END PLUG TYPE 1

ORDER CODE

BOREØ(mm)

DØ(mm)

THREADØ(mm)

A(mm)

S1(mm)

GØ(mm)

RP108 25 35 - 7 2 3.25

RP109 30 40 - 8 2 4.25

RP110 32 42 - 8 2 4.25

RP111 35 45 - 10 2 4.25

RP112 (1) 40 50 - 10 2 4.25

RP113 45 55 - 10 2 4.25

RP114 (1) 50 60 - 10 2 4.25

RP115 55 65 - 12 2 4.25

RP116 (1) 60 70 - 12 2 4.25

RP116B 63 73 - 12 2 4.25

RP116A 65 75 - 12 2 4.25

RP117 65 80 - 12 2 4.25

RP118 (1) 70 80 - 12 2 4.25

RP118B 70 85 - 12 2 4.25

RP119 75 90 - 12 2 4.25

RP120B 80 90 - 12 2 4.25

RP120 (1) 80 95 - 12 2 4.25

RP121 85 100 - 15 2 4.25

RP122 90 105 - 15 2 4.25

RP123 100 115 - 15 2 4.25

RP123B 110 125 - 15 2 6.25

RP123F 110 130 - 15 2 6.25

RP124 120 140 - 18 2 6.25

RP125 125 145 - 18 2 6.25

RP125A 140 160 - 18 2 6.25

RP126 150 170 - 20 2 6.25

RP126A 160 180 - 20 2 6.25

RPCF00180185 180 - 185 x 2.5 35 - -

RPCF00200205 200 - 205 x 2.5 48 - -

RPCF00220228 220 - 228 x 2.5 48 - -

RPCF00250255 250 - 255 x 2.5 48 - -

RPCF00300308 300 - 308 x 3 60 - -

END PLUG TYPE 2 (THICK)

ORDER CODE

BOREØ(mm)

DØ(mm)

THREADØ(mm)

A(mm)

S1(mm)

GØ(mm)

RP111A 35 45 - 14 4 4

RP112A 40 50 - 14 4 4

RP113A 45 55 - 14 4 4

RP114A 50 60 - 15 4 4

RP115A 55 65 - 15 4 4

RP116D 60 70 - 18 5 4

RP116C 63 73 - 18 5 4

RP117A 65 75 - 18 5 4

RP118A 70 80 - 18 5 4

RP119A 75 90 - 20 6 4

RP120A 80 95 - 20 6 4

RP121A 85 100 - 20 6 4

RP122A 90 105 - 20 6 4

RP123A 100 115 - 22 7 4

RP123E 110 125 - 22 7 4

RP123C 110 130 - 22 7 4

RP124A 120 140 - 25 8 4

RP125B 125 145 - 25 8 4

RP125C 140 160 - 28 10 4

RP126B 150 170 - 28 10 4

RP126C 160 180 - 30 12 4

PLEASE NOTE: END PLUGS TYPE 1 LISTED IN THE UPPER RIGHTHAND TABLE ARE DESIGNED TO ACCEPT OTHER PARTS BEINGWELDED TO THEM FOR EXAMPLE: SWIVEL BEARINGS, CLEVISES ETC.THE ADDITION OF THESE PARTS GIVES ADDED RIGIDITY, WHICH ASSISTS IN WITHSTANDING HYDRAULIC PRESSURE AND BENDINGMOMENTS.

WE RECOMMEND THE TYPE 2 END PLUGS LISTED IN THE LOWERRIGHT HAND TABLE FOR USE ON PLAIN ENDED CYLINDER DESIGNS. PLEASE ALSO NOTE THAT THE USE OF THE END PLUGS WITH S1DIMENSION LARGER THAN 2mm WILL REDUCE THE AVAILABLE STROKE OF THE TUBE.

(1) = SIZE CAN BE SUPPLIED IN AISI 316 GRADE STAINLESS STEEL PLEASE QUOTE ‘SS’ IN PART NUMBER, I.E RPSS114

STEEL - FE510C A105 & UNI-C40 (LARGE BORE)

END PLUG TYPE 1

END PLUG TYPE 2(THICK)

LARGE BORE END PLUG(Ø180►300 BORE)

WELDABLE FLAT END PLUGS

136 STEERFORTH