AR72.10-P-1000AL Remove/install front door lining 2.8.04

MODEL 169.3

P72.10-3178-09

Shown with code (954) Avantgarde1 Door lining2 Covering3 Clip4 Electrical connector (with code (954)

Avantgarde or code (955) Elegance)

E17/3 Left front door entrance, exit and warning lamp (with code (954) Avantgarde or Code (955) Elegance)

E17/4 Right front door entrance, exit and warning lamp (with code (954) Avantgarde or code (955) Elegance)

5 Electrical connector6 Release cable7 Inside door opener8 Clip9 Bolts

P72.10-3166-07

1 Door lining 8 Clip

Modification notes

25.1.05 "Bolt securing agent" added Step 4

e d Remove/Install

1 Completely lower crank window

2 Remove mirror triangle cover from front door AR72.10-P-3001AK

3 Unclip panel (2)

Copyright DaimlerChrysler AG 18.06.2011 CD-Ausgabe G/09/05 . This WIS print-out will not be recorded by Modification services. Page 1

4 Remove screws (9) n *BA72.10-P-1008-01L

i Installation: Apply bolt securing agent to bolt thread (9)Loctite 262 *BR00.45-Z-1068-02A

5 Unlock catch hook (arrow A) on clip (8) with suitable screwdriver and pull clip (8) out of door lining (1)

i The catch hook (arrow A) is located at the height of the dot (arrow B).

i Installation: Replace damaged clip (8).Observe installation position: The dot (arrow B) on the clip (8) should point toward the center of the vehicle.

6 Unclip door lining (1) from clips (3) with mounting wedge

l *110589035900

i Installation: Replace damaged clips (3).

7 Remove door lining (1) upward from front door until electrical connectors (4, 5) are accessible

i Electrical connector (4) only on vehicles with code (954) Avantgarde or code (955) Elegance.

8.1 Disconnect electrical connector (4) from left front door entrance, exit and warning lamp (E17/3) and right front door entrance, exit and warning lamp (E17/4)

On vehicles withcode (954) Avantgarde orcode (955) Elegance

9 Disconnect electrical connector (5) from driver and front passenger power window, outside mirror adjustment and CL switch group

10 Unclip release cable (6) from inside door opener (7) and remove door lining (1)

11 Install in the reverse order

n Front door

Number Designation Model169.3

BA72.10-P-1008-01L Bolt, door lining to door module Nm 7

Mounting wedge

110 589 03 59 00

Auxiliary repair materials

Number Designation Order number

BR00.45-Z-1068-02A Loctite 262 Loctite Deutschland GmbH, Arabellastrasse 17

D-81925 Munich

Copyright DaimlerChrysler AG 18.06.2011 CD-Ausgabe G/09/05 . This WIS print-out will not be recorded by Modification services. Page 2