/Caster Kit 2004 & Newer
299 - Ford Expedition/Navigator Rear Camber Kit
300 - Ford Expedition/Navigator Front Camber/Caster Kit
300 Camber 2°Caster 1-1/2°
Ford:Expedition/Navigator 4X2 & 4X4 2003-06
Ford:Expedition/Navigator 4X2 & 4X4 2003-06
Part No Adj. Range Make and Model Year
Part No Adj. Range Make and Model Year
39
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
This kit replaces OE alignment washers onthe upper control arms. Rotating the camnuts adjusts camber and caster to obtainthe proper readings.
• Easy Adjustability
• Allows for future adjustments
Full Kit Adjusts Both Sides
Full Kit Adjusts Both Sides
This kit replaces the upper control arm mounting bolts.
• Precise easily controlled adjustments
• Fast “bolt-on” installation: no drilling or modifying required
• Allows for future adjustments
Full Kit Adjusts Both Sides
Part No Adj. Range Make and Model Year
304
Part No Adj. Range Make and Model Year
302 Camber 3/4°
Caster 1-1/4°
Ford:Explorer 2003 - 05Aviator 2003 - 05
This kit replaces OE alignment washers on theupper control arms. Rotating the cam nuts adjustscamber and caster to obtain the proper readings.
• Easy Adjustability
• Allows for future adjustments
303 Camber 1/2°
302 - Ford Explorer/Aviator Front Camber/Caster Kit
303 - Ford Explorer/Aviator Rear Camber Kit
304 - Dodge 4X2 & 4X4 Front Camber/Caster Bolt & Plate
Part No Adj. Range Make and Model YearFord:Explorer 2003 - 05Aviator 2002 - 1 1
Dodge:Ram 1500 4X4 & 4X2 2002 - 05
Camber +/- 1.0°Caster +/- 1-1/2°
40
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
PARTS
Required: 1 kit per wheel Installation time: .8 hr/side
Part No Adjustment Range Make and Model Year
87365 Front Camber +/-2.5°
Ford: Crown Victoria/Fleet 2003-1 1
Lincoln: Town Car 2003-1 1
Mercury: Grand Marquis 2003-1 1 Marauder 2003-04
Required: 1 kit per wheel Installation time: .3 hr/side
Part No Adjustment Range Make and Model Year
86375 Front Camber/Caster +/-1.5°
Chev/GMC (RWD & 4WD):Avalanche 2002 & Up C&K 2500 Standard & HD 1999 & UpSuburban 2000 & UpTahoe/Yukon 2000 & Up
Chev/GMC Vans (RWD & 4WD):Express & Savana 1500, 2500, 3500 2003 & Up
87365 - Ford, Mercury, Lincoln Camber Adjustment BoltThe 87365 adjustable camber kit allows additional camber changesup to +/-1.5° for a total of +/-2.5°, on the popular Ford Crown Victoria,Mercury Marquis, and the Lincoln Town Car. Sagging of thesuspension of these heavy-weight vehicles is normal androutinely causes negative camber problems.
86375 - GMC Replacement Front Alignment Plate And Cam (Pair)The 86375 kit is a stock OE replacement cam/bolt kit for newer GM 1/2, 3/4and 1 ton truck and van applications from 1999 and up. These kits are for camberand caster adjustment. Fast, simple installation.
Part N Make and Model Year
44-2506 Chevrolet: Chev Express 2003 & up
GMC: Savana Van 2003 & up
2 per package (1 kit required per vehicle)
44-2506 & 44-2507 - “Quick Cam” Replace outboard original equipment non-adjustable cam with “Quick Cam” featuring easy to access allen wrench slot.Unique design allows fast and easy “on-vehicle” camber/caster adjustment. Works with original equipment bolt, cuttinginstallation time greatly.
Part N Make and Model Year
44-2507 Chevrolet: Colorado 4X4 2004 & up
GMC: Canyon 2004 & upHummer H3 2006 & up
Isuzu: 135/128 2006 & up
4 per package (1 kit required per vehicle)
41
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
PARTS
Required: 1 kit per wheel Installation time: .3 hr/side
Part No Adjustment Range Make and Model Year
86250 Front Camber +/-1.0°
Front Caster +/-1.5°
Ford: F150 2004 & Up Expedition 2007 & Up
Lincoln: Mark LT 2006 & Up Navigator 2007 & Up
Chevrolet: Equinox 2005 & Up
Pontiac: Torrent 2006-09
Saturn: Vue 2006-09
Suzuki: XL-7 2006 & Up
Ford: Explorer & Ranger(Vehicles with new SLA suspension) 1995-01 Explorer Sport 2001-03 Explorer Sport Trac 2001-04
Mazda: B Series Pickup 1998-Newer
86250 - Ford Adjustable Cam Nut/BracketThis innovative cam and sturdy bracket can save time and money. Easily adjustcamber and caster on F150’s from ’04 and up (including late model) and ’07 & upExpeditions. No need to remove the OE bolt or stabilizer bar. The sturdy guidebracket allows for live adjustments.
Part No Adj. Rang Make and Model Year
295 2°
295 - Truck Cams “Quick Cam” allows adjustment of caster/camber in just minutes.Works with O.E. bolts cutting installation time by 75% when comparedto cam bolt kits! Quick adjustment feature allows fast, easy andexact settings.
2 cams per box – 2 kits required per vehicle
Required: 1 per wheel Installation time: .3 hr/side
Part No Adjustment Range Make and Model Year
87420 Camber: +/-1.0°
87420 - GM REAR CAM NUTThis cam nut replaces the non-adjustable nut on the rear lower of toe changewhen used in conjunction with the stock camber nut. This kit can be used toadjust either the camber or toe adjusting bolts.
42
1-800-361-3524FOR YOUR NEAREST DISTRIBUTOR OR TECHNICAL SUPPORT CALL
PARTS