WAREMA climatronic® WebControl - solskjermingsgruppen.no

WAREMA climatronic® WebControl

Manual

(Keep for future use)

Valid from 01 December 20152011980_d

Sun. Light. WAREMA.

Photo

: H

aberm

aass G

mbH

2011980_d•en•2015-12-01We reserve the right to make technical changes2


General informationThe publication of this document supersedes all previous corresponding doc-umentation. We reserve the right to make changes in the interest of technical progress. Particular care was taken in producing the text and graphics in this documentation. In spite of this, we cannot accept liability for any existing er-rors or the consequences thereof.

Legal information

� Operating instructions, manuals and software are protected by copyright.

� All rights to the software are specified in the license agreement included.

� WAREMA climatronic® is a registered trademark of WAREMA Renkhoff SE.

� WAREMA and the WAREMA logo are trademarks of WAREMA Renkhoff SE.

� All other brand or product names included in this document are trademarks or registered trademarks of their respective owners.

ContactCustomer Center Control SystemsSales, order processing and applied engineering for the following sales re-gions:

North (Hamburg, Hannover)Tel. +49 9391 20-3760 • Fax [email protected]

East (Berlin, Limbach-Oberfrohna, Dresden)Tel. +49 9391 20-3770 • Fax [email protected]

West (Düsseldorf, Hagen, Cologne)Tel. +49 9391 20-3750 • Fax [email protected]

Central (Frankfurt, Gießen, Marktheidenfeld)Tel. +49 9391 20-3750 • Fax [email protected]

South (Nuremberg, Munich)Tel. +49 9391 20-3780 • Fax [email protected]

Southwest (Karlsruhe, Stuttgart, Villingen, Freiburg)Tel. +49 9391 20-3780 • Fax [email protected]

InternationalTel. +49 9391 20-3740 • Fax [email protected]

Control Systems Helpline

Tel. +49 9391 20-6760 • Fax [email protected]

Building system technology sales

Dillberg 33, 97828 MarktheidenfeldTel. +49 9391 20-3720 • Fax -3719

© 2015, WAREMA Renkhoff SE

2011980_d•en•2015-12-01 We reserve the right to make technical changes 3

Contents

1 Safety instructions ........................................................................................... 4

1.1 Meanings of symbols and pictographs ...........................................................4

1.2 Intended use .........................................................................................................4

1.3 Target group .........................................................................................................5

1.4 Additional documents ..........................................................................................5

1.5 Tested browsers ....................................................................................................5

2 Introduction ...................................................................................................... 6

2.1 Functions ................................................................................................................6

2.2 Scope of delivery ..................................................................................................6

2.3 Connection diagram .............................................................................................6

2.4 Wiring diagram ......................................................................................................7

2.5 Connections and LEDs ........................................................................................8

3 User interfaces ................................................................................................. 9

3.1 Dynamic interfaces ...............................................................................................9

3.2 Configuration menu ........................................................................................... 10

3.3 Operation menu ................................................................................................. 11

3.4 System menu ...................................................................................................... 12

4 Commissioning .............................................................................................. 13

4.1 USB / RS 485 port ............................................................................................ 13

4.2 Access through a browser ............................................................................... 13

4.3 Password use ..................................................................................................... 15

4.4 Creating and editing rooms ............................................................................. 164.4.1 Assigning channels/groups/scenes to a room ..................................... 174.4.2 Copying channels/groups/scenes to an existing room ....................... 184.4.3 Manual synchronisation .............................................................................. 19

5 Operation of channels, groups, scenes ....................................................... 20

5.1 Operating channels and groups ..................................................................... 20

5.2 Operating scenes............................................................................................... 21

6 Settings ........................................................................................................... 23

7 System ............................................................................................................ 25

7.1 SD memory card ................................................................................................ 257.1.1 Loading firmware updates ......................................................................... 25

7.2 Resetting the device to the factory settings .................................................. 26

8 DHCP disabled ............................................................................................... 27

9 External access to WAREMA climatronic® WebControl via the Internet .. 28

9.1 What is VPN? ...................................................................................................... 28

10 Connecting with the WAREMA climatronic® WebControl App .................. 29

11 Technical data ................................................................................................ 30

12 Troubleshooting ............................................................................................. 31

Table of contents



1 Safety instructionsWe have developed and tested the WAREMA products and this software in compliance with basic safety requirements.Residual risks nevertheless remain!

For this reason, please read this manual before commissioning and operat-ing the controls.

It is very important that you adhere to the safety instructions listed in this section and the warning information contained in this manual. Failure to do so will void any warranty claims against the manufacturer.

Keep this manual for future use.

WARRNRN The electrical installation must be performed by a certified electrician in accordance with the electrical installation regulations published by the Association of German Electrical Engineers (VDE 0100) or the standards and legal requirements of the country in which the device is being installed. The electrician must observe the installation instructions included with the electrical devices.

1.1 Meanings of symbols and pictographs

The safety information contained in these instructions is marked with warning symbols.

CAATNIR Reminder to be careful. Failure to comply may result in property damage.

NOTE The term NOTE designates important information and helpful tips.

The square indicates an instruction or a prompt for action. Perform the de-scribed step.

� The triangle denotes an event or the result of a preceding action.

� The black triangle is a bullet point for lists or selections.

1.2 Nntended use WAREMA climatronic® WebControl allows you to control different devices, such as sun shading products, lighting, HVAC equipment and window drives, using the channels on your existing WAREMA climatronic® control system.

Safetyinstructions


1.3 Target group These instructions are intended for persons who wish to operate their sun shading products using an app or browser.

1.4 Additional documentsThese instructions provide all of the information necessary to configure the WAREMA climatronic® WebControl. The following documents are available in addition to these instructions:

Document Number

WAREMA climatronic® 2.0 installation instructions 2003 869

WAREMA climatronic® 2.0 operation instructions 2003 868

WAREMA climatronic® studio software 890 674

1.5 Tested browsers

Browsers:

� Internet Explorer 11

� Firefox 35

� Google Chrome 40

� Safari 8

Rotes



2 NntroductionWith the WAREMA climatronic® WebControl, you can comfortably operate your sun shading system from home on your own WLAN network using your web browser or mobile devices (laptops, smartphones, tablets).

An app is available for Android devices. Users can operate other smartphone operating systems, such as iOS devic-es, using browsers.

NOTE Up to three browsers can connect to the WebControl at one time.

2.1 FunctionsYou can create up to 64 rooms and assign custom names. You can also copy channels and scenes and save them to selected rooms (maximum of 10 entries per room, i.e. channels, groups or scenes). The project data is stored directly on the device.

With the WAREMA climatronic® control panel, you can edit

� 1-64 channels

� 1-64 groups

� 1-16 scenes

� Control modes and

� absent mode can be completely switched on or off.

An SD card slot allows you to create a backup copy of the project and up-load a firmware update (Chapter 7.1.1 on page 25).

2.2 Scope of delivery

Fig. 1 WAREMA climatronic® WebControl and included LAN cable for the LAN con-

nection between WAREMA climatronic® WebControl and the WLAN router.

2.3 Connection diagram

power supply unit24V DC 2,5A

climabus

LAN (network)

controlbus

WLAN

230 V/AC

WAREMA climatronic® switch actuators

climatronic

WebControl®

Fig. 2 Connecting WAREMA climatronic® WebControl

Nntroduction


The WAREMA climatronic® WebControl is connected to the WAREMA cli-matronic® control panel via the controlbus. Power must be supplied to the WAREMA climatronic® WebControl from the WAREMA climatronic® power supply unit.

The WAREMA climatronic® WebControl is also connected to your existing configured router via the included LAN cable. (One WAREMA climatronic® WebControl can be connected per router.)

"DHCP" must be enabled on the router in order for the IP address to be as-signed automatically. If this is not possible, please read the information pro-vided under "DHCP" (Chapter 8 on page 27).

The second connection on your control panel is where the climabus and its switch actuators and sensors are located.

The router uses the LAN to communicate with the PC or laptop and the WLAN to communicate with mobile devices such as tablets or smartphones.

2.4 Wiring diagram

X5 X6

JY(St)Y 4x2x0.8 mm ∅

Bus A

Bus B

0 V

24 V DC to other

bus devices

climabus

Bus A

Bus B

controlbus

terminating resistance120Ω

120Ω per terminating restistance

Ethernet

max. line length 200 m

X7

WH

YE

RD

BK

OG

BU

WH

YE

OG

BU

Fig. 3 Wiring diagram

Nntroduction



2.5 Connections and LEDs

�

�

�

�

�

��


� �

Fig. 4 Connections and LEDs on the WAREMA climatronic® WebControl (front, bottom)

Pos. Function

Mode buttonResets device to the factory settings (see 7.2 on page 26)

Reset buttonShort press (< 1 s): restarts device (power reset)Long press (> 5 s): loads firmware (see Chapter 7.1.1 on page 25).

Status LEDLights up briefly in orange after switching on, then red.LED shines steady red: IP address not acquired, no router connection LED shines steady green: IP address acquired, project availableLED flashes green: IP address acquired, no project loaded yet.

controlbus LED

Shines or flashes to indicate communication between the WAREMA clima-tronic® and the WAREMA climatronic® WebControl.

SD card slotStorage option for backup copies of the project and loading projects and firmware/application updates (see Chapter 7.1.1 on page 25).

control bus connection

The WAREMA climatronic® WebControl is connected to the WAREMA clima-tronic® via the orange/blue terminals.

A 120 Ω terminating resistor is premounted between the terminals.

climabus connectionThe power supply is connected using the yellow/white terminals.

RJ45 socket, yellow LED

Flashes when there is data traffic between the WAREMA climatronic® Web-Control and the IP router.

RJ45 socket, green LEDRemains lit when the physical connection between the WAREMA climatronic® WebControl and the IP router is functional.

NOTE If an IP address is not assigned after 1 min., the status LED flashes red. To acquire an IP address in this case, see Chapter 8 on page 27.

Nntroduction


3 Aser interfaces

3.1 Dynamic interfacesDepending on which format you use for displaying your WAREMA climatron-ic® WebControl (tablet, PC or smartphone), you will automatically be provid-ed with different interfaces. The positioning of the user interfaces is adjusted accordingly. As a result of the different views, these interfaces may have a slightly different appearance than the images contained in this manual. Our images show a laptop view.

Below are two other examples of view sizes on Android devices:

Fig. 5 User interface on a tablet Fig. 6 User interface on a smartphone

NOTE The illustrated product positions do not correspond to their actual positions.

Aser interfaces



3.2 Configuration menu

①②

③

⑤

⑥ ⑦

④

⑧ ⑨

Fig. 7 Interface of the WAREMA climatronic® WebControl, Configuration menu

➊ Change password➋ Synchronise*➌ Create rooms➍ Manage channels, groups and scenes➎ Edit rooms ( icon: assign names or rename icon: delete rooms, icon: copy rooms)➏ Assign channels, groups and scenes ➐ Activated list symbol: move channels / groups / scenes using drag

and drop➑ Create rooms➒ Activated list symbol: move rooms using drag and drop

NOTE *The "Synchronise" button only works "in one direction", i.e. you can only synchronise the WAREMA climatronic® WebControl with your WAREMA climatronic® control panel, but not the other way round. Rooms etc. that you have created in your app/browser can NOT be transferred to the control pan-el by pressing "Synchronise".

Aser interfaces


3.3 Iperation menu

① ②

③

④

⑤

⑥

⑦ ⑧ ⑨

⑩

Fig. 8 Interface of the WAREMA climatronic® WebControl, Operation menu

➊ Selection of rooms➋ Selection of channels, groups and scenes➌ Slider for changing the inclination angle of slat products (e.g. external venetian blinds)➍ The grey degrees value indicates a possible inclination angle of the sun shading product.➎ Slider for changing the position of sun shading products ➏ The white percentage value indicates the new setpoint position of the

sun shading product➐ Up button moves the sun shading product upwards/inwards➑ Stop button stops the movement➒ Down button moves the sun shading product downwards/outwards➓ Start button moves the sun shading product after the position is

changed using one of the sliders.

Aser interfaces



3.4 System menu

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑪ ⑩

Fig. 9 Interface of the WAREMA climatronic® WebControl, System menu

Display of:➊ DHCP "ON" (default) or "OFF" (see Chapter 8 on page 27)➋ IP address (assigned to the WAREMA climatronic® WebControl by the router) in DHCP➌ Subnet (assigned to the WAREMA climatronic® WebControl by the router) in DHCP➍ Gateway (assigned to the WAREMA climatronic® WebControl by the router) in DHCP➎ Project name (the name of the project is always "Projekt.bin")➏ Software version of the application (menu display in browser)➐ Firmware version➑ Bootloader version➒ Drop-down list for language selection (de, en)➓ Saves project on SD card⓫ Loads project from SD card

Aser interfaces


4 CommissioningBefore you commission the WAREMA climatronic® WebControl, you will need to have an existing project on your WAREMA climatronic® system. Follow the instructions provided here to complete the commissioning process. Use the Wizard, which guides you through the menu, or the comfortable WAREMA climatronic studio software.

4.1 ASB / RS 485 port

There are two types of ports on your WAREMA climatronic® control panel: in the WAREMA climatronic® menu illustrated below, you can choose to enable the USB port on the left side of the control panel or, alternatively, the RS 485 port on the back of the panel:

Fig. 10 WAREMA climatronic® menu for selecting the correct port type

To enable use of the WAREMA climatronic® WebControl, the RS485 port on the back of the WAREMA climatronic® control panel must be selected.(The USB port is required for connecting a PC with the WAREMA climatronic® studio and is not needed in this case).

4.2 Access through a browser

You can commission the WAREMA climatronic® WebControl using your browser or the free app (see Chapter 10 on page 29).

The following description illustrates how to commission the WebControl from a laptop using a browser.

Once you have connected the WAREMA climatronic® WebControl, open your browser.If you are using a PC operating system, type "http://webcontrol-c" in your browser's address bar.If you are using a MAC operating system, type "webcontrol-c.local" in the ad-dress bar.The screen interface jumps to the "Operation" menu item.

Commissioning



NOTE If this procedure cannot be successfully completed on your smartphone and/or PC, the web address of the WAREMA climatronic® WebControl was not recognised by your router. In this case, open the DHCP client list of your IP router (using your router manual). It contains the IP addresses associated with the WAREMA climatronic® WebControl (it will look something like this: 192.168.178.20). Then enter the number in the address bar of your browser.

Fig. 11 Start window for the WAREMA climatronic® WebControl

NOTE Another method of determining the access data for your router is to use oth-er software programs, such as the free "FING" app. After you download this app, you can use it to search your network for users. Your WAREMA clima-tronic® WebControl is listed under the name "Microchip Technology". This will help you quickly find the required IP address.

Fig. 12 "Fing" shows the IP address of the WAREMA climatronic® WebControl (Micro-chip Technology); view on an Android mobile (l) and iOS smartphone (r).

Commissioning


4.3 Password useBecause a project does not yet exist when you access the system for the first time, you will need to click on the "Configuration" menu.

You will then be prompted to enter a password. For initial access, please use the following preset password:

5858You can change the password at any time. To do so, click the "Change pass-word" button in the "Configuration" menu. You can assign a browser pass-word with up a maximum of 10 characters. Please remember the password you have assigned.

NOTE ONLY use letters and numbers for your password; do NOT use special char-acters.

Fig. 13 Changing the password

NOTE If the system is not used for > 1 hour, the assigned password must be en-tered again.

NOTE Assigning a password is not mandatory. If you do not wish to use a pass-word, leave the password field blank and click the "Accept" button.

Commissioning



4.4 Creating and editing rooms

To create rooms, click the "+" button next to "Room".A window appears in which you can enter the name of your room (for exam-ple, "Kitchen").

Click "Create".

� The room is then created and appears in the left column of the menu.

Fig. 14 Creating roomsThe room "Kitchen" now appears in orange, which means that is selected. When a room is selected, you can edit it using the icon. For example, you can change the name. The icon can be used to delete the room.To create another room, click the next to the . A new room is created.The icon activates a mode in which the created rooms can be moved.To rearrange the rooms, move the mouse onto the corresponding room in the list view and press and hold the left mouse button to drag and drop the room into the desired location.

Fig. 15 Moving rooms using drag and drop

NOTE A newly created scene (Kitchen scene 1) will be displayed in the menu. The orange line always denotes a scene.

Commissioning


4.4.1 Assigning channels/groups/scenes to a room

For the room that you created and highlighted in orange in the overview, you can then assign different preset channels provided by the WAREMA clima-tronic® (for sun shading products such as roller shutters, external venetian blinds, etc., but also for light).

Fig. 16 Assigning channels

To assign a channel, click the "+" button next to "Channel/Group/Scene" in the right column of the overview.

� A window then appears as illustrated in Fig. 16.

Select what you wish to assign and click "Create".

� The selected channel is copied to the room in which you are currently locat-ed on the left side (in orange font).

Commissioning



4.4.2 Copying channels/groups/scenes to an existing room

On the right side, click a channel, group or scene.

� The channel is now highlighted orange, and the and icons, which you are already familiar with form the room creation menu, will appear.

Click the icon.

All the room names on the left side now also have an icon.

� The highlighted channel will then be copied to the room that you click.

The icon activates a mode in which you can move channels that have been created. The process here is same as for moving rooms (see also Fig. 15).Select the room you would like to edit by clicking on it.To move a channel, move the mouse onto the corresponding channel in the list view and press and hold the left mouse button to drag and drop the channel into the desired location.

NOTE The configuration you have created (kitchen, roller shutter...) will appear in the app on your Android device and on the "Operation" page of your browser the next time you open either one.

The commissioning process is now complete.

NOTE We recommend saving the project created in your WAREMA climatronic® WebControl on an SD card once you have successfully completed the com-missioning process (see Chapter 7.1 on page 25).

Commissioning


4.4.3 Manual synchronisationIf you wish to make subsequent changes on the WAREMA climatronic® con-trol panel, you will need to then synchronise these changes with the WARE-MA climatronic® WebControl.

To do this, go to the "Configuration" menu and press the "Synchronisation" button. This loads the current designations from the WAREMA climatronic® control panel and updates the corresponding text in the user interface.

NOTE Synchronisation only ever occurs in one direction: from the WAREMA clima-tronic® control panel to the WAREMA climatronic® WebControl.

NOTE Theoretically, it is possible to manually operate the WAREMA climatronic® control panel and the WAREMA climatronic® WebControl simultaneously. In this case, however, the latter of the two actions will have priority.

NOTE If a channel, group or scene is deleted on the WAREMA climatronic® control panel, the WAREMA climatronic® WebControl will recognise this after manual synchronisation and indicate it by displaying an "!" in a red warning triangle next to the WAREMA logo (in the "Configuration" menu and in the "Operation" menu). Clicking on the "!" opens a window displaying the deleted items.

These channels should be deleted in the "Configuration" menu so that the WAREMA climatronic® WebControl does not erroneously continue to display them (since they no longer have any function).

Fig. 17 Info symbol appears at top left

The Info window displays a list and allows you to also delete those objects from the WAREMA climatronic® WebControl which have already been deleted on the WAREMA climatronic® control panel ("Configuration" menu).

Commissioning



5 Iperation of channels, groups, scenes

5.1 Iperating channels and groups

NOTE The channels, groups or scenes used are read from the WAREMA climatron-ic® and have the same designations as they do on the control panel. On the WAREMA climatronic® WebControl, you can also create rooms and assign descriptive names to them (for example, Kitchen, Living Room, Chil-dren's Room 1 or 2), which makes assigning channels, groups and scenes a clear and easy process.

To use this functionality, open your browser. If you are using a PC operating system, type "http://webcontrol-c" in your browser's address bar. If you are using iOS/OS X, enter "webcontrol-c.local". (See also Chapter 4.2 on page 13).

Fig. 18 Menu for operating the channels

Then switch to the "Operation" menu.

Choose a room (left column) and channel (right column) by highlighting the desired selections.

� In this case, an example for a possible position of your channel (here, for instance, Kitchen, External venetian blind kitchen) is shown shaded in grey in the right column.

To change the position of the unit (roller shutter, external venetian blind, ...), for example by lowering it, drag the slider to the desired setpoint position while keeping the mouse button pressed.

� The desired position you set is displayed as a percentage in white. This per-centage shows you the new setpoint position.

Press the "" symbol for "play" and start the process. The " " stop button allows you to stop the product's movement at any time, even before the prod-uct reaches the defined position.

� The spinning wheel indicates that the selected channel is moving, and that the move command is being sent to the WAREMA climatronic® (the product's movement time is not visible in the display).

Iperation


� The controlbus LED on the WAREMA climatronic® WebControl flashes green, indicating that the information is being sent.

NOTE With external venetian blinds, you also have the option of adjusting the incli-nation angle of the slats using the left slider. The procedure here is the same.

Alternatively, you can also operate your product manually. To do so, press the Up , stop ■or down button.

� A brief push of the button (shorter than approx. 0.6 seconds) triggers a tilting impulse for the slats (on products without slats, movement begins immediately).

� A longer push of the button (longer than approx. 0.6 seconds) triggers a movement.

The graphic display does NOT show the actual product position. Therefore, when you tilt up the inclination angle slightly by pressing the button, the display on the WAREMA climatronic® WebControl jumps all the way to the top. However, this does not mean that your external venetian blind has been tilted up completely; it merely indicates the direction of the action.

5.2 Iperating scenesSwitch to the "Operation" menu.

On the left, click the room for which you created the scene (Kitchen) and se-lect the scene on the right (Kitchen scene 1).

Fig. 19 The newly created scene is displayed in the "Operation" menu.

Iperation



Fig. 20 "Operation" menu, scene display

You can then operate your channels through the scene by clicking the "" button to "play".

NOTE If you would like to use your scene to move products into a position other than the one predetermined by the WAREMA climatronic®, you must first teach the system how to react to the scene.

Using your control panel, move the channels created in the scene into the desired position.

Then press the "●" button ("Record") and confirm the action.

Fig. 21 Confirming a new scene to be learned in

� The new position will then be learned-in through the scene and saved on the WAREMA climatronic®.

Iperation


6 SettingsThe "control modes" (only the comfort control modes, as this does not apply to safety control modes) can be switched ON and OFF using the slider for the complete WAREMA climatronic® system.

The "Absent" function can also be switched ON or OFF.This activates or deactivates the "Absent" settings configured on the WAREMA climatronic®.

Fig. 22 Using the slider, you can switch the comfort control modes or the "Absent" function on and off.

Settings



The safety control modes, which are familiar to you from the WAREMA climatronic® and which are activated there, are displayed in the menu line of the WAREMA climatronic® WebControl as follows:

Fig. 23 The overview shows all possible alarm and notification symbols.

Alarm: Symbol:Col-our:

Description:

Wind red

► The channel cannot be operated because a wind alarm is active.

► The connected weather station/sensor is not sending signals. For safety reasons, the movement of the sun shading product will be blocked until the source of the error has been eliminated ("heartbeat" function).

Precipitation redThe channel cannot be operated because a precipitation alarm is active.

Ice redThe channel cannot be operated because an ice alarm is active.

Building control system red

The channel cannot be operated because a (central) move command is being carried out by the

WAREMA climatronic®.

Settings


7 SystemThe menu bar of your WAREMA climatronic® WebControl includes another important menu item.Click the "System" button to obtain information about the status of your sys-tem.

Fig. 24 Status information under the "System" menu item.

7.1 SD memory cardUsing a standard SD memory card, you can perform the following tasks in this menu:

� Load a project you have previously created on the WAREMA climatronic® WebControl and saved on the SD card by pressing the "Load" button

� Conveniently store a backup copy of the project you created on an SD mem-ory card by pressing the "Save" button.

NOTE Only one project file, which always has the same project name (Projekt.bin), may be stored on the SD memory card at any given time. The saved file will always contain the latest project status.

NOTE The SD memory card must be formatted to FAT32.

7.1.1 Loading firmware updates

NOTE BEFORE loading a new firmware update, make sure that your current project is saved on both the SD card and in another location, for example, on a PC.

NOTE BEFORE loading a new firmware update, check the current firmware version of your WAREMA climatronic® WebControl by comparing the version indicat-ed in the "System" menu with the updates available in the downloads area of the WAREMA website.

Download the current firmware update from the website onto the SD card which contains your saved project.

Insert the SD card into the card slot and then reset the WebControl by using a pointed object (e.g. paper clip) to perform a long press (> 5 s) of the reset button next to the SD card slot.

System




Fig. 25 Reset button for loading the firmware

� The status LED briefly lights up orange and then alternates between flashing red and green.

� Both LEDs remain completely off for a short period.

� The status LED shines red until the website is loaded.The status LED and controlbus LED alternatingly flash green (back and forth). The status LED thus indicates that no project is available yet, and the controlbus LED thereby indicates that communication is normal.

� The status LED shines steady green once the update has been successfully completed. The previously saved project file has been loaded into the WAREMA clima-tronic® WebControl from the SD card.

NOTE If the status LED flashes green, the project was not previously saved on the SD card and was deleted from the WAREMA climatronic® WebControl. The factory settings of the device have been restored.

7.2 Resetting the device to the factory settings

Press and hold the Mode button (= resetting the device to factory settings).

� The status LED slowly flashes red.

� After approx. 10 s, the status LED rapidly flashes red.

You can then release the push button, and the device will be reset to the fac-tory settings.

NOTE When you reset the device to the factory settings, all data is deleted.

System


8 DHCP disabledIf the router is configured in such a way that IP addresses are not assigned automatically (DHCP = OFF), you must specify an IP address for the WARE-MA climatronic®.

Procedure:

1. Create a text file with the name "ip_info" and the extension ".txt"

2. Create the file using the following example (data content is framed):

File contents Definition

OFF ◄ DHCP mode

I192.168.1.25 ◄ IP address

S255.255.255.0 ◄ Subnet mask

G192.168.1.1 ◄ Standard gateway

D192.168.1.1 ◄ DNS server

NOTE Make sure that the IP address you assign lies within the router's subnet mask.

3. Save this file on an SD card.

4. Insert the SD card into the SD slot on the WAREMA climatronic® WebControl and briefly press the Reset button (< 1 s results in an interruption of the power supply).

5. Communication with the router is now ensured and you can continue the commissioning process in Chapter 4.2.

NOTE If you wish to enable DHCP again, the first line of the file (DHCP mode) must read "ON".

Create the file as described below:

Procedure:

1. Create a text file with the name "ip_info" and the extension ".txt"

2. Create the file using the following example (data content is framed):

File contents Definition

ON ◄ DHCP mode

3. Save this file on an SD card.

4. Insert the SD card into the SD slot of the WMS WebControl before connect-ing the USB cable.

5. Briefly press the Reset button (< 1 s).

6. WAREMA climatronic® WebControl automatically receives an IP address from your router ("DHCP" must be enabled).

DHCP disabled



9 External access to WAREMA climatronic® WebControl via the Nnternet

WMS devices can only be operated on the home network. Access via the Internet is not supported by WAREMA climatronic® WebControl. However, access is possible using appropriate routers via VPN (e.g. Fritz!Box by AVM: www.avm.de).

9.1 What is VPR?VPN access (VPN = Virtual Private Network) authorises the mobile device to access the local network from the Internet.

Advantages of VPN:

� Only authorised users have access to the local network. � All data are encrypted. � The data are neither modified, recorded nor diverted during transmission.

Requirements to establish a VPN connection: � Internet connection. � The mobile device and the router have been prepared for a VPN connec-

tion (i.e. VPN client has been installed).

CAATNIR Danger of property damage from unauthorised access to installation. For this connection, only use a VPN access with secure encryption for

all data packets.

The necessary hardware (VPN router) and the solutions offered by mobile network providers differ by country or region in terms of the set-tings and technical possibilities.

Always have a specialised VPN service provider install and start up the VPN access. WAREMA cannot be held liable for performance problems and incompati-bilities caused by applications, services or devices from third parties. WAREMA does not provide technical support in setting up a VPN access.

External access


WAREMA climatronic® WebControl app

10 Connecting with the WAREMA climatronic® WebControl App

Download the WAREMA app named " climatronic WebControl" from the the store for your system (App Store for Apple, Google Play Store for Android) and open it.

� Google Play Store: climatronic® Android-App: http://www.warema.de/web-control-c-android

� App Store: climatronic® iOS-App: http://www.warema.de/webcontrol-c-ios.

NOTE If the WAREMA climatronic® WebControl cannot be found, please refer to the Troubleshooting section in Chapter 12 on page 31.

The App automatically opens to the "Operation" screen.Here you will see your project's rooms, channels and scenes.

Fig. 26 Display of the rooms and channels in the app (shown using the example of an Android device)

You can now conveniently operate all of the created channels from your smartphone/tablet.The fastest way to obtain the app is using the QR code shown here

Apple Android

This procedure is the same as the one described in Chapter 5 on page 20 ff.


WAREMA climatronic® WebControlTechnical data

11 Technical dataWAREMA climatronic® WebControl Min. Typ. Max. Unit

Supply (terminal x2)

Operating voltage (SELV) 20 24 28 V DC

Current 40 mA

Enclosure

WAREMA climatronic® WebControl (L×W×H in mm)

95 × 54 × 60 (see Fig. 28)

Degree of protection IP30

Safety class III

Connection

controlbus (terminal x1) Spring terminals 0.6...0.8 mm ∅

controlbus line length 200 m

Ethernet RJ45 plug-in connector

Ethernet transfer rate 10/100 Mbit/s

Miscellaneous

Software class A

Location of use Clean ambient conditions

Conformity

available at www.warema.com

Ambient conditions

Operating temperature 0 20 40 °C

Storage temperature 0 20 50 °C

Rel. humidity (not condensing)

10 40 85 %Frel

Article numbers

WAREMA climatronic® WebControl REG 2006 861

WAREMA Renkhoff SEHans-Wilhelm-Renkhoff-Strasse 297828 Marktheidenfeld

60 m

m

95 m

m

90 m

m

54 mm

3 TE

Fig. 27 Dimensions


Troubleshooting

12 Troubleshooting

Problem Possible cause Remedy

The IP address of the WAREMA climatro-nic® WebControl is no longer recognised by the browser.

A power failure occurred andDHCP is set to "ON". Therefore, a new IP address was automatically assigned on the router. The WAREMA climatronic® WebCon-trol can no longer be reached at the old address.

Enter the new IP address (from the client table of your router, see Chapter 4.2 on page 13).If you would like to prevent this from hap-pening in the future, set DHCP to "OFF" as described in Chapter 8 on page 27.

The WAREMA climatronic® WebControl is not found by the mobile device being used, and the status LED on the WAREMA clima-tronic® WebControl flashes red.

DHCP is set to "OFF", i.e. the IP address is not automatically assigned on the router.

Check the network connection.If you are using an SD card, check whether DHCP is set to "ON" or "OFF" in the saved IP information. Set DHCP to "ON" if neces-sary.

If you are operating the system using the Android app, the IP address is displayed on the "System" tab. You can then enter this number in the menu line of the browser (e.g.: http://192.....). TIP: Save this address in the browser as a

bookmark.

The status LED does not light up. The power supply of the WAREMA clima-tronic® WebControl has been interrupted.

Check the connection at the yellow/white socket (power supply) or briefly press the reset button.

The green LED on the RJ45 socket for the LAN cable is not lit.

There is a problem with the connection between the RJ45 socket and the router connection (e.g. line problem, the connector is not properly plugged in).

Check the power supply on the router and check the connection between the router and the RJ45 socket.

You are not able to add an additional room; a plus does not appear next to "Room".

Maximum capacity has been reached; you have already created 64 channels with 10 entries each (see 2.1 on page 6).

Delete unnecessary rooms to make space for new rooms.

The WAREMA climatronic® WebControl cannot be found by the app.

The Android device is not on your router's WLAN network.

Before opening the app, check whether your router is switched on and the WLAN is ac-tive. If not, log into the WLAN network.

While you are in your WAREMA climatronic® WebControl App, the following error mes-sage appears: "No connection to WebControl"

► The WLAN connection between the app and the WAREMA climatronic® WebControl is not stable.

► The range of the WLAN network was ex-tended with the use of multiple routers and the terminal device (WAREMA climatronic® WebControl) is switching between the routers.

Create a stable WLAN connection.

The WAREMA climatronic® WebControl can-not be operated externally over the Internet.

The WAREMA climatronic® WebControl is only intended for use on your own WLAN network.

Operate the WAREMA climatronic® Web-Control from home on your own WLAN network.

When Internet Explorer is used, the page is not displayed correctly (rooms and channels are shown on top of one another and not side-by-side, for example).

Internet Explorer is using the wrong view (compatibility view).

Press the F12 key on your keyboard while using Internet Explorer. Then set the browser mode to Internet Explorer 10.

You are unable to connect to your WAREMA climatronic® WebControl from your device (PC, smartphone).

Up to three browsers can access the WA-REMA climatronic® WebControl at one time (see Chapter 2 on page 6). Other peo-ple may be attempting to access the system on mobile devices.

Make sure that no more than three browsers (on tablets, smartphones etc.) attempt to ac-cess the WAREMA climatronic® WebControl at one time.

You are accustomed to seeing an ID label on WAREMA devices which you usually need to keep in a safe place, but you can-not find the label.

The WAREMA climatronic® WebControl does not have its own ID, since it is con-trolled over a separate bus (controlbus), which means that there is only a bus ID.

There is NO separate ID label included with the WAREMA climatronic® WebControl. No ID is necessary.

No connection to the climatronic control panel is possible; you receive the following error message: "Communication timeout between climatronic and WebControl".

The port on the WAREMA climatronic® con-trol panel is not set to "RS485" (it is set to USB instead).

Enable the "RS485" port on the WAREMA climatronic® control panel as described in the Chapter 4.1 on page 13.

WAREMA Renkhoff SEHans-Wilhelm-Renkhoff-Strasse 297828 Marktheidenfeld/Main; Germany http://www.warema.com [email protected]

Documents

WAREMA climatronic® WebControl - solskjermingsgruppen.no