-
7/30/2019 Voice Commend
1/3
186
1. VOICE COMMAND SYSTEM OPERATION
1. VOICE COMMAND SYSTEM
XType A (Two direction steering switch)
XType B (Four direction steering switch)
Talk switch
z Press the talk switch to start the voicecommand system.
z Press and hold the talk switch to cancelthe voice command
system.
Back switch
z Press the back switch to return to the pre-vious screen.
The voice command system enables
the navigation, audio and hands-free
systems to be operated using voice
commands.
INFORMATION
Voice recognition language can bechanged.(See SELECTING A
LAN-GUAGE on page 198)
USING THE VOICECOMMAND SYSTEM
The actual design and switch position
may differ depending on the vehicle.
For details, see the Pictorial index of
Owners Manual.
STEERING SWITCHES FORTHE VOICE COMMAND
SYSTEM
MICROPHONE
It is unnecessary to speak directly intothe microphone when
giving a com-
mand.
http://08-1.pdf/http://08-1.pdf/http://08-1.pdf/http://08-1.pdf/
-
7/30/2019 Voice Commend
2/3
187
1. VOICE COMMAND SYSTEM OPERATION
6
VOICECOMMAND
SYSTEM
1 Press the talk switch.
2 After a beep sounds, say the desiredcommand or touch the
desired com-
mand.
: The icon will be displayed if the user
can speak a command.
: Touch to adjust the volume of the
voice guidance volume.
INFORMATION
Wait for the confirmation beep before
speaking a command. Voice commands may not be recognized
if:
Spoken too quickly.
Spoken at a low or high volume.
The windows are open.
Passengers are talking while voicecommands are spoken.
The air conditioning speed is set high.
The air conditioning vents are turnedtowards the microphone.
In the following conditions, the systemmay not recognize the
command prop-erly and using voice commands may notbe possible:
The command is incorrect or unclear.Note that certain words,
accents orspeech patterns may be difficult for thesystem to
recognize.
There is excessive background noise,such as wind noise.
VOICE COMMAND SYSTEM
OPERATION
z The voice command system is acti-vated, press the talk switch
to skip thecurrent dialog state.
z In case of an activated speech recog-nizer waiting for input,
press the talkswitch to restart the speech recognizer.
-
7/30/2019 Voice Commend
3/3
188
1. VOICE COMMAND SYSTEM OPERATION
DISPLAYING THE COMMAND LIST
SCREEN
1 Say More commands or touchingMore commands on the voice
com-
mand main menu screen.
2 Say the desired command or touch the
desired command.
3 Say the desired command or touch the
desired command.
z The command list is read out and the cor-responding command is
highlighted. Tocancel this function, press the talk switch.
