Water Treatment and Purification - Lenntech...192 191 159e 156c 156 151 152 266 187 291 293 252a 172 150 287a 502 273b 157 10/12 Printed from Grundfos Product Centre [2018.06.003]

GRUNDFOS DATA BOOKLET

CR64-4-2 A-F-A-E-HQQE 3x400/690 50 HZ Grundfos pump 96123534

Thank you for your interest in our products. Please contact us for more information, or visit our website

https://www.lenntech.com/grundfos/CRFAM/96123534/CR-64-4-2-A-F-A-E-HQQE.html

[email protected]. +31 152 610 900 fax. +31 152 616 289

BE > THINK > INNOVATE

Printed from Grundfos Product Centre [2018.06.003]

Position Qty. Description1 CR 64-4-2 A-F-A-E-HQQE

Product No.: On request

Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pumphead and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft sealensures high reliability, safe handling, and easy access and service. Power transmission is via a rigidsplit coupling. Pipe connection is via DIN flanges.

The pump is fitted with a 3-phase, fan-cooled asynchronous motor.

Further product detailsSteel, cast iron and aluminium components have an epoxy-based coating made in a cathodicelectro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical fieldaround the products ensures deposition of paint particles as a thin, well-controlled layer on the surface.An integral part of the process is a pretreatment. The entire process consists of these elements:1) Alkaline-based cleaning.2) Zinc phosphating.3) Cathodic electro-deposition.4) Curing to a dry film thickness 18-22 my m.The colour code for the finished product is NCS 9000/RAL 9005.

PumpA long split coupling connects the pump and motor shaft. It is enclosed in the motor stool by means oftwo coupling guards. The long coupling makes it possible to replace the shaft seal without removing themotor from the pump.

The motor stool connects the pump head and motor. The pump head has a combined 1/2" priming plugand vent screw.

The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system. This sealtype is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,this seal type is suitable for high-pressure applications. The cartridge construction also protects thepump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.Primary seal:

• Rotating seal ring material: silicon carbide (SiC)• Stationary seat material: silicon carbide (SiC)

This material pairing is used where higher corrosion resistance is required. The high hardness of thismaterial pairing offers good resistance against abrasive particles.Secondary seal material: EPDM (ethylene-propylene rubber)

1/12


Position Qty. DescriptionEPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The shaft seal is retained in the pump head by a cover and screws. It can be replaced without removingthe motor.

The chambers and impellers are made of stainless-steel sheet. The chambers are provided with aPTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surfaces, andthe shape of the blades ensure a high efficiency.

The base is made of cast iron. Both the inlet and the outlet side of the base have two pressure gaugetappings. The pump is secured to the foundation by four bolts through the base plate. The flanges arefastened to the base by means of locking rings.

MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.The motor is flange-mounted with free-hole flange (FF).Motor-mounting designation in accordance with IEC 60034-7: IM B 5 (Code I) / IM 3001 (Code II).Electrical tolerances comply with IEC 60034.The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082.The protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalledconditions.Thermal switches must be connected to an external control circuit in a way which ensures that theautomatic reset cannot cause accidents. The motors must be connected to a motor-protective circuitbreaker according to local regulations.The motor can be connected to a variable speed drive for adjustment of pump performance to any dutypoint. Grundfos CUE offers a range of variable speed drives. Please find more information in GrundfosProduct Center.

Technical data

Controls:Frequency converter: NONE

Liquid:Pumped liquid: WaterLiquid temperature range: -30 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³

Technical:Rated flow: 64 m³/hRated head: 74.7 mPump orientation: VerticalShaft seal arrangement: SingleCode for shaft seal: HQQEApprovals on nameplate: CE, EAC,ACSCurve tolerance: ISO9906:2012 3B

Materials:

2/12


Position Qty. DescriptionBase: Cast iron

EN 1563 EN-GJS-500-7ASTM A536 80-55-06

Impeller: Stainless steelEN 1.4301AISI 304

Bearing: SICSupport bearing: Graflon

Installation:Maximum ambient temperature: 60 °CMaximum operating pressure: 16 barMax pressure at stated temp: 16 bar / 120 °C

16 bar / -30 °CType of connection: DINSize of inlet connection: DN 100Size of outlet connection: DN 100Pressure rating for pipe connection: PN 16Flange size for motor: FF300

Electrical data:Motor standard: IECMotor type: 160LBIE Efficiency class: IE3Rated power - P2: 18.5 kWPower (P2) required by pump: 18.5 kWMains frequency: 50 HzRated voltage: 3 x 380-415D/660-690Y VRated current: 34,5-32,5/20,0-18,8 AStarting current: 830-980 %Cos phi - power factor: 0.89-0.85Rated speed: 2940-2950 rpmEfficiency: IE3 92,4%Motor efficiency at full load: 92.4-92.4 %Motor efficiency at 3/4 load: 93.2 %Motor efficiency at 1/2 load: 93.2 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): F

Others:Minimum efficiency index, MEI ≥: 0.7Net weight: 196 kgGross weight: 229 kgShipping volume: 0.495 m³Danish VVS No.: 385908042

3/12


On request CR 64-4-2 A-F-A-E-HQQE 50 HzH

[m]

0

10

20

30

40

50

60

70

80

90

100

110

Q [m³/h]0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85

eta[%]

0

20

40

60

80

100

CR 64-4-2, 3*400 V, 50Hz

P[kW]

0

5

10

15

20

NPSH[m]

0

5

10

15

20P1

P2

4/12


H[m]

0

10

20

30

40

50

60

70

80

90

100

110

Q [m³/h]0 10 20 30 40 50 60 70

eta[%]

0

20

40

60

80

100

CR 64-4-2, 3*400 V, 50Hz

P[kW]

0

5

10

15

20

NPSH[m]

0

5

10

15

20P1

P2

248365

515

919

G 1/2 G 1/2

4 X G 1/2

204

140

190 100x 144

x 188

45

350

314

266331

220

180

L3L2L1

+T +T+T

TO AMPLIFIERRELAY

IEC

TP2

11 T

HER

MAL

LY P

RO

TEC

TED

WH

EN T

HE

THER

MIS

TOR

S AR

EC

ON

NEC

TED

TO

AM

PLIF

IER

REL

AY F

OR

CO

NTR

OL

OF

MAI

N S

UPP

LYTH

ERM

ISTO

RS

PTC

AC

CO

RD

ING

TO

DIN

440

82

TO AMPLIFIERRELAY

+T +T+T

L1 L2 L3

Description ValueGeneral information:Product name: CR 64-4-2 A-F-A-E-HQQEProduct No: On requestEAN number: On requestTechnical:Rated flow: 64 m³/hRated head: 74.7 mStages: 4Impellers: 4

Number of reduced-diameter impellers: 2

Low NPSH: NPump orientation: VerticalShaft seal arrangement: SingleCode for shaft seal: HQQEApprovals on nameplate: CE, EAC,ACSCurve tolerance: ISO9906:2012 3BPump version: AModel: BMaterials:Base: Cast iron

EN 1563 EN-GJS-500-7ASTM A536 80-55-06

Impeller: Stainless steelEN 1.4301AISI 304

Material code: ACode for rubber: EBearing: SICSupport bearing: GraflonInstallation:Maximum ambient temperature: 60 °CMaximum operating pressure: 16 barMax pressure at stated temp: 16 bar / 120 °C

16 bar / -30 °CType of connection: DINSize of inlet connection: DN 100Size of outlet connection: DN 100Pressure rating for pipe connection: PN 16Flange size for motor: FF300Connect code: FLiquid:Pumped liquid: WaterLiquid temperature range: -30 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³Electrical data:Motor standard: IECMotor type: 160LBIE Efficiency class: IE3Rated power - P2: 18.5 kWPower (P2) required by pump: 18.5 kWMains frequency: 50 HzRated voltage: 3 x 380-415D/660-690Y VRated current: 34,5-32,5/20,0-18,8 AStarting current: 830-980 %Cos phi - power factor: 0.89-0.85Rated speed: 2940-2950 rpmEfficiency: IE3 92,4%Motor efficiency at full load: 92.4-92.4 %Motor efficiency at 3/4 load: 93.2 %Motor efficiency at 1/2 load: 93.2 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/Jetting

248365

G 1/2G 1/2

4 X G 1/2

204

190100

x144

x188

350

314

266331

5/12


Description ValueInsulation class (IEC 85): FMotor protec: PTCMotor No: 85U17528Controls:Frequency converter: NONEOthers:Minimum efficiency index, MEI ≥: 0.7Net weight: 196 kgGross weight: 229 kgShipping volume: 0.495 m³Danish VVS No.: 385908042

6/12


On request CR 64-4-2 A-F-A-E-HQQE 50 Hz

Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

248

365

515 919

G 1

/2G

1/2

4 X

G 1

/2

204

140

190

100

x14

4

x18

8

45

350

314

266

331

220180

7/12


Exploded view

301a

219

92

7

7a

77

301a

92

11

9

51

100

49

105

45

215a

215

18

217215a

534a534

531531a

28

17

251d

251a

6

11b

66a

67

530530a

8/12


Sectional drawing (TM058200 for TPE2,TPE3)

4

2 13

5

TM058200

9/12


Exploded view ( TM057026 for MGE model H/I )

251d

251b

290

287277a

286

277

273a

273

268268a289a289

288b288288a

251a

252b

156c

159d

156b

156d188

275a

153

154

158

178

185

192

191

159e

156c 156

151152

266

187

291

293

252a

172

150

287a

502

273b

157

10/12


Parts list CR 64-4-2, Product No. On requestValid from 2.4.2011 (1113)

Pos Description Annotation Données de classification Référence Quantité Unité+ Motor 1 pcs- 1 Basic unit 1 pcs- 2a Pump head cpl. 1

2 Pump head 19 Hex socket head cap screw Designation: DIN 912 4

Length (mm): 25Thread: M10

- 18 Air vent screw 1PlugSpindle

23 Plug 137 O-ring 158 Cover 160 Spring 4100 O-ring Diameter: 16,3 2

Material type: EPDMThickness: 2,4

- 6b Base cpl. Rubber type: EPDM 1Bearing ring, stationary 1

6 Base 125 Plug 431 Hex socket head cap screw 132 Washer Designation: DIN 125A 1

Internal diameter: 6,4Outer diameter: 12,0Thickness: 1,6

37 O-ring 138 O-ring Diameter: 16,3 4


26 Staybolt Length (mm): 496 4Thread: M16

36 Hex nut Thread: M16 455 Outer sleeve Outer diameter: 216,0 1

Length (mm): 353,566a Washer Designation: DIN 125 A 4

Internal diameter: 17Outer diameter: 30Thickness: 3

- 1a Motor stool cpl. 1 pcs1a Motor stool 17 Coupling guard 27a Socket button head screw 4

- 8 Coupling cpl. Dimension: 22/42 19 Hex socket head cap screw Designation: DIN 912 4


10a Coupling half 228 Hex socket head cap screw Designation: DIN 912 4


28.a Hex head screw 432.a Washer Designation: DIN 125 A 8

Internal diameter: 17Outer diameter: 30Thickness: 3

36 Hex nut Thread: M16 4- 76 Nameplate set 1 pcs

76 Plate 1

11/12


Pos Description Annotation Données de classification Référence Quantité Unité76a Rivet 2

- 105 Shaft seal Material type: HQQE 1 pcsAdjusting fork 1

109 O-ring 1110 O-ring Diameter: 21,5 1


- 200 Flange cpl. 2 pcs201 Flange Diameter: DN 100 1

Pressure: PN 16203 Lock ring 1

12/12

Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

[email protected]://www.lenntech.comtel. +31 152 610 900 fax. +31 152 616 289

Documents

Water Treatment and Purification - Lenntech...192 191 159e 156c 156 151 152 266 187 291 293 252a 172 150 287a 502 273b 157 10/12 Printed from Grundfos Product Centre [2018.06.003]