1 | P a g e

Capitals & Squares LLC Product Catalog ©2011

Heavy and Light Machinery

Voyager Spray Systems (SprayDragon™):

Award Winning Voyager™ Portable

Cold/Warm/Hot Spray System

Voyager Spray System™:

Heated or Unheated

Portable Cold Spray System

Plural Component Spray Gun

AC or Battery-Powered

Travels Where Trailers Cannot

Voyager Spray™ Portable Cold Spray System chosen by the Polyurea

Development Association as winner of the prestigious 2005 PDA Platinum

Technology Development Award.

The Voyager™ Portable Cold Spray System is certainly not designed to

replace the high-temperature, high-pressure spray equipment. Rather, it is

designed to enable an applicator already using hot spray to access new

markets where hot spray equipment displays limitations. Additionally,

Voyager™ is designed to allow a greater number of potential

2 | P a g e

applicators to enter into the high performance

coatings industry.

Easier Entry into High Performance

Coatings Application

No Generator Required! Runs on 110V 15A or

On-Board Battery

Fits Through 36” Door; Allows Access to More Jobs

No Long Hoses Laying Around

Less Potential Air Contamination and Less Overspray Concerns

Simplified Use, Maintenance, and Repairs

Portable Cold Spray System

Portability Fits through a 36" doorway, letting you do a

greater number and different types of jobs.

No spray booth equipment!

3 | P a g e

Warm Spray Mode Use more 2K formulas than cold spray, and

get better physical properties

Low Power Requirements Spray (warm or cold) using regular 110V,

15A

On-Board Battery Spray in unheated mode where there is no

power source available...

VOYAGER™ Patented

Pump System designed

for plural component spray

pumps

Years of planning and development have

gone into giving you a state-of-the-art

positive displacement plural component

spray pump system that you can depend on

Seize -Proof Plural

Component Spray Pumps

You will not have to worry about having to

spend money to rebuild your pumps, or time

away from the job

Application of 2K Coatings

or Joint Fill

Multiple uses help you maximize your time

and investment

Sprays 20 Gallons without

stopping

Saves money and reduces troublesome

coating lapping

LOW COST Spray Coating

Equipment

Takes less jobs to get back your investment -

This means more money stays where it

belongs: IN YOUR POCKET!!

Fluid Transfer Capacity You can neatly and easily break down drums

into pails or fill cartridges; Eliminates pigment

settling problems of cartridge systems; Gives

you a significant cost savings over buying

4 | P a g e

pre-filled cartridges.

Easy Clean-up Saves you time after every job

Quick System Changeover Saves time in changing coating systems

Bi-Directional Pump

System

Avoids wasting expensive material; Makes

clean-up easier

Intelligent Fail-Safe Patent pending invention prevents over-

pressurized hoses, thus protecting your

workers and job site

Plural Component Pump

System

Pressurized hoses, thus protecting your

workers and job site

Low-Pressure Coating

Equipment

With low pressure coating equipment you

can feel safer about your health knowing

there is less material atomized into the air –

and– reduces overspray

Compatibility with Pails

and Drums

You can save time and money normally

associated with cold spray systems that are

limited to smaller container size

Air Dryer System You can save time and money normally

associated with cold spray systems that are

limited to smaller container size

Retractable Air Hose Self contained unit; No additional items need

to be purchased

5 | P a g e

Storage Trays Easily stores your supplies where you need

them

Locking Wheels Stabilizes your equipment, thus protecting

your workers and job site

On Board AC Power

Outlet

Eliminates trip/fall hazard of multiple power

cords

New Application Markets with the Low Pressure Portable Spray

System

Uses and applications:

Serving the DIY'er, professional installer, distributor, private label, and OEM customers with product

solutions featuring green, environmentally friendly,

applicator safe, and process optimized coating systems.

One Purchase – Endless Markets

clearbedliner - Clear, UV stable colors, metallic, and black spray on

bed liner coating systems; clear chip and stone protection; clear

leading edge protection; clear spoiler and wing protection; custom

chassis coatings; sand rail coatings; off-road vehicle protection;

metallic texture; clear RV fascia protection; marine coatings; clear UV

stable boat deck coatings; boat holds; fishing vessel coatings; water

6 | P a g e

feature coatings; speaker box

coatings; scenography; metallic

decorative coatings for multiple

markets; clear thick film industrial

coatings; custom high impression

protective coatings and more...

surewoodsystems – Play-scapes;

decks; docks; trailer floors; RV floors; public shower areas;

boardwalks; picnic tables; wood furniture; playground surfaces;

gazebos; porch floor coatings; wood floors; ramps for handicapped

and more...

dynasolv - Concrete sealer; crack filling; roofing; flashing;

waterproofing; flame-proofing; garage floors; concrete floors; caulking

and sealing; RV floors; ramps for handicapped; kitchen counter

restoration; outdoor kitchens; bathroom waterproofing; bathroom stall

repair; active leak stopping; below grade waterproofing; block, paver,

and stone coatings; grout systems and grout repair; chimney repair;

chimney grout sealing; asphalt roofing repair; ice dam protection;

foundation sealant and waterproofing; cementations system

additives; grout sealing; water-sealing; sidewalk repair; concrete

spalling prevention systems; concrete spalling; concrete spalling

repair; flexible concrete systems; anti-graffiti coatings; manhole

sealants; sewer and below grade culvert waterproofing coatings;

E.I.F.S. coating systems; tank linings; UV stable coatings; pool, pond,

and water feature linings; and more. Our products include both raw

material products and formulated products. Our services include:

custom raw material formulation; contract research and development;

7 | P a g e

custom coating formulation;

contract coating equipment

and process development;

private labeling; process

optimization; toll

manufacturing, cure on

demand, and more...

linersolution - Truck bed liner

restoration; UV roll on bed

liner systems; truck bed dent repair systems; automotive dent repair

systems; RV floor restoration systems; spray on truck bed liner

materials and more...

coldsprayfoam - Supporting cold, warm, and hot spray installers with

Insulation systems; waterproofing systems; building structure

stabilization applications; moisture-proofing, noise reducing systems;

floatation applications; Scenography and more...

Voyager Portable Spray System Overcomes These Industry Issues

There have been some impressive breakthroughs in hot-spray equipment

over the years and there are many applications for polyurea systems that

will require hot-spray equipment for a number of reasons. However, this

section will objectively discuss some of the barriers that prevent existing

polyurea applicators from entering new polyurea application markets, as

well as potential new applicators from entering the polyurea industry.

8 | P a g e

Economic

Polyurea market applications that

demand the specialized high-pressure

and high-temperature equipment create

an economic barrier to many potential

polyurea systems applicators. This

barrier can hurt the polyurea industry as

a whole in two significant ways. First,

most contractors that may be interested in applying polyurea systems do

not have the financial resources to purchase their own hot-spray

equipment. This limits the number of new applicators that would use

polyurea systems, thereby hindering the growth of the polyurea industry as

a whole. Secondly, the high cost of this equipment, in turn, greatly reduces

the potential number of non-industrial markets that could otherwise be

profitably pursued by a polyurea systems applicator.

Electrical Access

Hot-spray equipment requires a significant demand for electrical access. It

is common for hot-spray to need 220V with amps ranging from 75 to 90.

Therefore, the applicator is generally required to bring his own electrical

supply. This is usually in the form of a tow-behind generator, which adds to

the cost of equipment.

Portability

Many market applications are simply inaccessible for the existing hot-spray

equipment that is often in a trailer. In some cases hoses that can reach up

9 | P a g e

to 200’ without significant loss of pressure

are the answer. However, there are many

job applications greater than 200’ away

from trailer access that require additional

hoses and pumps.

Safety

Some jobs that are within reach of the 200’

hot-spray hose may have a property

manager/owner who is reluctant or unwilling to allow the hose to be

stretched out between the trailer and the area to be coated because of the

potential for a trip-fall hazard for patrons or guests. These conditions may

require additional personnel in order to continuously monitor the entire

length of the hose.

Application safeguards

Hot-spray equipment that uses high-pressure carries risk to all personnel

exposed to the atomized coating material. Therefore, interior ventilation

shafts and ducts will have to be blocked and secured to reduce the chance

of air contamination. An additional risk factor is that some polyurea system

suppliers continue to formulate with heightened levels of monomer or

solvent. This greatly increases the chance for health problems and,

therefore, increases the legal liability potential of the contractor during the

application process.

Overspray

The high-pressure of hot-spray can potentially result in significant physical

10 | P a g e

property damage caused by overspray.

While there is also overspray risk with

cold-spray equipment, most high-

pressure equipment sprays a much

greater distance than its low-pressure

counterpart.

Technical knowledge

The final barrier discussed here is the

heightened technical expertise required

to operate, troubleshoot, maintain, and

repair hot-spray equipment. While training is certainly available, personnel

turnover and continuing developments in the equipment make the job of

assuring technical competency an ongoing battle.

A Third Option for Equipment

That’s right. Polyurea applicators now possess a third option for polyurea

systems spray equipment. Arguably the most common equipment is the

high-temperature, high-pressure, plural-component spray equipment which

uses a spray gun, commonly referred to as “hot-spray”. The second option

is the low-pressure, non-heated, plural-component spray equipment, or

“cold-spray”, which uses either a spray gun or a cartridge system. The

latest entry to the market is a medium-temperature, low-pressure, plural-

component spray equipment that is also applied through a spray gun,

which we will term “warm-spray.”

11 | P a g e

Summary

The truth is that the polyurea industry and

related industries will benefit from polyurea

becoming known and accepted universally in

a multitude of applications. We include

everybody: the raw materials suppliers,

system suppliers, and equipment suppliers,

applicators, supporting contractors, and

supporting businesses. To accomplish this

acceptance the industry must come to terms with the knowledge that one

type of application equipment does not meet the needs of all markets or

applicators. In the high performance coatings market there is room for hot-

spray, cold-spray, and the new emerging warm-spray. With its new

Voyager™ Portable Spray System, Capitals & Squares LLC is “Spanning

the Gulf Between Needs and Solutions.”

The “SEVEN DEGREES OF GREEN™"

Level 7: EXTREME GREEN™

•Design sustainable coating systems to utilize bio-renewable resources,

and/or post consumer / post industrial content

•CMT Auto/Truck/Trailer Products: Brush on Bed Liner, Bed Liner Refurb

Kit, RV / Trailer Floor Kit

Level 6: TOTALLY GREEN

•100% Solids

12 | P a g e

•Zero VOC’s and Zero Solvents

•Reduce Carbon Footprint Further By:

•Designing superior service life

coatings to eliminate “frequent”

recoating

•Designing superior service life

coatings to eliminate multiple freight

shipments

•CMT Auto/Truck/Trailer Products:

Crystalcare, Crystaledge,

Black Spray on Bed Liner Material, CrystaLiner

•CMT Constuction Coatings: Dyna-Pur, Crack Filler, Injection Gel

Level 5: GREEN PLUS

•Become and maintain 100% Solids content for coating products

•Less than 1% non-solvent volatiles

•Minimize freight carbon footprint by eliminating water from products

Level 4: GREEN

•Increase solids content – solvents are not the only materials that “flash off”

•Greater than 90% solids or water based

•Less than 5% non-solvent volatiles

13 | P a g e

Level 3: GREEN-LITE

•Obtain Zero Solvent and Zero VOC’s

Content products

•Less than 10% non-solvent volatiles

Level 2: SUB-GREEN

•Reduce Solvents in products used

•Zero VOC’s but still contains solvents

Level 1: GREEN-LESS

•Reduce VOC’s in products used

•Still contains VOC’s

Our Manufacturer and Partner: Creative Material Technologies

Product Highlights at CMT Ltd:

Palmer, MA – (March 31, 2010) Creative Material Technologies, Ltd (CMT)

is pleased to introduce CrystalEdge™; their newest, technologically

advanced, liquid applied, clear paint protection coating system.

Now, protect the front nose, rear trunk area, door edges, rocker panels and

more on any vehicle, without any patterns or expensive equipment to buy.

CrystalEdge™ has no solvents or VOC’s, provides outstanding

14 | P a g e

performance, and allows a tapered

edge buffing option.

Up until now, getting into the paint

protection market would have

required thousands of dollars in

equipment, days of training, and

painstaking application precision,

not to mention less than state of the art results and hundreds of patterns to

stock. Now, with less than $100 and minimal instruction, CMT’s liquid

applied CrystalEdge™ will change the way you reach new levels of

profitability. Watch Demo on YouTube.

“Solving problems is what we excel in and enabling automotive

professionals to thrive in adversarial times is one of those problems that we

are addressing,” commented John Becker IV, President of CMT. “All along,

we have created products that offer the opportunity for new and innovative

profit centers that create jobs and help revitalize our economy. It isn’t the

same world it used to be. Now, we are not only inventing new products and

technologies, but also eliminating business and structural barriers to the

installer’s success. Every person needs to understand that their success is

dependent upon helping others meet their needs. This responsibility and

understanding should pervade our companies, our industry and our nation.”

Unlike other paint protection systems, CrystalEdge™ does not require

anything special other than a unique roller (included in the kit) and the

proprietary liquid paint protection coating material. One kit provides enough

15 | P a g e

coverage for the nose area of

two vehicles. CrystalEdge™

is the perfect add-on product

for body shops, used and

new car dealers, and mobile

technicians. CrystalEdge™

can be used on cars, trucks,

heavy trucks, equipment,

RV’s, motorcycles and

trailers, to name only a few

applications.

With more than 30 patents between them, CMT’s R&D personnel have

over 70 years of coating formulation and over 22 years specializing in

formulating 100% solids, eco-friendly coating systems in the polyurea

based coatings industry. CMT’s technologies equip some market leaders to

do what others consider to be “impossible” while empowering those on the

cutting edge to make capital where their competition cannot.

Voyager Spray - 2005 PDA Platinum Technology Development Award

Palmer, MA - Creative Material Technologies, Ltd. (CMT), a local

manufacturer of high performance, zero VOC coatings for multiple

applications, is proud to announce that they have been chosen by the

Polyurea Development Association as the winner of the prestigious 2005

PDA Platinum Technology Development Award.

The Polyurea Development Association (PDA) is the trade association for

16 | P a g e

the international community

of polyurea equipment

manufacturers, polyurea

system suppliers, and

polyurea applicators.

The PDA Platinum

Technology Development

Award is geared toward

advancements in polyurea technology, and recognizes the most significant

development in the polyurea industry in the past year. While new polyurea

formulations, new technology and application innovations are all candidates

for this award, CMT has designed and manufactured a new piece of

equipment which can spray two component polyurea systems with low

pressure, either heated or unheated. This lower cost two-component spray

machine will allow many more applicators to enter the industry and apply

high performance polyurea coatings. The equipment, titled “Voyager”, uses

novel pump technology to solve current application equipment problems.

Patents are pending. Developments were judged on beneficial

contributions to the polyurea industry and the depth of effect on the

polyurea industry, as well as the uniqueness and innovativeness of the

development.

Voyager Advantages:

The Voyager Spray Pump can spray or pump more types of 2K products

than other systems. It allows you to spray using a regular 110V; 15A power

17 | P a g e

source and the on-board battery allow you to

spray even where there is no power source

available. The Voyager can spray a virtually

unlimited volume of material without

stopping and its fluid transfer capacity neatly

and easily breaks down drums into pails or

fills cartridges. The Voyager provides you

with a significant cost savings over buying

pre-filled cartridges and it efficiently

eliminates pigment-settling problems found in most cartridge systems.

•completely portable - less than 40 pounds

•application of 2K coatings, polyurethane foam, or crack/joint fill

•quick system changeover saves time in changing coating systems

•low-pressure system means less material atomized into the air

•reduces overspray

•patent pending pumping mechanism pushes and pulls material, thereby

reducing waste

•purchase includes one day specialized training

Applications allow for more revenue sources including, but not limited to,

truck bed liners, deck/dock coatings, boat coatings, concrete floors/decks,

spray foams, waterproofing, and roof coatings.

Capitals & Squares LLC in partnership with CMT Ltd. offers a wide variety

of spray on applications requiring no spray booth, and innovative low cost

spray equipment through Voyager Spray Systems for installing spray on

bed liners. With a multitude of coating formulations designed specifically to

18 | P a g e

address the unique requirements of different applications, we are able to

assist customers in solving real world problems with high-performance

product solutions for the homeowner, professional installer, and OEM

customers.

Contact us at 248-629-9524, Capitals & Squares LLC ©2011 Business Department Doc.