WELL TESTING OPERATIONS: Surface Well Testing Equipment  

www.oiltestgroup.com  

Well Testing Equipment Catalogue Surface Well Testing Equipment . ELECTRICAL TRANSFER PUMP

Specifications

Transfer pumps are typically used to pump oil from the gauge or surge tank and discharge it at sufficiently high pressure to the burners.

In special circumstances the high flow rate transfer pump is used to inject oil production into an existing flow line.

High, medium and low flow rate pumps are normally electrically powered, although it is possible to have diesel driven varieties of the medium and low. Centrifugal pump contains a central rotating wheel, the impeller, that uses centrifugal force to impart high velocity to the liquid, and then converts most of this velocity to pressure. Centrifugal pumps operate at relatively high rotation speeds. CRUDE OIL TRANSFER CENTRIFUGAL PUMP

Pump Rate: 5,000 bbl/day Discharge Pressure: 191 psig Inlet Connection: 3” Flat faced Flanged Outlet Connection: 2” Flat Faced Flanged Options: Union connection Check Valve on outlet of pump Pump Type: Skid mounted suitable for offshore use Panel Rating: Explosion Proof Motor and Starter Electrical Requirement: 3 phase 380V Cycle: 50 Hz Features: Supplied with 50 feet electrical cable NPSH: 8.5 feet Design Basis Specific Gravity: 0.85 Viscosity: 1.22 cP Atmosphere: 14.7 psi