· Web viewOffering an extensive line of products such as antennas, enclosures, cable, and solar-powered base stations that support these networks, Ventev Wireless Infrastructure

SECTION 16730WIRELESS NETWORK COMMUNICATIONS EQUIPMENT

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2017 - 2017 ARCAT, Inc. - All rights reserved

PART 1 GENERAL

1.1 SECTION INCLUDES

A. WI-Fi Antennas

B. Raised Access Floor Antennas

C. Suspended Ceiling Tile Enclosures

D. WiFi NEMA Enclosures

E. Access Point Mounting

1.2 RELATED SECTIONS

A. Section 16050 - Basic Electrical Materials and Methods.

1.3 REFERENCES

A. UL50 - Enclosures for Electrical Equipment, Non-Environmental Considerations.

B. UL508 - Industrial Control Equipment.

C. UL508A - Standard for Industrial Control Panels.

D. UL94 - Standard for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances.

E. NEMA Enclosure Types.

1.4 SUBMITTALS

A. Submit under provisions of Section 01300.

B. Product Data: Manufacturer's data sheets on each product to be used, including:1. Preparation instructions and recommendations.2. Storage and handling requirements and recommendations.3. Installation methods.

C. Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.

D. Manufacturer's Certificates: Certify products meet or exceed specified requirements.

E. Closeout Submittals: Provide manufacturer's maintenance instructions that include recommendations for periodic cleaning and maintenance.

16730-1

1.5 QUALITY ASSURANCE

A. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.1. Finish areas designated by Architect.2. Do not proceed with remaining work until workmanship, color, and sheen are

approved by Architect.3. Refinish mock-up area as required to produce acceptable work.

1.6 DELIVERY, STORAGE, AND HANDLING

A. Store products in manufacturer's unopened packaging until ready for installation.

B. Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.

1.7 PROJECT CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

1.8 WARRANTY

A. Manufacturer's standard Two Year limited Warranty against defects in materials or workmanship.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Ventev Innovations, which is located at: 10999 McCormick Rd.; Hunt Valley, MD 21031; Toll Free Tel: 800-759-9996; Tel: 717-770-2317; Email:request info ([email protected]); Web:www.ventev.com

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01600.

2.2 WIFI ANTENNAS

A. Part Number: M602025O1D43602RA; 2.4/5GHz MIMO Antenna designed to operate with any demanding wireless communication system.1. Frequency Range: 2400~2500 / 5150~5850 MHz2. Gain: 2 dBi / 2.5 dBi3. VSWR: <=2.0 / <=2.54. Polarization: Vertical5. Horizontal Beamwidth: 360 degrees6. Vertical Beamwidth: 90 degrees / 160 degrees7. Max Power: 2W8. Connector: RA RPTNC Plug with 36 inches Cable9. Dimensions: 5.4 inches by 2.5 inches by 1.2 inches10. Operating Temperature Range: Minus 40 degrees F to plus 140 degrees F

B. Part Number: M6025040O3D402MW; 2.4/5 GHz Micro Omni Antenna optimized for small form factor/aesthetic and mobile Wi-Fi applications.1. Frequency Range: 2400-2500 MHz

16730-2

a. Bandwidth: 100 MHzb. Gain: 2.5 dBic. VSWR: <=2

2. Frequency Range: 4900 - 5850 MHza. Bandwidth: 950 MHzb. Gain: 4 dBic. VSWR: <=2

3. Impedance: 50 ohms4. Polarization: Vertical5. Power: 50 watts6. Connector: RPTNC male7. Port number: 48. Size: 3.54 inches by 1.57 inches9. Weight: 4.4 oz10. Operating Temperature: minus 40 degrees F to plus 158 degrees F11. Mounting Method: Surface Mount

C. Part Number: M6040060O2D1802R; TerraWave 2.4/5GHz 4/6 dBi Mini Quad Ceiling Antenna with Four RA RPTNC Plugs and 18 inch Pigtails.1. Frequency Range: 2400 ~ 2500 MHz / 5150 ~ 5850 MHz2. Bandwidth: 100 MHz / 700 MHz3. Gain: 4 dBi / 6 dBi4. Vertical Beamwidth: 60 degrees / 70 degrees5. Horizontal Beamwidth: 360 degrees6. VSWR: <= 2.0 / <= 2.57. Nominal Impedance: 50 Ohms8. Polarization: Vertical9. Max Power: 2 Watts10. Connector: RA RPTNC Plug with 18 inch Pigtail11. Dimensions: 5.4 inches by 2.9 inches by 1 inch12. Weight: 0.44 lbs13. Operating Temperature Range: minus 40 degrees F to plus 158 degrees F14. Mounting Style: Center Thread Screw

D. Part Number: M6050060D37202WSX; TerraWave 2.4/5 GHz Junction Box Wi-Fi Antenna with 4-Lead MIMO radios functioning in the 802.11n wireless protocol band.1. Frequency Range: 2400 2484 MHz / 4900 5885 MHz2. Gain: 5dBi / 6dBi3. Polarization: 2 x Horizontal; 2 x Vertical4. Horizontal Beamwidth: 75 degrees plus or minus 15 degrees5. Vertical Beamwidth: 75 degrees plus or minus 15 degrees6. Front to Back Ratio: 9 dB / 12 dB7. VSWR/Impedance: 2:18. IsolationCross Polarized Ports: 12 dB / 20 dB9. Input Power: 20 W10. Dimensions (L x W x H):

a. Gang Box Only: 6 inches by 3.7 inches by 3.6 inchesb. With Cover: 6.75 inches by 3.85 inches by 4.88 inches

11. Connector type: 4 x RPTNC Plug12. Pigtail Length: 72 inches13. Mounting Options: Wall Mount14. Application Environment: Inside Drywall Installation15. Construction: Three Gang Electrical Box16. Tilt Option: 0 - 45 degrees17. Radome Color: White

16730-3

E. Part Number: M6060060D3D3602TM; WiFi Micro Patch with Mount1. Frequency Range: 2400~2500 / 4900~5900 MHz2. Gain: 6 dBi3. Bandwidth: 100 / 985 MHz4. VSWR: 2:1 Nominal / 2:1 Nominal5. Polarization: 2 x Horizontal, 2 x Vertical6. Front-to-Back Ratio: 9 dBi / 15 dBi7. Impedance: 50 Ohms8. Horizontal Beamwidth: 80 degrees plus or minus 10 degrees9. Vertical Beamwidth: 90 degrees plus or minus 10 degrees10. Power: 20 W11. Connector: 4 x RPTNC Plug with 3 foot Pigtails12. Mounting Options: Ceiling / Pole / Wall Mount13. Application Environment: IP5414. Dimensions: 4.7 inches by 4.7 inches by 1.0 inch15. Construction: UV Resistant PC16. Color: White17. Compatible with Cisco 2602e, 2702e, 3602e, 3702e, and 1850e access points.

F. Part Number: M6060060M1D43602M; 2.4/5Ghz Small Form Omni antenna with 4x RPTNC Plug Connectors with enterprise class 802.11n/ac MIMO access points.1. Frequency Range: 2400~2500 / 4900~5850 MHz2. Bandwidth: 100 / 985 MHz3. Gain: 6 dBi4. Vertical Beamwidth: 50 degrees/30 degrees5. Horizontal Beamwidth: 360 degrees/360 degrees6. VSWR: <=2.0 / <=2.07. Nominal Impedance: 50 Ohms8. Polarization: Vertical9. Max Power Rating: 10W10. Dimensions: 6 inches (H) by 4 inches (W)11. Weight: 3 lbs12. Connector: 4 x RPTNC Plug13. Number/Length/Type Pigtails: 4 x 3 foot Pigtails / RG5814. Operating Temperature: minus 40 degrees F to plus 158 degrees F

G. Part Number: M040030D33620WS; 2.4/5 GHz Junction Box WiFi Antenna.1. Frequency Range:

a. 2400 2484 MHz, Gain 5dBib. 4900 5885 MHz, Gain 6dBi

2. Polarization: 2 x Horizontal, 2 x Vertical3. Horizontal Beamwidth: 75 degrees plus or minus 15 degrees4. Vertical Beamwidth: 75 degrees plus or minus 15 degrees5. Front to Back Ratio:

a. 9 dB at 2400 2484 MHzb. 12 dB at 4900 5885 MHz

6. VSWR/Impedance: 2:17. IsolationCross Polarized Ports:

a. 12 dB at 2400 2484 MHzb. 20 dB at 4900 5885 MHz

8. Input Power: 20 W9. Dimensions (L x W x H);

a. Gang Box Only: 6 inches by 3.7 inches by 3.6 inchesb. Gang Box With Cover: 6.75 inches by 3.85 inches by 4.88 inches

10. Connector type: 4 x RPSMA Plug11. Pigtail Length: 72 inches

16730-4

12. Mounting Options: Wall Mount13. Application Environment: Inside Drywall Installation14. Construction: Three Gang Electrical Box:15. Tilt Option: 0 degrees - 45 degrees16. Radome Color: White

H. Part Number: M6030040O1D1820MP; 2.4/5GHz Mini 3 Pack multiple-output (MIMO) omnidirectional antenna.1. Frequency Range: 2400 ~ 2483 / 5150 ~ 5850 MHz2. Bandwidth: 83 / 700 MHz3. Gain: 3 / 4 dBi4. Vertical Beamwidth: 90 degrees / 160 degrees5. Horizontal Beamwidth: 360 degrees6. VSWR: <= 2.07. Nominal Impedance: 50 Ohms8. Polarization: Vertical9. Max Power: 2 Watts10. Connector: RPSMA Plug11. Pigtail Length: 18" Plenum12. Dimensions: 5.9 inches by 2.9 inches by 1.0 inch13. Weight: 1.55 lbs14. Operating Temperature Range: minus 40 degrees F to plus158 degrees F15. Lightning Protection: DC Ground16. Hole Required to Mount Antenna: 1 inch

I. Part Number: M6030040O1D3620DP; 2.4/5GHz Mini 2Pack multiple-output (MIMO) omnidirectional antenna with RPSMA Plug Connectors, Dual Band Leads.1. Frequency Range: 2400~2500 / 5150~5850 MHz2. Bandwidth: 100 / 700 MHz3. Gain: 3 dBi / 4 dBi4. Vertical Beamwidth: 100 degrees / 100 degrees5. Horizontal Beamwidth: 360 degrees6. VSWR: <= 2.07. Polarization: Vertical8. Max Power: 2W9. Lightning Protection: DC Grounded10. Connector: RPSMA Plug with 36 inches Cable11. Dimensions: 2.9 inches by 5.4 inches by 1.0 inch12. Weight: .39 lbs13. Operating Temperature Range: minus 40 degrees F to plus158 degrees F

J. Part Number: M6060060M1D43620M; 2.4/5GHz Small Form Omni antenna 4x RPSMA Plug Connectors.1. Frequency Range: 2400~2500 / 4900~5850 MHz2. Bandwidth: 100 / 985 MHz3. Gain: 6 dBi4. Vertical Beamwidth: 50 degrees/30 degrees5. Horizontal Beamwidth: 360 degrees/360 degrees6. VSWR: <=2.0 / <=2.07. Nominal Impedance: 50 Ohms8. Polarization: Vertical9. Max Power Rating: 10W10. Dimensions: 6 inches (H) by 4 inches (W)11. Weight: 3 lbs12. Connector: 4 x RPSMA Plug13. Number/Length/Type Pigtails: 4 x 3 foot Pigtails / RG58

16730-5

14. Operating Temperature: minus 40 degrees F to plus 158 degrees F

2.3 RAISED ACCESS FLOOR ANTENNAS

A. Part Number: M6030030O42402TA Floor Wi-Fi Antenna; Raised Access Floor Wi-Fi Antenna Specifications (Antenna installed in Haworth TecCrete 1250 24 inch by 24 inch Floor Tile)1. Frequency Ranges: 2.4-2.5 GHz

a. Gain: <= 3 dBi2. Frequency Ranges: 5.150-5.850 GHz

a. Gain: <= 6 dBi3. Vertical Beamwidth (Antenna Length Axis): 55/404. Vertical Beamwidth (Antenna Width Axis): 45/255. Hortizontal Beamwidth: 3606. Front-to-Back Ratio: NA7. VSWR:<= 2.5 dBi. The VSWR readings assume carpet is covering the Panel.8. Passive Inter-Modulation: NA9. Polarization: Vertical10. Operating Temperature: 0 degrees F to 140 degrees F11. Max Power Rating: 10W12. Connector and Leads: 4x RPTNC Plug Connectors and 4 by 36 inch Plenum Leads13. Dimensions: Length: 13.78 inches; Width: 9 inches; Height: 0.11 inches.

B. Part Number: M6030030O42402TA2; Raised Access Floor Wi-Fi Antenna -1500 (Antenna installed in Haworth TecCrete 1500 Tile)1. Frequency Ranges: 2.4-2.5 GHz / 5.150-5.850 GHz2. Gain: <= 3 dBi / <= 6 dBi3. Vertical Beamwidth (Antenna Length Axis): 55/404. Vertical Beamwidth (Antenna Width Axis): 45/255. Horizontal Beamwidth: 3606. Front-to-Back Ratio: NA7. VSWR: <= 2.5 dBi / <= 2.5 dBi. VSWR readings assume carpet is covering the Panel.8. Passive Inter-Modulation: NA9. Polarization: Vertical10. Operating Temperature11. 0 degrees F to 140 degrees F12. Max Power Rating: 10W13. Connector and Leads: 4x RPTNC Plug Connectors and 4 x 36 inch Plenum Leads. All

leads same color.14. Dimensions: Length: 13.78 inches; Width: inches; Height: 0.11 inches.

2.4 SUSPENDED CEILING TILE ENCLOSURES

A. Part Number: TW-CTEN-2X2-205B; 2 foot by 2 foot Bevel Ceiling Tile Enclosure Ceiling Tile Enclosure CTEN for AP2051. Size: 2 foot by 2 foot by 4 inch dimensions that easily fit into any 2 foot by 2 foot or 2

foot by 4 foot ceiling tile grid2. Constructed of powder-coated aluminum3. No moving parts significantly reduces failure rates4. Meets NEC300-22 and 300-23 standards, making it safe for plenum/air handling

installations5. Includes key lock for additional security6. Designed to allow AP to be serviced without removing enclosure from ceiling tile grid7. Meets common building code requirements by including integrated holes for securing

enclosure to permanent fixture or structure8. Weight: 4 lbs. without AP / 5.5 lbs. with AP9. Designed specifically for Aruba 205 only

16730-6

10. Includes cord grip

B. Part Number: TW-CTEN-2X2-205U; 2 foot by 2 foot Flush Ceiling Tile Enclosure CTEN for AP2051. Size: 2 foot by 2 foot by 4 inch that easily fit into any 2 foot by 2 foot or 2 foot by 4 foot

ceiling tile grid2. Constructed of powder-coated aluminum3. Includes key lock for additional security4. Weight: 4 lbs. without AP / 5.5 lbs. with AP5. Includes cord grip6. Meets NEC300-22 and 300-23 standards, for plenum/air handling installations7. Meets common building code requirements with integrated holes for securing

enclosure to permanent fixture or structure

C. Part Number: TW-CTEN-2X2-215U; 23.75x23.75x1.5 Aruba AP 215 Universal Ceiling Tile Enclosure1. Size: 2 foot by 2 foot by 4 inch that easily fit into any 2 foot by 2 foot or 2 foot by 4 foot



D. Part Number: TW-CTEN-2X2-225B; 23.75x23.75x1.5 Aruba 225 Bevel Ceiling Tile Enclosure CTEN1. Size: 2 foot by 2 foot by 4 inch that easily fit into any 2 foot by 2 foot or 2 foot by 4 foot



E. Part Number: TW-CTEN-2X2-225U; 23.75x23.75x1.5 Aruba 225 CTEN Universal Ceiling Tile Enclosure1. Size: 2 foot by 2 foot by 4 inch that easily fit into any 2 foot by 2 foot or 2 foot by 4 foot



F. Part Number: TW-HD-MOUNTARUBA; T-Bar Co-Lo Mount, Co-Locating Mount for RPSMA Access Points and Co-Located Antennas.1. Dimensions: 9.63 inch by 10.07 inch by 5.48 inch2. Weight: 2 lbs3. Material: Aluminum4. Operating Temperature Range: minus 4 degrees F to plus 131 degrees F5. Compatible with TerraWave 501621, 527504, 572251, 568911, 333918, 393218,

16730-7

544625, and 500885 antennas6. Mount hosts all Aruba 100, 200, and 300 series indoor access points, Aerohive's 121,

230, 330, and 390 access points, and Samsung's 303e and 403e access points

G. Part Number: CTEN-2X2-11113F-W; 2 foot by 2 foot by 4 inch Ceiling Tile Enclosure with White Bubble.1. Powder-coated aluminum2. Includes Universal T-Bar Back Plate to accommodate most access points3. Meets NEC300-22 and 300-23 standards for plenum/air handling installations4. Includes key lock for security5. Designed to allow AP to be serviced without removing enclosure from ceiling tile grid6. Meets common building code requirements by including integrated holes for securing


H. Part Number: CTEN-2X2-ID11113W; 2 foot by 2 foot by 4 inch Ceiling Tile WiFi Bubble (W) Ceiling Tile Enclosure CTEN w/Interchangeable Door.1. Powder-coated aluminum2. Includes key lock for security3. Includes cord grip4. Meets NEC300-22 and 300-23 standards for plenum/air handling installations5. Meets common building code requirements by including integrated mounting tabs to

assist in securing enclosure to permanent fixture or structure6. Back box design.7. Compatible Access Points: Aerohive 130; Aruba 205, 215, 225, 325; Cisco 3502i,

3602i, 2602i, 3702i, 2702i; Meru/Fortinet 1010i, 1020i, 322i, 332i, 822i, 832i; Samsung 302i 303i. 403i; 412i

I. Part Number: CTEN-2X2-ID-AP325; 2 foot by 2 foot by 4 inch Ceiling Tile AP325 WiFi Ceiling Tile Enclosure CTEN W/Interchangeable Door1. Powder-coated aluminum2. Includes key lock for security3. Includes cord grip4. Meets NEC300-22 and 300-23 standards for plenum/air handling installations5. Meets common building code requirements by including integrated mounting tabs to

assist in securing enclosure to permanent fixture or structure6. Durable back box design7. Compatible with the Aruba AP325 access point and it ts into both standard or Tegular

suspended ceilings.

J. Part Number: CTEN-2X2-ID-CISCO; 2 foot by 2 foot by 4 inch Ceiling Tile WiFi Cisco Ceiling Tile Enclosure CTEN w/Interchangeable Door.1. Powder-coated aluminum2. Includes key lock for security3. Includes cord grip4. Meets NEC300-22 and 300-23 standards for plenum/air handling installations5. Meets common building code requirements by including integrated mounting tabs to

assist in securing enclosure to permanent fixture or structure6. Durable back box design7. Compatible with Cisco 2602i, 3602i, 2702i, and 3702i access points and fits into both

standard or Tegular suspended ceilings

K. Part Number: CTEN-2X2-ID-HALO; 2 foot by 2 foot by 4 inch Ceiling Tile WiFi Halo Ceiling Tile Enclosure CTEN w/Interchangeable Door1. Powder-coated aluminum2. Includes key lock for security3. Includes cord grip4. Meets NEC300-22 and 300-23 standards for plenum/air handling installations

16730-8

5. Meets common building code requirements by including integrated mounting tabs to assist in securing enclosure to permanent fixture or structure

6. Durable back box design7. Integrates with Cisco Aironet 3700 and 3600 Series wireless access points

L. Part Number: CTEN-2X2-ID-MR34; 2 foot by 2 foot by 4 inch Ceiling Tile MR34 WiFi Ceiling Tile Enclosure CTEN W/Interchangeable Door1. Powder-coated aluminum2. Includes key lock for security3. Includes cord grip4. Meets NEC300-22 and 300-23 standards, making it safe for plenum/air handling

installations5. Meets common building code requirements by including integrated mounting tabs to

assist in securing enclosure to permanent fixture or structure6. Durable back box design7. Compatible with the MR32, MR34, and MR42 access point and fits into both standard

or Tegular suspended ceilings.

M. Ceiling Tile Enclosures: Two year Warranty1. Part Number: TW-CTEN-2X2-1142B; 23.75 inches by 23.75 inches by 1.5"

1142/3500i Beveled Ceiling Tile Enclosure CTENa. Size: 24 inches by 24 inches by 1.5 inchesb. Weight: 3.5 pounds without AP installed, 5.5 pounds with AP installedc. Designed to meet NEC300-22 and 300-23 to mount the Cisco AP 1142, Cisco

AP 3500 series and Cisco AP 3600 series in plenum/air handling areasd. Enclosure fits into a tegular style 2 foot by 2 foot suspended ceiling tile gride. Constructed of powder-coated aluminumf. Includes CAT60 key lock for securityg. No moving partsh. No modification of the ceiling tile is required (for standard 2 foot by 2 foot ceiling

tile grids)i. Servicing the AP can be completed without removing the enclosure from the

ceiling tile gridj. Includes integrated holes for securing the enclosure to permanent fixture or

ceiling structurek. Includes cord grip

N. Part Number: TW-CTEN-2X2-1142U; 23.75 inches by 23.75 inches by 1.5 inches 1142/3500i CTEN. Universal Ceiling Tile Enclosure1. Size: 24 inches by 24 inches by 1.5 inches2. Weight: 3.5 pounds without AP installed, 5.5 pounds with AP installed3. Designed to meet NEC300-22 and 300-23 to mount the Cisco AP 1142, AP 1602i, AP

2602i, AP 3502i, AP 3602i and AP 3702i in plenum/air handling areas4. Enclosure fits into a standard or tegular 2 foot by 2 foot suspended ceiling tile grid5. Constructed of powder-coated aluminum6. Includes CAT60 key lock for security7. No moving parts8. No modification of the ceiling tile is required (for standard 2 foot by 2 foot ceiling tile

grids)9. Servicing the AP can be completed without removing the enclosure from the ceiling

tile grid10. Includes integrated holes for securing the enclosure to permanent fixture or ceiling

structure11. Includes cord grip

O. Part Number: TW-CTEN-2X2-3802U; 23.75x23.75x1.5 3802 Ceiling Tile Enclosure CTEN

16730-9

1. Size: 23.75 inches by 23.75 inches by 4 inches. Easily fits into any 2 foot by 2 foot or 2 foot by 4 foot ceiling tile grid

2. Designed to meet Cisco 3802i and 2802i access points.3. Constructed of powder-coated aluminum, making it one of the lightest enclosures on

the market4. Includes key lock for additional security5. Sleek form factor allows for simple installation no6. modification of existing ceiling tile grid required7. Includes cord grip8. Meets NEC300-22 and 300-23 standards, making it safe for plenum/air handling


assist in securing enclosure to permanent xture or structure10. Durable back box design

P. Part Number: TW-CTEN-P; 12 inches by 24 inches Universal Plastic Ceiling Tile Enclosure.1. Size: 12 inches by 24 inches by 7 inches (24 inches by 24 inches by 7 inches with

insert)2. Weight: 7.5 pounds (9 pounds with insert)3. Constructed of light-weight, fire retardant acrylontitrile-butadiene styrene (ABS) plastic4. Comprised of UL 94 V0-rated raw materials5. Designed to meet National Electric Code (NEC) 300-22 and 300-23 for plenum

installations6. Servicing the AP can be completed without removing the enclosure from the ceiling

tile grid7. Adjustable backplate pre-drilled for Cisco APs with self-tapping screws to

accommodate other manufacturer's APs8. With a 1 foot by 2 foot insert to fit either a 1 foot by 2 foot or 2 foot by 2 foot ceiling tile

grid9. Two Quarter Turn Locks10. Clear window and vented door inserts11. Includes hardware to secure the enclosure to permanent fixture or ceiling structure.

Q. Part Number: TW-HC-1142A; 18 inches by 18 inches by 1.5 inches AP 1142/3500i Hard Cap Ceiling Enclosure.1. Size: 18 inches by 18 inches by 1.5 inches2. Weight: 2.5 pounds without AP installed, 4.5 pounds with AP installed3. Designed to meet NEC300-22 and 300-23 to mount the Cisco AP 1142, Cisco AP

3502i and Cisco AP 3602i in plenum/air handling areas4. Enclosure fits into standard ceiling or wall construction (minimum clearance between

studs is 13 inches)5. Constructed of powder-coated aluminum6. Includes CAT60 key lock for security, 1 cord grip, 4 wood screws and 4 toggle bolts7. No moving parts

R. Part Number: CTEN-2X2-11113B-C; 2 foot by 2 foot or 2 by 4 inch Bevel Ceiling Tile Enclosure with Clear Bubble1. Size: 24 inch by 24 inch by 4 inch that slides easily into any 2 foot by 2 foot or 2 by 4

foot ceiling tile grid.2. Constructed of powder-coated aluminum3. Includes universal T-Bar back plate.4. No moving parts significantly reduces failure rates5. Meets NEC300-22 and NEC300-23 standards for plenum/air handling installations.6. Includes key lock.7. Includes integrated holes for securing enclosure to permanent fixture or structure.8. Weight: 4 lbs. without AP / 5.5 lbs. with AP

16730-10

9. Includes cord grip.

S. Part Number: CTEN-2X2-11113B-W; 2 foot by 2 foot or 2 by 4 inch Bevel Ceiling Tile Enclosure with White Bubble1. Size: 24 inch by 24 inch by 4 inch that slides easily into any 2 by 2 foot or 2 by 4 foot;

ceiling tile grid.2. Constructed of powder-coated aluminum3. Includes universal T-Bar back plate.4. No moving parts significantly reduces failure rates5. Meets NEC300-22 and NEC300-23 standards for plenum/air handling installations.6. Includes key lock.7. Includes integrated holes for securing enclosure to permanent fixture or structure.8. Weight: 4 lbs. without AP / 5.5 lbs. with AP9. Includes cord grip.

T. Part Number: CTEN-2X2-11113F-C; 2 foot by 2 foot or 2 by 4 inch Ceiling Tile Enclosure with Clear Bubble1. Size: 24 inch by 24 inch by 4 inch that slides easily into any 2 by 2 foot or 2 by 4 foot

ceiling tile grid.2. Constructed of powder-coated aluminum3. Includes universal T-Bar back plate.4. No moving parts significantly reduces failure rates5. Meets NEC300-22 and NEC300-23 standards for plenum/air handling installations.6. Includes key lock.7. Includes integrated holes for securing enclosure to permanent fixture or structure.8. Weight: 4 lbs. without AP / 5.5 lbs. with AP9. Includes cord grip.

U. Part Number: CTEN-2X2-ID11113C; 2 foot by 2 foot or 2 foot by 4 foot WiFi Bubble(C) Ceiling Tile Enclosure CTEN with Interchangeable Door1. Size: 23.75 inch by 23.75 inch by 4 inch. Easily fits into any 2 foot by 2 foot or 2 foot

by 4 foot ceiling tile grid2. Constructed of powder-coated aluminum, making it one of the lightest enclosures on

the market3. Includes key lock for additional security4. Includes cord grip5. Meets NEC300-22 and 300-23 standards, making it safe for plenum/air handling


assist in securing enclosure to permanent fixture or structure7. Durable back box design

2.5 WIFI NEMA ENCLOSURES

A. Part Number/Size:1. Part Number: CV12104KC-4.5; 12 inch by 10 inch by 4 inch Polycarbonate Enclosure.

Clear Door/Key Lock2. Part Number: CV12106KC-4.5; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure.

Clear Door/Key Lock3. Part Number: CV14126KC-4.5; 14 inch by 12 inch by 6 inch Polycarbonate Enclosure.

Clear Door/Key Locks4. Features:

a. Includes mounting plate with pre-drilled holes to support Cisco wireless access points

b. Operating temperature range: minus 40 degrees F to plus 265 degrees Fc. Can be mounted indoors or outdoors to provide NEMA 4X protectiond. Furnished hardware kit includes panel mounting screws

16730-11

e. RoHS compliantf. Polycarbonate UL F1 Rated for Outdoor UV Exposureg. Color is light gray with a gloss finishh. Door: Cleari. Locking Mechanism:

1) CAT60 Lockj. Bulkhead Antenna Holes

1) 4 Holesk. Bulkhead Antenna Hole Sizes

1) 1/2 inch (RPTNC)l. Accessories:

1) Pole Mount Kit2) Wall Mount Kit3) Custom Jumpers4) NEMA Plug5) Lightning Protection6) Replacement Keys

B. Part Number/Size:1. Part Number: CV12104KC-BASIC; 12 inch by 10 inch by 4 inch Cisco Backplate

Polycarbonate Enclosure; Clear Door/Key Lock2. Part Number: CV12104KC-BASIC; 12 inch by 10 inch by 4 inch Cisco Backplate

Polycarbonate Enclosure. Clear Door/Key Lock3. Part Number: CV14126KC-BASIC; 14 inch by 12 inch by 6 inch Enclosure. Clear

Door/Key Locks4. Features:


b. Operating temperature range: minus 40 degrees F to plus 265 degrees Fc. Can be mounted indoors or outdoors to provide NEMA 4X protectiond. Furnished hardware kit includes panel mounting screwse. RoHS compliantf. Polycarbonate UL F1 Rated for Outdoor UV Exposureg. Color is light gray with a gloss finishh. Door: Cleari. Locking Mechanism:


1) Basick. Accessories:


C. Part Number/Size:1. Part Number: CV12104KC-NH 12 inch by 10 inch by 4 inch Polycarbonate Enclosure.

Clear Door/Key Lock2. Part Number: CV12106KC-NH 12 inch by 10 inch by 6 inch Polycarbonate Enclosure.

Clear Door/Key Lock3. Part Number: CV14126KC-NH14 inch by 12 inch by 6 inch Enclosure. Clear Door/Key

Locks4. Part Number: CV12106KC-ODO4T 12 inch by 10 inch by 6 inch Polycarbonate

Enclosure. Clear Door/Key, 4T ODO

16730-12

5. Features:a. Includes mounting plate with pre-drilled holes to support Cisco wireless access

pointsb. Operating temperature range: minus 40 degrees F to plus 265 degrees Fc. Can be mounted indoors or outdoors to provide NEMA 4X protectiond. Furnished hardware kit includes panel mounting screwse. RoHS compliantf. Polycarbonate UL F1 Rated for Outdoor UV Exposureg. Color is light gray with a gloss finishh. Door: Cleari. Locking Mechanism: CAT60 Lockj. Bulkhead Antenna Holes

1) No Holesk. Accessories:


D. Part Number/Size:1. Part Number: CV12104KO-4.5 12 inch by 10 inch by 4 inch Polycarbonate Enclosure.

Solid Door/Key Lock2. Part Number: CV12106KO-4.5 12 inch by 10 inch by 6 inch Polycarbonate Enclosure.

Solid Door/Key Lock3. Part Number: CV14126KO-4.514 inch by 12 inch by 6 inch Enclosure. Solid Door/Key

Lock4. Features:


b. Operating temperature range: minus 40 degrees F to plus 265 degrees Fc. Can be mounted indoors or outdoors to provide NEMA 4X protectiond. Furnished hardware kit includes panel mounting screwse. RoHS compliantf. Polycarbonate UL F1 Rated for Outdoor UV Exposureg. Color is light gray with a gloss finishh. Door: Solidi. Locking Mechanism:





E. Part Number/Size:1. Part Number: CV12104KO-BASIC; 12 inch by 10 inch by 4 inch Polycarbonate

Enclosure. Solid Door/Key Lock2. Part Number: CV12106KO-BASIC; 12 inch by 10 inch by 6 inch Polycarbonate

16730-13

Enclosure. Solid Door/Key Lock3. Part Number: CV14126KO-BASIC; 14 inch by 12 inch by 6 inch Enclosure. Solid

Door/Key Lock4. Features:






F. Part Number/Size:1. Part Number: CV12104KO-NH; 12 inch by 10 inch by 4 inch Polycarbonate

Enclosure. Solid Door/Key Lock2. Part Number: CV12106KO-NH; 12 inch by 10 inch by 6 inch Polycarbonate

Enclosure. Solid Door/Key Lock3. Part Number: CV12106KO-ODO4T; 12 inch by 10 inch by 6 inch Polycarbonate

Enclosure. Solid Door/Key. Integrated Omni-Directional Antenna with 4 RPTNC Plug Connectors.

4. Part Number: CV14126KO-NH; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Key Lock


pointsb. Operating temperature range: minus 40 degrees F to plus 265 degrees Fc. Can be mounted indoors or outdoors to provide NEMA 4X protectiond. Furnished hardware kit includes panel mounting screwse. RoHS compliantf. Polycarbonate UL F1 Rated for Outdoor UV Exposureg. Color is light gray with a gloss finishh. Door: Solidi. Locking Mechanism:




1) Pole Mount Kit2) Wall Mount Kit3) Custom Jumpers4) NEMA Plug

16730-14

5) Lightning Protection6) Replacement Keys

G. Part Number/Size:1. Part Number: CV12104LC-4.5; 12 inch by 10 inch by 4 inch Polycarbonate Enclosure;

Clear Door/Latch Locks2. Part Number: CV12106LC-4.5; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure.

Clear Door/Latch Locks3. Part Number: CV14126LC-4.5; 14 inch by 12 inch by 6 inch Enclosure. Clear

Door/Latch Locks4. Features:



1) Locking Latchesj. Bulkhead Antenna Holes




H. Part Number/Size:1. Part Number: CV12104LC-BASIC; 12 inch by 10 inch by 4 inch Polycarbonate

Enclosure. Clear Door/Latch Locks2. Part Number: CV12106LC-BASIC; 12 inch by 10 inch by 6 inch Polycarbonate

Enclosure. Clear Door/Latch Locks3. Part Number: CV14126LC-BASIC; 14 inch by 12 inch by 6 inch Enclosure. Clear






16730-15


I. Part Number/Size:1. Part Number: CV12104LC-NH; 12 inch by 10 inch by 4 inch Polycarbonate Enclosure.

Clear Door/Latch Locks2. Part Number: CV12106LC-NH; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure.

Clear Door/Latch Locks3. Part Number: CV12106LC-ODO4T; 12 inch by 10 inch by 6 inch Polycarbonate

Enclosure. Clear Door/Latch. Integrated Omni-Directional Antenna with 4 RPTNC Plug Connectors.

4. Part Number: CV14126LC-NH; 14 inch by 12 inch by 6 inch Enclosure. Clear Door/Latch Locks


pointsb. Operating temperature range: minus 40 degrees F to plus 265 degrees Fc. Can be mounted indoors or outdoors to provide NEMA 4X protectiond. Furnished hardware kit includes panel mounting screwse. RoHS compliantf. Polycarbonate UL F1 Rated for Outdoor UV Exposureg. Color is light gray with a gloss finishh. Door: Cleari. Locking Mechanism: Locking Latchesj. Bulkhead Antenna Holes



J. Part Number/Size:1. Part Number: CV12104LO-4.5; 12 inch by 10 inch by 4 inch Polycarbonate Enclosure.

Solid Door/Latch Locks2. Part Number: CV12106LO-4.5; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure.

Solid Door/Latch Locks3. Part Number: CV14126LO-4.5; 14 inch by 12 inch by 6 inch Enclosure. Solid




16730-16





K. Part Number/Size:1. Part Number: CV12104LO-BASIC; 12 inch by 10 inch by 4 inch Polycarbonate

Enclosure. Solid Door/Latch Locks2. Part Number: CV12106LO-BASIC; 12 inch by 10 inch by 6 inch Polycarbonate

Enclosure. Solid Door/Latch Locks3. Features:






L. Part Number/Size:1. Part Number: CV12104LO-NH; 12 inch by 10 inch by 4 inch Polycarbonate Enclosure.

Solid Door/Latch Locks2. Part Number: CV12106LO-NH; 12 inch by 10 inch by 6 inch Polycarbonate Enclosure.

Solid Door/Latch Locks3. Part Number: CV14126LO-NH; 14 inch by 12 inch by 6 inch Enclosure. Solid



b. Operating temperature range: minus 40 degrees F to plus 265 degrees Fc. Can be mounted indoors or outdoors to provide NEMA 4X protectiond. Furnished hardware kit includes panel mounting screwse. RoHS compliantf. Polycarbonate UL F1 Rated for Outdoor UV Exposureg. Color is light gray with a gloss finish

16730-17

h. Door: Solidi. Locking Mechanism:




M. Part Number/Size:1. Part Number: CV12106LO-ODP4T-W; 12 inch by 10 inch by 6 inch White

Polycarbonate Enclosure with Integrated Patch Antenna2. Features:

a. Includes aluminum back plate with pre-drilled holes to support wireless access points

b. Operating temperature range: minus 40 degrees F to plus 265 degrees Fc. Can be mounted indoors or outdoors to provide NEMA 4X protectiond. Furnished hardware kit includes panel mounting screwse. Polycarbonate UL F1 Rated for Outdoor UV Exposuref. Color is white with a gloss finishg. Door: Solidh. Locking Mechanism: Locking Latchesi. Accessories:j. Pole Mount Kitk. Wall Mount Kitl. Custom Jumpersm. NEMA Plugn. Lightning Protection

N. Part Number/Size:1. Part Number: UV12104KC-BASIC; 12 inch by 10 inch by 4 inch Universal Backplate

Enclosure. Clear Door/Key Lock2. Part Number: UV12104KC-NH; 12 inch by 10 inch by 4 inch Enclosure. Clear

Door/Key Lock3. Part Number: UV12106KC-BASIC; 12 inch by 10 inch by 6 inch Enclosure. Clear

Door/Key Lock4. Part Number: UV12106KC-NH; 12 inch by 10 inch by 6 inch Enclosure. Clear

Door/Key Lock5. Part Number: UV12104LO-NH; 12 inch by 10 inch by 6 inch Enclosure. Clear

Door/Key Lock6. Part Number: UV12106KC-ODO3S; 12 inch by 10 inch by 6 inch Enclosure. Clear

Door/Key, 3S ODO7. Part Number: UV12106KC-ODO4S; 12 inch by 10 inch by 6 inch Enclosure. Clear

Door/Key, 4S ODO8. Part Number: UV12106KC-ODO4T; 12 inch by 10 inch by 6 inch Enclosure. Clear

Door/Key, 4T ODO9. Part Number: UV12106KC-ODO6S; 12 inch by 10 inch by 6 inch Enclosure. Clear

Door/Key, 6S ODO10. Part Number: UV14126KC-BASIC; 14 inch by 12 inch by 6 inch Enclosure. Clear

Door/Key Lock11. Part Number: UV14126KC-NH; 14 inch by 12 inch by 6 inch Enclosure. Clear

Door/Key Lock

16730-18

12. Part Number: UV14126KC-ODO3S; 14 inch by 12 inch by 6 inch Enclosure. Clear Door/Key, 3S ODO


14. Part Number: UV14126KC-ODO4T; 14 inch by 12 inch by 6 inch Enclosure. Clear Door/Key, 4T ODO



pointsb. Operating temperature range: minus 40 degrees F to plus 265 degrees Fc. Can be mounted indoors or outdoors to provide NEMA 4X protectiond. Furnished hardware kit includes panel mounting screwse. RoHS compliantf. Enclosure Construction: Thermoplastic material UL F1 Rated for Outdoor UV

Exposureg. Finish: Color is light gray with a gloss finishh. Color is light gray with a gloss finish

1) Door:a) Clear

2) Locking Mechanism:a) CAT60 Lock

3) Bulkhead Antenna Holesa) Basicb) No Holesc) 3 Holesd) 4 Holes

4) Bulkhead Antenna Hole Sizesa) 1/2 inch (RPTNC)b) 1/4 inch (RPSMA)

5) Accessories:a) Pole Mount Kitb) Wall Mount Kitc) Custom Jumpersd) NEMA Pluge) Lightning Protectionf) Replacement Keys

O. Part Number/Size:1. Part Number: UV12104KO-BASIC; 12 inch by 10 inch by 4 inch Universal Backplate

Enclosure. Solid Door/Key Lock2. Part Number: UV12104KO-NH; 12 inch by 10 inch by 4 inch Enclosure. Solid

Door/Key Lock3. Part Number: UV12106KO-BASIC; 12 inch by 10 inch by 6 inch Enclosure. Solid

Door/Key Lock4. Part Number: UV12106KO-NH; 12 inch by 10 inch by 6 inch Enclosure. Solid

Door/Key Lock5. Part Number: UV12106KO-ODO3S; 12 inch by 10 inch by 6 inch Enclosure. Solid

Door/Key, 3S ODO6. Part Number: UV12106KO-ODO4S; 12 inch by 10 inch by 6 inch Enclosure. Solid

Door/Key, 4S ODO7. Part Number: UV12106KO-ODO4T; 12 inch by 10 inch by 6 inch Enclosure. Solid

Door/Key, 4T ODO8. Part Number: UV12106KO-ODO6S; 12 inch by 10 inch by 6 inch Enclosure. Solid

Door/Key, 6S ODO

16730-19

9. Part Number: UV14126KO-BASIC; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Key Lock

10. Part Number: UV14126KO-NH; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Key Lock

11. Part Number: UV14126KO-ODO3S; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Key; 3T ODO

12. Part Number: UV14126KO-ODO4S; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Key; 4S ODO

13. Part Number: UV14126KO-ODO4S; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Key; 6S ODO

14. Part Number: UV14126KO-ODO4T; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Key; 4T ODO



Exposureg. Finish: Color is light gray with a gloss finishh. Color is light gray with a gloss finishi. Door:

1) Solidj. Locking Mechanism:

1) CAT60 Lockk. Bulkhead Antenna Holes

1) Basic2) No Holes3) 3 Holes4) 4 Holes

l. Bulkhead Antenna Hole Sizes1) 1/2 inch (RPTNC)2) 1/4" (RPSMA)

m. Accessories:1) Pole Mount Kit2) Wall Mount Kit3) Custom Jumpers4) NEMA Plug5) Lightning Protection6) Replacement Keys

P. Part Number/Size:1. Part Number: UV12104LC-BASIC, 12 inch by 10 inch by 4 inch Universal Backplate

Enclosure. Clear Door/Latch Lock2. Part Number: UV12104LC-NH, 12 inch by 10 inch by 4 inch Enclosure. Clear

Door/Latch Lock3. Part Number: UV12106LC-BASIC, 12 inch by 10 inch by 6 inch Enclosure. Clear

Door/Latch Locks4. Part Number: UV12106LC-NH, 12 inch by 10 inch by 6 inch Enclosure. Clear

Door/Latch Locks5. Part Number: UV12106LC-ODO3S, 12 inch by 10 inch by 6 inch Enclosure. Clear

Door/Latch, 3S ODO6. Part Number: UV12106LC-ODO4S, 12 inch by 10 inch by 6 inch Enclosure. Clear

Door/Latch, 4S ODO

16730-20

7. Part Number: UV12106LC-ODO4T, 12 inch by 10 inch by 6 inch Enclosure. Clear Door/Latch, 4T ODO

8. Part Number: UV12106LC-ODO6S, 12 inch by 10 inch by 6 inch Enclosure. Clear Door/Latch, 6S ODO

9. Part Number: UV14126LC-BASIC14 inch by 12 inch by 6 inch Enclosure. Clear Door/Latch Locks

10. Part Number: UV14126LC-NH14 inch by 12 inch by 6 inch Enclosure. Clear Door/Latch Locks

11. Part Number: UV14126LC-ODO3S14 inch by 12 inch by 6 inch Enclosure. Clear Door/Latch, 3S ODO


13. Part Number: UV14126LC-ODO4T14 inch by 12 inch by 6 inch Enclosure. Clear Door/Latch, 4T ODO




Exposureg. Finish: Color is light gray with a gloss finishh. Door:

1) Cleari. Locking Mechanism:



k. Bulkhead Antenna Hole Sizes1) 1/2 inch (RPTNC)2) 1/4" (RPSMA)

l. Accessories:1) Pole Mount Kit2) Wall Mount Kit3) Custom Jumpers4) NEMA Plug5) Lightning Protection6) Replacement Keys

Q. Part Number/Size:1. Part Number: UV12106LO-NH; 12 inch by 10 inch by 6 inch Enclosure. Solid

Door/Latch Locks2. Part Number: UV12106LO-ODO3S; 12 inch by 10 inch by 6 inch Enclosure. Solid

Door/Latch, 3S ODO3. Part Number: UV12106LO-ODO4S; 12 inch by 10 inch by 6 inch Enclosure. Solid

Door/Latch, 4S ODO4. Part Number: UV12106LO-ODO4T; 12 inch by 10 inch by 6 inch Enclosure. Solid

Door/Latch, 4T ODO5. Part Number: UV12106LO-ODO6S; 12 inch by 10 inch by 6 inch Enclosure. Solid

16730-21

Door/Latch, 6S ODO6. Part Number: UV14126LO-NH; 14 inch by 12 inch by 6 inch Enclosure. Solid

Door/Latch Locks7. Part Number: UV14126LO-ODO3S; 14 inch by 12 inch by 6 inch Enclosure. Solid

Door/Latch, 3S ODO8. Part Number: UV14126LO-ODO4S; 14 inch by 12 inch by 6 inch Enclosure. Solid

Door/Latch, 4S ODO9. Part Number: UV14126LO-ODO4T; 14 inch by 12 inch by 6 inch Enclosure. Solid

Door/Latch, 4T ODO10. Part Number: UV14126LO-ODO6S; 14 inch by 12 inch by 6 inch Enclosure. Solid

Door/Latch, 6S ODO11. Features:


b. Operating temperature range: minus 40 degrees F to plus 265 degrees Fc. Can be mounted indoors or outdoors to provide NEMA 4X protectiond. Furnished hardware kit includes panel mounting screwse. RoHS compliantf. Enclosure Construction: Thermoplastic material UL F1 Rated for Outdoor UV

Exposureg. Color is light gray with a gloss finishh. Door:

1) Solidi. Locking Mechanism:



k. Bulkhead Antenna Hole Sizes1) 1/2 inch (RPTNC)2) 1/4 inch (RPSMA)

l. Accessories:1) Pole Mount Kit2) Wall Mount Kit3) Custom Jumpers4) NEMA Plug5) Lightning Protection6) Replacement Keys

R. Part Number: UV12104LO-BASIC; 12 inch by 10 inch by 4 inch Enclosure. Solid Door/Latch1. Protect RF equipment from elements, theft and tampering2. Includes universal mounting plate to support all major wireless vendors, such as

Motorola, Aruba, Meru, Juniper and others3. Operating temperature range: minus 40 degrees F to plus 265 degrees F4. Can be mounted indoors or outdoors to provide NEMA 4X protection5. Furnished hardware kit includes panel mounting screws and grounding hardware6. All TerraWave polycarbonate enclosures are RoHS compliant7. Enclosure Construction: Constructed of thermoplastic material8. UL F1 Rated for Outdoor UV Exposure9. Finish: Color is light gray with a gloss finish10. Options11. Door: Solid12. Locking Mechanism: Locking Latches13. Bulkhead Antenna Holes

16730-22

a. Basicb. 3 Holesc. 4 Hoesd. No Holes

14. Bulkhead Antenna Hole Sizesa. 1/2 inch (RPTNC)b. 1/4 inch (RPSMA)

S. Part Number: UV12106LO-BASIC; 12 inch by 10 inch by 6 inch Enclosure. Solid Door/Latch Locks1. Protect RF equipment from elements, theft and tampering2. Includes universal mounting plate to support all major wireless vendors, such as




T. Part Number: UV14126LO-BASIC; 14 inch by 12 inch by 6 inch Enclosure. Solid Door/Latch Locks Non-metallic enclosures are commonly used in harsh environments or to protect wireless LAN equipment from damage caused by tampering.1. Protect RF equipment from elements, theft and tampering2. Includes universal mounting plate to support all major wireless vendors, such as




16730-23

U. Part Number: V14126LC-4.25H; 14 inch by 12 inch by 6 inch Heat Enclosure. Clear Door/Latch1. Includes universal mounting plate to support all major wireless vendors, such as

Motorola, Aruba, Meru, Juniper and others2. Operating temperature range: minus 40 degrees F to plus 265 degrees F3. Can be mounted indoors or outdoors to provide NEMA 4X protection4. Furnished hardware kit includes panel mounting screws and grounding hardware5. All TerraWave polycarbonate enclosures are RoHS compliant6. Enclosure Construction: Constructed of thermoplastic material7. UL F1 Rated for Outdoor UV Exposure8. Finish: Color is light gray with a gloss finish9. Options10. Door: Clear11. Locking Mechanism: Locking Latches12. Bulkhead Antenna Holes



2.6 ACCESS POINT MOUNTING

A. Part Number: TW-HD-MOUNT502; Cisco Co-Locating Mount for Access Point and Antenna is designed to simplify deployments and conceal an access point and external cables.1. Dimensions:2. 9.53 inch by 9.98 inch by 4.57 inch3. Weight: 2 lbs4. Material: Aluminum5. Operating Temperature Range: minus 4 degrees F to plus 131 degrees F

B. Part Number: TW-HWM-C-CVR; Compact Horizontal Wall Mount with Cover1. Small form factor, lightweight and low profile design2. Offers mounting solution for most Wireless Access Points3. Rigid base design for improved durability4. Able to secure directly to single Gang electrical box5. Designed with cover that swings down for easy access to AP and cables6. Designed with cover to conceal cabling and data outlet7. Compatible with most manufacturers' APs

C. Part Number: TW-HWM-C-NC; Compact Horizontal Wall Mount - No Cover1. Small form factor, lightweight and low profile design2. Offers mounting solution for most Wireless Access Points3. Rigid base design for improved durability4. Able to secure directly to single Gang electrical box5. Compatible with most manufacturers' APs

D. Part Number: TW-HD-MOUNTARUBA; T-Bar Co-Lo Mount, Co-Locating Mount for RPSMA Access Points and Co-Located Antennas.1. Dimensions: 9.63 inch by 10.07 inch by 5.48 inch2. Weight: 2 lbs3. Material: Aluminum4. Operating Temperature Range: minus 4 degrees F to plus 131 degrees F5. Compatible with TerraWave 501621, 527504, 572251, 568911, 333918, 393218,

544625, and 500885 antennas

16730-24

6. Mount hosts all Aruba 100, 200, and 300 series indoor access points, Aerohive's 121, 230, 330, and 390 access points, and Samsung's 303e and 403e access points

E. Part Number: TW-IBEAM-MNT-AP; IBeam Mounting Solution (AP) Low Profile I-Beam Warehouse Mounting Solution designed to allow mounting of an AP or AP and bubble enclosure to an I-Beam.1. Can be used Indoor or Outdoor2. Constructed of Corrosion Resistant 5052 Aluminum (Marine Grade)3. Includes I-Beam Clamps4. Can accommodate I-Beams from 3 inch-10 inch width5. Can be mounted vertically or horizontally6. 4 slots to accommodate wire/cable to secure the bracket to the I-beam should the I-

Beam clamps fail7. Can accommodate bubble enclosures, all paint can antennas, all patch antennas that

can use UNIV-ART-MOUNTT, and all screw mount omni antennas8. Includes hole pattern to accommodate Cisco Access Points9. Includes T-Bar to accommodate most other Access Points10. Pressed in corrosion resistant Stainless Steel Threaded Inserts for easy installation of

accessories

F. Part Number: TW-IBEAM-MNT-ENCL; IBeam Mounting Solution for enclosures is designed to allow mounting of a 12 inch by 10 inch by 4 inch, 12 inch by 10 inch by 6 inch, or a 14 inch by 12 inch by 6 inch polycarbonate enclosure to an I-Beam.1. Can be used Indoor or Outdoor2. Constructed of Corrosion Resistant 5052 Aluminum (Marine3. Grade)4. Includes I-Beam Clamps5. Can accommodate I-Beams from 3 inch-10 inch width6. Can be mounted vertically or horizontally7. 4 slots to accommodate wire/cable to secure the bracket to the I-beam should the I-

Beam clamps fail8. Can accommodate any 12 inch by 10 inch by 4, 12 inch by 10 inch by 6, and 14 inch

by 12 inch by 6 Polycarbonate Enclosures (Indoor or Outdoor), all paint can antennas (Indoor or Outdoor), all patch antennas that can use UNIV-ART-MOUNTT (Indoor or Outdoor), and all screw mount omni antennas (Indoor Only)

9. Pressed in corrosion resistant Stainless Steel Threaded Inserts for easy installation of accessories

G. Part Number: V-HWM-11113H-W; Horizontal Wall Mount With White Bubble Enclosure and hinged T-bar backplate is designed to provide optimal Wi-Fi coverage in high-ceiling structures.1. Size: 24 inch by 24 inch by 4 inch that slides easily into any 2 by 2 foot or 2 by 4 foot

ceiling tile grid.2. Constructed of powder-coated aluminum3. No moving parts significantly reduces failure rates4. AP mounted to enclosure back plate for additional security5. Fits most indoor APs with integrated antennas6. Weight: 4.5 lbs. without AP / 6 lbs. with AP7. 4 Keyholes for wall mounting8. Cutout for 1 gang Ethernet outlet9. Bubble:

a. Clearb. White

10. Compatible Access Pointsa. Cisco APsb. Aruba APs

16730-25

c. Meru APs

H. Part Number/Size: V-HWM-11113H-C; 12 inch by 8 inch by 4 inch Horizontal Wall Mount with Bubble Enclosure1. Constructed of powder-coated aluminum2. No moving parts3. AP mounted to enclosure back plate4. Fits most indoor APs with integrated antennas5. Weight: 4.5 lbs. without AP / 6 lbs. with AP6. 4 Keyholes for wall mounting7. Cutout for 1 gang Ethernet outlet8. Enclosure Type

a. Clearb. Whitec. MIrror

9. Compatible Access Pointsa. Cisco APsb. Aruba APsc. Meru APs

PART 3 EXECUTION

3.1 EXAMINATION

A. Do not begin installation until substrates have been properly prepared.

B. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

A. Clean surfaces thoroughly prior to installation.

B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

A. Install in accordance with manufacturer's instructions and in proper relationship with adjacent materials. Test units for proper operation.

3.4 PROTECTION

A. Protect installed products until completion of project.

B. Touch-up, repair or replace damaged products before Substantial Completion.

3.5 SCHEDULES

A. :

B. :

END OF SECTION

16730-26

Documents

· Web viewOffering an extensive line of products such as antennas, enclosures, cable, and solar-powered base stations that support these networks, Ventev Wireless Infrastructure