W 377

Operating instructionsfor Washing machineW 377 WPS

It is essential to read these operating instructions before Qinstalling or using the machine, toavoid the risk of accident, or damageto the machine. M.-Nr. 05 400 220

Caring for our environmentDisposal of the packingmaterialThe transport and protective packinghas been selected from materialswhich are environmentally friendly fordisposal and can normally be recycled.

Ensure that any plastic wrappings,bags etc. are disposed of safely andkept out of the reach of babies andyoung children. Danger of suffocation!

Rather than just throwing thesematerials away, please ensure they areoffered for recycling.

Disposal of your old applianceOld appliances contain materials whichcan be recycled. Please contact yourdealer, your local waste collectioncentre or scrap merchant about poten-tial recycling schemes.

Ensure that the appliance presents nodanger to children while being storedfor disposal. See the appropriate ad-vice in the Warning and safety instruc-tions.

Caring for our environment

2

ContentsCaring for our environmentDisposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Disposal of your old appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warning and safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installation and connectionFront view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Installation surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Installing the washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Removing the transit fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Re-fitting the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Screwing out and adjusting the feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Washer and Dryer stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Connection to the drainage system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Description of the applianceSpecial programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Delicates and Silks / programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Load size indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Dispensing recommendation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Water plus system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Delay start h/mins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Time remaining display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Locking functions (programme locking, system lock) . . . . . . . . . . . . . . . . . . . 10Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Multi-function display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Important control panelfeatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Programme selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Additional option buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Spin button with indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Contents

3

Before using for the first timeCalibrating to zero. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Washing environmentally and economically . . . . . . . . . . . . . . . . . . . . . . . . . . 15

How to wash correctlyBefore washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Selecting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Delay start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

At the end of a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Brief instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 25Interrupting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Skipping a programme stage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Selecting a different programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

DetergentWater softeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Washing with several components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Fabric conditioners and liquid starch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Automatic dispensing of fabric conditioners or liquid starch to laundryat the end of a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Adding fabric conditioner or liquid starch separately. . . . . . . . . . . . . . . . . . . . 30

Dye removers / dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Locking functionsElectronic programme locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Electronic system lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Programmable functionsWater plus system (P2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Gentle action (P9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Top-up rinse for COTTONS (P10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Memory Function (P11) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Buzzer (P20). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Contents

4

Cleaning and careExtra cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Cleaning the detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Cleaning the fluff (drain) filter and pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Cleaning the filter in the water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Problem solving guide The programme does not start.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 The wash programme stops and a fault indicator light comes on. . . . . . . . . . . . 45 A fault indicator light comes on but the wash programme continues as normal. 46 Problems with the load size indicator and the dispensing recommendation . . 47 General problems or an unsatisfactory wash result . . . . . . . . . . . . . . . . . . . . . . 48Opening the drum door in the event of a power failure . . . . . . . . . . . . . . . . . . . . . 51Customer contact. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Contents

5

Warning and safety instructionsRead the operating instructions be-fore using this machine for the firsttime. They contain important infor-mation about the safety, use andmaintenance of the machine. Thisway you will avoid the risk of acci-dents and damage to the machine.Keep these operating instructions ina safe place and ensure that newusers are familiar with the content.Pass them on to any future owner ofthe machine.

Correct usageOnly use the washing machine towash items which are specified by

the manufacturer to be machine-wash-able on the wash-care label, and tex-tiles composed of hand-washable woolor wool blend fabrics as well as satin,lace, silk and other hand-washable gar-ments.Any other applications may be dan-gerous. The manufacturer is not liablefor damage resulting from improperuse or operation.

This appliance should not be oper-ated by children. Supervise its use

by the elderly or infirm.

Technical safetyBefore setting up the machine,check it for any externally visible

damage. Do not install and use a dam-aged machine.

Before connecting the machine,ensure that the connection data on

the data plate (fusing, voltage and fre-quency) match the mains electricity

supply. If in any doubt, consult a quali-fied electrician.

The electrical safety of this ap-pliance can only be guaranteed

when continuity is complete betweenthe machine and an effective earthingsystem which complies with local andnational regulations. It is most import-ant that this basic safety requirement isregularly tested by a qualified electri-cian.The manufacturer cannot be held re-sponsible for the consequences of aninadequate earthing system (e.g. elec-tric shock).

Do not connect the appliance tothe mains electricity supply by an

extension lead. Extension leads do notguarantee the required safety of the appliance (e.g. danger of overheating).

The machine is built in accordancewith current safety requirements.

Unauthorised repairs could result in un-foreseen dangers for the user, forwhich the manufacturer cannot acceptresponsibility. Repairs should only beundertaken by a Miele approved engineer.Ensure current is not supplied to the ap-pliance while maintenance or repairwork is being carried out.

The machine is only completely iso-lated from the electricity supply

when:

it is switched off at the wall socketand the plug is withdrawn, or

it is switched off at the mains, or

the mains fuse is withdrawn.

Warning and safety instructions

6

The Miele Waterproof system pro-tects from water damage provided

the following conditions have been met:

the machine is correctly plumbed inand connected to the electricity sup-ply.

if a fault has been identified, the ma-chine must be examined by a com-petent person before further use,and repaired if necessary.

Faulty components must only bereplaced by genuine Miele original

spare parts. Only when these parts arefitted can the safety standards of themachine be guaranteed.

In countries where there are areaswhich may be subject to infesta-

tion by cockroaches or other vermin,pay particular attention to keeping theappliance and its surroundings in aclean condition at all times. Any dam-age which may be caused by cock-roaches or other vermin will not becovered by the appliance guarantee.

UseDo not install your washing ma-chine in rooms where tempera-

tures below freezing may occur. Frozenhoses may burst under pressure.The re-liability of the electronic control unitmay be impaired at temperaturesbelow freezing point.

Before using the machine for thefirst time, check that the transit fit-

ting at the rear of the machine hasbeen removed (see section on "Installa-tion"). During spinning, a transit fittingwhich is still in place may result in dam-age to both the machine and adjacentfurniture or appliances.

Turn off the stopcock if the ma-chine is to be left for any length of

time (e.g. holiday), especially if there isno floor drain (gully) in the immediate vi-cinity.

Flooding dangerIf hooking the drain hose into a

wash basin, check that the water candrain off quickly enough to prevent thesink from overflowing.Make sure the drain hose is secure, sothat the force of the water flowing out ofthe hose does not dislodge it. Other-wise this will result in flooding.

Take care to ensure that foreignobjects (e.g. nails, pins, coins,

paper clips) do not find their way intothe machine with the washing. Thesemay damage components of the ma-chine (e.g. suds container, drum),which in turn can result in damage tothe washing.


7

7If the correct amount of detergentis dispensed, the machine should

not need to be descaled. If, however,you do wish to descale the machineonly use proprietary non-corrosive de-scaling agents and strictly observe theinstructions on the packaging.

Textiles which have been pre-treated in solvent based cleaning

agents must be thoroughly rinsed inclean water before being washed in themachine.

Never use solvent based cleaningagents in this machine, as this may

result in damage to component partsand create toxic fumes. Such deter-gents also pose a fire and explosion ha-zard.

Only use dyes specified by themanufacturer as being suitable for

use in a washing machine. Always ob-serve the manufacturers instructionscarefully.

Dye removers may contain sulphurcompounds which cause damage

such as corrosion. Do not use dyeremovers in this machine.

For machines with a portholedoor, remember that the porthole

glass will be hot when washing at veryhigh temperatures. Do not let childrentouch it.

Always make sure the drum is sta-tionary before reaching in to

remove washing. Reaching into a mov-ing drum is extremely dangerous.

AccessoriesAccessory parts may only be fittedwhen expressly approved by

Miele. If other parts are used, guaran-tee, performance and product liabilityclaims may be invalidated.

Disposal of your old machineBefore discarding an old machineunplug it. Render the plug useless.

Cut off the cable directly behind the ap-pliance to prevent misuse.


8

Description of the applianceSpecial programmes Programme for hand-washable

fabrics (Silks /)

Hand-washable fabrics which creaseeasily but do not contain wool canbe washed in the Silks / pro-gramme.

Programme for hand-washablefabrics (WOOLLENS /)

Hand-washable or machine-washablewool or wool blend fabrics can bewashed in the WOOLLENS / pro-gramme.

Programme for small loads(Quick wash)

This is a Cottons programme for verylightly soiled fabrics.

Programme for mixed fabrics (Mixedwash)

Suitable for small loads of garmentsmade from man-made fibres and cot-ton garments which can be washedtogether. Sort according to colour.

Rinse programme (Separate rinse)

Articles are only rinsed and spun in themachine.

Delicates and Silks / programmes In these programmes the laundry iswashed and spun very gently to re-duce creasing and the amount of iron-ing required, thus providing "Easy care"for your laundry.

Load size indicatorThe washing machine is equipped witha sensor which registers how muchlaundry is in the drum. This is displayedas a % figure.

Dispensing recommendationThe washing machine then calculatesthe amount of detergent to dispensewhich is a % of the total amount recom-mended by the manufacturer for a fullload of laundry.

Water plus systemThe water level for washing and rinsingis increased. For COTTONS pro-grammes an additional rinse can alsobe selected.

Description of the appliance

9

Delay start h/minsDelay start allows you to delay the startof a programme from 30 minutes up toa maximum of 24 hours.

Time remaining displayAfter the start of a programme, the dur-ation of the programme selected will beshown in the display counting down inhours and minutes and finally inminutes.

Locking functions (programme lock-ing, system lock)

Electronic programme lockingElectronic programme locking preventsthe door from being opened or the pro-gramme cancelled during a wash pro-gramme. The electronic programmelocking is automatically cancelled atthe end of the programme.

Electronic system lockThe system lock prevents anyone fromusing the washing machine withoutyour knowledge. When the system lockis activated :

the door cannot be opened with thedoor button

a programme cannot be started.

Future updates (PC)The indicator or check light marked PCallows a service engineer to updateyour machine in future years.

When, for example, new programmesare developed or new fabrics are intro-duced, a service engineer will be ableto modify existing programme cyclesaccordingly.

Miele will provide information whensuch possibilities become available.


10

Control panel

bMulti-function displaysee the following page for more infor-mation

cSTART buttonstarts the wash programme

dDelay start buttonfor delaying the start of a pro-gramme

eAdditional option buttonsIndicator light on = option selectedIndicator light off = option not se-lected

f Spin buttonfor selecting the final spin speed,Rinse hold or Without spin

g Indicator lights for spin speed, Rinse hold or Withoutspin

h Programme selectorfor selecting the wash programmeand temperature for that pro-gramme. The programme selectorcan be turned clockwise or anti-clockwise.

iProgramme sequence indictorlightsshow which section of the wash pro-gramme has been reached.

j Check lights k I-ON/0-OFF button

for switching the machine on or off or interrupting a programme

l Door buttonopens the machine door


11

Multi-function display

DDisplay

EDisplay indicator lights

F This button has the following twofunctions: Changes the display from

Load % , Detergent % and Time left h/mins

Sets the load sensors to zero

To enable you to wash environmentallyand economically:

The washing machine calculates theamount of laundry loaded. This is dis-played as a % figure:25/50/75/100%.

the amount of detergent required isthen displayed as a % figure:40/50/60/75/100%.In other words dispense this % of thetotal amount of detergent recom-mended by the manufacturer for afull load of laundry.

the duration of the programme de-pending on the programme and theamount of the load (Time remainingh/mins).

Please note that Load % dependson the programme selected and ap-plies to dry laundry only.

Important:Loads of less than 25% will not regis-ter in the display. However, the dis-pensing recommendation will showthe minimum value of 40%.

Please note that in the following pro-grammes the display will only show thetime remaining :

Separate rinse

Drain /spin

Starch

The display will also show: delay start

the programmable functions(when in programming mode)


12

Important control panelfeatures

Programme selectorThe programme selector is used to setthe basic wash programme and thetemperature for that programme. Thelight ring will go out a few minutes afterthe end of the programme to save en-ergy.

Additional option buttonsAdditional options can be added to thebasic programme.

Pressing the relevant button selects orde-selects the particular option. The in-dicator light comes on to show that theadditional option has been selected.

If an additional option is chosen whichis incompatible with the basic pro-gramme then the indicator light will goout when the button is released.

Spin button with indicator lightsThe maximum spin speed which canbe selected depends on the basic pro-gramme chosen.

Maximumspinspeed

Basic programme

1600 COTTONS, Quick wash, Starch,Drain/spin

1200 WOOLLENS, Separate rinse

900 MINIMUM IRON, Mixed wash

600 DELICATES

400 Silks

Press the Spin button to select a dif-ferent spin speed. However, you can-not select a spin speed higher than themaximum allowed for the basic washprogramme chosen.

The indicator lights show the speed se-lected.

You can also select Without spin toomit interim spins and the final spin.

Press the Spin button to reach:

Rinse hold

The laundry is not spun and remainssuspended in the final rinse water.This reduces creasing if the laundryis not going to be removed from thedrum immediately after the end ofthe programme.

To continue the programme:

Select a spin speed.

To finish the programme:

Press the Door button.

Without spin

Laundry is not spun. Water is drainedaway after the final rinse and the ma-chine goes straight into the anti-crease stage.


13

Before using for the first timeBefore using the machine for thefirst time ensure that it is correctly in-stalled and connected. See the rele-vant section under Installation. Also check that the fluff filter is se-curely tightened. Otherwise there isa risk of water leakage during use.

For safety reasons spinning is notpossible until the machine has beenprepared for using for the first time.

To activate the spinning function youmust run a wash programme withoutany laundry and without detergent.(Using detergent could result in an ex-cessive build-up of foam).

This also activates the ball valve. Theball valve prevents detergent escapingfrom the suds container into the sumpduring a wash programme, thus mak-ing maximum use of the detergent.

1 Turn on the stopcock.

2 Press the I-ON/0-OFF button in.

3 Turn the programme selector to COTTONS 40C.

4 Press START.

5 At the end of the wash programme:Turn the programme selector to Fin-ish.

For the load size indicator to workeffectively, the sensor must also becalibrated to zero as you would withbathroom scales:

Calibrating to zero6 Press the Door button and open the

drum door.

7 Turn the empty drum round once byhand.

8 Turn the programme selector to oneof the temperatures for the COT-TONS programme.

The Load % indicator light will come on.

9 Press the button above the STARTbutton for least 5 seconds. The dis-play will jump to Detergent % and 40will appear in the display. The sen-sor has been calibrated to zerowhen the 40 in the display goes out.

The accuracy of the measuring de-vice will improve over the first fewprogrammes. For this reason, pleasere-calibrate the sensor to zero aftereach of the first few wash cycles.

If the sensor is not calibrated to zerothen the values displayed by thewashing machine will be incorrect.

Before using for the first time

14

Washing environmentally and economically Water consumption and energy

usage are determined by the size ofthe load. Load to the maximum rec-ommended for the programme se-lected.

To save energy wash normally andlightly soiled laundry at lower tem-peratures. The 95C Cottons pro-gramme is probably only needed inexceptional circumstances, e.g. foroil based stains or where a very hotwash is required.

Use the Mixed wash or the Quickwash programme for smalleramounts of laundry.

A main wash (programme withoutpre-wash) is sufficient for cleaningnormally soiled laundry.

By using the additional option Soakfor heavily soiled laundry you can se-lect a lower temperature in the mainwash.

Use the additional option Soak in-stead of Pre-wash with heavily soiledlaundry.If Soak is followed immediately by amain wash the same suds are used.

Use the Short wash option for nor-mally or very lightly soiled laundry.

Do not exceed the amounts of deter-gent which may be recommendedby the manufacturer on the packa-ging.

Reduce the amount of detergent withsmaller loads (as indicated in the dis-play).

Select the highest suitable spinspeed in the wash programme whentumble drying afterwards.

Load recognition and automatic rins-ing can cause the duration of a pro-gramme to vary greatly. The mainwash may be shortened and a rinsecycle omitted depending on theamount of laundry.

Washing environmentally and economically

15

How to wash correctlyBefore washing

1Sort the laundry

Empty all pockets.

Foreign objects (e.g. nails, coins,paper clips, etc.) can cause dam-age to garments and componentsin the machine.

Badly soiled areas, e.g. collars andcuffs, and water soluble stains canbe pre-treated with bar soap, liquiddetergent or detergent mixed into asolution or paste.

With particularly stubborn stains askyour dry cleaner for advice.

Do not used solvent-based cleaningagents in this machine.

Sort the laundry by colour and bycare label symbol. Most garmentshave a textile care label in the collaror side seam. See the followingpages for information on which pro-grammes to use for different fabrictypes.

Dark textiles often contain excess dyeand should be washed separately sev-eral times before being included in amixed load.

Delicate textiles should be washed sep-arately in a delicates programme (usea washing bag where appropriate).

Curtains:Remove lead weights and strips orplace in a laundry bag.

Underwiring and collar stiffeners:Any loose wiring in bras, shirt collarstiffeners, etc. should be removed orsewn in.

Knitted garments, trousers andjeans, T-shirts and sweat shirts:Turn inside out, if recommended bythe manufacturer.

Close any zips, fasten hooks and eyesetc before washing.

Do not wash any items in this machinewhich are specified by the manufac-turer as non-machine washable onthe care label. (h symbol)

How to wash correctly

16

Programme chart

COTTONS 9876 Fabric Cottons and linen fabrics, e.g. bed linen, table linen,

towelling, jeans. underwear, T-shirts, nappies.Additional options Soak, Pre-wash, Short, Water plusNotes Only use the COTTONS 95C programme for heavily

soiled and incontinent laundry. For heavily soild laundry select the Soak or Pre-wash

additional options. For lightly soiled laundry select the Short additional

option. For dark coloured fabrics use a detergent for coloured

fabrics.Detergent Powder detergent, detergent for coloured fabrics, liquid

detergent.max. load 5 kgNote for test institutes:Programme setting for testing according to EN 60456 standard: Cottons 60C

MINIMUM IRON 4321Fabric White nylon (60C), white polyester fabrics (50C),

coloured nylon, polyester, cotton and viscose fabrics withspecial finishes, acrylic, cotton fabrics coloured polyester/ cotton fabrics, (40/30C) minimun iron fabrics notwashable at higher temperatures.

Additional options Soak, Pre-wash, Short, Water plusNotes For lightly soiled laundry select the Short additional

option. For heavily soild laundry select the Soak or Pre-wash

additional options.Detergent Powder detergent, detergent for coloured fabrics, liquid

detergent, detergent for delicates.max. load 2.5 kg

See Detergent section for more information on detergents.


17

DELICATES a@Fabric Acrylics, acetate and triacetate, 100% cotton easy care

shirts and blouses.Curtains, specified machine-washable by themanufacturer.

Additional options Soak, Pre-wash, Short.Notes Laundry remains relatively crease-free for easier

ironing. Dust in curtains usually makes using a programme

with Pre-wash advisable. For curtains made from delicate fabrics reduce the

spin speed or select Without spin.Detergent Liquid detergent for delicates.max. load 1 kg

Silks /Fabric Hand-washable fabrics with no wool content, e.g. satin,

lace and silk.Additional option Soak, Pre-wash, Short, Water plusNotes Laundry remains relatively crease-free for easier

ironing. Place socks, tights, bras etc.- in a washing bag.

Detergent Use liquid detergent for machine washable woollens anddelicates. Do not use biological detergent on silk as theenzymes may damage the silk.

max. load 1 kg do not overload

WOOLLENS /Fabric Machine-washable or hand-washable wool or wool blend

fabrics. Please note hand-washable garments will notshrink, strech, matt or felt beyond the accepted toleranceof the item.

Detergent Liquid detergent for machine washable woollensmax. load 2 kg do not overload

See Detergent section for more information on detergents.


18

Quick wash 7Fabric Very lightly soiled fabrics, which can be washed in the

Cottons programme.Additional option Water plus.Detergent Powder detergent, detergent for coloured fabrics, liquid

detergent.max. load 2.5 kg

Mixed wash 72Fabric Small loads of garments made from man-made fibres

and cotton garments which can be washed together. Sortaccording to colour.

Additional options Soak, Pre-wash, Short, Water plus.Detergent Powder detergent, detergent for coloured fabrics, liquid

detergent. max. load 3 kg

StarchFabric Table cloths, napkins, overalls, uniforms.Notes The laundry should be washed but not treated with

fabric conditioner. Use liquid starch.max. load 5 kg

Separate rinse Fabric Articles which have been washed by hand and only need

to be rinsed and spun in the machine.max. load 5 kg

Drain/Final spin Notes To drain only: select Without spin.max. load 5 kg

See "Detergent" section for more information on detergents.


19

Selecting a programmeTo add detergent with the help ofthe dispensing recommendation fea-ture, follow steps 2, 3 and 4below before loading the drum.

2 Switch on the washing machine Press in the I-ON/0-OFF button.

3 Open the drum door Press the Door button and open thedrum door.

The washing machine is switched on. Ifthe programme selector is at Finish, thelight ring around the programme selec-tor will flash to remind you to select theprogramme required.

4Select a programmeTurn the programme selector to therequired programme.

The Detergent % indicator light comeson. As the drum is empty, the displaywill not yet show any number.

If a number is showing in the dis-play and the drum is empty, rotatethe drum once. If the display stilldoes not go out, press the buttonabove the START button until thenumber goes out.

5 Load the drum Unfold the laundry and load looselyin the drum. To achieve best resultsit is advisable to make up mixedloads consisting of both large andsmall items. This improves the wash-ing effect and helps distribute theload evenly to keep the machinestable and reduce the noise levelduring spinning.

The display shows the amount oflaundry loaded as a % (in 25% steps).

Loads of less than 25% will not registerin the display.

If the amount of laundry exceeds themaximum load, the display will flash.Overloading causes creases and re-duces cleaning efficiency.

6Close the drum door with a gentleswing.Make sure that no garments are caughtbetween the drum door and seal.

The Detergent % indicator light comeson and the amount of detergent re-quired for the programme selected isshown in the display.


20

7Add detergent.

The percentage amounts in the displayhelp you to add the correct percentageamount of detergent recommended bythe detergent manufacturer.

If the display shows:

40 Add 40 percent . . .(slightly less than half)

50 Add 50 percent . . .(half)

60 Add 60 percent . . .(slightly more than half)

75 Add 75 percent . . .(three quarters)

100 Add 100 percent . . .. . . of the amount recommended bythe manufacturer.

Take the level of soiling and also thewater hardness into account. It is im-portant to dispense the correct amount because . . .

. . . too little detergent results in: Laundy not getting properly clean

and with time it may become greyand hard to the touch.

Greasy particles cling to the laundry.

Limescale build up on heater ele-ments.

. . . too much detergent results in: Excessive foam, which causes a low

level of agitation and poor wash,rinse and spin results.

High water consumption (an addi-tional rinse cycle will automaticallyswitch in).

A burden to the environment.

Pull out the detergent drawer andplace detergent in the compartmentsas follows:

i = Detergent for pre-wash (if selecting a pre-wash add 1/4 of thetotal amount recommended).

j = Detergent for the main washincluding Soak.

= Fabric conditioner or liquid starch.

See "Detergent" section for further infor-mation.

8Open the stopcock.

If you do not want to select any of theadditional options (steps 9 to !)proceed to step .


21

Additional options9 Select any additional option re-quired.

Press the appropriate additional op-tion button.

Soak

For heavily soiled and stained itemswith dried-on stains, or ones whichcannot be bleached out, (e.g. blood,fats and oils, cocoa).

A length of time of between 30 minutesand 6 hours can be chosen, in 30minute periods for the Soak process.

When the Soak button is pressedfor the first time, the indicator in thedisplay jumps from Detergent % toTime left h/mins; and the first 30minutes of the soak time are addedto the programme time.

Each further press of the button in-creases the soak time in 30 minuteperiods up to a maximum of 6 hours.The display shows the time remain-ing, which is the soak time and theprogramme time added together.

Deleting the soak time

Press the Soak button repeatedlyuntil the indicator light goes out.

Pre-wash

For heavily soiled and stained items.

Short

For lightly soiled items.

This shortens the programme runningtime. In the COTTONS, MINIMUMIRON, Silks and Mixed wash pro-grammes only two rinses are carriedout. With the exception of the Silks pro-gramme, the rinses are carried out witha higher water level.

Water plusIf you want to increase the water levelfor a wash process you can chooseone of the four options for the Waterplus button. The options are explainedin the section on Programmable func-tions - Water plus system.

The machine is set at the factory sothat the water level in the main washand rinses will be increased if theWater plus button is pressed.


22

0Select a spin speed

Press the Spin button repeatedlyuntil the indicator light for the spinspeed you want comes on.

In some programmes the maximumspin speed is limited. The machine willnot allow a higher spin speed to be se-lected.

Delay start!Select delay start if required.

Press the Delay start button. Eachpress on the button increases thedelayed time:

by 30 minutes up to 10 hours,

by 1 hour from 10 hours upwards.

To delete delay start

Press the Delay start button oncewhen 24 ^ is showing in the display.

Press the START buttonThis starts the programme. The pro-gramme duration will appear in the dis-play and the Time left h/mins indicatorlight will come on.


23

At the end of a programme~Open the drum door

Press the Door button.

$Remove the laundry

Check the folds in the door seal forany small articles, e.g. buttons whichbe lodged there.

Check that all items have beenremoved. Items left in the drumcould discolour other items in thenext wash or become discolouredthemselves.

%Switch off the washing machine.Press the I-ON/0-OFF button andturn the programme selector to Fin-ish.

&Close the drum doorOtherwise there is the danger of ob-jects being placed inadvertently in thedrum. If these remained unnoticed andwere washed in the next load, theycould damage the laundry.

Brief instructionsPlease note:To help familiarise yourself with how touse your washing machine please readthe sections "Before washing", "Select-ing a programme" and "At the end of aprogramme" in detail.

1Sort the laundry

Selecting a programme:

2Switch on the washing machine

3Open the drum door

4Select a programme

5 Load the drum

6Close the drum door

7Add detergent

8Open the stopcock

Steps 9 to ! are optional.

9Select any additional option required

0Select a spin speed

!Select delay start if required

Press the START button

At the end of a programme:

~Open the drum door

$Remove the laundry

%Switch off the washing machine

&Close the drum door


24

Adding or removing laundryafter a programme has startedLaundry can be added or removedafter the programme has started whenusing the following programmes:

COTTONS

MINIMUM IRON

Quick wash

Mixed wash

Starch

Press the Door button in and hold ituntil the door springs open.

Add or remove items.

Close the door.

The programme will continue automati-cally.

Please note:Once a programme has started the ma-chine cannot recognise any adjustmentto the load. For this reason if laundry isadded or removed after the start of aprogramme, the machine will alwayscomplete the programme cycle for afull load which can lead to an increasein the time remaining for the pro-gramme shown in the display.

The door cannot be opened, when: the suds temperature is above 55C. the water is above a certain level.

programme locking is switched on.

the programme has reached theFinal spin stage.

The locked indicator light will come onif the Door button is pressed when theabove conditions are present.


25

Interrupting a programmeSwitch the washing machine off withthe I-ON / 0-OFF button.

To continue with the same programme:

Switch the washing machine backon again with the I-ON / 0-OFF but-ton. Altering a programme once se-lected

The machine will accept the followingchanges after a programme hasstarted:

at any time after the start, the spinspeed can be changed within thelimits for the programme.

up to 6 minutes after the start , theadditional functions Water plusand/or Short can be selected or de-selected and a different temperaturecan be selected for the programmein use.

After the start of a programme it is nolonger possible to select a different pro-gramme.

If the programme selector is moved,the indicator light Anti-crease/Finish willstart flashing. However, the programmesequence remains unaffected. The indi-cator light will go out again when theprogramme selector is moved back tothe programme previously chosen.

Skipping a programme stageTurn the programme selector to Fin-ish.

As soon as the programme sequenceindicator light for the programme stageyou want the programme to continue atstarts flashing:

Turn the programme selector backagain to the appropriate programmewithin 4 seconds.

Programmes cannot be altered andprogramme stages cannot beskipped if programme locking hasbeen activated.

Selecting a different pro-gramme

Switch the washing machine off withthe I-ON / 0-OFF button.

Turn the programme selector to Finish.

Switch the washing machine backon with the I-ON / 0-OFF button.

Select a different programme.

Press the START button.


26

Programme sequenceThis washing machine has fully elec-tronic controls with automatic load rec-ognition. The machine determines theamount of water to use depending onthe load and the absorbtion rate of thelaundry as water is taken in. The pro-gramme sequence and duration willtherefore vary with the load.

The programme sequences outlinedbelow are based on the basic pro-gramme with a full load.

Additional options which can beselected have not been taken intoaccount.

The programme sequence indicatorlights show the stage the programmehas reached.

COTTONSMain washWater level: lowWash rhythm: normalRinsesWater level: lowNo of rinses: 3 or 41)

SpinningRinse and interim spin2): yesFinal spin: yes

MINIMUM IRONMain washWater level: lowWash rhythm: normalRinsesWater level: mediumNo of rinses: 3Graduated rinsing3): above 40CSpinningRinse and interim spin2): yesFinal spin: yes

DELICATESMain wash Water level: highWash rhythm: normalRinsesWater level: highNo of rinses: 3SpinningRinse and interim spin2): noFinal spin: yes

Silks /Main washWater level: mediumWash rhythm: SilksRinsesWater level: mediumNo of rinses: 2SpinningRinse and interim spin2): noFinal spin: yes


27

WOOLLENS /Main washWater level: mediumWash rhythm: WoollensRinsesWater level: mediumNo of rinses: 2SpinningRinse and interim spin2): yesFinal spin: yes

Quick washMain washWater level: lowWash rhythm: normalRinsesWater level: mediumNo of rinses: 2SpinningRinse and interim spin2): yesFinal spin: yes

Mixed wash Main washWater level: lowWash rhythm: normalRinsesWater level: mediumNo of rinses: 3Graduated rinsing3): for very delicate

itemsSpinningRinse and interim spin2): yesFinal spin: yes

StarchWater level: lowWash rhythm: normalFinal spin: yes

Separate rinseWater level: highNo of rinses: 2Final spin: yes

Special features in the programmesequences:Anti-crease:At the end of every programme, withthe exception of the WOOLLENS pro-gramme, the anti-crease action swit-ches on for a maximum of 30 minutes.1) A fourth rinse takes place automati-

cally when:

there is too much foam in the drum

if a spin speed of lower than 700rpm has been selected.

if Without spin has been selected2) Rinse and interim spin:

There is a spin between the rinses.

Omitting rinse and interim spin:Select Without spin on the spin speeddisplay3) Graduated rinsing:

The suds are cooled at the end of themain wash cycle by water flowing inand being pumped away at intervals.This also helps minimise creasing.


28

DetergentAll modern detergents produced forautomatic washing machines are suit-able, including liquid, compact (con-centrated), tablets and special applica-tion detergents. Use dispensing aids,e.g. balls, if these are supplied with thedetergent. Tablets are suitable for fullloads but note that it may be impracti-cal to reduce tablets by proportion tosuit smaller loads!

Woollens and knitwear containing woolmixtures and hand-washable garmentsshould be washed using a detergentspecifically designed for washing wool-lens.

Silk should be washed using a liquiddetergent specifically designed forwashing woollens. Do not use biologi-cal detergents on silk as the enzymesmay damage the silk!

Instructions for use and recommendedamounts for a full load are given on thedetergent packaging.

The right amount to dispense will de-pend on the following: The quantity of laundry (follow the ma-

chines dispensing recommendationand reduce the amount of detergentwith smaller loads as indicated on thedisplay)

The soiling level of the laundry.

Lightly soiledNo visible dirt or stains. Possiblyslight body odour.

Normally soiledVisibly dirty and/or just a few slightstains.

Heavily soiledStains and soiling clearly visible.

Water softenersA water softener such as Calgon canbe used to cut down on the use ofdetergents in extremely hard waterareas. Dispense according to theamount specified on the packaging.First add detergent and then the watersoftener.

Use a quantity of detergent as for softwater.

Washing with several compo-nents If you wash using several components(e.g. special application detergents),we recommend always dispensing theagents into compartment j in the fol-lowing order:

1. Detergent

2. Water softener

3. Stain remover, e.g. Biotex

This way the agents are distributedmore efficiently.

Detergent

29

Fabric conditioners and liquidstarchFabric conditioners make garmentssoft and fluffy to handle and help pre-vent static cling when tumble drying.

Starch stiffens and gives body to itemsof laundry, e.g. shirts, tablecloths andbed linen.

Dispense according to the amountspecified on the packaging.

Automatic dispensing of fabric condi-tioners or liquid starch to laundry atthe end of a programme

Add the fabric conditioner or liquidstarch to compartment . Do not ex-ceed the maximum level mark.

The conditioner or liquid starch is auto-matically dispensed in the last rinse. Atthe end of the programme a smallamount of water remains in the fabricconditioner compartment .

If starching frequently, clean the dis-penser compartment and especiallythe siphon tube and conditionerchannel. See "Cleaning the deter-gent dispenser drawer".

Adding fabric conditioner or liquidstarch separately

Add fabric conditioner or starch tocompartment i.

Turn the programme selector toStarch.

Select a spin speed.

Press the START button.

Dye removers / dyesDo not use dye removers in thewashing machine.

Only use dyes specified by themanufacturer as being suitable foruse in a washing machine. Alwaysobserve the manufacturers instruc-tions carefully.

Detergent

30

Locking functionsElectronic programme locking

Programme locking prevents the ma-chine from being opened or the pro-gramme cancelled during a washprogramme.

To activate programme lockingAfter the start of a programme, pressthe START button for at least 4 sec-onds until the locked check light(lower right on the control panel)comes on.

Programme locking is now activated.

The machine will now not accept anychanges and the programme will pro-ceed through to the end.

Programme locking is deactivated auto-matically at the end of the programme.

Deactivating programme lockingearly

Press the START button for at least 4seconds until the locked check light(lower right on the control panel)goes out.

Exception:

If the programme selector has beenmoved and the Anti-crease/Finish indi-cator light is flashing in the sequencedisplay.

First, turn the programme selectorback to the programme chosen pre-viously. The Anti-crease/Finish indi-cator light will go out.

Now press the START button for atleast 4 seconds until the lockedcheck light (lower right on the controlpanel) goes out

Locking functions

31

Electronic system lockThe system lock prevents your ma-chine being used without your knowl-edge.

When the system lock has been acti-vated:

the drum door cannot be openedwith the Door button and

a programme cannot be started.

To activate the system lockFirst, ensure that:

The drum door is closed

The programme selector is at Finish.

1Switch on the washing machine withthe I-ON / 0-OFF button.

2Press the Pre-wash button and keepit pressed in while carrying out steps3 to 5

3Slowly turn the programme selectorclockwise stage by stage toCOTTONS 60C.

4Now slowly turn the programme se-lector anti-clockwise stage by stageto Finish.

5Next slowly turn the programme se-lector anti-clockwise stage by stageto DELICATES cold.The locked check light (lower righton the control panel) will flash.

6Now release the Pre-wash button.

7 Turn the programme selector to Fin-ish.

8Switch the washing machine off withthe I-ON / 0-OFF button.

To de-activate the system lockRepeat steps 1 to 6. The lockedcheck light goes out.

Locking functions

32

Programmable functionsThe programmable functions can beused to tailor washing programmes tosuit your individual requirements.

Water plus system (P2)Selecting the Water plus additionaloption increases the water intake inthe programmes listed below.

The water intake is increased in thewash and rinse stages and in the COTTONS programme an extra rinsecycle is introduced.

There are four different settings whichcan be programmed to alter the waterintake for the following programmes:

COTTONS

MINIMUM IRON

Quick wash

Mixed wash

Silks

The programmed setting is then acti-vated by pressing the Water plus addi-tional option button.

The settings are as follows:Setting 1:an increase in the rinse water level forthe programmes listed.

Setting 2:an increase in the water level in themain wash and rinses for the pro-grammes listed (the washing machineis delivered with setting 2 programmedas standard).

Setting 3:an extra rinse cycle in the COTTONSprogramme only.

Setting 4:an increase in the water level in themain wash and rinses for the pro-grammes listed and also an extra rinsecycle in the COTTONS programme.

Steps 1 to 7 on the following page de-scribe how to programme and store asetting in memory.

Programmable functions

33

Follow steps 1 to 7 to programmeand store a setting in memory.The programmable functions are acti-vated to call up further features notshown on the control panel by usingthe additional option buttons in combi-nation with the programme selector.

Before you begin, first ensure that:

The washing machine is switched off.

The drum door is closed.


1Press the additional option buttonsShort and Water plus at the sametime, hold pressed in and . .

2 . . . switch on the machine with the I-ON / 0-OFF button.

3 Let go of all these buttons. P 0 appears in the display.

4 Turn the programme selector to DELICATES 30C:

5 The P will now flash in the display alternating with the number 2

In addition, one of the following numbers will appear on the right of thedisplay:

1, 2, 3 or 4

6Press the START button to toggle between the various settings.

The number on the right of the displayshows which setting is selected.

1 = Setting 1 is selected (increase water level in the rinses)

2 = Setting 2 is selected(increased water level in the main wash and in the rinses)

3 = Setting 3 is selected(extra rinse in the COTTONS programme)

4 = Setting 4 is selectedincrease in the water level in the main wash and rinses and also an extra rinse in the COTTONS programme.


The Water plus button has now been al-located the setting you have chosen.This setting will remain in memory untilanother setting is programmed.


34

Gentle action (P9)Activating gentle action reduces thedrum action. Slightly soiled items arewashed more gently.

Gentle action can be used with theCOTTONS, MINIMUM IRON, Quickwash, Starch and Mixed wash pro-grammes.

If Gentle action is programmed intothe machine, every wash cycle in theseprogrammes will be carried out withgentle action rhythm.

The washing machine is delivered withGentle action de-activated.

Follow steps 1 to 7 to programmeand store in memory.The programmable functions are acti-vated to call up further features notshown on the control panel by usingthe additional option buttons in combi-nation with the programme selector.








4 Turn the programme selector toMixed wash:


In addition, one of the following will appear on the right of the display:

0 = Gentle action is deactivated

1 = Gentle action is activated

6Press the START button to changefrom one to the other. The displaywill change accordingly from 0 to 1or from 1 to 0.


The setting you have selected is nowstored in memory and will remain sountil you alter it.


35

Top-up rinse for COTTONS(P10)

When this is activated, additionalwater flows into the drum at the endof the main wash and the suds arecooled down. Hot suds can damageplastic drainage pipes.

Top-up rinse takes place when tem-peratures of 95C and 75C are se-lected.

The washing machine is delivered withthe Top-up rinse for COTTONS de-activated.






.




4 Turn the programme selector toStarch:


In addition, one of the following will ap-pear on the right of the display:

0 = Top-up rinse is deactivated

1 = Top-up rinse is activated

6Press the START button to changefrom one to the other. The displaywill change accordingly from 0 to 1or from 1 to 0 .




36

Memory Function (P11)If an additional option(s) is selectedfor a programme, and / or the spinspeed is altered, the machine storesthese changes in memory at the startof a programme.

When that particular programme ischosen again, the display will show theadditional option(s) and / or spin speedwhich have been stored for that pro-gramme in the memory.

The washing machine is delivered withthe memory function de-activated.






.




4 Turn the programme selector to Sep-arate rinse:



0 = Memory function is deactivated

1 = Memory function is activated





37

Buzzer (P20)When the buzzer function has beenactivated, an audible tone sounds re-peatedly at the end of a programmeor when Rinse hold is reached.

The buzzer will sound for up to an hourafter the programme has finished.

The washing machine is delivered withthe buzzer deactivated.






.




4 Turn the programme selector to COT-TONS 75C:



0 = Buzzer is deactivated

1 = Buzzer is activated





38

Cleaning and careDisconnect the appliance from themains electricity supply and with-draw the plug from the socket priorto cleaning the machine.

Clean the casing with a mild non-ab-rasive detergent or soap and water.Wipe dry with a soft cloth.

Clean the fascia panel with a dampcloth and wipe dry with a soft cloth.

The drum can be cleaned using asuitable proprietary stainless-steelcleaning agent.

Do not use abrasive cleaners, glasscleaners or all-purpose cleaningagents. These might damage plas-tic surfaces and other componentsbecause of the chemicals they con-tain.The washing machine must not behosed down.

Extra cleaningCarry out a hot wash (70C or above)with powder detergent approx. every 6weeks to help prevent deposits build-ing up in the machine. These canoccur when washing is mainly done atlow temperatures, and also lead to un-pleasant smells. If you have no reasonto wash occasionally at this high tem-perature, then run a Cottons 95C pro-gramme with detergent but no laundryat regular intervals.

Cleaning and care

39

Cleaning the detergent dispenserdrawerRemove detergent residues regularly.

Pull out the detergent dispenserdrawer until a resistance is felt.Press down the release catch and atthe same time pull the drawer rightout of the machine.

Clean the detergent drawer withwarm water.

Clean the siphon.

1. Remove the siphon from compart-ment . Wash under running warmwater. Clean the siphon tube in thesame way.

2. Replace the siphon.

Cleaning and care

40

Cleaning and careCleaning the fluff (drain) filterand pumpCheck the drain filter initially after 3-4washes to ascertain how often it islikely to require cleaning.

With normal cleaning approx. 2 litres ofwater run out.

If the drain outlet is clogged, morewater will be retained in the machine(up to 25 litres).

Caution: If laundry has beenwashed at a high temperature,water draining out of the machinewill still be hot.

There is a filter flap opener located be-hind the detergent drawer facia panel(see illustration).

Remove the opener.

Use it to open the access flap.

Place a dish under the access flap.

Turn the fluff filter lid round 2-3 times.Do not take it right out.

With large volumes of water the dishwill need to be emptied several times.Secure the fluff filter back into positionand empty the dish before repeatingthe procedure.

Cleaning and care

41

Once the flow of water ceases:

Remove the fluff filter completely.

Clean the fluff filter thoroughly.

Remove any foreign objects (e.g.buttons, coins, etc) and fluff. Turnthe impeller by hand to check that itis free to rotate. Any foreign objectcausing an obstruction should be re-removed.

Clean the inside of the fluff filter hous-ing. Remove any deposits of lime-scale and detergent or foreign ob-jects from the thread of the filterhousing and filter unit (as these ob-jects can cause a leakage of water).Deposits of limescale are often asign of underdosage of powder.

Put the fluff filter back in place andsecure.

Make sure the fluff filter is securelytightened. Otherwise there is a riskof water leakage during use.

After cleaningPour approx. 2 litres of water into thedetergent dispenser compartmentj to reactivate the ball valve.

Cleaning and care

42

Cleaning the filter in the waterinletThe washing machine has a filter to pro-tect the water inlet valve.

The accessible filter in the union in theopen end of the inlet hose should bechecked every six months, or moreoften if there are frequent interruptionsto the external water supply.

First turn off the stopcock.

Unscrew the threaded union con-necting the free end of the inlet hoseto the stopcock.

Remove the rubber seal 1 from therecess.

Using pointed pliers, take hold of theplastic filter bar 2 and remove.

Clean the plastic filter.

Put the filter and seal back in thereverse order and reconnect thehose.

Turn on the stopcock and check theconnection is watertight. If water dripsout, tighten the connection.

Never forget to put the filter back inplace after cleaning.

Cleaning and care

43

Problem solving guideWith the help of the following notes minor faults in the performance of the ap-pliance, some of which may result from incorrect operation, can be put right with-out contacting the Service Department.

Repair work to electrical appliances should only be carried out by a suitablyqualified person in accordance with local and national safety regulations. Un-authorised repairs could be dangerous.

The chart is divided into the following sections to help you: The programme does not start.

The wash programme stops and a fault indicator light comes on.

A fault indicator light comes on but the wash programme continues as normal.

Problems with the load size indicator and the dispensing recommendation.

General problems or an unsatisfactory wash result.

The programme does not start.Fault indicator Possible cause Remedy

The Anti-crease / Finish indicator light is not on, orthe START indicator lightis not flashing.

There is no power. Check that

the mains plug isplugged in.

the fuse or circuit breakerhas not tripped.

The check light locked isflashing.

The system lockhas been activated.

Deactivate the system lock.

The programme does notstart when Drain / Finalspin has been selected.

The washingmachine has notbeen prepared forusing for the firsttime.

Prepare the machine asdescribed in Before usingfor the first time.

Problem solving guide

44

The wash programme stops and a fault indicator light comes on.

Fault indicator Possible cause Remedy 1The buzzer sounds andthe Check drain lightflashes. appears in the display.

The water outlet isblocked.

Clean the fluff (drain)filter and drain pump.

The drain hose has beenfixed too high.

The maximum drainheight is 1 m.

The buzzer sounds andthe Check inlet lightflashes. appears in the display.

The water inlet is blocked. Open the stopcock.

The buzzer sounds andthe Check inlet andCheck drain lightsflash. appearsin the display.

The Waterproof systemhas reacted.

Call the CustomerService Department.

The buzzer sounds andthe Soak/Pre-wash orRinses indicator lightflashes in theprogramme sequencedisplay. appears in the display.

There is a fault. Start the programmeagain.If the fault indicatorsoccur again, contact theCustomer ServiceDepartment.

1 To switch off the fault indicator: switch the washing machine off with theI-ON / 0-OFF button and turn the programme selector to Finish.


45

A fault indicator light comes on but the wash programme continues as normal.

Fault indicator Possible cause Remedy 1The Check drain lightflashes.

The drain outlet isrestricted.

Clean the fluff (drain) filterand drain pump.

The Check inlet lightflashes.

The water inlet isrestricted.

Check whether the stopcock is opened

wide enough. the inlet hose is kinked.

The filter in the inlethose is dirty.

Clean the filter.

The Excess detergentcheck light comes on.

Excessive foam hasbuilt up duringwashing.

Use less detergent nexttime and follow therecommendation on thepackaging.

The Main wash indicatorlight flashes in theprogramme sequencedisplay.

There is a fault. Start the programme again.If the fault indicator occursagain, contact theCustomer Service Dept.

The Final spin indicatorlight flashes in theprogramme sequencedisplay

The final spin has not taken place. The machinedetected an imbalance.

The Anti-crease / Finishindicator light flashes inthe programmesequence display.

The position of the programme selector was alteredafter the start of the programme. Turn theprogramme selector back to the programmepreviously chosen.

1 To switch off the fault indicator: Switch off the machine with theI-ON / 0-OFF button and turn the programme selector to Finish.


46

Problems with the load size indicator and the dispensing recommendation

Problems Possible cause RemedyThere is no loadsize in the display

The washing machine isnot switched on / or aprogramme has not beenselected.

Switch the washing machineon. Select a programme andload the drum.

The amount of laundry inthe drum is less than 25%of the maximum load forthe programme selected.

The display will come onwhen 25% has been loaded.

When the washingmachine was switched onthere was already laundryin the drum. This hasdecalibrated the sensorfrom the zero position.

Remove the laundry from thedrum and press the buttonabove the START button forleast 5 seconds. The displaywill jump to Detergent % and40 will appear in the display.The sensor has beencalibrated to zero when the 40in the display goes out.

A load size isindicated in thedisplay but thereis no laundrypresent in thedrum.

The load size sensor hasbeen decalibrated fromthe zero position.

Rotate the drum once. If thedisplay does not go out,recalibrate the sensor to zero(see above section).

No load size isindicated in thedisplay for theDELICATES, Silksand theWOOLLENSprogrammes.

The maximum load is 1 kgfor the DELICATES andSilks programmes and2kg for the WOOLLENSprogrammes. In somecases the load size sensorfails to register these smallquantities. (The dispens-ing recommendation willstill show the minimumvalue of 40%).

Rotate the drum once.


47

General problems or an unsatisfactory wash resultProblem Possible cause Remedy

The machineshakes during thespin cycle.

The four feet are notresting evenly on thefloor.

Level the machine. Seeadvice on installation.

The laundry has notbeen spunsatisfactorily.

The spin speed selectedwas too low.

Select a higher spin speednext time.

The drum doorcannot be openedby pressing theDoor button.

The machine is notconnected to theelectricity supply.

Put the plug in the socket andswitch on.

The washing machine isnot switched on.

Switch the machine on withthe I-ON / 0-OFF button.

Power cut. Open the drum door asdescribed in the sectionOpening the door in theevent of a power failure.

The door was notcorrectly engaged.

Press hard against the lockside of the drum door andthen press the Door button.

There is still water in thedrum and the machine isunable to drain.

Clean the fluff (drain) filter andthe drain pump.

For safety reasons the drum door cannot be openedwhen the suds temperature is higher than 55C.

The pump makesstrange noises.

These do not indicate afault.

They occur at the end of apump sequence as a normalpart of the operation.


48

Problem Possible cause RemedyThe programmeselector light ring isnot lit up.

The machine has switched off the light ring to saveenergy. To switch the light ring back on again: press oneof the additional option buttons or turn the programmeselector.

Large residues ofdetergent remain inthe dispenserdrawer.

The water supplypressure is too low.

Clean the filter in the waterinlet system.

It may be useful to pressthe Water plus button.

Washing powder usedwith water softener tendsto become sticky.

Pour washing powder into thedispenser before adding anywater softener.

Fabric conditioneris not completelydispensed or toomuch waterremains in the compartment.

The siphon is eitherincorrectly positioned orclogged.

Clean the siphon, seeCleaning and care Cleaning the detergentdrawer.

Liquid detergentdoes not give therequired result.

Liquid detergents do notcontain bleachingagents. They do notremove fruit, coffee andtea stains

Use a general purposewashing machine powdercontaining a bleachingagent.

Pour stain removers intocompartment j of thedispenser drawer andliquid detergent into adispenser ball.

Never put stain removersand liquid detergenttogether in the dispenserdrawer.


49

Problem Possible cause RemedyGrey, greasyparticles cling towashed laundry.

Insufficient amounts ofdetergent were used tobreak down the particlesof grease in heavilysoiled laundry.

Add more detergent. Before washing the next

load run a COTTONS 95Cprogramme with powderdetergent but without aload. (See also Extracleaning in Cleaning andCare).

There are whiteresidues whichlook like powderdetergent on darkcoloured laundry.

The detergent containedcompounds (zeolites) toaid water softening whichare not soluble in water.These have ended up onthe laundry.

Try and brush off theresidues with a soft brushonce the laundry is dry.

Use a liquid detergent towash dark coloured textiles.Liquid detergents usuallycontain no zeolites.


50

Opening the drum door in theevent of a power failure

Switch the washing machine off.

There is a filter flap opener behind thedetergent drawer facia panel.

Remove the opener.

Use it to open the access flap anddrain the water as described in theCleaning the fluff filter and pumpsection of Cleaning and care.

Always make sure that the drum isstationary before reaching into themachine to remove laundry. Reach-ing into a moving drum is extremelydangerous.

Pull the emergency release down-wards (see illustration). The drumdoor will open.


51

Customer contactIn the event of any faults which you can-not remedy yourself please contact

Your Miele dealer or

Your nearest Miele Service Depart-ment (see back cover for the ad-dress).

When contacting the Service Depart-ment, please quote the model and ser-ial number of your appliance, both ofwhich are shown on the data platevisible at the top inside of the doorabove the porthole glass when thedoor is open.

Please note that telepone calls maybe monitored and recorded to im-prove our service.


52

Installation and connectionFront view

1 Inlet hose with Waterproof system

2 Electricity supply cable

3a - 3c Flexible drain hose (withdetachable swivel elbow)

4 Facia panel with controls

5 Detergent dispenser drawer

6 Drum door 7 Flap for fluff filter, drain pump and

emergency release

8 Handle recesses for moving the ma-chine

9 Four height adjustable feet

Installation and connection

53

Rear view

1 Protruding lid edge for holding whenmoving the machine

2 Electricity supply cable

3 Inlet hose with Waterproof system4 Drainage hose

5 Cover with transit bars

6 Restraining clip for: Inlet hose Drain hose Electricity supply cable Transit bars when removed


54

Installation surfaceA concrete floor is the most suitable in-stallation surface for a washing ma-chine, being far less prone to vibrationduring the spin cycle than woodenfloorboards or a carpeted surface.

Please note the following points:

The machine must be level and se-curely positioned.

To avoid vibrations during spinning,the machine should not be installedon soft floor coverings.

If installing on a wooden joist floor:

we recommend a plywood base (at least 59x52x3 cm). The baseshould span several joists and bebolted to the joists and not only tothe floorboards. Check for thepresence of pipes and cables.

If possible, install the machine in a cor-ner, as this is usually the most stablepart of the floor.

If the machine is installed on araised plinth, it has to be securedagainst slippage during spin usingretaining clips (available from theMiele Spare Parts Dept).

Installing the washing machineTo manoeuvre the machine out of itspacking case to its installlation site holdit by the edge of the lid where it pro-trudes to the rear of the washing ma-chine as well as by the handle re-cesses at the front.

Please note:

Do not lift the machine by the drumdoor.

Ensure that the machine feet andthe floor are dry to prevent the ma-chine from slipping during the spincycle.

Removing the transit fittings

To remove the left and right covers

1. Use a screwdriver to prise out thecover as illustrated.

2. Pull the cover forwards to remove.


55

Turn the left-hand transit bar 90.

Withdraw the left-hand transit bar.

Turn the right-hand transit bar 90.

Withdraw the right-hand transit bar.


56

Fit the covers on to the two holes.Then plug the holes as shown withthe caps.

Secure the transit bars to the back ofthe washing machine. Make surethat holes E are fitted over retainersD.

The washing machine must not bemoved without the transit bars inplace.Store the transit bars as shown orkeep them in a safe place for futureuse. They must be re-fitted if the ma-chine is to be moved again(e.g.when moving house).

Re-fitting the transit barsRe-fitting is carried out by reversing theprocedure.


57

Levelling the machine The machine must stand perfectly levelon all four feet to ensure safe andproper operation.

Incorrect installation may increase elec-tricity and water consumption and maycause the machine to move about.

False values may also show in theLoad % and Detergent % display.

The four adjustable screw feet areused to level the machine. All four feetare screwed in when the machine is de-livered.

Screwing out and adjusting the feet Gently tip the machine and prop itup using a solid wood wedge forexample, to ensure stability.

Make sure the machine does notslip as this could cause injury.

Loosen counter nut 2 with a spannerby turning it anti-clockwise, then turn

foot 1 together with the counternutand unscrew.

Put the machine back on all four feet.

Use a spirit level to check the ma-chine is standing level.

Hold the foot 1 firm using a pipewrench and using a spanner turn thecounternut 2 to the right firmly upagainst the housing.

All four counternuts must be firmlyup against the housing. Please alsocheck this for the feet which did notneed adjustment. Otherwise there isthe danger of the machine movingabout.


58

This washing machine is not suit-able for building under a worktop.

Washer and Dryer stackA Miele tumble dryer can be stackedwith the washing machine. A stackingkit* is necessary and can be pur-chased from the Miele Spare Parts Department.

Please note:

a Safety distance to wall:at least 2 cm

b Height: Stacking kit with pull-out shelf: approx. 172 cmstacking kit withoutpull-out shelf: approx. 170 cm

c Depth of the washer-dryer stack: approx. 63 cm

The load size sensor must be cali-brated to zero after the washing ma-chine has been installed and con-nected.See Before using for the first time.


59

Connection to the water supply

The Waterproof system

FunctionAt the heart of this leak protection sys-tem there is an electric safety valve,which works like an automatic stop-cock.

The Miele Waterproof system pro-tects from water damage in the follow-ing cases:

Protection in the event of a leakingmachine.

Any leaking water is collected in asump in the base of the appliance. Afloat switch switches off the safetyvalve electrically, no more water willflow into the machine. Water in thesuds container is pumped away.

Protection in the event of a leakingwater inlet hose.

Leaking water is fed into the sumpthrough the protective coveringwhich surrounds the inlet hose as asecond skin. The float switch swit-ches off the water supply.

Fitting the Waterproof systemThe machine should be connected to amains water supply in accordance withstandard regulations. The German auth-orities do not require it to have a non-re-turn valve as the washing machine hasbeen designed to comply with DVGWregulations (German Association ofGas and Water Engineers, see dataplate).

The machine is designed to operatewith a minimum flow pressure of 1 bar.There is a minimum flow pressure of 1bar if 5 litres of water flow into a suit-able container in 15 seconds.

The static water pressure must not ex-ceed 10 bar. If it is higher than 10 bar itis essential to fit a reducer valve.

Connection to the mains water supplyshould incorporate a mains stopcockwith 3/4 thread. The stopcock shouldbe fitted by a qualified plumber.

The connection point is subject tomains water pressure. Turn on thestopcock slowly and check forleaks. Correct the position of thewasher and union if appropriate.

This appliance is not suitable forconnection to hot water.


60

The plastic casing of the water connection contains an electric component. TheWaterproof system must only be connected to its own stopcock. It must not beconnected to mixer taps or similar and must not be fitted in areas where there isthe risk of water or other liquids reaching it.

Do not dip into any liquid.

The protective sleeve of the hosemust not be damaged.


61

MaintenanceIf you intend to unscrew the Waterproofsystem unit from the mains water sup-ply it is essential that the machine isfirst disconnected from the electricitysupply.

Only use a Miele Waterproof systemshould you ever need a replacement orextension. These are tested to with-stand pressure of at least 70 bar.

In order to protect the water inletvalves the dirt filter in the solenoidsafety valve connection must not beremoved.

AccessoriesShould the distance between the inletand the machine be greater than 1.5metres, a 1.5 metre long (metal) exten-sion hose is available from your Mieledealer or the Miele Spare Parts Depart-ment as an optional extra.

This hose is tested to withstand press-ures of up to 140 bar and can be usedas a flexible extension to the water sup-ply.


62

Connection to the drainagesystemThe machine drains via a drain pumpwith a delivery head of 1 metre*.

The drain hose is 1.5 m long. It mustnot be kinked as this restricts drainage.The swivel elbow at the end of the hosecan be turned in either direction, or canbe detached if required, with a sharptwist and pull.

* For a delivery head of more than 1 m(up to a maximum of 1.8 m) a secondduo-drain pump is available with thecorresponding kit from the Miele SpareParts Department or your Miele Dealer.

Drain hose connection:Direct into a sink: Hook the hoseover the edge and secure. Makesure that the water can flow freely toavoid flooding and to prevent waterfrom being sucked back into the ma-chine.

Connected to a floor gully.

Connected to a standpipe.

Connected to a plastic drain pipewith a rubber nipple. There is noneed to use a non-return valve.

If required, the drain hose can be ex-tended to a length of 5 m. The necess-ary parts can be purchased from theMiele Spare Parts Department or yourMiele dealer.


63

Electrical connection U.K.All electrical work should be carried outonly by a suitably qualified and compe-tent person, in strict accordance withnational and local safety regulations.

The appliance is supplied with a mainscable with moulded plug for connectionto a 230-240V mains supply. The volt-age, rated load and fuse rating aregiven on the data plate. Please ensurethese match the household mains sup-ply.

Connection should be made via afused plug and suitable switchedsocket which is easily accessible afterinstallation.

For extra safety it is advisable to installa residual current device (RCD), with atrip current of 30 mA (in accordancewith DIN VDE 0664, VDE 0100 Section739).

Do not connect via an extension lead.

ImportantThe wires in the mains lead are col-oured in accordance with the followingcode:

Green/yellow = earth

Blue = neutral

Brown = live

Where it is necessary to change plugs,if the colours of the wires in the mainslead of this appliance do not corre-spond with the coloured markingsidentifying the terminals of your plug,proceed as follows:

The wire which is coloured green andyellow must be connected to the termi-nal in the plug which is marked with theletter E or by the earth symbol z or col-oured green, or green and yellow.

The wire which is coloured blue mustbe connected to the terminal in theplug which is marked with the letter Nor coloured black.The wire which is coloured brown mustbe connected to the terminal in theplug which is marked with the letter Lor coloured red.

WARNING: THIS APPLIANCEMUST BE EARTHEDEnsure power is not supplied to the ap-pliance while installation work is beingcarried out.


64

Non-rewireable plugs BS 1363If this machine is fitted with a non-re-wireable plug, the following informationapplies:

If the socket outlets are not suitable forthe plug supplied with the product, itmust be cut off and an appropriateplug fitted. The fuse carrier and fuseshould be removed from the old plugand disposed of.

The plug cut from the flexible cordshould then be disposed of and on noaccount be inserted into any socketelsewhere in the house (electric shockhazard).

The fuse cover must be refitted whenchanging the fuse, and if the fusecover is lost, the plug must not be useduntil a suitable replacement is ob-tained. The colour of the correct re-placement cover is that of the colouredinsert in the base of the plug, or the col-our that is embossed in words on thebase of the plug (as applicable to thedesign of plug fitted).

Replacement fuses should be ASTA ap-proved to BS 1362 and have the cor-rect rating. Replacement fuse coversmay be purchased from your local elec-trical supplier or Service agent.


65

Consumption data Programme(without any

additional optionsor programmable

functions)

Load Consumption dataEnergy Water Programme timein kWh in litres normal Short

COTTONS95C 5.0 kg 1.70 49 1 hr 54 mins 1 hr 22 mins

60C1) 5.0 kg 0.95 49 1 hr 57 mins 1 hr 13 mins

40C 5.0 kg 0.50 49 1 hr 57 mins 1 hr 03 mins

MINIMUM IRON40C 2.5 kg 0.45 58 1 hr 22 mins 47 mins

DELICATES30C 1.0 kg 0.35 65 57 mins 45 mins

Silks /30C 1.0 kg 0.25 39 37 mins 27 mins

WOOLLENS /30C 2.0 kg 0.23 35 40 mins

1) EN 60456 test programme

Consumption data can vary from the nominal values given depending on waterpressure, water hardness, water inlet temperature, room temperature, type andvolume of load, fluctuations in the electricity supply and any additional optionsselected.

N.B.

Consumption data obtained from a machine tested in Germany.

Consumption data

66

Technical dataHeight 85 cm

Width 59.5 cm

Depth 58.0 cm

Depth with door open 94.5 cm

Weight 94 kg

Maximum floor load 1600 Newton (approx. 160 kg)

Capacity 5 kg dry laundry

Voltage see data plate

Rated load see data plate

Fuse rating see data plate

Consumption data see Consumption data

Water flow pressure min. 1 bar (100 Pa)

Water flow pressure max. 10 bar (1000 Pa)

Drain pump head max. 1 m

Drain pump length max. 5 m

Test certificates awarded Radio/TV suppression, VDE

Technical data

67

Alteration rights reserved/000 0900

This paper consists of cellulose which has been bleached without the use of chlorine.

Caring for our environmentDisposal of the packing material 2Disposal of your old appliance 2

Warning and safety instructions 6Installation and connectionFront view 53Rear view 54Installation surface 55Installing the washing machine 55Removing the transit fittings 55Re-fitting the transit bars 57Levelling the machine 58Screwing out and adjusting the feet 58Washer and Dryer stack 59

Connection to the water supply 60Connection to the drainage system 63Electrical connection U.K. 64

Description of the applianceSpecial programmes 9Delicates and Silks / programmes 9Load size indicator 9Dispensing recommendation 9Water plus system 9Delay start h/mins 10Time remaining display 10Locking functions (programme locking, system lock) 10Future updates (PC) 10

Control panel 11Multi-function display 12

Important control panelfeatures 13Programme selector 13Additional option buttons 13Spin button with indicator lights 13

Before using for the first timeCalibrating to zero 14Washing environmentally and economically 15How to wash correctlyBefore washing 16Programme chart 17

Selecting a programme 20Additional options 22Delay start 23

At the end of a programme 24Brief instructions 24Adding or removing laundry after a programme has started 25Interrupting a programme 26Skipping a programme stage 26Selecting a different programme 26Programme sequence 27

DetergentWater softeners 29Washing with several components 29Fabric conditioners and liquid starch 30Automatic dispensing of fabric conditioners or liquid starch to laundryat the end of a programme 30Adding fabric conditioner or liquid starch separately 30

Dye removers / dyes 30

Locking functionsElectronic programme locking 31Electronic system lock 32

Documents

W 377